On 30.04.2010, at 14:48, 乔崇 wrote:
> Hi,everyone!
> I just add AHCI Emulation into qemu.
> I have tested it on linux kernel,it works well.
> run like this:
> qemu -hda disk ...
>
> Now only support sata disk.
Hi Chong,
While I haven't compiled and tried it out myself, it's amazing to see some
On 27.04.2010, at 17:31, Thomas Monjalon wrote:
> From: Thomas Monjalon
>
> Since commit 2ada0ed, "Return From Interrupt" is broken for PPC processors
> because the upper bits (POW, TGPR, ILE) of MSR were not cleared.
May I ask for your test case or how you stumbled over this? I haven't seen a
In oneshot mode, the delta needs to come from the TimerLoad register,
not the maximum limit.
Signed-off-by: Rabin Vincent
---
hw/arm_timer.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/hw/arm_timer.c b/hw/arm_timer.c
index 5b6947a..9073ffc 100644
--- a/hw/arm_timer.
Reload the timer when TimerControl is written, if the timer is to be
enabled. Otherwise, if an earlier write to TimerLoad was done while
periodic mode was not set, s->delta may incorrectly still have the value
of the maximum limit instead of the value written to TimerLoad.
This problem is evident
On Sat, May 01, 2010 at 10:38:51PM -0400, Kevin O'Connor wrote:
> Date: Sat, 1 May 2010 22:38:51 -0400
> From: Kevin O'Connor
> To: qemu-devel@nongnu.org, seab...@seabios.org
> Cc:
> Subject: [Qemu-devel] [PATCH] Fix qemu mouse Set_Protocol behavior
>
> The QEMU USB mouse claims to support the "
Hi,Alexander Graf.
I am very glad you noticed my patch about ahci.I love qemu just like
I love linux.I wish I could do much more work on qemu development.
I had cloned qemu from master branch,add my patch into it,and tested
ahci on i386 softmmu.
If anyone is interested on ahci,you can te
Your code can change MSR[IP]; there is also a strapping pin that is
sampled on HRESET (and copied to MSR[IP]).
Wouldn't this mean that when the reset is issued by hardware, MSR[IP]
is always 1 (to boot from ROM) but with software reset it can take
software defined values?
Yes, that is what i
Hi
I'm trying to run kvm/qemu on a linux host built from scratch ie., no x
windows, no window manager etc. bare minimum libraries etc. when i try to spawn
a VM with "-curses", I see "VGA Blank Mode" and nothing else. i'm attached to
serial console for this host. what could be the issue?
thanks
Hi,
乔崇 wrote:
Hi,Alexander Graf.
I am very glad you noticed my patch about ahci.I love qemu just like I love linux.I wish I could do much more work on
qemu development.
I had cloned qemu from master branch,add my patch into it,and tested ahci on
i386 softmmu.
If anyone is interested on a
On 05/02/2010 06:36 PM, Sebastian Herbszt wrote:
./configure --target-list=i386-softmmu
make
dd if=/dev/zero of=/tmp/disk bs=1M count=100
./i386-softmmu/qemu -cdrom KNOPPIX_V6.0.1CD-2009-02-08-EN.iso -boot
d -drive if=sd,file=/tmp/disk
After linux boot,you will find a ahci device named sda
Hi all,
I am the GSoC student working on the project. I haven't tried the patch
yet, but I've read the code. It could use general cleanup and a lot of
development indeed, but otherwise it looks like a good base to build
complete support on so far. I'm going to try the patch in practice as
soon as
On Sun, May 02, 2010 at 02:04:44PM +0300, Shahar Havivi wrote:
> On Sat, May 01, 2010 at 10:38:51PM -0400, Kevin O'Connor wrote:
> > The QEMU USB mouse claims to support the "boot" protocol
> > (bInterfaceSubClass is 1). However, the mouse rejects the
> > Set_Protocol command.
> >
> > The qemu mo
Hi Kevin
On Mon, Mar 29, 2010 at 7:44 PM, Kevin Wolf wrote:
> Am 28.03.2010 19:07, schrieb Ryota Ozaki:
>> Follow "Every indented statement is braced; even if the block
>> contains just one statement." described in CODING_STYLE.
>>
>> Signed-off-by: Ryota Ozaki
>
> Usually we fix the coding styl
On Mon, Mar 29, 2010 at 7:54 PM, Kevin Wolf wrote:
> Am 28.03.2010 19:07, schrieb Ryota Ozaki:
>> This patch allows to operate on nbd device file
>> without write permission for the file if read-only
>> option is specified.
>>
>> Signed-off-by: Ryota Ozaki
>
> The help for -r should be changed, t
On Mon, Mar 29, 2010 at 8:03 PM, Kevin Wolf wrote:
> Am 28.03.2010 19:07, schrieb Ryota Ozaki:
>> - use err(3) instead of errx(3) if errno is available
>> to report why failed
>> - let fail prior to daemon(3) if opening a nbd file
>> is likely to fail after daemonizing to avoid silent
>> fai
- use err(3) instead of errx(3) if errno is available
to report why failed
- let fail prior to daemon(3) if opening a nbd file
is likely to fail after daemonizing to avoid silent
failure exit
- add missing 'ret = 1' when unix_socket_outgoing failed
Signed-off-by: Ryota Ozaki
---
qemu-nbd.c
Hi again,
please consider the following minor changes:
- debug output with DEBUG_AHCI
- set port count to 4
- change return value of PxSSTS to include SPD and IPM
- change cap and version default values according to Intel #301473-002
Regards,
Sebastian
--- hw/ahci.c.orig Sun May 2 15:43:58 201
I tested this patch as follows:
I put printf()s into involved functions. Then ran qemu on a terminal
emulator, and resized it.
The guest kernel gets initial size, and follows host resize. Both
singleport and multiport work.
v3:
If multiport is enabled, send the control message. If not, send a con
From: Kusanagi Kouichi
Signed-off-by: Kusanagi Kouichi
Signed-off-by: Amit Shah
---
qemu-char.c | 34 ++
qemu-char.h |3 +++
2 files changed, 37 insertions(+), 0 deletions(-)
diff --git a/qemu-char.c b/qemu-char.c
index ac65a1c..ce24483 100644
--- a/qemu-
From: Kusanagi Kouichi
I tested this patch as follows: I put printf()s into involved
functions. Then ran qemu on a terminal emulator, and resized it. The
guest kernel gets initial size, and follows host resize. Both singleport
and multiport work.
Signed-off-by: Kusanagi Kouichi
Signed-off-by: A
On (Mon) May 03 2010 [13:58:13], Kusanagi Kouichi wrote:
> I tested this patch as follows:
> I put printf()s into involved functions. Then ran qemu on a terminal
> emulator, and resized it.
> The guest kernel gets initial size, and follows host resize. Both
> singleport and multiport work.
>
> v3:
21 matches
Mail list logo