[RBW] Re: Hunqa photos, and Albatross HB question

2011-05-03 Thread Thomas Lynn Skean
Hi, Bill. I'm glad the folks at RBW are helping. I'm sure you'll stabilize the bar unless the stem itself is problematic. I use Albatross bars with a Dirt Drop 100 with a shim with mo problems, even on torn-up roads and hoof-beaten trails. Maybe not as bad as what you've got. But I weigh ~245. Ne

[RBW] Re: Hunqa photos, and Albatross HB question

2011-05-02 Thread Bill Rhea
I spoke with Jay who consulted Mark at Riv. Next logical step is blue loc-tight on the bar and shims. Gnurling (gnarling?) or roughing up the point of contact was discussed, but is better suited for shim-free situations. Stay tuned. If that doesn't work I'll consider an old-school 25.5mm mounta

[RBW] Re: Hunqa photos, and Albatross HB question

2011-05-02 Thread Bill Rhea
Thanks for the reply, Minh. If the stem were about ready to close on itself (i.e., get to the point where both sides of the stem clamp were touching) then I would try the bigger ship option. Never underestimate the power of the beer can shim :-)However there is still plenty of room for the st

[RBW] Re: Hunqa photos, and Albatross HB question

2011-05-02 Thread Minh
I think you need more shim, soda can? On May 2, 5:08 pm, Bill Rhea wrote: > Thanks for mentioning this Jeremy, but yup indeed, I've got a Nitto > shim in there to drop the clamp diameter down to 25.4mm. > > I wonder if anybody has a trick o' the trade?  The bar, stem, shims > and clamp are devoid

[RBW] Re: Hunqa photos, and Albatross HB question

2011-05-02 Thread Bill Rhea
Thanks for mentioning this Jeremy, but yup indeed, I've got a Nitto shim in there to drop the clamp diameter down to 25.4mm. I wonder if anybody has a trick o' the trade? The bar, stem, shims and clamp are devoid of grease (though the binder bolt has been greased liberally). -br On May 2, 1:18 

[RBW] Re: Hunqa photos, and Albatross HB question

2011-05-02 Thread Bill Rhea
LOL Yep, the normally shy Hunqa-beast did not bolt. I baited it with Boeshield on a Ritz cracker ;-) Seriously, these photos were taken not far from my home in NorCal, in and around Long Ridge Open Space Preserve, on the SF Peninsula: http://www.openspace.org/preserves/pr_long_ridge.asp I also

[RBW] Re: Hunqa photos, and Albatross HB question

2011-05-02 Thread Jeremy Till
This may be obvious enough that you neglected to mention it, but do you have a shim in the bar clamp, since the lugged stem is 26.0 and Albatrosses are 25.4? On May 2, 12:14 pm, Bill Rhea wrote: > I spent some time on favorite trails yesterday and snapped a few cell > phone cam photos of my 62cm