Hi John, I'm working with your new lantiq support and I have some problems. First is that I get really bad performance on tun/tap devices with openvpn. Minimal traffic through the devices is no problem, but if I push a kernel over the line, I get response times in 40s range. There's no load on the system.. If i do not use VPN, I get normal rates. I checked everything. With the old kernel everything is as before.
Second is that netlink is somehow broken?? I get these errors: Jan 10 21:37:15 firewall daemon.info syslog: 14[KNL] received netlink error: Protocol not supported (120) Jan 10 21:37:15 firewall daemon.info syslog: 14[KNL] unable to add SAD entry with SPI c2c90d24 All corresponding modules are loaded for IPsec. Do you have an idea? André On 15.12.2012 11:56, John Crispin wrote: > Hi, > > i pushed the lantiq 3.7 kernel support last night. > > This is a rather big update as we are now running arch/lantiq/ on an > almost fully upstreamed kernel with devicetree support. > > The following boards don't have a devicetree file yet due to lack of > time / test hardware (help and hardware welcome!) > > ARV3527P GIGASX76X ARV4519PW BTHOMEHUBV2B BTHOMEHUBV3A WBMR P2601HNFX H201L > > > Changelog : > * adds devicetree support > * updated usb driver > * updated atm driver > * added ptm driver > * added deu driver (crypto engine) > * unified leds/button names and handling (WIP) > * proper amazon se support with 1 supported device (and i have 2 more on > my desk that i will port soonish) > * new uboot tree (thanks daniel) > * asterisk support for TAPI (we dropped owsip) > > Known issues : > * USB root hub registers as 1.1 (i only just noticed) > * spi fails to come up on DGN3500 > * ralink pci wifi seems broken (a802/w303V/wav218) > * svip / falcon are pending to be tested/fixed for 3.7 > * usif / spi drivers exist but need to be moved from platform to > devicetree API > * cpufreq driver exists but needs to be ported > > > I am looking for people to donate me more units ! > * anything with AR10 inside it > * my bufallo WBMR died i need a new one > * fritzboxes would be welcome (i only have the 3370 and 7320) > * speedport w723V (i believe this is VR9 based) > * ARV7519RW22 - vdsl cpe orange/spain > * there are a few huawei units with AR9/VR9 > * there are a few vdsl units from ZTE with VR9 > * i still dont have a ARV4519 (vodafone/italy?) > > Last but not least, if anyone wants to send me a xmas present, i am > looking for a sponsor for one of these toys -> > http://www.saleae.com/logic16 > > John > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
