Am 24.01.2016 um 20:47 schrieb André Valentin:
> There are cases where you need a different MAC on a VLAN interface, i.e. if
> if have move than one connection to a switch. A later change of the MAC
> is not possible on VLAN interfaces, so it has to be done on creation.
> The new macaddr option all
Am 24.01.2016 um 21:34 schrieb Gio:
> On Sunday 24 January 2016 20:47:26 André Valentin wrote:
>> There are cases where you need a different MAC on a VLAN interface, i.e. if
>> if have move than one connection to a switch. A later change of the MAC
>> is not possible on VLAN interfaces, so it has t
Am 24.01.2016 um 22:00 schrieb Andre Valentin:
> Am 24.01.2016 um 21:34 schrieb Gio:
>> On Sunday 24 January 2016 20:47:26 André Valentin wrote:
>>> There are cases where you need a different MAC on a VLAN interface, i.e. if
>>> if have move than one connection to a sw
Hi Felix,
thanks for taking a look. I had the problem that without this selection the
iproute2 "ip route" does not support the new route "encap" parameter. It seems
to detect the support in the kernel. Same is with GRE, also available for
LWTUNNEL,
but it is now missing in iproute2. GRE is build
Hi!
I've got some problems with new 4.4 kernel on ar711 with my WZR-HP-AG300H.
Please just take this as a notice, I know it's testing ;-)
If you need more testing, I'm available.
André
Here's the log:
console=ttyS0,115200 root=31:03 rootfstype=jffs2 init=/sbin/init
mtdparts=ar7100-nor0:256k(u-
Hi!
This module add 4526 Bytes uncompressed.
André
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Hi!
Am 30.01.2016 um 23:20 schrieb Felix Fietkau:
> On 2016-01-30 23:14, André Valentin wrote:
>> Add needed modules for MPLS support.
>>
>> Signed-off-by: André Valentin
>> ---
>> package/kernel/linux/modules/netsupport.mk | 23 +++
>> 1 file changed, 23 insertions(+)
>>
>>
Hi!
Am 31.01.2016 um 00:42 schrieb Andre Valentin:
> Hi Felix,
>
> thanks for taking a look. I had the problem that without this selection the
> iproute2 "ip route" does not support the new route "encap" parameter. It seems
> to detect the support in the kerne
Hi Felix,
Am 29.01.2016 um 13:33 schrieb Felix Fietkau:
> On 2016-01-29 13:15, André Valentin wrote:
>> Hi Felix,
>>
>> thanks for the hint. Did you configure the MAC in the interface section?
>> I suggest I had a wrongly created MAC on my first tries which resulted in
>> kernel not accepting it.
Hi!
Am 12.02.2016 um 09:27 schrieb John Crispin:
> Hi,
>
>
>
> On 30/01/2016 23:15, André Valentin wrote:
>> This dependency is needed to be able to create ipsec xfrm states.
>>
>> Signed-off-by: André Valentin
>> ---
>> package/kernel/linux/modules/netsupport.mk | 2 +-
>> 1 file changed, 1 i
Hi!
the new strongswan release 5.8.0 supports these xfrm interfaces.
Kind regards,
André
Am 06.06.19 um 15:50 schrieb André Valentin:
> This adds support for xfrm interfaces. These interfaces are used as tunnel
> interfaces for IPsec allowing route-based tunnels.
> Compared to vti, xfrm interfa
Hello Hans!
Am 06.06.19 um 22:40 schrieb Hans Dedecker:
> Hi,
>
> Comments inline
Thanks for your hints. I will provide an updates version.
André
smime.p7s
Description: S/MIME Cryptographic Signature
___
openwrt-devel mailing list
openwrt-devel@list
++ b/package/network/config/xfrm/Makefile
>> @@ -0,0 +1,38 @@
>> +
>> +include $(TOPDIR)/rules.mk
>> +
>> +PKG_NAME:=xfrm
>> +PKG_VERSION:=1
>> +PKG_RELEASE:=1
>> +PKG_LICENSE:=GPL-2.0
>> +
>> +include $(INCLUDE_DIR)/package.mk
>> +
>> +def
a/package/network/config/xfrm/Makefile
>> b/package/network/config/xfrm/Makefile
>> new file mode 100644
>> index 00..efc90cf318
>> --- /dev/null
>> +++ b/package/network/config/xfrm/Makefile
>> @@ -0,0 +1,38 @@
>> +
>> +include $(TOPDIR)/rul
Hi Hans!!
Am 11.06.19 um 22:16 schrieb Hans Dedecker:
> Hi,
>
> On Mon, Jun 10, 2019 at 8:10 PM Andre Valentin wrote:
>>
>> Hi Hans,
>>
>> after testing xfrm tunnels a bit I found to big differences compared to
>> other convential tunnels.
>> 1) x
Hi!
On 13.06.19 08:44, Hans Dedecker wrote:
Hi,
On Wed, Jun 12, 2019 at 8:28 PM Andre Valentin wrote:
Hi Hans!!
Am 11.06.19 um 22:16 schrieb Hans Dedecker:
Hi,
On Mon, Jun 10, 2019 at 8:10 PM Andre Valentin wrote:
Hi Hans,
after testing xfrm tunnels a bit I found to big differences
Hi!
Am 15.06.19 um 21:35 schrieb Hans Dedecker:
> Hi,
>
> On Fri, Jun 14, 2019 at 1:10 PM André Valentin wrote:
>>
>> -switch to module autoprobe
>> -exclude 4.9 kernel
>>
>> Signed-off-by: André Valentin
>> ---
>> package/kernel/linux/modules/netsupport.mk | 4 ++--
>> 1 file changed, 2 insert
Hi!
What about setting peeraddr to 0.0.0.0 ?
Kind regards,
André
Am 22.08.19 um 09:21 schrieb pothuganti sridhar:
> Hello All,
>
> I am trying to implement DMVPN with OpenWRT. That requires multipoint GRE
> tunnels. In case of the multipoint GRE tunnel, the remote endpoint/peer
> address wil
Hi!
this should also be in your .config
# CONFIG_ATH_USER_REGD is not set
See http://wireless.kernel.org/en/users/Drivers/ath10k -> Limitations 3/3
Kind regards,
André
On 04.07.2014 16:29, Jacek Kikiewicz wrote:
Hello,
I have CONFIG_PACKAGE_ATH_DFS=y and still cannot use this... any idea h
Hi!
I also noticed after upgrading that routers with jffs2 in ubi (rootfs_data) are
not
supported anymore. The jffs2 is not mounted after an upgrade,
resulting in loss of configuration. I had to clear rootfs_data
to be able to mount it again as ubifs. That's okay if you know it!
I noticed a sec
On 09.07.2014 09:48, John Crispin wrote:
i think using squash+ubifs is a better option as we dont need to use
the gluebi layer anymore. this makes the whole setup a lot nice i
think. that is why jffs2 support for nand is gone. however i am open
to hear use cases for why jffs2 support should be ad
Hi Felix!
I saw that you upgraded ar71xx to 3.14. I tested it immediateley, of course. It
seems there is a problem with ubi. Please take a look at this:
[0.00] Linux version 3.14.16 (avalentin@varus) (gcc version 4.8.3
(OpenWrt/Linaro GCC 4.8-2014.04 r42002) ) #1 Fri Aug 8 11:52:10 CES
Hi Daniel!
Please take a look at this (old kernel 3.10)
[3.42] UBI: attaching mtd8 to ubi0
[3.57] UBI: EOF marker found, PEBs from 105 will be erased
[3.58] UBI: scanning is finished
[3.61] UBI: attached mtd8 (name "ubiroot", size 249 MiB) to ubi0
[3.61] UB
oblem you observe.
How excactly did you flash the image to the device?
Cheers
Daniel
On Sat, Aug 09, 2014 at 08:54:42PM +0200, Andre Valentin wrote:
Hi Daniel!
Please take a look at this (old kernel 3.10)
[3.42] UBI: attaching mtd8 to ubi0
[3.57] UBI: EOF marker found, PEBs fro
Hi!
Thank you very much for this great work!
André
Mit freundlichen Grüßen
André Valentin
Systemadministrator
--
Internet * Netzwerk * Mobile Daten
Citrix Silver Solution Advisor
Ausserhalb unserer Geschäftszeiten (Montag bis Freitag von 8:30 Uhr bis
17:30 Uhr, ausgenommen gesetzliche Feiert
Hi!
Since 3.10.58 I notice reboots of the system. I logged the oopses, but cannot
see a source. Please take a look if you have an idea what the heck this causes:
---
[ 57.66] icmp6_send: no reply to icmp error
[ 57.66] icmp6_send
Hi!
Thanks for the hint. I could now isoliate it to this bug:
https://dev.openwrt.org/ticket/18325
Kind regards,
André
On 25.11.2014 16:23, John Crispin wrote:
> build an image with KALLSYMS please and send a new log
Mit freundlichen Grüßen
André Valentin
Systemadministrator
--
Internet * N
Hi!
thanks for your offer. Please wait a week for me the test it, just to proove
it. I will post here and in the ticket.
Kind regards,
André
On 27.11.2014 08:28, John Crispin wrote:
> Hi,
>
> do we need only this ->
> http://patchwork.ozlabs.org/patch/349076/
>
> or all 6 from the series ?
>
4> 98440003 7c84d800 1085
8c640040
info dnsmasq[960[ 1843.24] ---[ end trace 5ca961b41da45ecb ]---
7]: forwarded www.heise.de to 20[ 1843.25] Kernel panic - not syncing:
Fatal exception in interrupt
Kind regards,
Andre
On 27.11.2014 08:57, Andre Valentin wrote:
> Hi
Hi!
If I enable this patch/module, I get strange errors with my OpenWRT based IPsec
router. Packets are accepted and then lost, and not encrypted. Only the first
comes through, especially if stateless
protocolls (udp, icmp) are used.
This system used multiple routing tables and rules generated
Hi!
I just recompiled the module and loaded it on the router. But it seems that
this does not fix the error. 5 minutes later I got several alerts (ping checks).
Kind regards,
André
On 20.12.2014 00:56, Florian Westphal wrote:
> Andre Valentin wrote:
>> If I enable this patch/modu
On 29.12.2014 01:44, André Valentin wrote:
> target/linux/ar71xx/Makefile |2 +-
Please don't take this change serious. It's just meant as a starting point for
the brave ;-)
Kind regards,
André
Mit freundlichen Grüßen
André Valentin
Systemadministrator
--
MarcanT Gm
Hi!
It seems the kernel bump broke ath79 compilation. The problem lies in
target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch
It cannot be applied anymore. I tried a quick fix, but there seems to be a
bigger change.
Kind regards,
André
smime.p7s
Description: S/MIME Cryptogr
Hi!
Im using file extension to get extra status from my device. But after the
change above, the calls over uhttpd are rejected with permission denied.
Currently I have this ACL:
# cat /usr/share/rpcd/acl.d/superuser.json
{
"superuser": {
"description": "Super user access
On 21.09.19 20:16, Andre Valentin wrote:
> Hi!
>
> Im using file extension to get extra status from my device. But after the
> change above, the calls over uhttpd are rejected with permission denied.
I've added a grant session call over http, it works now again.
Kin
Hi Shannon,
I use a hotplug script to change the driver to raw-ip. This works fine for me.
Kind regars,
André
On 23.09.19 19:16, Shannon Barber wrote:
> I'm doing several builds and testing different devices and this issue is
> persistent on the x86_64 build for the PC Engine APU hardware.
> (
Hello,
I also did several tests on the 4.19 ipq806x (NBG6817). I noticed that VPN
throuput (IPsec Performance) dropped to 30% with exactly the same config
(kernel and openwrt), kernel crypto and arm crypto
stuff tested.
Also the whole system feels a bit slowier. Timers (clock, ddr) in dts have b
Am 15.05.21 um 12:00 schrieb Bjørn Mork:
> André Valentin writes:
>
>> This adds a new device id to the image tools.
>>
>> Signed-off-by: André Valentin
>> ---
>> tools/firmware-utils/src/zytrx.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/tools/firmware-utils/src/zytrx.c
>> b/
Hi Adrian!
Please see comments below!
Am 15.05.21 um 16:05 schrieb Adrian Schmutzler:
> Hi,
>
> comments below.
>
>> -Original Message-
>> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org]
>> On Behalf Of André Valentin
>> Sent: Samstag, 15. Mai 2021 02:12
>> To: open
Hi !
Am 15.05.21 um 18:08 schrieb Bjørn Mork:
> [ answering some comments which also apply to the NR7101 ]
>
> "Adrian Schmutzler" writes:
>
>>> + partition@14 {
>>> + label = "Kernel";
>>> + reg = <0x14 0x1ec>;
>>> + };
>>
>>
Hi!
Am 17.05.21 um 12:54 schrieb Bjørn Mork:
> Andre Valentin writes:
>
>> There are gaps between the partitions. I can only imagine that this is
>> because of bad block handling in the bootloader.
>> It seems it uses the end of the flash for reserve and also has hol
Hi!
>The NBG6716 has recently been disabled because of size problems with the
>kernel partition.
>I'm thinking about extending it to 8MB, shouldn't be a problem.
>
>But I'm afraid users will brick their device when doing a sysupgrade to the
>new flash layout.
>First time / in upgrade case it mus
Hi!
I tried this patch and at works as expected. Thank you very much!
André
Am 07.10.21 um 00:27 schrieb David Bauer:
> The existing wnm_disassoc_imminent ubus method only supports issuing a
> bss transition request with the disassoc imminent flag set.
> For use-cases, where the client is reque
Hello Stijn!
Am 21.06.22 um 15:36 schrieb Stijn Tintel:
Introduce a new option mbo to toggle Multi Band Operation aka Agile
Multiband for a BSS. As the specification requires APs to support OTA
when FT is supported, force OTA on when FT is enabled.
Signed-off-by: Stijn Tintel
---
package/ne
Hi!
I have written support for the LTE3301-Plus device for OpenWRT. But my main
problem is that
Zyxel only gave me an binary imagebuilder. If anybody is interested I can
provide the needed
OpenWRT patch and the binary. Perhaps someone is able to decompile it and back
or even
better, the format
Hi!
Currently I'm having some serious problems with the new 5.4 port.
1) PCIe
I'm developing on the ZyXEL LTE3301-PLUS. It has PCIe and a mt7615e connected
to second bus on the first phy.
If booting the device, kernel hangs with a RST message, telling the device is
not detected. It seems the PCI
Hi!
Am 07.04.20 um 16:33 schrieb Bjørn Mork:
> Andre Valentin writes:
>
>> 3) Problems with QMI Interfaces
>> QMI is used for mobile phones and interact with the qmi_wwan driver in the
>> kernel. I had transmit issues,
>> switched the driver back to the 4.14 wh
Hi!
Am 07.04.20 um 17:49 schrieb Bjørn Mork:
> Just remembered an issue on my todo list: There have been some MTU
> handling changes in the kernel networking API. This affected the
> qmi_wwan QMAP handling. I am not sure about the current status. Will
> have to dig a bit more. But this might b
Am 07.04.20 um 12:16 schrieb Chuanhong Guo:
> [CC Sergio who worked on upstream PCIE driver]
>
> On Tue, Apr 7, 2020 at 4:45 PM Andre Valentin wrote:
>>
>> Hi!
>>
>> Currently I'm having some serious problems with the new 5.4 port.
>> 1) PCIe
>>
Am 07.04.20 um 20:05 schrieb Sergio Paracuellos:
> Hi,
>
> On Tue, Apr 7, 2020 at 12:16 PM Chuanhong Guo wrote:
>>
>> [CC Sergio who worked on upstream PCIE driver]
>>
>> On Tue, Apr 7, 2020 at 4:45 PM Andre Valentin wrote:
>>>
>>> Hi!
>>
Hi Sergio!
Am 08.04.20 um 06:28 schrieb Sergio Paracuellos:
> Hi Andre,
>
> On Tue, Apr 7, 2020 at 9:28 PM Andre Valentin wrote:
>>
>> Am 07.04.20 um 20:05 schrieb Sergio Paracuellos:
>>> Hi,
>>>
>>> On Tue, Apr 7, 2020 at 12:16 PM Chuanhon
Hi Bjoern,
I made a patch for include/image-commands.mk that allows to building squashfs
initrd images.
The reason for me is that the imagebuilder is unable to generate initramfs
images.
When building the final images with the imagebuilder you can define which
packages to include.
Your platform
Wed, Apr 8, 2020 at 9:30 AM Sergio Paracuellos
>>> wrote:
>>>>
>>>> Hi André,
>>>>
>>>>
>>>> On Wed, Apr 8, 2020 at 9:13 AM Andre Valentin
>>>> wrote:
>>>>>
>>>>> Hi Sergio!
>>>>
Hi!
Am 07.04.20 um 17:49 schrieb Bjørn Mork:
> Just remembered an issue on my todo list: There have been some MTU
> handling changes in the kernel networking API. This affected the
> qmi_wwan QMAP handling. I am not sure about the current status. Will
> have to dig a bit more. But this might b
Hi Sergio,
the device has an onboard LTE modem. Tonight I noticed that the originial pci
driver
must have changed some additional GPIO pins.
After more testing, I found the GPIO and the LTE device now operates again.
But after more testing, I found out that the wifi chip does not fully
initiali
Hi Sergio
Am 10.04.20 um 13:36 schrieb Sergio Paracuellos:
>> cat /proc/interrupts new:
>>CPU0 CPU1 CPU2 CPU3
>> 8: 75188 75268 75341 75246 MIPS GIC Local 1 timer
>> 9: 24413 0 0 0 MIPS GIC 63 IPI call
>>
Hi Bjoern,
that looks very interesting. I do have the same problems here with initial
images and made special .configs for that.
Kind regards,
André
Am 22.04.20 um 22:58 schrieb Bjørn Mork:
> These patches can also be found in a branch here:
> https://github.com/bmork/openwrt/tree/image-packa
Hi Rafel,
this is really great stuff. It would help me to get forward with my wifi
controller.
Could it be possible to subsribe to multiple sources to limit the connections
to ubus?
2 SSIDs with 2.4 ad 5GHz would me 4 concurrent channels if I understand right.
Kind regards,
André
Am 31.07.20
Hi!
Am 03.08.20 um 07:49 schrieb Rafał Miłecki:
> On 31.07.2020 13:02, Andre Valentin wrote:
>> this is really great stuff. It would help me to get forward with my wifi
>> controller.
>> Could it be possible to subsribe to multiple sources to limit the
>> connectio
Hi!
I've enabled support for the odoid HC1 in the samsung target a month ago, it
only needs generic 5.4 kernel and is a subtarget.
https://www.hardkernel.com/shop/odroid-hc1-home-cloud-one/
Only open thing is the boodloader on the sdcard, which is a binary for
hardkernel.
If there is interest I
Hi!
Am 04.08.20 um 22:14 schrieb Adrian Schmutzler:
>> -Original Message-
>> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org]
>> On Behalf Of Andre Valentin
>> Sent: Dienstag, 4. August 2020 17:48
>> To: openwrt-devel@lists.openwrt.or
Hi!
Am 04.08.20 um 18:40 schrieb Rafał Miłecki:
> On 04.08.2020 09:43, Andre Valentin wrote:
>> Am 03.08.20 um 07:49 schrieb Rafał Miłecki:
>>> On 31.07.2020 13:02, Andre Valentin wrote:
>>>> this is really great stuff. It would help me to get forward with my wifi
Hi Jaap,
Am 06.08.20 um 13:43 schrieb Jaap Buurman:
> Dear all,
>
> I have noticed the flow control work for mt7621 in the following
> Openwrt patch:
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=c8f8e59816eca49d776562d2d302bf990a87faf0
>
> However, the problem that the patch is
;switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '0 1 2 3 6t'
Sorry for the noise.
I could now check one of the bricked devices and found no
Hello!
Could someone please take care of this little snippet?
Kind regards,
André
Am 09.09.20 um 22:00 schrieb André Valentin:
> Activation of autoscanning enables a a wifi client to select the best
> accesspoint based on rssi.
>
> This feature is useful in case you have multiple access points
Hi Rafał!
I'm experimenting again a bit with the new API. I subscribed to the hostapd
events and saw that
after some time the connection is still up, but now new events come in.
How can I control timeout and make sure, that the subscription connections
stays as long as
possible online?
Kind reg
Hi Rafał!
Am 23.09.20 um 23:37 schrieb Rafał Miłecki:
> On 2020-09-23 23:33, Andre Valentin wrote:
>> I'm experimenting again a bit with the new API. I subscribed to the
>> hostapd events and saw that
>> after some time the connection is still up, but now new events com
Hi Daniel!
Am 07.10.20 um 02:24 schrieb Daniel Golle:
> Hi Andre,
>
> On Wed, Sep 16, 2020 at 08:41:03PM +0200, Andre Valentin wrote:
>> Hello!
>>
>> Could someone please take care of this little snippet?
>
> Apart from this no longer applying due to other chan
Hi Lika,
after compiling it with symbols enabled it looks even worse:
Starting kernel ...
[0.00] Linux version 3.6.6 (avalentin@varus) (gcc version 4.6.4
20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #1 Fri Nov 9 20:54:50
CET 2012
[0.00] SoC: AR9 rev 1.2
[0.00] bootcon
Hi John,
I'm working with your new lantiq support and I have some problems.
First is that I get really bad performance on tun/tap devices with
openvpn. Minimal traffic through the devices is no problem, but if I
push a kernel over the line, I get response times in 40s range. There's
no load on the
Hi Álvaro,
I get the following errors when I try to apply:
patching file
target/linux/lantiq/patches-3.7/0122-MIPS-lantiq-adds-pcie-driver.patch
Hunk #8 FAILED at 248.
Hunk #9 FAILED at 1861.
Hunk #10 FAILED at 2002.
Hunk #12 FAILED at 2693.
Hunk #13 FAILED at 3177.
5 out of 21 hunks FAILED --
Hello!
I saw that there is support for the Netgear R6250 in openwrt. So I thought
maybe the R7000 is not so far from being support. It's not ;-)
After I modified the R6250 config in openwrt to allow the initramfs image to be flashed. First problem I then saw is that the image loads fine, but on
Hi!
I thought about how I could get some kind of transaction safety. I only found
this solution:
-Look if there is enough extra space for rootfs+sysupgrade.tgz+safety
-If yes, create a temporary volume and push the image into it
-Mount it
-Copy sysupgrade.tgz to its root
-unmount it
-update kern
Hi !
On 23.05.2014 15:03, Daniel wrote:
I built a quite feature-complete and by now well-working sysupgrade for the
oxnas fork
https://www.gitorious.org/openwrt-oxnas/openwrt-oxnas/source/8d0f5e4025d5d9d2c129914b59c03d7c2cde5d93:target/linux/oxnas/base-files/lib/upgrade/platform.sh
That looks
Hi!
On 23.05.2014 15:08, John Crispin wrote:
Hi,
is this neccessary ? should a forced detach not be enough ? that is
why we added the forced detach ioctl.
could you try to use "ubi detach rootfs" instead of unmount ?
Damn, I did not notice this. I have to use a different kernel source..
Thank
Hi!
On 23.05.2014 16:12, John Crispin wrote:
ok, i will rework the series and merge the first 2 patches in the next
days.
i noticed the series passes the cmdline of sysupgrade which is a bit
ugly so i will change that to using imagename + preserve_settings or
similar
That sounds good:-) Can'
Hi !
On 23.05.2014 15:16, Felix Fietkau wrote:
- submit it as a patch to procd git instead of openwrt
- rename the command to 'exec' or something like that. It could be used
for more than just sysupgrade.
- make "arguments" a string array and maybe combine it with "command"
- maybe add an option
Hi!
you have to edit target/linux/ar71xx/Makefile and remove "broken" from one of
the first line. I recommend the squashfs image.
André
On 30.05.2014 17:17, Alejandro Mery wrote:
On 30/05/14 14:45, Alejandro Mery wrote:
On 30/05/14 14:33, Jacek Kikiewicz wrote:
select target profile zyx
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
Hi!
The NBG6716 has recently been
05 schrieb Adrian Schmutzler:
> Hi,
>
>> -Original Message-
>> From: Andre Valentin [mailto:a.valen...@ddimension.net]
>> Sent: Dienstag, 18. Mai 2021 20:11
>> To: OpenWrt Development List
>> Subject: Resize of ath79 / ZyXEL NBG6716 kernel partition
80 matches
Mail list logo
