Hello,
On Thursday, October 25, 2018 11:08:02 PM CEST gree...@candelatech.com wrote:
> From: Ben Greear <gree...@candelatech.com>
>
> Reloading the driver causes the phyX to change, and that caused
> the MAC address to change. Instead, match on pci-bus which should
> be immutable.
>
> Signed-off-by: Ben Greear <gree...@candelatech.com>
Mathias Kresin developped a shell function which can just patch the MACs
into the binary pre-cal files. And it should give you the same result.
I don't have a R7800, so I just copied and pasted the functions from
the ipq40xx target and added the R7800 (along with the D7800 and
R7500v2) as an example. It's all untested. It looks like all other
IPQ806x devices could be converted in a similar fashion.
---
diff --git
a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index fa49c250f0..c0e4d940f9 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,5 +1,21 @@
#!/bin/sh
+# xor multiple hex values of the same length
+xor() {
+ local val
+ local ret="0x$1"
+ local retlen=${#1}
+
+ shift
+ while [ -n "$1" ]; do
+ val="0x$1"
+ ret=$((ret ^ val))
+ shift
+ done
+
+ printf "%0${retlen}x" "$ret"
+}
+
ath10kcal_die() {
echo "ath10cal: " "$*"
exit 1
@@ -36,6 +52,29 @@ ath10kcal_patch_mac() {
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1
seek=6 count=6
}
+ath10kcal_patch_mac_crc() {
+ local mac=$1
+ local mac_offset=6
+ local chksum_offset=2
+ local xor_mac
+ local xor_fw_mac
+ local xor_fw_chksum
+
+ xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"'
/lib/firmware/$FIRMWARE)
+ xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
+
+ ath10kcal_patch_mac "$mac" && {
+ xor_mac=${mac//:/}
+ xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
+
+ xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1
"%02x"' /lib/firmware/$FIRMWARE)
+ xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
+
+ printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
+ dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1
seek=$chksum_offset count=2
+ }
+}
+
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions.sh
@@ -55,6 +94,7 @@ case "$FIRMWARE" in
netgear,r7500v2 |\
netgear,r7800)
ath10kcal_extract "art" 4096 12064
+ ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art
6) +1)
;;
tplink,c2600)
ath10kcal_extract "radio" 4096 12064
@@ -79,6 +119,7 @@ case "$FIRMWARE" in
netgear,r7500v2 |\
netgear,r7800)
ath10kcal_extract "art" 20480 12064
+ ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art
6) +2)
;;
tplink,c2600)
ath10kcal_extract "radio" 20480 12064
diff --git
a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index afa425f075..5e5dd84729 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -18,11 +18,6 @@ case "$board" in
nec,wg2600hp)
echo $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 12) $((1 -
$PHYNBR)) ) > /sys${DEVPATH}/macaddress
;;
- netgear,d7800 |\
- netgear,r7500v2 |\
- netgear,r7800)
- echo $(macaddr_add $(mtd_get_mac_binary art 6) $(($PHYNBR +
1)) ) > /sys${DEVPATH}/macaddress
- ;;
tplink,c2600)
echo $(macaddr_add $(mtd_get_mac_binary default-mac 8)
$(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
;;
---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
