Ok no problem. My sloppiness. After all, my implementation wasn't
portable. So, let's fix it. After a while, discovered there's the
os.sep. Ok, replace "/" to os.sep, done. Then, bang, all hell
went lose. Because, the backslash is used as escape in string, so any
regex that manipulate path got fuc
On 4/9/2012 1:52 AM, Chris Angelico wrote:
> I think this will be a real winner, and you
> should team up with Ranting Rick to produce a new operating system and
> Python with this new specification and RULE THE WORLD!
But only after going back to the cage to plan for tomorrow night.
--
CPython 3
罗勇刚(Yonggang Luo) , 09.04.2012 04:28:
> static PyObject *
> Repository_get_index(Repository *self, void *closure)
> {
> int err;
> git_index *index;
> Index *py_index;
>
> assert(self->repo);
>
> if (self->index == NULL) {
> err = git_repository_index(&index, self->rep
On Mon, Apr 9, 2012 at 3:29 AM, Dave Angel wrote:
> I don't know about pygame, but almost everywhere in the standard
> library, ranges are closed at the begin and open at the end. For
> example, if you have range(30, 50), there are 20 items, numbered 30
> through 49. I expect the same will be tr
Hello!
I have this problem with my script exiting randomly with Linux OS
status code -9 (most often) or -15 (also sometimes, but much more
rarely). As far as I understand -9 corresponds to Bad file descriptor
and -15 Block device required.
1) Is there a way how I could find out what exactly cause
On 4/9/2012 5:01 AM, Janis wrote:
> I have this problem with my script exiting randomly with Linux OS
> status code -9 (most often) or -15 (also sometimes, but much more
> rarely). As far as I understand -9 corresponds to Bad file descriptor
> and -15 Block device required.
>
> 1) Is there a way h
Janis writes:
> I have this problem with my script exiting randomly with Linux OS
> status code -9 (most often) or -15 (also sometimes, but much more
> rarely). As far as I understand -9 corresponds to Bad file descriptor
> and -15 Block device required.
How do you get -9 and -15? Exit status is
I means remove the circular references without hurt the code, that is,
these two object will be destroyed at the same time. Even there
creation time is differ
2012/4/9, Stefan Behnel :
> 罗勇刚(Yonggang Luo) , 09.04.2012 04:28:
>> static PyObject *
>> Repository_get_index(Repository *self, void *clos
On 2012-04-07, Jon Clements wrote:
> Any reason you can't derive from int instead of object? You may
> also want to check out functions.total_ordering on 2.7+
functools.total_ordering
I was temporarily tripped up by the aforementioned documentation,
myself.
--
Neil Cerutti
--
http://mail.pyth
Is it a known fact that ast.parse doesn't handle line continuations and
some multi-line expressions?
For instance, he doesn't like
for (x,
y) in each([1,
2]):
print(1)
at all.
Is there a workaround besides "repairing" the code on the fly?
Kiuhnm
--
http:
On Mon, Apr 9, 2012 at 4:53 AM, Kiuhnm
wrote:
> Is it a known fact that ast.parse doesn't handle line continuations and some
> multi-line expressions?
> For instance, he doesn't like
> for (x,
> y) in each([1,
> 2]):
> print(1)
> at all.
> Is there a workaroun
On Sun, 2012-04-08 at 20:09 +0200, Franck Ditter wrote:
> How may I get a fresh Python shell with Idle 3.2 ?
> I have to run the same modules several times with all
> variables cleared.
Why don't you write your module as a script and pass the variables via
command line like most human beings?
--
On 2012-04-08, John Nagle wrote:
> 6. Multiple inheritance is a mess. Especially "super".
Python allows you to get dirty. Super solves a messy problem.
> 10. Python 3 isn't upward compatible with Python 2.
Even minor versions of Python are usually not forward compatible.
In the case of 2 to 3
In <20120408114313...@kylheku.com>, on 04/08/2012
at 07:14 PM, Kaz Kylheku said:
>Null-terminated strings are infinitely better than the ridiculous
>encapsulation of length + data.
ROTF,LMAO!
>For one thing, if s is a non-empty null terminated string then,
>cdr(s) is also a string representi
On 9-4-2012 13:53, Kiuhnm wrote:
> Is it a known fact that ast.parse doesn't handle line continuations and some
> multi-line
> expressions?
> For instance, he doesn't like
> for (x,
> y) in each([1,
> 2]):
> print(1)
> at all.
> Is there a workaround besid
In article <4f82d3e2$1$fuzhry+tra$mr2...@news.patriot.net>,
Shmuel (Seymour J.) Metz wrote:
> >Null terminated strings have simplified all kids of text
> >manipulation, lexical scanning, and data storage/communication
> >code resulting in immeasurable savings over the years.
>
> Yeah, especial
On 4/9/2012 3:47 AM Alain Ketterlin said...
Janis writes:
I have this problem with my script exiting randomly with Linux OS
status code -9 (most often) or -15 (also sometimes, but much more
rarely).
My guess is that your script hits a limit, e.g., number of open files,
or stack-size, or...
On Apr 9, 6:47 am, Alain Ketterlin
wrote:
> Janis writes:
> > I have this problem with my script exiting randomly with Linux OS
> > status code -9 (most often) or -15 (also sometimes, but much more
> > rarely). As far as I understand -9 corresponds to Bad file descriptor
> > and -15 Block device
On Apr 9, 6:01 am, Janis wrote:
> Hello!
>
> I have this problem with my script exiting randomly with Linux OS
> status code -9 (most often) or -15 (also sometimes, but much more
> rarely). As far as I understand -9 corresponds to Bad file descriptor
> and -15 Block device required.
>
As Alain al
On 4/9/2012 14:43, Irmen de Jong wrote:
On 9-4-2012 13:53, Kiuhnm wrote:
Is it a known fact that ast.parse doesn't handle line continuations and some
multi-line
expressions?
For instance, he doesn't like
for (x,
y) in each([1,
2]):
print(1)
at all.
> How may I get a fresh Python shell with Idle 3.2 ?
Open the configuration panel (Options -> Configure IDLE). Look in the "Keys"
tab for the shortcut to "restart-shell"
HTH
--
Miki Tebeka
http://pythonwise.blogspot.com
--
http://mail.python.org/mailman/listinfo/python-list
On Apr 8, 8:09 pm, Adam Skutt wrote:
> On Apr 8, 5:52 pm, superhac...@gmail.com wrote:
>
>
>
>
>
>
>
>
>
> > On Sunday, April 8, 2012 3:55:41 PM UTC-5, Adam Skutt wrote:
> > > On Apr 8, 2:45 pm, "superhac...@gmail.com"
> > > wrote:
> > > > I am using the python module nfqueue-bindings which is a
On Sun, 8 Apr 2012 16:58:01 -0700 (PDT), Scott Siegler wrote:
[snip]
> I set rect.left to 30, rect.top to 30 and rect.width = 20
>
> This works fine. However, when looking at rect.right() it
> shows that it is equal to 50. I suppose this is equal to
> 30+20. However, since the first pixel is on l
On Monday, 9 April 2012 12:33:25 UTC+1, Neil Cerutti wrote:
> On 2012-04-07, Jon Clements wrote:
> > Any reason you can't derive from int instead of object? You may
> > also want to check out functions.total_ordering on 2.7+
>
> functools.total_ordering
>
> I was temporarily tripped up by the a
On 2012-04-09, Shmuel Metz wrote:
> In <20120408114313...@kylheku.com>, on 04/08/2012
>at 07:14 PM, Kaz Kylheku said:
>
>>Null-terminated strings are infinitely better than the ridiculous
>>encapsulation of length + data.
>
> ROTF,LMAO!
>
>>For one thing, if s is a non-empty null terminated s
On 2012-04-09, Roy Smith wrote:
> In article <4f82d3e2$1$fuzhry+tra$mr2...@news.patriot.net>,
> Shmuel (Seymour J.) Metz wrote:
>
>> >Null terminated strings have simplified all kids of text
>> >manipulation, lexical scanning, and data storage/communication
>> >code resulting in immeasurable sa
Thank you all for the help! I will need to think a bit about the other
suggestions.
But, Alan, as to this:
> > How do you get -9 and -15? Exit status is supposed to be between 0 and
> > 127.
I have the following code that has caught these:
p = subprocess.Popen([Config.PYTHON_EXE,'Load.py',"%s"
On 4/9/2012 8:09 AM, Albert W. Hopkins wrote:
On Sun, 2012-04-08 at 20:09 +0200, Franck Ditter wrote:
How may I get a fresh Python shell with Idle 3.2 ?
I have to run the same modules several times with all
variables cleared.
If you have the module in an idle edit window, F5-run restarts after
THE QUR'AN AND MODERN SCIENCE
Extracted from the Book
The Bible, The Qur'an and Science
Maurice Bucaille
ASTRONOMY IN THE QUR'AN
The Qur'an is full of reflections on the heavens. In the preceding
chapter on the Creation, we saw how the plurality of the heavens and
ear
I'm trying out the pygame tutorial at
http://www.pygame.org/docs/tut/intro/intro.html
If I try out the code I'm facing an error:
./game.py: line 4: syntax error at unexpected symbol 'size'
./game.py: line 4: `size = width, height = 320, 240'
can anyone here tell me what's going wrong?
thanks
--
Shmuel (Seymour J.) Metz writes:
[...]
>>For one thing, if s is a non-empty null terminated string then,
>>cdr(s) is also a string representing the rest of that string
>>without the first character,
>
> Are you really too clueless to differentiate between C and LISP?
In LISP, a list is a set o
On 4/9/2012 2:57 PM, Kiuhnm wrote:
Do you have some real or realistic (but easy and self-contained)
examples when you had to define a (multi-statement) function and pass it
to another function?
This is so common in Python that it is hardly worth sneezing about.
map(f, iterable)
filter(f, itera
On 09/04/2012 21:20, aapeetnootjes wrote:
I'm trying out the pygame tutorial at
http://www.pygame.org/docs/tut/intro/intro.html
If I try out the code I'm facing an error:
./game.py: line 4: syntax error at unexpected symbol 'size'
./game.py: line 4: `size = width, height = 320, 240'
can anyone
Rainer Weikusat writes:
> Shmuel (Seymour J.) Metz writes:
>
> [...]
>
>>>For one thing, if s is a non-empty null terminated string then,
>>>cdr(s) is also a string representing the rest of that string
>>>without the first character,
>>
>> Are you really too clueless to differentiate between C a
Hi Miki,
On 2012-04-05 00:34, Miki Tebeka wrote:
> I'm going to give a "Python Gotcha's" talk at work.
> If you have an interesting/common "Gotcha" (warts/dark corners ...) please
> share.
>
> (Note that I want over http://wiki.python.org/moin/PythonWarts already).
I gave a somewhat similar tal
In article
<1a558398-3984-4b20-8d67-a0807871b...@v1g2000yqm.googlegroups.com>,
aapeetnootjes wrote:
> I'm trying out the pygame tutorial at
> http://www.pygame.org/docs/tut/intro/intro.html
> If I try out the code I'm facing an error:
> ./game.py: line 4: syntax error at unexpected symbol 'si
On 4/9/2012 11:57 AM Kiuhnm said...
Do you have some real or realistic
... yes
(but easy and self-contained)
aah, no.
examples when you had to define a (multi-statement) function and pass it
to another function?
This weekend I added functionality to a subsystem that allows users to
On 09/04/2012 11:01, Janis wrote:
My experience is that these kind of behaviors are observed when (from
most to least likeliness):
- Your kernel barfs on a limit, e.g. space/inodes/processes/memory/etc.
- You have a linked library mismatch
- You have bit rot on your system
- You have a faulty l
You might try running your Python process with:
strace -f -s 1024 -o /tmp/script.strace python /path/to/script.py
Then you (perhaps with a C programmer) can likely track down what happened
right before the crash by examining the system call tracer near the end of
the file.
http://stromberg.dns
On 09Apr2012 12:02, Janis wrote:
| Thank you all for the help! I will need to think a bit about the other
| suggestions.
|
| But, Alan, as to this:
| > > How do you get -9 and -15? Exit status is supposed to be between 0 and
| > > 127.
|
| I have the following code that has caught these:
|
| p
On Monday, April 9, 2012 9:39:54 AM UTC-5, super...@gmail.com wrote:
> On Apr 8, 8:09 pm, Adam Skutt wrote:
> > On Apr 8, 5:52 pm, superhac...@gmail.com wrote:
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > > On Sunday, April 8, 2012 3:55:41 PM UTC-5, Adam Skutt wrote:
> > > > On Apr 8, 2:45 pm, "superha
Shot in the dark here: has any who reads this group been successful
with getting Python to programmatically post an image to Facebook?
I've tried using fbconsole[1] and facepy[2], both of which apparently
work fine for their authors and others and although I have an
authorization code, publish pe
> I've tried using fbconsole[1] and facepy[2], both of which apparently
Forgot the refs:
[1]https://github.com/facebook/fbconsole;
http://blog.carduner.net/2011/09/06/easy-facebook-scripting-in-python/
[2]https://github.com/jgorset/facepy
--
http://mail.python.org/mailman/listinfo/python-list
I wrote something like this a little while ago, may be this is what you are
looking for:
http://rationalpie.wordpress.com/2011/02/12/posting-photo-to-wall-using-facebook-graph-api/
On Mon, Apr 9, 2012 at 8:46 PM, CM wrote:
> > I've tried using fbconsole[1] and facepy[2], both of which apparently
On Mon, Apr 9, 2012 at 10:49 PM, Nikhil Verma wrote:
>
> for_patient_type = {37: u'Test', 79: u'Real', 80: u'Real', 81: u'Real',
> 83: u'Real', 84: u'Real', 91: u'Real', 93: u'Real'}
>
> I want if the values are 'Real' give me the keys that have values 'Real'
> like this.
>
> {79:'Real'}
> {80:'Re
Thanks Shashank . It worked.
On Tue, Apr 10, 2012 at 11:34 AM, Shashank Singh <
shashank.sunny.si...@gmail.com> wrote:
>
>
> On Mon, Apr 9, 2012 at 10:49 PM, Nikhil Verma wrote:
>
>>
>> for_patient_type = {37: u'Test', 79: u'Real', 80: u'Real', 81: u'Real',
>> 83: u'Real', 84: u'Real', 91: u'Real
46 matches
Mail list logo
