All targets that used mvsw61xx have switched to upstream mv88e6xxx DSA
driver, so it can be removed.
Signed-off-by: DENG Qingfang
---
package/kernel/linux/modules/netdevices.mk| 14 -
target/linux/generic/config-5.4 |1 -
.../generic/files/drivers/net/phy/mvsw61xx.c
The GPIO base of MT7621 GPIO 0~31 is 480 on kernel 5.4
Fix the GPIO numbering.
Signed-off-by: DENG Qingfang
---
.../linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d
Hi Georgi,
> 2. WRT3200ACM has two Ethernet interfaces. Isn’t it more efficient to have
> dedicated interfaces for LAN and WAN compared to the DSA model which uses
> only one of them, and creates multiple interfaces using VLANs?
You only have to worry about that if you have (upload + download) >
Signed-off-by: DENG Qingfang
---
package/firmware/ath10k-ct-firmware/Makefile | 68 ++--
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/package/firmware/ath10k-ct-firmware/Makefile
b/package/firmware/ath10k-ct-firmware/Makefile
index cdfd3fb940..1733f53a5b
The kernel bump to 5.4 removed the mx25l25635f hack, and the upstream
property "broken-flash-reset" should be used instead.
Signed-off-by: DENG Qingfang
---
target/linux/ramips/dts/mt7620a_youku_yk1.dts| 3 ++-
target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts | 3 ++-
ta
Hi,
On Thu, Jan 21, 2021 at 5:37 PM David Bauer wrote:
>
> Is this dependent on board design? The need for the old hack should be fixed
> by
> this upstream commit [0]. Given that commit adds SNOR_F_4B_OPCODES for the
> mx25l25635f, it should in turn disable the hack enabled by
> broken-flash-r
The kernel bump to 5.4 has removed the mx25l25635f hack, and the
mx25l25635f compatible is no longer required.
Signed-off-by: DENG Qingfang
---
target/linux/ramips/dts/mt7620a_youku_yk1.dts| 2 +-
target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts | 2 +-
target/linux/ramips/dts
rris-build/-/issues/165
Signed-off-by: DENG Qingfang
---
...y-switchdev-of-disappearance-of-old-.patch | 126 +
...r-when-a-non-legacy-FDB-operation-fa.patch | 52
...e-switchdev_notifier_fdb_info-in-dsa.patch | 226 +++
...tchdev-event-implementation-under-th.patch | 85 ++
On Tue, Feb 2, 2021 at 8:14 PM Tad wrote:
>
> I've tested this working well!
> Devices can roam during iperf with no loss!
> Thank you!
>
>
> There are some errors in dmesg:
> wrt1900acv1
> mv88e6085 f1072004.mdio-mii:00: ATU member violation for [mac] portvec 20
> spid 3
>
> wrt1200ac
> mv88e608
On Tue, Feb 2, 2021 at 9:22 PM Tobias Waldekranz wrote:
>
> >
> > Tobias, what happens if the switch receives a frame that violates ATU
> > portvec member? Is the frame trapped to the CPU or dropped?
>
> The frame will be dropped. So the flow will be blocked until the DSA
> driver removes the stat
On Wed, Feb 3, 2021 at 4:20 PM Tobias Waldekranz wrote:
>
> AFAIK, no. There is a per-port bit that you can set to ignore the
> errors, i.e. no violation is generated, but I am pretty sure that the
> frame is still dropped.
I just tested on my WRT1900AC v2. It seems that the CPU can receive
those
ll not confuse users.
Link: https://lore.kernel.org/netdev/20210106095136.224739-1-olte...@gmail.com/
Link:
https://lore.kernel.org/netdev/20210116012515.3152-1-tob...@waldekranz.com/
Ref: https://gitlab.nic.cz/turris/turris-build/-/issues/165
Signed-off-by: DENG Qingfang
---
v1 -> v2:
D
the critical section.
This fixes the "Ghost VLAN" artifact[1] in MT7530/7621 when the VLAN
operation and the swconfig LED link status poll race between each other.
[1] https://forum.openwrt.org/t/mysterious-vlan-ids-on-mt7621-device/64495
Signed-off-by: DENG Qingfang
---
Please backpo
As the name suggests, act_gact has the generic actions such as dropping
and accepting packets, so move it into kmod-sched-core.
Signed-off-by: DENG Qingfang
---
package/kernel/linux/modules/netsupport.mk | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/kernel
After the commit, devices with mtd-concat such as HC5962 no longer work.
Several "sysfs: cannot create duplicate filename '/devices/..." warnings
can be seen in kernel log.
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.ope
Signed-off-by: DENG Qingfang
---
package/network/utils/ipset/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/network/utils/ipset/Makefile
b/package/network/utils/ipset/Makefile
index 2cb6ec981e..0bab21a12f 100644
--- a/package/network/utils/ipset
This reverts commit 81764319637f408623ed9f4bae3f0d149b010f07.
After said commit, users report that MT7615 no longer works on boot
and have to manually enable WiFi (via command "wifi") to make it work
Fixes FS#2546
Signed-off-by: DENG Qingfang
---
package/kernel/mt76/Makefile | 1
Update ccache to 3.7.6
Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_6
Signed-off-by: DENG Qingfang
---
tools/ccache/Makefile | 4 ++--
tools/ccache/patches/100-honour-copts.patch | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a
echi->ehci
ochi->ohci
Signed-off-by: DENG Qingfang
---
target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts | 6 +++---
target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts | 6 +++---
target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi | 6 +++---
target/linux/ath
Replace "usb_ochi" with "usb_ohci", and "usb_echi" with "usb_ehci"
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Replace "usb_ochi" with "usb_ohci", and "usb_echi" with "usb_ehci"
Signed-off-by: DENG Qingfang
---
target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts | 6 +++---
target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts | 6 +++---
target/linux/ath79/
instructions:
Stock to OpenWrt:
Upload factory.bin in stock firmware's upgrade page,
do not preserve settings
OpenWrt to stock:
Push and hold the reset button for 5s while power cycling to
enter recovery mode;
Visit 192.168.1.1 and upload stock firmware
Signed-off-by: DENG Qin
instructions:
Stock to OpenWrt:
Upload factory.bin in stock firmware's upgrade page,
do not preserve settings
OpenWrt to stock:
Push and hold the reset button for 5s while power cycling to
enter recovery mode;
Visit 192.168.1.1 and upload stock firmware
Signed-off-by: DENG Qin
Move the set-irq-affinity script to mt7621 because it is the only
SMP subtarget.
Signed-off-by: DENG Qingfang
---
.../ramips/{ => mt7621}/base-files/etc/init.d/set-irq-affinity| 0
1 file changed, 0 insertions(+), 0 deletions(-)
rename target/linux/ramips/{ => mt7621}/base-files/etc/
*:1c wlan2g/wan/label
0x8004 *:20 wlan5g
0xe000 *:1b lan
0xe006 *:1a not used in stock fw
Signed-off-by: DENG Qingfang
---
Changes since v2:
Flattened pinctrl node
Add MAC addresses map in commit message
Use kilobytes as JCG_MAXSIZE unit
---
.../ramip
x-firmware: Update firmware file for Intel Bluetooth 9260
ebd40c6 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1886
Signed-off-by: DENG Qingfang
---
package/firmware/linux-firmware/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/firmware/linux-firmwa
Update iptables to 1.8.4
ChangeLog:
https://netfilter.org/projects/iptables/files/changes-iptables-1.8.4.txt
Signed-off-by: DENG Qingfang
---
package/network/utils/iptables/Makefile | 6 +++---
.../utils/iptables/patches/600-shared-libext.patch | 12 ++--
.../patches
Throughput trigger support for MT7620 has been added, so switch to it
Remove HC5661 non-existent 5GHz LED
Signed-off-by: DENG Qingfang
---
target/linux/ramips/dts/mt7620a_hiwifi_hc5661.dts| 6 +-
target/linux/ramips/dts/mt7620a_hiwifi_hc5761.dts| 2 ++
target/linux/ramips
HC5661 does not have 5GHz WiFi or LED
Fixes: e6e373d3480e ("ramips: Add DTS files for HiWiFi HC5x61 models")
Signed-off-by: DENG Qingfang
---
target/linux/ramips/dts/mt7620a_hiwifi_hc5661.dts | 5 -
1 file changed, 5 deletions(-)
diff --git a/target/linux/ramips/dts/mt7620a_hiw
Throughput trigger support for MT7620 has been added, so switch to it
Signed-off-by: DENG Qingfang
---
Change since v1:
Split out non-existent LED removal part
Tested on HC5761
---
target/linux/ramips/dts/mt7620a_hiwifi_hc5661.dts| 1 +
target/linux/ramips/dts/mt7620a_hiwifi_hc5761
Update ccache to 3.7.7
Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_7
Signed-off-by: DENG Qingfang
---
tools/ccache/Makefile | 4 ++--
tools/ccache/patches/100-honour-copts.patch | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a
Fixes: 641a93f0f226 ("ath10k-firmware: update wave 1 firmware to
10.2.4-1.0-00047")
Signed-off-by: DENG Qingfang
---
package/firmware/ath10k-firmware/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/firmware/ath10k-firmware/Makefile
b/package/firmw
Update ccache to 4.2.1
Signed-off-by: DENG Qingfang
---
tools/ccache/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/ccache/Makefile b/tools/ccache/Makefile
index ff0204ae19..b4dc81 100644
--- a/tools/ccache/Makefile
+++ b/tools/ccache/Makefile
The new EEE patch is accepted upstream, so backport it and replace the
current one.
Cc: René van Dorst
Signed-off-by: DENG Qingfang
---
...-mt7530-Add-support-for-EEE-features.patch | 120 +
...-mt7530-Add-support-for-EEE-features.patch | 120 +
...-net-dsa
Update binutils 2.35 to 2.35.2
Signed-off-by: DENG Qingfang
---
toolchain/binutils/Config.in| 6 +++---
toolchain/binutils/Config.version | 4 ++--
toolchain/binutils/Makefile | 4 ++--
.../{2.35.1
Add binutils version 2.36.1
Signed-off-by: DENG Qingfang
---
toolchain/binutils/Config.in | 4 ++
toolchain/binutils/Config.version | 6 ++-
toolchain/binutils/Makefile | 4 ++
.../2.36.1/300-001_ld_makefile_patch.patch| 22
vice/64495
Signed-off-by: DENG Qingfang
---
.../drivers/net/ethernet/mediatek/mt7530.c | 16 ++--
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git
a/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mt7530.c
b/target/linux/ramips/files-4.14/drivers/ne
Hi Hauke,
On Sat, May 1, 2021 at 9:48 PM Hauke Mehrtens wrote:
>
> These patches are now applied in a different order compared to the
> upstream kernel, could you please have a look.
I think we should move 0600~0602 patches to backport-5.4, then apply
René's upstream patch as-is on top of that.
Hi Hauke,
On Sat, May 1, 2021 at 10:06 PM Hauke Mehrtens wrote:
>
> Yes, I think that is a good idea.
>
> Will you prepare a patch?
While trying that, I found some patches in pending-5.4 that are also
supposed to be in backport, causing another patch conflict.
Cc: Ilya
Alternatively, you can r
The higher 16-bit of EEE register was overwritten by mistake, fix that.
Fixes: 5b9ba4a93e83 ("generic: mt7530: support adjusting EEE")
Signed-off-by: DENG Qingfang
---
.../pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch | 2 +-
1 file changed, 1 insertion(+), 1 deletio
Allow MTU up to 2026 on mediatek, ramips/mt7621 targets
Signed-off-by: DENG Qingfang
---
...thernet-mediatek-support-setting-MTU.patch | 138 ++
...1-net-dsa-mt7530-support-setting-MTU.patch | 112 ++
...-dsa-mt7530-enable-MTU-normalization.patch | 36 +
3 files
Sync iptables FLOWOFFLOAD target with upstream nft_flow_offload.c, which
fixes the issue.
Fixes: FS#3649
Signed-off-by: DENG Qingfang
---
Note: I am by no means an expert on Netfilter subsystem. I just kind of
copied and pasted upstream nft_flow_offload.c here, which seemed to work.
A fix for
Commit 8222f8e1b9be overrides AR8031's PHY features, making its fibre
feature unavailable. To fix that, override it again with the correct
features flag in ramips patch.
Reported-by: CHEN Minqiang
Fixes: 8222f8e1b9be ("ath79: fix link mode support list on UniFi AC")
Signed-off-by
ath79: fix link mode support list on UniFi AC")
Fixes: 6d4ef6792612 ("kernel: bump 5.4 to 5.4.113")
Signed-off-by: DENG Qingfang
---
v1 -> v2: do not override .features
.../ramips/patches-5.10/710-at803x.patch | 13 ++--
.../linux/ramips/patches-5.4/991-at803x.patch
Hi,
On Fri, Jun 4, 2021 at 3:37 PM David Bauer wrote:
> As the original patch still has to be backported to 21.02, I'd propose
> to remove my hacks and instead properly backport c329e5af and 8f7e8762
> from upstream.
>
> This would remove the need to hack around the first hack and hopefully
> les
Hi,
On Sat, Jun 5, 2021 at 12:19 AM David Bauer wrote:
>
> See the commit "generic: backport at803x fixes" in my staging tree [0].
Your patch still adds .config_aneg to AR8035, not AR8031.
>
> I'll test this later this weekend on my AC Lite.
>
> [0] https://git.openwrt.org/?p=openwrt/staging/bl
Hi René,
On Mon, Jun 7, 2021 at 2:44 AM René van Dorst wrote:
> Thank for fixing.
> But I can't apply this patch clean on top of the current master
> 04a260911ca0f10a0e37c487c220e1aae3623dda.
> Which commit/branch are you using?
David's patches have been applied to master, you can test it now.
Hi David,
Unfortunately, the issue is still not resolved, according to Minqiang.
Reverting your 2 commits and applying my patch fixes the issue.
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/op
On Sat, Jun 19, 2021 at 08:36:10PM +0200, Hauke Mehrtens wrote:
> On a DSA switch the ports have an upper device, the CPU device, e.g.
> eth0. This device has to be in up state to bring up the lower devices
> like lan1.
>
> Parse the link device from "ip link show" and bring it into up stated
> be
With commit 2e17c710954b, there is no need to bring up DSA master port
manually.
Signed-off-by: DENG Qingfang
---
.../lib/preinit/07_mt7621_bringup_dsa_master | 20 ---
1 file changed, 20 deletions(-)
delete mode 100644
target/linux/ramips/mt7621/base-files/lib/preinit
For details see FS#3690, created months ago but no progress has been made.
I hope it can be fixed ASAP.
Regards,
Qingfang
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
I tried to run OpenWrt with a bleeding-edge net-next kernel (commit
0e804326759d), then noticed that only the first port of a bridge is
brought up automatically, the rest are down and not members of the
bridge.
i.e. with the following settings
network.@device[0]=device
network.@device[0].ports='la
As we can't upgrade to 21.02 while keeping config anyway, remove the
migration script.
Signed-off-by: DENG Qingfang
---
.../ieee80211/00-wifi-config-migrate | 41 ---
1 file changed, 41 deletions(-)
delete mode 100644
target/linux/mvebu/cortexa9/base-file
Hi,
This series backports some patches from upstream to address the current
MT7530 DSA driver's problems.
Thanks.
DENG Qingfang (6):
kernel: backport MediaTek jumbo frame support
kernel: backport MT7530 ageing time support
kernel: backport MT7530 VLAN fix
kernel: backport MT753
Allow MTU up to 2026 on mediatek, ramips/mt7621 targets.
Signed-off-by: DENG Qingfang
---
...thernet-mediatek-support-setting-MTU.patch | 138 ++
...1-net-dsa-mt7530-support-setting-MTU.patch | 112 ++
...-dsa-mt7530-enable-MTU-normalization.patch | 36 +
3
Allow setting ageing time from 1 to 1,048,576 seconds.
Signed-off-by: DENG Qingfang
---
...a-mt7530-support-setting-ageing-time.patch | 99 +++
1 file changed, 99 insertions(+)
create mode 100644
target/linux/generic/backport-5.10/764-v5.11-net-dsa-mt7530-support-setting
Fix FDB learning bugs when VLAN filtering is enabled.
Signed-off-by: DENG Qingfang
---
...disable-learning-on-standalone-ports.patch | 65 +
...enable-assisted-learning-on-CPU-port.patch | 102 +++
...se-independent-VLAN-learning-on-VLAN.patch | 262 ++
...-mt7530-set
Use hardware to forward multicast traffic instead of trapping to the
host.
Signed-off-by: DENG Qingfang
---
...et-dsa-mt7530-support-MDB-operations.patch | 171 ++
1 file changed, 171 insertions(+)
create mode 100644
target/linux/generic/backport-5.10/770-v5.15-net-dsa-mt7530
Add support for MediaTek Gigabit Ethernet PHYs found in MT7530.
Fix some link up/down issues.
Signed-off-by: DENG Qingfang
---
...MediaTek-Gigabit-Ethernet-PHY-driver.patch | 162 ++
target/linux/generic/config-5.10 | 1 +
target/linux/mediatek/mt7622/config-5.10
Support MT7530 PHY link change interrupts, and enable for MT7621.
Signed-off-by: DENG Qingfang
---
...net-dsa-mt7530-add-interrupt-support.patch | 428 ++
target/linux/ramips/dts/mt7621.dtsi | 3 +
2 files changed, 431 insertions(+)
create mode 100644
target/linux
On Sun, Feb 6, 2022 at 2:23 AM Hauke Mehrtens wrote:
>
> On 2/5/22 19:21, Rosen Penev wrote:
> > On Sat, Feb 5, 2022 at 10:12 AM Hauke Mehrtens wrote:
> >>
> >> On 2/3/22 13:06, DENG Qingfang wrote:
> >>> Hi,
> >>>
> >>> This
On Sun, Feb 6, 2022 at 2:43 AM Hauke Mehrtens wrote:
>
> Hi,
>
> When I remove this check it works for me:
If you change the check to PHY_INTERFACE_MODE_NA, does it still work?
> ---
> [1.257277] mtk_hsdma 1b007000.dma-controller: MediaTek HSDMA driver
> registered
> [1.3
Support MT7530 PHY link change interrupts, and enable for MT7621.
Signed-off-by: DENG Qingfang
Tested-by: Arınç ÜNAL
Tested-by: Stijn Tintel
---
...net-dsa-mt7530-add-interrupt-support.patch | 428 ++
target/linux/ramips/dts/mt7621.dtsi | 3 +
2 files changed, 431
Add support for MediaTek Gigabit Ethernet PHYs found in MT7530.
Fix some link instability issues.
Signed-off-by: DENG Qingfang
---
v2: removed interface mode check, should work for MT7531.
...MediaTek-Gigabit-Ethernet-PHY-driver.patch | 159 ++
target/linux/generic/config-5.10
On Sun, Feb 6, 2022 at 3:39 PM Arınç ÜNAL wrote:
>
> Can you also send a patch to remove the phydev->interface !=
> PHY_INTERFACE_MODE_INTERNAL check from upstream?
Sure.
+Cc: Andrew Lunn
>
> Tested-by: Arınç ÜNAL
>
> Arınç
___
openwrt-devel mailing
Support MT7530 PHY link change interrupts, and enable for MT7621.
For external MT7530, a GPIO IRQ line is required, which is
board-specific, so it should be added to each DTS. In case the
interrupt-controller property is missing, it will fall back to
polling mode.
Signed-off-by: DENG Qingfang
Support MT7530 PHY link change interrupts, and enable for MT7621.
For external MT7530, a GPIO IRQ line is required, which is
board-specific, so it should be added to each DTS. In case the
interrupt-controller property is missing, it will fall back to
polling mode.
Signed-off-by: DENG Qingfang
%20Center/Spectre-BHB
Fixes: 9a038e7fd12e ("generic: 5.15: copy config and patch from 5.10")
Fixes: 048f0b170296 ("kernel: bump 5.10 to 5.10.105")
Signed-off-by: DENG Qingfang
---
target/linux/bcm27xx/bcm2711/config-5.15 | 1 +
target/linux/generic/config-5.10 | 2 +-
Update iw to 5.4
This increases the ipk size of iw-tiny/full by about 400 bytes
Signed-off-by: DENG Qingfang
---
package/network/utils/iw/Makefile | 6 +-
.../utils/iw/patches/001-nl80211_h_sync.patch | 111 +-
.../utils/iw/patches/200-reduce_size.patch| 30
Update iproute2 to 5.5.0
Enable LTO to save several KB of size
Signed-off-by: DENG Qingfang
---
package/network/utils/iproute2/Makefile| 8
.../network/utils/iproute2/patches/100-configure.patch | 2 +-
.../iproute2/patches/115-add-config-xtlibdir.patch | 2
0.2.4-1.0-00047
6d19154 ath10k: QCA6174 hw3.0: update board-2.bin
c4586ff linux-firmware: Update AMD cpu microcode
Signed-off-by: DENG Qingfang
---
package/firmware/linux-firmware/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/firmware/linux-firmwar
Update ncurses to 6.2
Signed-off-by: DENG Qingfang
---
package/libs/ncurses/Makefile | 6 +++---
.../100-ncurses-5.6-20080112-urxvt.patch | 2 +-
.../101-ncurses-5.6-20080628-kbs.patch| 20 +--
.../patches/102-ncurses-5.9-gcc-5.patch | 2
through the slow path.
Use this as a workaround, until the bug is fixed upstream properly.
Run-tested with 2 MT7621 APs.
[1] https://github.com/openwrt/openwrt/pull/2798
[2] https://lore.kernel.org/netdev/20200405150915.gd161...@lunn.ch/
Signed-off-by: DENG Qingfang
---
...a-mt7530-enable-learning
NAND driver was dropped in the 5.4 bump, so enable it back
Fixes: 50c6938b95a0 ("bcm53xx: add v5.4 support")
Signed-off-by: DENG Qingfang
---
target/linux/bcm53xx/config-5.4 | 4
1 file changed, 4 insertions(+)
diff --git a/target/linux/bcm53xx/config-5.4 b/target/linux/bcm53xx/
NAND driver was dropped in the 5.4 bump, so enable it back
Fixes: 50c6938b95a0 ("bcm53xx: add v5.4 support")
Signed-off-by: DENG Qingfang
---
v1->v2
- Remove duplicate symbol
target/linux/bcm53xx/config-5.4 | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a
Update ccache to 3.7.9
Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_9
Signed-off-by: DENG Qingfang
---
tools/ccache/Makefile | 4 ++--
tools/ccache/patches/100-honour-copts.patch | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a
They are not used at all.
Signed-off-by: DENG Qingfang
---
target/linux/ipq40xx/config-4.19 | 5 -
target/linux/ipq40xx/config-5.4 | 6 --
2 files changed, 11 deletions(-)
diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19
index 23eb5ca589..7cea66e50d
The current one only looks for mt76x2e and mt7603e, and
does not work for 2 or more same Wi-Fi chips.
Refactor the script to cover those cases.
Signed-off-by: DENG Qingfang
---
.../mt7621/base-files/etc/init.d/set-irq-affinity | 26 ++
1 file changed, 7 insertions(+), 19
A direct upgrade from previous swconfig version with incompatible
settings to DSA will break the internet.
Remove SUPPORTED_DEVICES so users cannot upgrade directly.
Signed-off-by: DENG Qingfang
---
target/linux/mvebu/image/cortexa9.mk | 7 ---
1 file changed, 7 deletions(-)
diff --git a
Hi
On Fri, Jun 26, 2020 at 3:03 AM Jakov Petrina wrote:
>
> Hi Deng,
>
> On 25/06/2020 20:32, DENG Qingfang wrote:
> > Commit 76f9aa6f4bfd12fba34fc44aef890c48d4fb1024 should backport
> > support for mvneta XDP, but I can't load it.
> >
> > # ip link
Hi,
> +PKG_SOURCE:=v$(PKG_VERSION).tar.gz
This will end up with a file named "v2.16.7.tar.gz" in dl folder, which could
be confusing.
> +PKG_SOURCE_URL:=https://github.com/ARMmbed/mbedtls/archive/
> +PKG_HASH:=c95b11557ee97d2bdfd48cd57cf9b648a6cddd2ca879e3c35c4e7525f2871992
You can use the fol
Add binutils version 2.35
Signed-off-by: DENG Qingfang
---
toolchain/binutils/Config.in | 4 ++
toolchain/binutils/Config.version | 4 ++
toolchain/binutils/Makefile | 4 ++
.../2.35/300-001_ld_makefile_patch.patch | 22 +++
.../400
Signed-off-by: DENG Qingfang
---
toolchain/gcc/Config.version | 2 +-
toolchain/gcc/common.mk | 4 ++--
.../gcc/patches/{10.1.0 => 10.2.0}/002-case_insensitive.patch | 0
.../gcc/patches/{10.1.0 => 10.2.
Move the separate mt76 firmware packages to firmware section
Signed-off-by: DENG Qingfang
---
package/kernel/mt76/Makefile | 78 ++
target/linux/mediatek/image/mt7622.mk | 4 +-
target/linux/mediatek/mt7622/target.mk | 2 +-
target/linux/ramips/image/mt7621
Update binutils 2.35 to 2.35.1
Signed-off-by: DENG Qingfang
---
toolchain/binutils/Config.in| 6 +++---
toolchain/binutils/Config.version | 4 ++--
toolchain/binutils/Makefile | 4 ++--
.../{2.35 => 2.3
The PHY name has been changed to "mt7530-0" since IRQ support was added
to MT7530 driver.
Fixes: f9cfe7af1f1f ("kernel: backport MT7530 IRQ support")
Signed-off-by: DENG Qingfang
---
Please also backport this to 22.03 branch, thanks.
target/linux/ramips/dts/mt7621_xiaomi
--- Begin Message ---
Commit 76f9aa6f4bfd12fba34fc44aef890c48d4fb1024 should backport
support for mvneta XDP, but I can't load it.
# ip link set dev eth0 xdp obj /tmp/bpf.o sec xdp1
RTNETLINK answers: Not supported
strace output:
set_tls(0xb6f5f5d8) = 0
set_tid_address(0xb6f6
87 matches
Mail list logo
