Re: [OpenWrt-Devel] [PATCH] kernel: tolerate using UBI/UBIFS on MLC flash (FS#1830)

On Thursday, October 25, 2018 10:57:48 AM CEST Koen Vandeputte wrote: > > On 23.10.18 17:43, Christian Lamparter wrote: > > Sorry, hit "Send" by accident > > > > On Tuesday, October 23, 2018 2:37:16 PM CEST Koen Vandeputte wrote: > >> On 22.10.18 19:27,

Re: [OpenWrt-Devel] [PATCH] netgear r7800: Fix mac address of radios.

Hello, On Thursday, October 25, 2018 11:08:02 PM CEST gree...@candelatech.com wrote: > From: Ben Greear > > Reloading the driver causes the phyX to change, and that caused > the MAC address to change. Instead, match on pci-bus which should > be immutable. > > Signed-off-by: Ben Greear Mathia

[OpenWrt-Devel] [PATCH] ipq806x: add ath10k calibration data MAC addresses patching

ed-by: Ben Greear Signed-off-by: Christian Lamparter --- .../etc/hotplug.d/firmware/11-ath10k-caldata | 64 +-- .../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 37 --- 2 files changed, 57 insertions(+), 44 deletions(-) delete mode 100644 target/linux/ipq806x/base-file

Re: [OpenWrt-Devel] brcm2708: add kernel 4.14 support

(Did some EMails get mangled?: "openwrt-devel@lists.openwrt.org j...@openwrt.org" ") On Monday, November 12, 2018 4:55:12 PM CET Stijn Tintel wrote: > On 12/11/18 15:26, Alexandru Ardelean wrote: > > [Related to RPi] The RPi kernel seems a bit hard to maintain in the > > OpenWrt tree, because if y

[OpenWrt-Devel] [PATCH v2][18.06] apm821xx: MBL: load kernel/dtb from SATA 0:1 first

only be called once. (In theory it could be omitted completely since the on-flash boot script already initializes SATA to load the on-disk boot script.) Tested on MBL Duo (all possible combination of disks) and MBL Single Signed-off-by: Freddy Leitner Acked-by: Christian Lamparter --- Com

Re: [OpenWrt-Devel] [PATCH v2] apm821xx, ath79, ipq40xx, ipq806x, lantiq, ramips: base-files: Use generic diag.sh

iag.sh has moved to base-files package in this > commit: > > base-files: diag.sh: Make it more generic towards DTS so it could be reused > > Signed-off-by: Petr Štetiar Tested-by: Christian Lamparter (apm821xx and ipq40xx) I think there is a misunderstanding bound to happen here. Ma

Re: [OpenWrt-Devel] [PATCH] mac80211: Update to version 4.19.7-1

On Friday, December 7, 2018 8:49:33 PM CET Hauke Mehrtens wrote: > This updates the backports package used in mac80211 to version 4.19.7-1 > which is based on kernel 4.19.7. This integrates all the stable fixes > introduces in this kernel version. > > The deleted patches are not needed any more be

[OpenWrt-Devel] [PATCH 4/8] ipq40xx: specify "firmware" partition format for ZyXEL WRE6606

Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts| 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b

[OpenWrt-Devel] [PATCH 8/8] ipq806x: specify "firmware" partition format for NEC Aterm WG2600HP

Specify firmware partition format by compatible string. Cc: INAGAKI Hiroshi Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom

[OpenWrt-Devel] [PATCH 6/8] ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300

Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b

[OpenWrt-Devel] [PATCH 7/8] ipq40xx: specify "firmware" partition format for EnGenius EAP1300

Specify firmware partition format by compatible string. Cc: Steven Lin Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts| 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018

[OpenWrt-Devel] [PATCH 1/8] kernel: add DT binding support to the fit parser

It allows specifying default and Netgear parsers directly in the DT. Signed-off-by: Christian Lamparter --- .../linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_fit.c | 6 ++ 1 file changed, 6 insertions(+) diff --git a/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_fit.c b

[OpenWrt-Devel] [PATCH 3/8] ipq40xx: specify "firmware" partition format for Netgear EX61[50]0v2

Specify firmware partition format by compatible string. Cc: David Bauer Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018

[OpenWrt-Devel] [PATCH 2/8] ipq40xx: specify "firmware" partition format for AVM Fritz!Box 4040

Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts b

[OpenWrt-Devel] [PATCH 5/8] ipq40xx: specify "firmware" partition format for Compex WPJ428

Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter --- .../ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b

Re: [OpenWrt-Devel] [PATCH 8/8] ipq806x: specify "firmware" partition format for NEC Aterm WG2600HP

On Sunday, December 9, 2018 4:57:10 PM CET INAGAKI Hiroshi wrote: > On 2018/12/10 0:34, Christian Lamparter wrote: > > Specify firmware partition format by compatible string. > > > > Cc: INAGAKI Hiroshi > > Signed-off-by: Christian Lamparter > > --- > >

Re: [OpenWrt-Devel] [PATCH 1/8] kernel: add DT binding support to the fit parser

On Monday, December 10, 2018 10:28:22 PM CET John Crispin wrote: > > On 10/12/2018 16:47, Piotr Dymacz wrote: > > Hi Christian, > > > > On 09.12.2018 16:34, Christian Lamparter wrote: > >> It allows specifying default and Netgear parsers directly in the DT. &

Re: [OpenWrt-Devel] [PATCH] ipq806x: add ath10k calibration data MAC addresses patching

On Wednesday, November 14, 2018 8:39:22 PM CET Ben Greear wrote: > On 11/01/2018 03:18 AM, Felix Fietkau wrote: > > On 2018-10-28 17:39, Christian Lamparter wrote: > >> Ben Greear reported in his patch: > >> |Subject: netgear r7800: Fix mac address of radios. > &

[OpenWrt-Devel] [PATCH v2 2/7] ipq40xx: specify "firmware" partition format for AVM Fritz!Box 4040

Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts b

[OpenWrt-Devel] [PATCH v2 4/7] ipq40xx: specify "firmware" partition format for ZyXEL WRE6606

Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts| 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b

[OpenWrt-Devel] [PATCH v2 5/7] ipq40xx: specify "firmware" partition format for Compex WPJ428

Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter --- .../ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b

[OpenWrt-Devel] [PATCH v2 7/7] ipq40xx: specify "firmware" partition format for EnGenius EAP1300

Specify firmware partition format by compatible string. Cc: Steven Lin Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts| 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018

[OpenWrt-Devel] [PATCH v2 3/7] ipq40xx: specify "firmware" partition format for Netgear EX61[50]0v2

Specify firmware partition format by compatible string. Cc: David Bauer Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018

[OpenWrt-Devel] [PATCH v2 6/7] ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300

Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b

[OpenWrt-Devel] [PATCH v2 1/7] kernel: add DT binding support to the fit parser

It allows specifying default and Netgear parsers directly in the DT. Signed-off-by: Christian Lamparter --- .../linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_fit.c | 6 ++ 1 file changed, 6 insertions(+) diff --git a/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_fit.c b

Re: [OpenWrt-Devel] [PATCH v2 6/7] ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300

On Monday, December 17, 2018 10:31:51 AM CET Alberto Bursi wrote: > > On 15/12/18 22:02, Christian Lamparter wrote: > > Specify firmware partition format by compatible string. > > > > Signed-off-by: Christian Lamparter > > --- > > .../files-4.14/arch/ar

Re: [OpenWrt-Devel] [PATCH v2 6/7] ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300

On Monday, December 17, 2018 1:08:27 PM CET you wrote: > > On 17/12/18 12:39, Christian Lamparter wrote: > > On Monday, December 17, 2018 10:31:51 AM CET Alberto Bursi wrote: > >> On 15/12/18 22:02, Christian Lamparter wrote: > >>> Specify firmware part

Re: [OpenWrt-Devel] [PATCH] ipq806x: add ath10k calibration data MAC addresses patching

On Saturday, December 15, 2018 9:10:39 PM CET Christian Lamparter wrote: > On Wednesday, November 14, 2018 8:39:22 PM CET Ben Greear wrote: > > On 11/01/2018 03:18 AM, Felix Fietkau wrote: > > > On 2018-10-28 17:39, Christian Lamparter wrote: > > >> Be

Re: [OpenWrt-Devel] [PATCH] ipq40xx: clean up netgear-dni image generation

On Tuesday, December 18, 2018 2:27:20 AM CET David Bauer wrote: > The NETGEAR EX61x0v2 does only validate the DNI header, neither it needs > the kernel to be a specific size nor a fake filesystem header to be > present. > > This has been tested using the NETGEAR Web-UI and the pushbutton TFTP > re

Re: [OpenWrt-Devel] [PATCH] ipq40xx: add support for ASUS Lyra

On Monday, December 17, 2018 11:08:00 PM CET Marius Genheimer wrote: > SoC: Qualcomm IPQ4019 (Dakota) 717 MHz, 4 cores > RAM: 256 MiB (Nanya NT5CC128M16IP-DI) > FLASH: 128 MiB (Macronix NAND) > WiFi0: Qualcomm IPQ4019 b/g/n 2x2 > WiFi1: Qualcomm IPQ4019 a/n/ac 2x2 > WiFi2: Qualcomm Atheros QCA9

Re: [OpenWrt-Devel] [PATCH] ipq40xx: clean up netgear-dni image generation

On Wednesday, December 19, 2018 12:26:18 AM CET David Bauer wrote: > Hello Christian, > > On 19.12.18 00:14, Christian Lamparter wrote: > > I had no luck with a loaned EX6150v2 and this patch. I tried to sysupgrade > > from the current -snapshot to a newly compiled image w

[OpenWrt-Devel] [PATCH v1] apm821xx: switch MX60(W)'s recovery images to multi-image method

tps://openwrt.org/toh/meraki/mx60#flashing> Signed-off-by: Chris Blake Signed-off-by: Christian Lamparter --- target/linux/apm821xx/image/Makefile | 28 +++- 1 file changed, 3 insertions(+), 25 deletions(-) diff --git a/target/linux/apm821xx/image/Makefile b/target/linu

Re: [OpenWrt-Devel] [PATCH] ipq806x: add ath10k calibration data MAC addresses patching

On Monday, December 17, 2018 11:20:41 PM CET Mathias Kresin wrote: > 17/12/2018 19:05, Christian Lamparter: > > On Saturday, December 15, 2018 9:10:39 PM CET Christian Lamparter wrote: > >> On Wednesday, November 14, 2018 8:39:22 PM CET Ben Greear wrote: > >>> On 11/0

Re: [OpenWrt-Devel] [PATCH] treewide: dts: Unify naming of gpio-keys nodes

On Sunday, December 30, 2018 12:17:25 PM CET Petr Štetiar wrote: > In DTS Checklist[1] we're now demanding proper generic node names, as > the name of a node should reflect the function of the device and use > generic name for that[2]. Everybody seems to be copy&pasting from DTS > files available i

[OpenWrt-Devel] [PATCH 2/2] mac80211: ath10k: remove "ath10k: fix otp failure result" patch

. And finally with the switch to ath10k-ct, which never had the patch or any reports of similar issues, I think it's time to remove this patch since it is no longer needed. Signed-off-by: Christian Lamparter --- .../ath/936-ath10k-fix-otp-failure-result.patch | 11 --- 1 file ch

[OpenWrt-Devel] [PATCH 1/2] brcm2708: boot-part feature integration

to repartition the device! Make sure to have a backup in this case. Signed-off-by: Christian Lamparter --- config/Config-images.in | 1 + target/linux/brcm2708/Makefile| 2 +- target/linux/brcm2708/image/Config.in | 5 - target/linux/brcm2708/image/Makefile | 4 ++-- 4

Re: [OpenWrt-Devel] [PATCH] ath79: align GL-AR750S boardname to other GL.iNet devices

On Tuesday, January 1, 2019 1:03:22 PM CET Christoph Krapp via openwrt-devel wrote: > The sender domain has a DMARC Reject/Quarantine policy which disallows > sending mailing list messages using the original "From" header. > > To mitigate this problem, the original message has been wrapped > auto

Re: [OpenWrt-Devel] [PATCH] treewide: dts: Unify naming of gpio-keys nodes

On Tuesday, January 1, 2019 6:07:40 PM CET Petr Štetiar wrote: > Christian Lamparter [2018-12-31 17:41:34]: > > > I hope you know what you are up against because unless you also do the > > changes > > upstream this will happen again and again. :\ / :) > > My plan

Re: [OpenWrt-Devel] [PATCH] mpc85xx: add support for Sophos RED 15w Rev.1

On Sunday, January 6, 2019 5:29:54 PM CET David Bauer wrote: > Hardware > > CPU: Freescale P1010 PowerPC > RAM: 128M DDR3 > NAND: 128MiB > ETH: RTL8211F SGMII PHY > RTL8367B 5-port RGMII switch > (not connected to SoC - unmanaged) > WiFi: SparkLan WPEA-121N >- Athero

Re: [OpenWrt-Devel] [PATCH v2] mpc85xx: add support for Sophos RED 15w Rev.1

On Tuesday, January 8, 2019 1:20:56 AM CET David Bauer wrote: > Hardware > > CPU: Freescale P1010 PowerPC > RAM: 128M DDR3 > NAND: 128MiB > ETH: RTL8211F SGMII PHY > RTL8367B 5-port RGMII switch > (not connected to SoC - unmanaged) > WiFi: SparkLan WPEA-121N >- Ather

Re: [OpenWrt-Devel] [PATCH] lantiq: Fix gpio-leds for P2812HNUF1 and TDW8980

On Sunday, December 30, 2018 12:40:01 PM CET Petr Štetiar wrote: > While at it rename node name to the generic `leds`. > > Signed-off-by: Petr Štetiar > --- > target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF1.dts | 3 ++- > target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8980.dts

Re: [OpenWrt-Devel] [PATCH 1/2] mpc85xx: use generic diag.sh

On Thursday, January 17, 2019 12:43:12 AM CET David Bauer wrote: > This commit removes the target-specific diag.sh script. This way, the > generic one is used for the target, which uses DT-aliases to specify the > LEDs used. > > This way, we are also able to use different LEDs to indicate differen

[OpenWrt-Devel] [RFT] toolchain/musl: update to version 1.1.21

fixed, including several possible deadlocks, one of which was a new regression in 1.1.20." Signed-off-by: Christian Lamparter --- toolchain/musl/common.mk | 8 toolchain/musl/patches/200-add_libssp_nonshared.patch | 4 ++-- 2 files changed, 6 inser

Re: [OpenWrt-Devel] [PATCH] treewide: dts: Unify naming of gpio-keys nodes

On Thursday, January 3, 2019 10:39:08 PM CET Petr Štetiar wrote: > Christian Lamparter [2019-01-03 18:27:40]: > > > I would try to split up the patch into multiple patches so that > > each maintainer has the chance to act on just his own turf. > > I don't want to

Re: [OpenWrt-Devel] [RFT] toolchain/musl: update to version 1.1.21

On Wednesday, January 23, 2019 2:26:20 PM CET Koen Vandeputte wrote: > Hi Christian, > > fwiw, I've been using every musl git bump up to this release on my > devices offshore. It has been running on ~65 devices covering multiple > arches. (armv6k-mpcore, armv7, mips24, mips74, x86_64) > > Looks

Re: [OpenWrt-Devel] [PATCH 4/4 v2] gemini: Add SL93512R Support

Hello, On Wednesday, January 23, 2019 7:59:58 PM CET Linus Walleij wrote: > This generates images for the StorLink SL93512R reference > design which is supported in kernel v4.19. > > Signed-off-by: Linus Walleij > --- > ChangeLog v1->v2: > - Resend. > --- > target/linux/gemini/image/Makefile |

Re: [OpenWrt-Devel] [RFT] toolchain/musl: update to version 1.1.21

On Wednesday, January 23, 2019 6:54:11 PM CET Christian Lamparter wrote: > On Wednesday, January 23, 2019 2:26:20 PM CET Koen Vandeputte wrote: > > Hi Christian, > > > > fwiw, I've been using every musl git bump up to this release on my > > devices offshore. It

Re: [OpenWrt-Devel] [PATCH] treewide: dts: Unify naming of gpio-keys nodes

Hello, I've just pushed the remaining patches. Except for lantiq. But these are moving along in Mathias Kresin' staging tree: Thanks, Christian _

[OpenWrt-Devel] [PATCH] include: add KERNEL_ENTRY to TARGET_VARS

This will allow us to override the variable from within a Device template. Signed-off-by: Christian Lamparter --- include/image.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/image.mk b/include/image.mk index 4851a71bcd..aea27c0458 100644 --- a/include

Re: [OpenWrt-Devel] Importing DTS Files from Future Kernel -- Best Practice?

On Thursday, February 7, 2019 6:15:13 PM CET Jeff Kletsky wrote: > I'm working on a derivative of the qcom-ipq4019-ap.dk07.1-c1 that > is present in Kernel 4.19, but not in 4.14 > > In the interest of "correctness" and future maintainability, > I'd like to import from Kernel 4.19 linux/arch/arm/bo

Re: [OpenWrt-Devel] [PATCH 2/2] gemini: Name binary "bootpart.tar.gz"

these does not currently include a .tar.gz version of the root filesystem which is necessary for the DNS-313." and as a bonus the squashfs image should work as it is supposed to. But of course, this needs some testing + fixing. Cheers, Christian --- From 0afe6df0ef4a81e19b73dc2e6a297701bbf155

Re: [OpenWrt-Devel] [PATCH] ramips: Increase GB-PC2 SPI speed to 50MHz

On Friday, February 1, 2019 8:36:13 AM CET Rosen Penev wrote: > The flash chip on the board (Spansion S25FL256SAIF00) is rated to support > at least 50MHz according to the datasheet. > > From testing this, that seems correct. > > time dd if=/dev/mtdblock3 of=/dev/null bs=64k from > > 41.78s to 1

Re: [OpenWrt-Devel] [PATCH 3/3] ipq40xx: add support for FritzBox 7530

Comments inline. On Sunday, February 10, 2019 2:34:30 PM CET David Bauer wrote: > Hardware > > CPU: Qualcomm IPQ4019 > RAM: 256M > FLASH: 128M NAND > ETH: QCA8075 > VDSL: Intel/Lantiq VRX518 PCIe attached >currently not supported Does the pcie device show up during boot wh

Re: [OpenWrt-Devel] [PATCH v2] ipq40xx: add support for ASUS Lyra

On Tuesday, February 12, 2019 5:19:51 PM CET Marius Genheimer wrote: > SoC: Qualcomm IPQ4019 (Dakota) 717 MHz, 4 cores > RAM: 256 MiB (Nanya NT5CC128M16IP-DI) > FLASH: 128 MiB (Macronix NAND) > WiFi0: Qualcomm IPQ4019 b/g/n 2x2 > WiFi1: Qualcomm IPQ4019 a/n/ac 2x2 > WiFi2: Qualcomm Atheros QCA9

Re: [OpenWrt-Devel] [PATCH 3/3] ipq40xx: add support for FritzBox 7530

On Tuesday, February 12, 2019 8:55:37 PM CET David Bauer wrote: > Hi Christian, > On 11.02.19 23:15, Christian Lamparter wrote: > > Comments inline. > > > > On Sunday, February 10, 2019 2:34:30 PM CET David Bauer wrote: > >> Hardware > >> >

Re: [OpenWrt-Devel] 5GHz wifi is broken

Hello, On Thursday, February 14, 2019 6:43:26 PM CET e9hack wrote: > a change somewhere between 8.Feb and 10.Feb breaks the usage of the 5GHz WiFi > on my Archer C7 router. > I get the following entries in the log file: > > Firmware is: > ath10k_pci :00:00.0: firmware ver 10.1-ct-8x-__fW-022

Re: [OpenWrt-Devel] [PATCH 2/2] gemini: Generate harddisk image for DNS-313

operly > built. > > Tested on the D-Link DNS-313. > > Signed-off-by: Christian Lamparter > [Fixing and tricksing] > Signed-off-by: Linus Walleij > --- > config/Config-images.in | 2 +- > target/linux/gemini/Makefile

Re: [OpenWrt-Devel] [PATCH] openssl: backport devcrypto changes from master

On Monday, February 18, 2019 9:57:51 PM CET Rosen Penev wrote: > From: Eneas U de Queiroz via openwrt-devel > > The sender domain has a DMARC Reject/Quarantine policy which disallows > sending mailing list messages using the original "From" header. > > To mitigate this problem, the original mess

Re: [OpenWrt-Devel] [PATCH v2 3/3] ipq40xx: add support for FritzBox 7530

On Monday, February 18, 2019 11:58:34 PM CET David Bauer wrote: > diff --git > a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts > > b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts > new file mode 100644 > index 00..b2a3

Re: [OpenWrt-Devel] [PATCH] ath79: fix wmac memory region for qca953x

On Tuesday, February 19, 2019 7:27:08 AM CET Chuanhong Guo wrote: > According to /arch/mips/include/asm/mach-ath79/ar71xx_regs.h > the size of wmac register range for qca953x is only 0x2. > > Signed-off-by: Chuanhong Guo > --- > target/linux/ath79/dts/qca953x.dtsi | 2 +- > 1 file changed, 1

Re: [OpenWrt-Devel] speed up ath10k-caldata extraction for non-ipq40xx

Hello, On Wednesday, February 20, 2019 7:26:55 PM CET Adrian Schmutzler wrote: > just saw the commit “ipq40xx: speed up ath10k-caldata extraction”: > > https://github.com/openwrt/openwrt/commit/a69e101ed1169f562fc030a783cd997d3f066b16 > > Is this specific to ipq40xx for some reason not obvious t

Re: [OpenWrt-Devel] [PATCH v2 0/3] Speed up caldata/eeprom handling for ar71xx/ath79

Hello, On Friday, February 22, 2019 7:52:37 PM CET Dmitry Tunin wrote: > пт, 22 февр. 2019 г. в 21:48, Adrian Schmutzler > : > > > > Based on the ipq40xx commit from chunkeey, I tried to do the same for > > ar71xx/ath79. > > > I want to add that without this patch firmware extraction is not fast

Re: [OpenWrt-Devel] [PATCH] ath79: speed up ath9k-eeprom extraction

On Friday, February 22, 2019 3:32:03 PM CET Dmitry Tunin wrote: > пт, 22 февр. 2019 г. в 16:57, Petr Štetiar : > > > > Dmitry Tunin [2019-02-22 16:13:52]: > > > > > What do you mean by "generalize"? Fix it on all platforms, or having > > > common 10-ath9k-eeprom, 11-ath10k-caldata, etc files., or

Re: [OpenWrt-Devel] [PATCH v2 3/3] ipq40xx: add support for FritzBox 7530

On Wednesday, February 20, 2019 6:02:21 PM CET Christian Lamparter wrote: > On Monday, February 18, 2019 11:58:34 PM CET David Bauer wrote: > > diff --git > > a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts > > > > b/target/linux/

Re: [OpenWrt-Devel] [RFC] [PULL REQUEST] rt2x00 patches from OpenWrt.org

On Friday, January 13, 2017 4:46:30 PM CET Daniel Golle wrote: > On Fri, Jan 13, 2017 at 12:46:56PM +0200, Kalle Valo wrote: > > Daniel Golle writes: > > > ... > > > Please review and comment, so we can get those patches merged! > > > > No pull requests, please. Instead send these as patches, eas

Re: [OpenWrt-Devel] [PATCH 2/3] ipq-wifi: select board-2.bin at runtime

On Thursday, January 11, 2018 7:44:33 AM CET Mathias Kresin wrote: > 11.01.2018 07:23, Mathias Kresin: > > 10.01.2018 11:15, Thomas Hebb: > >> Currently, we solve the problem of different IPQ4019 boards needing > >> different sets of Wi-Fi calibration data (board-2.bin) by using an > >> ipq-wifi-*

[OpenWrt-Devel] [PATCH] build: revert "make image target wait for initramfs"

This reverts commit 43be5087a915727e7dcb3459e2221f094c70811b. The change is incompatible with the image builder code. Luckily the RT-AC58U is no longer depending on the initramfs being available for the target's image generation rules. Reported-by: Venitex Aveon Signed-off-by: Chri

[OpenWrt-Devel] [PATCH] apm821xx: switch MR24's initramfs to multi-image method

ens Signed-off-by: Christian Lamparter Signed-off-by: Chris Blake --- target/linux/apm821xx/image/Makefile | 10 +++--- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile index 82a857a4d0..4e6b6e4995 100644

Re: [OpenWrt-Devel] [PATCH] apm821xx: switch MR24's initramfs to multi-image method

On Dienstag, 20. März 2018 23:19:06 CET Hauke Mehrtens wrote: > On 03/18/2018 10:51 PM, Christian Lamparter wrote: > > The recent change to switch to gcc 7.3 broke the image > > generation code, as the kernel would no longer fit into > > KERNEL_SIZE. > > > &

[OpenWrt-Devel] [PATCH] apm821xx: increase WNDR4700's dtb+kernel partition to 3.5 MiB

openwrt-apm821xx-nand-netgear_wndr4700-squashfs-factory.img Cc: Hauke Mehrtens Signed-off-by: Christian Lamparter --- target/linux/apm821xx/dts/netgear-wndr4700.dts | 38 ++ target/linux/apm821xx/image/Makefile | 18 2 files changed, 33 insertions(

[OpenWrt-Devel] [PATCH] brcm2708: add squashfs rootfs image

Golle Signed-off-by: Christian Lamparter --- Hello Álvaro, The squashfs image was requested by Paul: <https://github.com/aparcar/attendedsysupgrade-server/issues/88#issuecomment-365036459> I'm not sure why, but he hardcoded his tool to only work with "squashfs". &

Re: [OpenWrt-Devel] [PATCH] brcm2708: add squashfs rootfs image

On Dienstag, 24. April 2018 13:29:17 CEST Stijn Tintel wrote: > On 27-03-18 20:42, Christian Lamparter wrote: > > This patch adds a image with squashfs as the root filesystem. > > A rootfs_data partition will be generated on the first boot > > and placed inside the rootfs part

Re: [OpenWrt-Devel] [PATCH] brcm2708: add squashfs rootfs image

On Dienstag, 24. April 2018 19:56:38 CEST Stijn Tintel wrote: > On 24-04-18 19:17, Stijn Tintel wrote: > > On 24-04-18 17:59, Christian Lamparter wrote: > >> On Dienstag, 24. April 2018 13:29:17 CEST Stijn Tintel wrote: > >>> On 27-03-18 20:42, Christian Lamparter w

[OpenWrt-Devel] [RFT] musl: 1.1.20 prelease testing in OpenWrt

468e44697019ceda6 "fix out-of-tree build of crt files with stack protector enabled" so please test. Signed-off-by: Christian Lamparter --- toolchain/musl/common.mk | 4 +- .../patches/200-add_libssp_nonshared.patch| 50 --- toolchain/musl/patches

[OpenWrt-Devel] [PATCH 1/2] apm821xx: don't select swconfig for the MR24

Signed-off-by: Christian Lamparter --- target/linux/apm821xx/image/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile index 094c9e47de..1e94a40918 100644 --- a/target/linux/apm821xx/image

[OpenWrt-Devel] [PATCH 2/2] apm821xx: backport and reassign crypto4xx patches

been reassigned to fit into the series. Signed-off-by: Christian Lamparter --- ...shuffle-iomap-in-front-of-request_i.patch} | 0 ...-crypto4xx-support-Revision-B-parts.patch} | 0 ...o-crypto4xx-fix-missing-irq-devname.patch} | 0 ...4-crypto-crypto4xx-kill-MODULE_NAME.patch} | 0 ...pe

Re: [OpenWrt-Devel] ipq40xx cpu frequency

Hello, On Friday, May 4, 2018 4:12:16 PM CEST Roman Yeryomin wrote: > I'm seeing this > > [1.275858] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: > 632000 KHz > [1.276620] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency > changed to: 716000 KHz Sorry, but I'm havi

Re: [OpenWrt-Devel] LEDE 17.01.5 release planning

On Thursday, May 24, 2018 9:06:55 PM CEST Hauke Mehrtens wrote: > We would like to create a lede 17.01.5 release soon, the last release, > lede 17.01.4, was done on 18. October 2017 which was a long time ago. > We are planning to do the build by end of next week, around 2. June 2018. > > This rele

[OpenWrt-Devel] [PATCH 4/4] ipq40xx: flesh out MR33's pcie dts definitions

Signed-off-by: Christian Lamparter --- .../arch/arm/boot/dts/qcom-ipq4029-mr33.dts | 13 + 1 file changed, 13 insertions(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029

[OpenWrt-Devel] [PATCH 2/4] ipq40xx: fix dtc warning about /soc/ad-hoc-bus missing a unit name

This patch fixes a dtc warning that shows up for every device Warning (unit_address_vs_reg): Node /soc/ad-hoc-bus has a reg or ranges property, but no unit name Signed-off-by: Christian Lamparter --- .../ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 2 +- 1 file changed, 1

[OpenWrt-Devel] [PATCH 1/4] ipq40xx: set #size-cells to 0 to fix warning

er Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boo

[OpenWrt-Devel] [PATCH 3/4] ipq40xx: fix OpenMesh A62 dtc warnings

iled prerequisite 'pci_bridge' Cc: Sven Eckelmann Signed-off-by: Christian Lamparter --- .../arch/arm/boot/dts/qcom-ipq4019-a62.dts | 14 ++ 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a

Re: [OpenWrt-Devel] [PATCH] ramips: mt7621: Fix some cosmetic DTC warnings

On Thursday, June 7, 2018 7:31:23 PM CEST Rosen Penev wrote: > device_type = "pci"; hm, just a heads-up: "device_type" have been mostly deprecated [0]. |The device_type property was used in IEEE 1275 to describe the device’s |FCode programming model. Because |spec| does no

[OpenWrt-Devel] [PATCH] mtd-utils: revert faulty upstream patch for now

-list thread: <http://lists.infradead.org/pipermail/linux-mtd/2018-June/081562.html> Cc: John Crispin Reported-by: L. Wayne Leach Signed-off-by: Christian Lamparter --- Affects OpenWrt 18.06 as well. so please backport this patch. Forum thread: https://forum.lede-project.org/t/merak

Re: [OpenWrt-Devel] MR24 sysupgrade seems to be broken

On Saturday, June 30, 2018 10:06:21 AM CEST Russell Senior wrote: > I just tried updating a Meraki MR24 to current master, from an image a few > months old and it broke. I get a new kernel, but an old rootfs. I have > some of these deployed where a serial connection is awkward. It would be > nic

Re: [OpenWrt-Devel] MR24 sysupgrade seems to be broken

On Sunday, July 1, 2018 2:26:35 AM CEST Russell Senior wrote: > Here is what shows during sysupgrade: > > https://pastebin.com/YfbQZ5fB > Have you tried the aforementioned fix for the buggy mtd-utils on your old/existing installation or not? > On Sat, Jun 30, 2018 at 6:49 AM, Chri

[OpenWrt-Devel] [PATCH 2/2] apm821xx: attempt to fix sata access freezes

/forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/46> Signed-off-by: Christian Lamparter --- Awaiting confirmation from the original reporters. But if this turns out to fix the issue, I'll do a separate patch for 18.06 and lede-17.01. --- ...-dw-dma-hprot-fi

[OpenWrt-Devel] [PATCH 1/2][master+18.06] apm821xx: fix usb-otg on 4.14

Starting with 4.14, the "amcc,dwc-otg" needs to be used in order to get the usb-otg to work. Signed-off-by: Christian Lamparter --- Please add this patch to the current openwrt-18.06 branch. --- target/linux/apm821xx/dts/apm82181.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletio

[OpenWrt-Devel] [PATCH][for openwrt-18.06] apm821xx: fix sata access freezes

rule out |any caching, I'm still seeing the same great performance. OpenWrt is |now completely on par with the original MBL firmware's performance. Signed-off-by: Christian Lamparter --- ...-dw-dma-hprot-fix-and-equal-priortiy.patch | 25 +++ 1 file changed, 25 insertions(

[OpenWrt-Devel] [PATCH][for lede-17.01] apm821xx: fix sata access freezes

rule out |any caching, I'm still seeing the same great performance. OpenWrt is |now completely on par with the original MBL firmware's performance. Signed-off-by: Christian Lamparter --- Same patch content as commit "apm821xx: attempt to fix sata access freezes". c3f9a1ac0e7ae536

[OpenWrt-Devel] [PATCH][for master] apm821xx: unify My Book Live Single + Duo images

a MBL Single. I wonder if the two firmwares could even be unified." <https://forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/9> Signed-off-by: Christian Lamparter --- target/linux/apm821xx/dts/apollo3g.dtsi | 189 -- .../linux/apm821xx/dts/wd-mybookliv

[OpenWrt-Devel] [PATCH 1/5] ipq-wifi: add a note / reminder about upstreaming new board files

|Please send a mail with your device-specific board files upstream. |You can find instructions and examples on the linux-wireless wiki: |<https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles> Signed-off-by: Christian Lamparter --- package/firmware/ipq-wifi/Makefile | 3

[OpenWrt-Devel] [PATCH 4/5] apm821xx: split MBL's rootfs.img.gz into a sysupgrade and factory image

uilt-v18-06-0-rc2-image-for-rpi> The MBL's rootfs.img.gz image is generated in much the same way. Hence this patch preemptively splits the rootfs.img.gz image into a sysupgrade and a factory image. Signed-off-by: Christian Lamparter --- target/linux/apm821xx/image/Makefile | 5 +++-- 1 f

[OpenWrt-Devel] [PATCH 2/5] brcm2708: split sdcard.img.gz into a sysupgrade and factory image

t fail for no reason. Cc: John Crispin Signed-off-by: Christian Lamparter --- target/linux/brcm2708/image/Makefile | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/linux/brcm2708/image/Makefile b/target/linux/brcm2708/image/Makefile index 80a019270d..aedea94451 100644 --

[OpenWrt-Devel] [PATCH 3/5] apm821xx: build squashfs-rootfs images for the MBL

nto the image. Otherwise the new -squashfs image will only boot from the ram-overlay. Note: All overlay data (configurations/all installed packages/...) will be placed in inside the rootfs partition (i.e. /dev/sda2) just after the squashfs image. Signed-off-by: Christian Lamparter --- target/li

[OpenWrt-Devel] [PATCH 5/5] apm821xx: clean up gpio-hogs

convert the usb and both sata port power related gpio-hogs to what they really are: fixed-regulators. The ethernet phy-reset gpio-hog is replaced by a proper upstream (4.15+) reset-gpios property in the mdio-node. So this will work eventually. Signed-off-by: Christian Lamparter --- target

[OpenWrt-Devel] [RFC/RFT] musl: 1.1.20 prelease testing

big5-hkscs characters 5c8e692 inet_ntop: do not compress single zeros in IPv6 8b8fb7f correctly handle non-matching symbols in dladdr 9cad27a fix writes outside buffer by ungetc after setvbuf b3fa0f2 fix regression in alignment of dirent structs produced by readdir" Signed-off-by: Christian Lamp

[OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0

the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter --- Any comment

Re: [OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0

On Saturday, January 17, 2015 07:48:24 AM John Crispin wrote: > On 15/01/2015 22:47, Christian Lamparter wrote: > > This adds support for a rt5350-based "portable nas" solution > > from Intenso. The board comes with 32M RAM and 8M Flash, the > > built-in HDD is co

Re: [OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0

On Saturday, January 17, 2015 03:09:24 PM John Crispin wrote: > > On 17/01/2015 14:49, Christian Lamparter wrote: > > On Saturday, January 17, 2015 07:48:24 AM John Crispin wrote: > >> On 15/01/2015 22:47, Christian Lamparter wrote: > > my question is: should I rename

<    1   2   3   4   5   >