Hi
You should use npgsql.dll to play with pgsql.which stores in postgresql
install folder.please check or let me your are getting any problem with
that.
Thanks,
Venkat
From: pgsql-general-ow...@postgresql.org
[mailto:pgsql-general-ow...@postgresql.org] On Behalf Of Vikram Patil
Se
On Wed, May 20, 2009 at 9:01 PM, Merlin Moncure wrote:
> On Wed, May 20, 2009 at 3:11 PM, Gerhard Wiesinger
> wrote:
>> Hello!
>>
>> Is HOT in 8.3 used in the following scenario:
>> INSERT ...
>> DELETE ...
>> at the same ratio.
>>
>> So for example current data is added every minute and all old
On Wed, 2009-05-20 at 16:01 -0400, Merlin Moncure wrote:
> On Wed, May 20, 2009 at 3:11 PM, Gerhard Wiesinger
> wrote:
> > Hello!
> >
> > Is HOT in 8.3 used in the following scenario:
> > INSERT ...
> > DELETE ...
> > at the same ratio.
> >
> > So for example current data is added every minute a
Hi,
I have compiled 8.3.7 on HP-Itanium
After the build I have continued to the tests (gmake check)
One of the tests failed (division by zero error test)
The regression.diffs file shows the diff regarding of the expected result and
the actual result:
*** ./expected/errors.out Sat Nov 10 1
Are there any plans to support this kind of scenario?
Ciao,
Gerhard
--
http://www.wiesinger.com/
On Wed, 20 May 2009, Merlin Moncure wrote:
On Wed, May 20, 2009 at 3:11 PM, Gerhard Wiesinger wrote:
Hello!
Is HOT in 8.3 used in the following scenario:
INSERT ...
DELETE ...
at the same ra
Hi,
I have compiled 8.3.7 on HP-Itanium
After the build I have continued to the tests (gmake check)
One of the tests failed (division by zero error test)
The regression.diffs file shows the diff regarding of the expected result and
the actual result:
*** ./expected/errors.out Sat Nov 10 16
On 21/05/2009 07:39, Kent Tong wrote:
> I know that it is impossible to change the locale. But can I pg_dump all the
> databases, run initdb again using the desired locale, and then pg_restore?
Absolutely - this is no different from an upgrade scenario.
Ray.
---
Hi,
We are facing a problem in setting up a database backup for our production
server using pg-standby.
We are using Postgres 8.3.5 in our production environment. We have an active
user-base of 2 million and need to support 5000 TPS. The service needs to be
up and running 24x7. The production dat
Question here,
on 8.1, is vacuum analyze actually updating fsm too ?
--
GJ
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-general
Thanks Andy,
That was exactly what I needed! Now I just have to deal with this huge
matrix I've generated ;-)
Cheers,
Carson
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-general
On May 20, 2009, at 7:17 PM, James B. Byrne wrote:
Looking at this I have to wonder what will be the effect of having
tens of thousands of rate-pairs on file. Would this query be
improved by first doing a sub-query on base/quote pairs that
returned DISTINCT pairs and then do the IN condition usi
The data isn't really historical, but some data have to be for e.g. some
regulations after a period of time. But all the available data should be
available for e.g. reporting. So partitioning doesn't make any sense
in this case, right?
Ciao,
Gerhard
--
http://www.wiesinger.com/
On Thu, 21 M
On Wed, May 20, 2009 at 8:50 AM, Ivan Sergio Borgonovo
wrote:
> On Wed, 20 May 2009 07:46:02 -0400
> Dave Page wrote:
>
>> > Beside the fact I can only thank for all the great work around
>> > postgresql, is there a reason we can't have something similar on
>> > eg. Debian that will let us have a
On 2009-05-20, Chen, Dongdong (GE Healthcare) wrote:
> This is a multi-part message in MIME format.
>
> In my application, when press button "Backup" in UI, it invokes pg_dump
> to backup the database. It may take few minutes for the whole process.
> If I want to pause the process, what should I d
On 2009-05-20, Sam Mason wrote:
> On Wed, May 20, 2009 at 03:39:39PM +0100, Howard Cole wrote:
>> Sam Mason wrote:
>> >Note that when used on the pg_dump process all you're doing is stopping
>> >it from writing out the backup. The server process will still be
>> >running and waiting for the backu
On 2009-05-20, Timmy wrote:
> Hi,
>I have stored a compressed string in a table field.
> The compressed string is created by zlib using python.
> I want to decompress this string by zlib under plpy but plpy fails to do so.
> Is plpy not support decompression? Why?
are you storing it in a byt
On 2009-05-20, Vick Khera wrote:
> Does psql silently reconnect to the DB?
I have noticed that behaviour recently.
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-general
On 2009-05-20, Gilles wrote:
> At 10:58 20/05/2009, Craig Ringer wrote:
>>I suspect a lot of that comes down to user/admin knowledge as much
>>as anything. [...] That said, there are also a few bugs lurking that
>>only affect the Windows version. [...] I've used Pg on my laptop at
>>various poi
On Wednesday 20 May 2009 11:36:38 pm Moshe Ben-Shoham wrote:
> Hi,
>
>
>
> We're working with version 8.3.5-1.
>
>
>
> Lately we started seeing insert statements hang in the DB. The
> statements come from two different clients.
>
>
>
> When it happens, I see the following messages in the log every
On Thu, May 21, 2009 06:02, Alban Hertroys wrote:
>
> But as people often say here, premature optimisation is a waste of
> time, so don't go that route unless you have a reason to expect
> problems in that area.
>
That was my very thought when I sent that message. On the other
hand, in case I w
In response to "Moshe Ben-Shoham" :
>
> We're working with version 8.3.5-1.
>
> Lately we started seeing insert statements hang in the DB. The
> statements come from two different clients.
>
> When it happens, I see the following messages in the log every second or
> so:
>
> 2009-05-21 08:56:49
=?UTF-8?Q?Grzegorz_Ja=C5=9Bkiewicz?= writes:
> on 8.1, is vacuum analyze actually updating fsm too ?
Yup.
regards, tom lane
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgs
2009/5/21 Tom Lane :
> =?UTF-8?Q?Grzegorz_Ja=C5=9Bkiewicz?= writes:
>> on 8.1, is vacuum analyze actually updating fsm too ?
>
> Yup.
Thanks, also to make sure that I got it. Whatever's in FSM, will be
actually reused by postgreqsl during normal operation, instead of
creating new files to store t
"Sofer, Yuval" writes:
> I have compiled 8.3.7 on HP-Itanium
> After the build I have continued to the tests (gmake check)
> One of the tests failed (division by zero error test)
Hm, what compiler and what optimization level? We have seen a report
or two about this before, all from people using
We have a private machine that runs postgresql and have created a
database. We want to access that database from the web for plotting
using php. The web server and pages are on a public (different) machine
that does not have postgresql. Nor will they install it for is. The
postgresql database i
> So, the question is, can someone go through these (public) web pages and
> access the postgresql database if the postgresql server is running on
> the private machine?
>
> We have other data in the postgresql and would like to only have to use
> one database types, i.e., postgresql.
If you
Just looking for postgres "best practices" input from the veterans:
If the primary key of the customer table is cust_short_name and my DB
reflects also customer departments, I can link a customer to its
departments one of three ways:
1. The department table has a cust_short_name column and ma
On Thu, May 21, 2009 at 12:35 PM, Kenneth Tilton wrote:
> If the primary key of the customer table is cust_short_name and my DB
> reflects also customer departments, I can link a customer to its departments
> one of three ways:
>
> 1. The department table has a cust_short_name column and makes tha
I wouldn't trust OIDs, because they are 32bits for once.
Secondly, Watch for index size. That's the main reason why (big)int as
a key reference is a win over other types - at least in my general
practice.
And third advice, try different approaches, and queries - to figureout
what would suit the so
Joshua,
Let me rephrase what I wrote. The database is on a public machine
(Linux), but the postgresql postmaster runs on a private machine
(Solaris 10). Can we access the postgresql database through the public
machine, even though the postmaster is running from a (different)
private machine?
On Thu, 2009-05-21 at 13:49 -0400, Keith D. Evans wrote:
> Joshua,
>
> Let me rephrase what I wrote. The database is on a public machine
> (Linux), but the postgresql postmaster runs on a private machine
> (Solaris 10). Can we access the postgresql database through the public
> machine, even t
Merlin Moncure wrote:
On Thu, May 21, 2009 at 12:35 PM, Kenneth Tilton wrote:
If the primary key of the customer table is cust_short_name and my DB
reflects also customer departments, I can link a customer to its departments
one of three ways:
1. The department table has a cust_short_name co
On 21/05/2009 18:49, Keith D. Evans wrote:
> The database is on a public machine (Linux), but the postgresql
> postmaster runs on a private machine (Solaris 10).
That doesn't make a lot of sense, unless you've got *two* postmasters
running, one on each machine, or maybe you've created a tablespac
We usually run postgresql on a private machine (gravity) but due to
space, we have moved the database to a different machine through afs (a
local network at the university). We do not want the private machine to
be accessible to outside users, so our web pages are on the university's
public web
In your application, the connection string should have the ip address of the
postgres server. The postgres server (solaris box) should allow port 5432
through the firewall.
If you cannot access port 5432 on your solaris box from the linux box,
then make sure that you don't have a firewall in th
On Thu, May 21, 2009 at 12:23 PM, Keith D. Evans wrote:
> We usually run postgresql on a private machine (gravity) but due to space,
> we have moved the database to a different machine through afs (a local
Wait, the whole database, including a postmaster running on the other
machine? Or just tha
On Thu, May 21, 2009 at 1:04 PM, Scott Marlowe wrote:
> On Thu, May 21, 2009 at 12:23 PM, Keith D. Evans wrote:
>> We usually run postgresql on a private machine (gravity) but due to space,
>> we have moved the database to a different machine through afs (a local
>
> Wait, the whole database, inc
I have a postgresql database that I'm using for logging of data.
There's basically one table where each row is a line from my log files.
It's getting to a size where it's running very slow though. There are
about 10 million log lines per day and I keep 30 days of data in it.
All the columns I
On Thu, May 21, 2009 at 3:13 PM, Alex Thurlow wrote:
> I have a postgresql database that I'm using for logging of data. There's
> basically one table where each row is a line from my log files. It's
> getting to a size where it's running very slow though. There are about 10
> million log lines p
I have a postgresql database that I'm using for logging of data.
There's basically one table where each row is a line from my log files.
It's getting to a size where it's running very slow though. There are
about 10 million log lines per day and I keep 30 days of data in it.
All the columns
On Thu, May 21, 2009 at 1:13 PM, Alex Thurlow wrote:
> I have a postgresql database that I'm using for logging of data. There's
> basically one table where each row is a line from my log files. It's
> getting to a size where it's running very slow though. There are about 10
> million log lines p
I should also specify how my inserts are happening I guess. I'm
actually doing the logs to flat files and then inserting them into the
database on an hourly basis using COPY, so I don't need to worry as much
about the log insert speed as I do the reporting.
On 5/21/2009 2:36 PM, Scott Marlowe
On Thu, May 21, 2009 at 1:36 PM, Scott Marlowe wrote:
>
Below, I meant with a logging / reporting database...
> With a logging database you're optimizing two often opposing actions.
> Lots of small inserts in a stream that HAVE to get processed and put
> in efficiently. This is often accomplish
On Thu, May 21, 2009 at 1:39 PM, Alex Thurlow wrote:
> I should also specify how my inserts are happening I guess. I'm actually
> doing the logs to flat files and then inserting them into the database on an
> hourly basis using COPY, so I don't need to worry as much about the log
> insert speed a
I'm attempting to create an inventory of trees. Here's a simplified,
sample table:
CREATE TABLE tree (
tree_id SERIAL PRIMARY KEY,
tree_species_id INT NOT NULL REFERENCES tree_species,
tree_location POINT NOT NULL,
tree_install_date DATE NOT NULL,
tree
Karl Nack writes:
> I notice the row count does not reflect the newly-inserted row, which
> suggests that the trigger is not seeing changes made to the table. This
> seems to be exactly opposite of what's in the manual:
> http://www.postgresql.org/docs/8.3/interactive/trigger-datachanges.html
>
you have to change RETURN NULL; with RETURN NEW;
On 05/21/2009 04:57 PM, Karl Nack wrote:
I'm attempting to create an inventory of trees. Here's a simplified,
sample table:
CREATE TABLE tree (
tree_id SERIAL PRIMARY KEY,
tree_species_id INT NOT NULL REFERENCES tree_species,
tree_location POIN
On 21/05/2009 21:36, Tom Lane wrote:
> Karl Nack writes:
>> http://www.postgresql.org/docs/8.3/interactive/trigger-datachanges.html
>> http://www.postgresql.org/docs/8.3/interactive/trigger-example.html
> I'm not sure if the cited portions of the manual ought to contain notes
> about this or not
The reason is that you've declared the function STABLE
Yes, that did it!
I'm not sure if the cited portions of the manual ought to contain notes
about this or not. It seems a bit off-topic for them, but if other
people have been bit by this, then maybe ... comments anyone?
Perhaps this shou
kentil...@gmail.com (Kenneth Tilton) writes:
> Just looking for postgres "best practices" input from the veterans:
OIDs are decidedly a bad idea; the difference between "natural" IDs
and "surrogate" IDs is a general database issue that is fairly well
documented in the literature and is not notably
> > Hi,
> >I have stored a compressed string in a table field.
> > The compressed string is created by zlib using python.
> > I want to decompress this string by zlib under plpy but plpy fails to do
> > so. Is plpy not support decompression? Why?
> >
> > Thanks!
>
> A bit more information is r
Keith D. Evans wrote:
We usually run postgresql on a private machine (gravity) but due to
space, we have moved the database to a different machine through afs (a
local network at the university). We do not want the private machine to
be accessible to outside users, so our web pages are on the u
On Thursday 21 May 2009 3:26:22 pm Timmy wrote:
>
> Yes, most of your guess is correct.
> I'm using postgresql 8.3.x and ms windows 2000.
> The compressed string is saved to the table in binary
> format using the psycopg. I had set the table field to bytea data type.
> I want to use the plpythonu
Hi.
I am wondering whether the following problem can
be avoided by using Cascade Deleting while the DB
is in Read Committed Isolation Level:
In the following scenario, The "DEL item1 from tb_pk"
command fails because of involating foreign key
constraints.
(The tb_fk1, tb_fk2, and tb_fk3 tab
Hi,
I have a database that was created with SQL-ASCII encoding
(unfortunately). I ran pg_restore to load the struct and data into a
new database with UTF-8 encoding but no surprise- I'm seeing this
error for a number of tables:
pg_restore: [archiver (db)] COPY failed: ERROR: invalid byte sequen
I was hoping to not have to change all my code to automate the
partitioning table creation stuff, but if that's really the best way,
I'll check it out. Thanks for the advice.
Alex Thurlow
Blastro Networks
http://www.blastro.com
http://www.roxwel.com
http://www.yallwire.com
On 5/21/2009 2:2
Hi,
why column "acoltest" is not found by the subselect in this select:
SELECT
acol + 100 as acoltest,
(select max(t) from mytab where anothercol=acoltest) as col2
FROM mytab2
group by somet
???
Only columns belonging to a table can be used in a subselect??? What about
"calculated
> I have a database that was created with SQL-ASCII encoding
> (unfortunately). I ran pg_restore to load the struct and data into a
> new database with UTF-8 encoding but no surprise- I'm seeing this
> error for a number of tables:
>
> pg_restore: [archiver (db)] COPY failed: ERROR: invalid byte
58 matches
Mail list logo
