Hi René, On Mon, Jun 7, 2021 at 2:44 AM René van Dorst <opensou...@vdorst.com> wrote: > Thank for fixing. > But I can't apply this patch clean on top of the current master > 04a260911ca0f10a0e37c487c220e1aae3623dda. > Which commit/branch are you using?
David's patches have been applied to master, you can test it now. > > # patch -p1 < p.patch > patching file target/linux/ramips/patches-5.10/710-at803x.patch > Hunk #2 FAILED at 147. > 1 out of 2 hunks FAILED -- saving rejects to file > target/linux/ramips/patches-5.10/710-at803x.patch.rej > patching file target/linux/ramips/patches-5.4/991-at803x.patch > Hunk #2 FAILED at 146. > 1 out of 2 hunks FAILED -- saving rejects to file > target/linux/ramips/patches-5.4/991-at803x.patch.rej > > > # cat target/linux/ramips/patches-5.10/710-at803x.patch.rej > --- target/linux/ramips/patches-5.10/710-at803x.patch > +++ target/linux/ramips/patches-5.10/710-at803x.patch > @@ -147,3 +147,12 @@ Signed-off-by: René van Dorst <opensou...@vdorst.com> > .flags = PHY_POLL_CABLE_TEST, > .probe = at803x_probe, > .remove = at803x_remove, > +@@ -1119,7 +1203,7 @@ static struct phy_driver at803x_driver[] > + .get_wol = at803x_get_wol, > + .suspend = at803x_suspend, > + .resume = at803x_resume, > +- .features = PHY_GBIT_FEATURES, > ++ /* PHY_GBIT_FEATURES */ > + .read_status = at803x_read_status, > + .aneg_done = at803x_aneg_done, > + .ack_interrupt = &at803x_ack_interrupt, > > Greats, > > René > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
