Hi Jacek,
summarising all information from the mailinglist the following
configuration should work:
1. select CONFIG_PACKAGE_ATH_DFS=y
2. if ath9k select CONFIG_ATH_USER_REGD=y
if ath10k deactivate CONFIG_ATH_USER_REGD
3. compile current OpenWRT trunk
4. Configuration
-
config wifi-dev
On 7/8/14, 12:20 AM, Andre Valentin wrote:
> Hi!
>
> this should also be in your .config
> # CONFIG_ATH_USER_REGD is not set
> See http://wireless.kernel.org/en/users/Drivers/ath10k -> Limitations 3/3
What does it mean exactly? For ath9k the option CONFIG_PACKAGE_ATH_DFS
needs to be set.
For ath1
On 7/10/14, 9:47 AM, Matti Laakso wrote:
> Hi,
>
>> for me it seems that DFS is broken in current trunk for ath9k.
>> I use trunk and compiled ar71xx. With the following configuration on a
>> Ubiquity Nanostation locoM5
>>
>> -
>> config wifi-device 'radio0'
>> option type 'mac80211'
Hi,
> for me it seems that DFS is broken in current trunk for ath9k.
> I use trunk and compiled ar71xx. With the following configuration on a
> Ubiquity Nanostation locoM5
>
> -
> config wifi-device 'radio0'
> option type 'mac80211'
> option hwmode '11na'
> option path 'p
Hi,
for me it seems that DFS is broken in current trunk for ath9k.
I use trunk and compiled ar71xx. With the following configuration on a
Ubiquity Nanostation locoM5
-
config wifi-device 'radio0'
option type 'mac80211'
option hwmode '11na'
option path 'pci:00/0
Hi!
this should also be in your .config
# CONFIG_ATH_USER_REGD is not set
See http://wireless.kernel.org/en/users/Drivers/ath10k -> Limitations 3/3
Kind regards,
André
On 04.07.2014 16:29, Jacek Kikiewicz wrote:
Hello,
I have CONFIG_PACKAGE_ATH_DFS=y and still cannot use this... any idea h
Hello,
I have CONFIG_PACKAGE_ATH_DFS=y and still cannot use this... any idea how /
what should be debugged?
Jacek
On 03.07.2014 18:14, Martin Garbe wrote:
> The command "iw phy ..." only shows hardware capabilities. For DFS
> hardware AND software support is needed. In OpenWRT you need hostapd
On 7/3/14, 7:28 AM, Jacek Kikiewicz wrote:
> Hi,
>
> I sure selected this option, as I said command 'iw phy phy1 info' does
> in fact show DFS channels, but I just cannot set them for usage...
>
The command "iw phy ..." only shows hardware capabilities. For DFS
hardware AND software support is n
Hi,
I sure selected this option, as I said command 'iw phy phy1 info' does
in fact show DFS channels, but I just cannot set them for usage...
Jacek
On 07/02/14 22:50, Martin Garbe wrote:
On 7/1/14, 10:04 AM, Jacek Kikiewicz wrote:
Hello,
I have few APs that are using ath9k driver, I've rea
On 7/1/14, 10:04 AM, Jacek Kikiewicz wrote:
> Hello,
>
> I have few APs that are using ath9k driver, I've read that now DFS is
> supported on that driver,
> so I compiled latest revision (yesterday: 41415), and started playing,
> basically when as per
> manual / howto I run 'iw phy phy1 info' I
10 matches
Mail list logo
