Hello,
This series improves the current models of the Aspeed machines in QEMU
and adds new ones. It also prepares ground for the models of the
Aspeed AST2600 SoC by calculating the model typenames using the SoC
name.
You will find patches for :
- DMA support for the SMC controller, now using ad
From: Rashmica Gupta
Signed-off-by: Rashmica Gupta
Reviewed-by: Cédric Le Goater
Signed-off-by: Cédric Le Goater
---
include/hw/arm/aspeed_soc.h | 3 +++
hw/arm/aspeed_soc.c | 17 +
2 files changed, 20 insertions(+)
diff --git a/include/hw/arm/aspeed_soc.h b/include/
From: Rashmica Gupta
GPIO pins are arranged in groups of 8 pins labeled A,B,..,Y,Z,AA,AB,AC.
(Note that the ast2400 controller only goes up to group AB).
A set has four groups (except set AC which only has one) and is
referred to by the groups it is composed of (eg ABCD,EFGH,...,YZAAAB).
Each set
The FMC controller on the Aspeed SoCs support DMA to access the flash
modules. It can operate in a normal mode, to copy to or from the flash
module mapping window, or in a checksum calculation mode, to evaluate
the best clock settings for reads.
The model introduces two custom address spaces for D
There are no QEMU Aspeed machines using the SoCs "ast2400-a0" or
"ast2400".
Signed-off-by: Cédric Le Goater
---
hw/arm/aspeed_soc.c | 26 --
1 file changed, 26 deletions(-)
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index 04480875d0d8..3aa73d2438ef 100644
---
When doing calibration, the SPI clock rate in the CE0 Control Register
and the read delay cycles in the Read Timing Compensation Register are
set using bit[11:4] of the DMA Control Register.
Signed-off-by: Cédric Le Goater
Acked-by: Joel Stanley
Reviewed-by: Peter Maydell
---
hw/ssi/aspeed_smc
and use a class AspeedSCUClass to define each SoC characteristics.
Signed-off-by: Cédric Le Goater
---
include/hw/misc/aspeed_scu.h | 15 +++
hw/arm/aspeed_soc.c | 3 +-
hw/misc/aspeed_scu.c | 83
3 files changed, 64 insertions(+), 37 de
Improve the naming of the different controller models to ease their
generation when initializing the SoC. The rename of the SMC types is
breaking migration compatibility.
Signed-off-by: Cédric Le Goater
---
include/hw/arm/aspeed_soc.h | 3 ---
hw/arm/aspeed_soc.c | 25 --
Emulate read errors in the DMA Checksum Register for high frequencies
and optimistic settings of the Read Timing Compensation Register. This
will help in tuning the SPI timing calibration algorithm. Errors are
only injected when the property "inject_failure" is set to true as
suggested by Philippe.
The APB frequency can be calculated directly when needed from the
HPLL_PARAM and CLK_SEL register values. This removes useless state in
the model.
Signed-off-by: Cédric Le Goater
---
include/hw/misc/aspeed_scu.h | 8 +++-
hw/misc/aspeed_scu.c | 25 +
hw/timer
From: Christian Svensson
This patch adds the missing checksum calculation on normal DMA transfer.
According to the datasheet this is how the SMC should behave.
Verified on AST1250 that the hardware matches the behaviour.
Signed-off-by: Christian Svensson
Reviewed-by: Joel Stanley
Signed-off-b
On 2019/9/4 0:46, Dr. David Alan Gilbert wrote:
* Ying Fang (fangyi...@huawei.com) wrote:
Address Sanitizer shows memory leak in migrate_params_test_apply
migration/migration.c:1253 and the stack is as bellow:
Direct leak of 45 byte(s) in 9 object(s) allocated from:
#0 0xbd7fc1db in
Hi,
On 9/4/19 7:46 AM, Tian, Kevin wrote:
>> From: Peter Xu [mailto:pet...@redhat.com]
>> Sent: Wednesday, September 4, 2019 1:37 PM
>>
>> On Wed, Sep 04, 2019 at 04:23:50AM +, Tian, Kevin wrote:
From: Peter Xu [mailto:pet...@redhat.com]
Sent: Wednesday, September 4, 2019 9:44 AM
>>>
* Jagannathan Raman (jag.ra...@oracle.com) wrote:
> Allow RAM MemoryRegion to be created from an offset in a file, instead
> of allocating at offset of 0 by default. This is needed to synchronize
> RAM between QEMU & remote process.
> This will be needed for the following patches.
>
> Signed-off-b
On Tue, Sep 03, 2019 at 03:11:08PM -0400, Ian Kelling wrote:
> At FSF, we've been working on this issue recently. I was planning to
> send a general message to qemu-devel, but someone brought it up in a
> thread below, so I'm doing it now.
>
> Currently, a message sent to qemu-devel from a domain
On Tue, 3 Sep 2019 at 18:00, Mark Cave-Ayland
wrote:
>
> On 03/09/2019 14:15, Peter Maydell wrote:
>
> > Mark -- ping? Richard has reviewed this series; do you want
> > more time to test it, or should I just apply it to master
> > if you don't have any other pending sparc patches?
>
> Yes, sorry -
On Tue, 3 Sep 2019 at 18:00, Mark Cave-Ayland
wrote:
>
> On 03/09/2019 17:08, Richard Henderson wrote:
>
> > The following changes since commit fec105c2abda8567ec15230429c41429b5ee307c:
> >
> > Merge remote-tracking branch
> > 'remotes/kraxel/tags/audio-20190828-pull-request' into staging (2019
On Thu, 29 Aug 2019 at 07:08, David Gibson wrote:
>
> The following changes since commit 23919ddfd56135cad3cb468a8f54d5a595f024f4:
>
> Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20190827' into
> staging (2019-08-27 15:52:36 +0100)
>
> are available in the Git repository at:
>
>
On Tue, Sep 03, 2019 at 03:06:24PM -0400, John Snow wrote:
>
>
> On 9/3/19 3:02 PM, Eric Blake wrote:
> > [adding libvirt list]
> >
> > On 9/3/19 1:50 PM, John Snow wrote:
> >>
> >>
> >> On 9/3/19 10:56 AM, Eric Blake wrote:
> >>> Mention the preferred URI form, especially since NBD is trying to
On Tue, Sep 03, 2019 at 04:37:33PM -0400, Jagannathan Raman wrote:
> Defines proxy-link object which forms the communication link between
> QEMU & emulation program.
> Adds functions to configure members of proxy-link object instance.
> Adds functions to send and receive messages over the communica
On Wed, Sep 04, 2019 at 09:54:12AM +0200, Auger Eric wrote:
> Hi,
>
> On 9/4/19 7:46 AM, Tian, Kevin wrote:
> >> From: Peter Xu [mailto:pet...@redhat.com]
> >> Sent: Wednesday, September 4, 2019 1:37 PM
> >>
> >> On Wed, Sep 04, 2019 at 04:23:50AM +, Tian, Kevin wrote:
> From: Peter Xu [m
On Fri, Aug 09, 2019 at 06:31:12PM -0700, Richard Henderson wrote:
> As promised, an experiment in unifying the checks.
>
> I believe that I've tested for all of the same conditions, modulo the
> timing at which they are emitted. As before, only one error is reported,
> so if multiple errors exis
On Tue, Sep 03, 2019 at 02:05:46PM +0800, Tian, Kevin wrote:
> > From: Alex Williamson [mailto:alex.william...@redhat.com]
> > Sent: Saturday, August 31, 2019 12:15 AM
> >
> > On Fri, 30 Aug 2019 07:25:59 +
> > "Tian, Kevin" wrote:
> >
> > > > From: Alex Williamson [mailto:alex.william...@re
* Jagannathan Raman (jag.ra...@oracle.com) wrote:
> Some of the initialization helper functions w.r.t monitor & chardev
> in vl.c are also used by the remote process. Therefore, these functions
> are refactored into a shared file that both QEMU & remote process
> could use.
>
> Signed-off-by: Elen
* Jagannathan Raman (jag.ra...@oracle.com) wrote:
> Trim down the list of HMP commands available for storage class of
> remote processes.
>
> Signed-off-by: Elena Ufimtseva
> Signed-off-by: John G Johnson
> Signed-off-by: Jagannathan Raman
> ---
> New patch in v3
>
> Makefile.objs
This series is an attempt to provide device memory hotplug support
on ARM virt platform. This is based on Eric's recent works here[1]
and carries some of the pc-dimm related patches dropped from his
series.
The kernel support for arm64 memory hot add was added recently by
Robin and hence the gues
From: Eric Auger
This patch adds the memory hot-plug/hot-unplug infrastructure
in machvirt. The device memory is not yet exposed to the Guest
either through DT or ACPI and hence both cold/hot plug of memory
is explicitly disabled for now.
Signed-off-by: Eric Auger
Signed-off-by: Kwangwoo Lee
S
From: Samuel Ortiz
The ACPI Generic Event Device (GED) is a hardware-reduced specific
device[ACPI v6.1 Section 5.6.9] that handles all platform events,
including the hotplug ones. This patch generates the AML code that
defines GEDs.
Platforms need to specify their own GED Event bitmap to describ
This is in preparation for adding support for ARM64 platforms
where it doesn't use port mapped IO for ACPI IO space. We are
making changes so that MMIO region can be accommodated
and board can pass the base address into the aml build function.
Also move few MEMORY_* definitions to header so that o
Generate Memory Affinity Structures for PC-DIMM ranges.
Also, Linux and Windows need ACPI SRAT table to make memory hotplug
work properly, however currently QEMU doesn't create SRAT table if
numa options aren't present on CLI. Hence add support(>=4.2) to
create numa node automatically (auto_enable
For machines 4.2 or higher with ACPI boot use GED for system_powerdown
event instead of GPIO. Guest boot with DT still uses GPIO.
Signed-off-by: Shameer Kolothum
Reviewed-by: Eric Auger
---
v9 --> v10
-Eric's R-by
v8 --> v9
-Re-arranged patches 8 & 9 from v8 based on Igor's comments.
v7 -->
From: Samuel Ortiz
With Hardware-reduced ACPI, the GED device will manage ACPI
hotplug entirely. As a consequence, make the memory specific
events AML generation optional. The code will only be added
when the method name is not NULL.
Signed-off-by: Samuel Ortiz
Signed-off-by: Shameer Kolothum
This initializes the GED device with base memory and irq, configures
ged memory hotplug event and builds the corresponding aml code. With
this, both hot and cold plug of device memory is enabled now for Guest
with ACPI boot. Memory cold plug support with Guest DT boot is not yet
supported.
As DSDT
This is in preparation of using GED device for
system_powerdown event. Make the powerdown notifier
registration independent of create_gpio() fn.
Signed-off-by: Shameer Kolothum
Reviewed-by: Eric Auger
---
hw/arm/virt.c | 12
include/hw/arm/virt.h | 1 +
2 files changed, 5
Documents basic concepts of ACPI Generic Event device(GED)
and interface between QEMU and the ACPI BIOS.
Signed-off-by: Shameer Kolothum
Reviewed-by: Eric Auger
---
docs/specs/acpi_hw_reduced_hotplug.txt | 60 ++
1 file changed, 60 insertions(+)
create mode 100644 docs/
This patch is in preparation for adding numamem and memhp tests
to arm/virt board so that 'make check' is happy. This may not
be required once the scripts are run and new tables are
generated with ".numamem" and ".memhp" extensions.
Signed-off-by: Shameer Kolothum
---
I am not sure this is the ri
This adds numamem and memhp tests for arm/virt platform
Signed-off-by: Shameer Kolothum
---
tests/bios-tables-test-allowed-diff.h | 1 +
tests/bios-tables-test.c | 49 +++
2 files changed, 50 insertions(+)
diff --git a/tests/bios-tables-test-allowed-diff.h
To synchronize the time when QEMU is running longer under the Valgrind,
increase the sleeping time in the test 247.
Signed-off-by: Andrey Shinkevich
Reviewed-by: Vladimir Sementsov-Ogievskiy
Reviewed-by: John Snow
---
tests/qemu-iotests/247 | 6 +-
1 file changed, 5 insertions(+), 1 deleti
In the current implementation of the QEMU bash iotests, only qemu-io
processes may be run under the Valgrind with the switch '-valgrind'.
Let's allow the common.rc bash script running all other QEMU processes,
such as qemu-kvm, qemu-img, qemu-ndb and qemu-vxhs, under the Valgrind.
v8:
01: Fix fo
The new function _casenotrun() is to be invoked if a test case cannot
be run for some reason. The user will be notified by a message passed
to the function. It is the caller's responsibility to make skipped a
particular test.
Suggested-by: Kevin Wolf
Signed-off-by: Andrey Shinkevich
Reviewed-by:
With the '-valgrind' option, let all the QEMU processes be run under
the Valgrind tool. The Valgrind own parameters may be set with its
environment variable VALGRIND_OPTS, e.g.
$ VALGRIND_OPTS="--leak-check=yes" ./check -valgrind
or they may be listed in the Valgrind checked file ./.valgrindrc or
On Wed, Sep 04, 2019 at 10:06:55AM +0800, Tiwei Bie wrote:
> On Tue, Sep 03, 2019 at 11:04:22PM +0300, Johannes Berg wrote:
> > From: Johannes Berg
> >
> > It doesn't look like this could possibly work properly since
> > VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD is defined to 10, but the
> > dev->proto
As the iotests run longer under the Valgrind, the QEMU_COMM_TIMEOUT is
to be increased in the test cases 028, 183 and 192 when running under
the Valgrind.
Suggested-by: Roman Kagan
Signed-off-by: Andrey Shinkevich
Reviewed-by: Vladimir Sementsov-Ogievskiy
Reviewed-by: John Snow
---
tests/qemu
The Valgrind uses the exported variable TMPDIR and fails if the
directory does not exist. Let us exclude such a test case from
being run under the Valgrind and notify the user of it.
Suggested-by: Kevin Wolf
Signed-off-by: Andrey Shinkevich
Reviewed-by: John Snow
---
tests/qemu-iotests/051 | 4
On Tue, Sep 03, 2019 at 04:37:28PM -0400, Jagannathan Raman wrote:
> qemu_thread_cancel() added to destroy a given running thread.
> This will be needed in the following patches.
I don't see anything in the following patches that actually uses
this new function.
That is good though, because it is
On Tue, Sep 03, 2019 at 04:37:26PM -0400, Jagannathan Raman wrote:
> Started with the presentation in October 2017 made by Marc-Andre (Red Hat)
> and Konrad Wilk (Oracle) [1], and continued by Jag's BoF at KVM Forum 2018,
> the multi-process project is now a prototype and presented in this patchset
The Valgrind tool fails to manage its termination in multi-threaded
processes when they raise the signal SIGKILL. The bug has been reported
to the Valgrind maintainers and was registered as the bug #409141:
https://bugs.kde.org/show_bug.cgi?id=409141
Let's exclude such test cases from running
On Thu, 29 Aug 2019 at 08:12, Gerd Hoffmann wrote:
>
> The following changes since commit 23919ddfd56135cad3cb468a8f54d5a595f024f4:
>
> Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20190827' into
> staging (2019-08-27 15:52:36 +0100)
>
> are available in the Git repository at:
>
On Wed, Sep 04, 2019 at 09:50:21AM +0300, Johannes Berg wrote:
> From: Johannes Berg
>
> This simplifies the various has_feature() checks, we already
> have vu_has_feature() but it checks features, not protocol
> features.
>
> Signed-off-by: Johannes Berg
> ---
> contrib/libvhost-user/libvhost
Am 03.09.2019 um 21:52 hat Peter Lieven geschrieben:
>
>
> > Am 03.09.2019 um 16:56 schrieb Kevin Wolf :
> >
> > Am 03.09.2019 um 15:44 hat Peter Lieven geschrieben:
> >> libnfs recently added support for unmounting. Add support
> >> in Qemu too.
> >>
> >> Signed-off-by: Peter Lieven
> >
> >
On Tue, 3 Sep 2019 19:20:25 +0200
Laszlo Ersek wrote:
> On 09/03/19 16:53, Igor Mammedov wrote:
> > On Mon, 2 Sep 2019 21:09:58 +0200
> > Laszlo Ersek wrote:
> >
> >> On 09/02/19 10:45, Igor Mammedov wrote:
> >>> On Fri, 30 Aug 2019 20:46:14 +0200
> >>> Laszlo Ersek wrote:
> >>>
> >>>
On 21/08/2019 17.53, Daniel P. Berrangé wrote:
> The ordering of events that are emitted during the rmdir
> test have changed with kernel >= 5.3. Semantically both
> new & old orderings are correct, so we must be able to
> cope with either.
>
> To cope with this, when we see an unexpected event, w
On Thu, 29 Aug 2019 at 11:25, Aleksandar Markovic
wrote:
>
> From: Aleksandar Markovic
>
> The following changes since commit 1b142da5f82a8fcdc7783a418592de654d5c6052:
>
> target/mips: Clean up handling of CP0 register 0 (2019-08-29 11:50:18 +0200)
>
> are available in the git repository at:
>
On Tue, Aug 20, 2019 at 06:06:12PM +0200, Laurent Vivier wrote:
> Add a new RNG backend using QEMU builtin getrandom function.
>
> v8: rebase on v4.1
>
> v7: rebase on master
> Make rng-builtin asynchronous with QEMUBH (removed existing R-b)
>
> v6: remove "sysemu/rng-random.h" from virtio-r
On Wed, 21 Aug 2019 at 00:54, Richard Henderson
wrote:
> However, while working on this patch set, I noticed that we have a lot of
> unnecessary overlap between A- and M- profile in the TBFLAGs. Thus point 4
> above and the completely separate rebuild_hflags_m32().
>
> If we rearrange things like
We do this for other semihosting calls so we might as well do it for
M-profile as well.
Signed-off-by: Alex Bennée
Reviewed-by: Richard Henderson
---
v2
- update for change to gen_exception_internal_insn API
---
target/arm/m_helper.c | 18 ++
target/arm/translate.c | 20
Hi Peter,
Here is version 2 of the ARM semi-hosting cleanup patches. The re-base
had failed due to a change in the gen_exception_internal_insn API
which now takes the PC instead of offset from pc_next. There is also
the a minor indentation fix.
Alex Bennée (4):
target/arm: handle M-profile semi
As for the other semihosting calls we can resolve this at translate
time.
Signed-off-by: Alex Bennée
Reviewed-by: Richard Henderson
---
v2
- update for change to gen_exception_internal_insn API
---
target/arm/translate.c | 24
1 file changed, 20 insertions(+), 4 dele
As for the other semihosting calls we can resolve this at translate
time.
Signed-off-by: Alex Bennée
Reviewed-by: Richard Henderson
---
v2
- update for change to gen_exception_internal_insn API
---
target/arm/translate.c | 20 +---
1 file changed, 17 insertions(+), 3 deletion
From: "Emilio G. Cota"
Reviewed-by: Alex Bennée
Signed-off-by: Emilio G. Cota
Reviewed-by: Richard Henderson
Signed-off-by: Alex Bennée
---
accel/tcg/atomic_template.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/accel/tcg/atomic_template.h b/accel/tcg/atomic_template.
Now we do all our checking and use a common EXCP_SEMIHOST for
semihosting operations we can make helper code a lot simpler.
Signed-off-by: Alex Bennée
Reviewed-by: Richard Henderson
---
v2
- fix re-base conflicts
- hoist EXCP_SEMIHOST check
- comment cleanups
v5
- move CONFIG_TCG ifdefs
Philippe Mathieu-Daudé writes:
> This series tries to reduce Travis CI failures due to network
> issues, and tries to speed builds a bit, reducing failures due
> to job timeouting.
Looking good.
Queued to testing/next, thanks.
>
> Travis feature: https://docs.travis-ci.com/user/caching/
>
>
On Wed, 4 Sep 2019 09:56:19 +0100
Shameer Kolothum wrote:
> This is in preparation for adding support for ARM64 platforms
> where it doesn't use port mapped IO for ACPI IO space. We are
> making changes so that MMIO region can be accommodated
> and board can pass the base address into the aml bui
On Mon, 2 Sep 2019 at 11:21, Alex Bennée wrote:
>
> The following changes since commit 23919ddfd56135cad3cb468a8f54d5a595f024f4:
>
> Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20190827' into
> staging (2019-08-27 15:52:36 +0100)
>
> are available in the Git repository at:
>
>
Hi; I've been seeing intermittently on the BSDs this assertion
running test-aio-multithread as part of 'make check':
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
tests/test-aio-multithread -m=quick -k --tap < /dev/null |
./scripts/tap-drive
r.pl --test-name="test-aio-multithrea
From: Julia Suvorova
Using FLR becomes convenient in cases where resetting the bus is
impractical, for example, when debugging the behavior of individual
functions.
Signed-off-by: Julia Suvorova
Message-Id: <20190820163005.1880-1-jus...@redhat.com>
Reviewed-by: Michael S. Tsirkin
Signed-off-by
From: Markus Armbruster
The default backend is only used within virtio_rng_device_realize().
Replace VirtIORNGConf member default_backend by a local variable.
Adjust its type to reduce conversions.
While there, pass &error_abort instead of NULL when failure would be a
programming error.
Signed-
On August 21, 2019 11:19 pm, John Snow wrote:
>
>
> On 8/21/19 10:21 AM, Vladimir Sementsov-Ogievskiy wrote:
>> [CC Nikolay]
>>
>> 21.08.2019 1:25, John Snow wrote:
>>> Hi, downstream here at Red Hat I've been fielding some questions about
>>> the usability and feature readiness of Bitmaps (and
From: Laurent Vivier
Add a new RNG backend using QEMU builtin getrandom function.
It can be created and used with something like:
... -object rng-builtin,id=rng0 -device virtio-rng,rng=rng0 ...
Signed-off-by: Laurent Vivier
Message-Id: <20190820160615.14616-2-lviv...@redhat.com>
---
back
From: Laurent Vivier
Reviewed-by: Markus Armbruster
Signed-off-by: Laurent Vivier
Message-Id: <20190820160615.14616-4-lviv...@redhat.com>
---
backends/rng-builtin.c | 1 -
hw/virtio/virtio-rng.c | 3 +--
include/sysemu/rng.h | 2 ++
qemu-options.hx| 2 +-
4 files changed, 4 insertion
The following changes since commit 379d83f2c92879f4418aa9c57fd1fcbc3c82d384:
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-29-2019'
into staging (2019-09-04 10:16:00 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/
Hi Cleber,
On 09/03/2019 09:52 PM, Cleber Rosa wrote:
The LinuxInitrd.test_with_2gib_file_should_work_with_linux_v4_16 test,
from tests/acceptance/linux_initrd.py, is currently failing to fetch
the "vmlinuz" file. The reason for the failure is that the Fedora
project retires older versions from
On 8/20/19 5:48 AM, Juan Quintela wrote:
> Reviewed-by: Daniel P. Berrangé
> Signed-off-by: Juan Quintela
> ---
> blockdev-nbd.c| 2 +-
> chardev/char-socket.c | 2 +-
> include/io/net-listener.h | 2 ++
> io/net-listener.c | 3 ++-
> migration/socket.c| 2 +-
> q
Also happens to me on a freshly built Qemu master (tip 23919ddfd561).
MBP15,2 OSX 10.14.6
Qemu command line:
qemu/x86_64-softmmu/qemu-system-x86_64 -cpu host -accel hvf -m 4G -smp 8 -vga
std -nographic -vnc :1 -netdev user,id=net0 -device e1000e,netdev=net0
buster.qcow
Guest works fine until I
From: Damien Hedde
Signed-off-by: Damien Hedde
---
This was in the previous reviewed commit. But it can't be in the
clock.c file in order to allow linux-user builds.
---
hw/core/Makefile.objs | 1 +
hw/core/clock-vmstate.c | 25 +
include/hw/clock.h | 9
From: Damien Hedde
This prints the clocks attached to a DeviceState when using "info qtree" monitor
command. For every clock, it displays the direction, the name and if the
clock is forwarded. For input clock, it displays also the frequency.
This is based on the original work of Frederic Konrad.
On 9/4/19 3:18 AM, Daniel P. Berrangé wrote:
> -Syntax for specifying a NBD device using TCP
> +Syntax for specifying a NBD device using TCP, in preferred URI form:
> +``nbd://[:]/[]''
> +
> ``nbd::[:exportname=]''
>
>
> In general libvirt should never use the psuedo-UR
From: Damien Hedde
Add the connection between the slcr's output clocks and the uarts inputs.
Also add the main board clock 'ps_clk', which is hard-coded to 33.33MHz
(the default frequency). This clock is used to feed the slcr's input
clock.
Signed-off-by: Damien Hedde
---
hw/arm/xilinx_zynq.c
From: Damien Hedde
Introduce a function and macro helpers to setup several clocks
in a device from a static array description.
An element of the array describes the clock (name and direction) as
well as the related callback and an optional offset to store the
created object pointer in the device
From: Damien Hedde
Switch the cadence uart to multi-phase reset and add the
reference clock input.
The input clock frequency is added to the migration structure.
The reference clock controls the baudrate generation. If it disabled,
any input characters and events are ignored.
If this clock rem
This series aims to add a way to model clock distribution in qemu. This allows
to model the clock tree of a platform allowing us to inspect clock
configuration and detect problems such as disabled clock or bad configured
pll.
The added clock api is very similar the the gpio api for devices. We can
From: Damien Hedde
Switch the slcr to multi-phase reset and add some clocks:
+ the main input clock (ps_clk)
+ the reference clock outputs for each uart (uart0 & 1)
The clock frequencies are computed using the internal pll & uart configuration
registers and the ps_clk frequency.
Signed-off-by:
This prints the clocks attached to a DeviceState when using "info qtree" monitor
command. For every clock, it displays the direction, the name and if the
clock is forwarded. For input clock, it displays also the frequency.
This is based on the original work of Frederic Konrad.
Signed-off-by: Dami
From: Damien Hedde
This series aims to add a way to model clock distribution in qemu. This allows
to model the clock tree of a platform allowing us to inspect clock
configuration and detect problems such as disabled clock or bad configured
pll.
The added clock api is very similar the the gpio ap
From: Damien Hedde
Introduce clock objects: ClockIn and ClockOut.
These objects may be used to distribute clocks from an object to several
other objects. Each ClockIn object contains the current state of the
clock: the frequency; it allows an object to migrate its input clock state
independently
From: Damien Hedde
Add the documentation about the clock inputs and outputs in devices.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde
---
docs/devel/clock.txt | 246 +++
1 file changed, 246 insertions(+)
create mode
From: Damien Hedde
Add functions to easily add input or output clocks to a device.
A clock objects is added as a child of the device.
The api is very similar the gpio's one.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde
---
I've removed the reviewed-by/tes
Add the connection between the slcr's output clocks and the uarts inputs.
Also add the main board clock 'ps_clk', which is hard-coded to 33.33MHz
(the default frequency). This clock is used to feed the slcr's input
clock.
Signed-off-by: Damien Hedde
---
hw/arm/xilinx_zynq.c | 64 +++
Introduce clock objects: ClockIn and ClockOut.
These objects may be used to distribute clocks from an object to several
other objects. Each ClockIn object contains the current state of the
clock: the frequency; it allows an object to migrate its input clock state
independently of other objects.
A
Switch the cadence uart to multi-phase reset and add the
reference clock input.
The input clock frequency is added to the migration structure.
The reference clock controls the baudrate generation. If it disabled,
any input characters and events are ignored.
If this clock remains unconnected, the
Signed-off-by: Damien Hedde
---
This was in the previous reviewed commit. But it can't be in the
clock.c file in order to allow linux-user builds.
---
hw/core/Makefile.objs | 1 +
hw/core/clock-vmstate.c | 25 +
include/hw/clock.h | 9 +
3 files changed, 3
On Tue, 3 Sep 2019 at 14:35, Max Reitz wrote:
>
> The following changes since commit 54b89db5309d5fa8b5d3fe5fe56f81704e2f9706:
>
> Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request'
> into staging (2019-09-03 09:43:26 +0100)
>
> are available in the Git repository at:
>
>
From: Aleksandar Rikalo
Add support for semtimedop() emulation. It is based on invocation
of safe_semtimedop().
Conversion is left out of safe_semtimedop(), since other safe_xxx()
usually don't contain similar conversions.
Signed-off-by: Aleksandar Rikalo
Signed-off-by: Aleksandar Markovic
--
Switch the slcr to multi-phase reset and add some clocks:
+ the main input clock (ps_clk)
+ the reference clock outputs for each uart (uart0 & 1)
The clock frequencies are computed using the internal pll & uart configuration
registers and the ps_clk frequency.
Signed-off-by: Damien Hedde
---
hw
Add the documentation about the clock inputs and outputs in devices.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde
---
docs/devel/clock.txt | 246 +++
1 file changed, 246 insertions(+)
create mode 100644 docs/devel/cl
From: Yunqiang Su
FDFLUSH is used for flushing buffers of floppy drives. Support in
QEMU is needed because some of Debian packages use this ioctl while
running post-build tests. One such example is 'tar' package.
Signed-off-by: Yunqiang Su
Signed-off-by: Aleksandar Markovic
Reviewed-by: Lauren
Introduce a function and macro helpers to setup several clocks
in a device from a static array description.
An element of the array describes the clock (name and direction) as
well as the related callback and an optional offset to store the
created object pointer in the device state structure.
Th
Library functions should not rely on functions that require global_qtest
(since they might get used in tests that deal with multiple states).
Commit 1999a70a05ad603d ("Make generic virtio code independent from
global_qtest") already tried to clean the libqos virtio code, but I
missed to replace the
From: Aleksandar Markovic
FDRESET, FDRAWCMD, FDTWADDLE, and FDEJECT ioctls are misc commands
for controlling a floppy drive.
Signed-off-by: Aleksandar Markovic
---
linux-user/ioctls.h | 4
linux-user/syscall_defs.h | 4
2 files changed, 8 insertions(+)
diff --git a/linux-user/
On Dienstag, 3. September 2019 21:38:15 CEST Eric Blake wrote:
> On 9/2/19 5:29 PM, Christian Schoenebeck via Qemu-devel wrote:
> > === OUTPUT BEGIN ===
> > 1/4 Checking commit bb69de63f788 (9p: Treat multiple devices on one
> > export
> > as an error) ERROR: Author email address is
1 - 100 of 341 matches
Mail list logo
