Hello, I have CONFIG_PACKAGE_ATH_DFS=y and still cannot use this... any idea how / what should be debugged?
Jacek On 03.07.2014 18:14, Martin Garbe wrote: > The command "iw phy ..." only shows hardware capabilities. For DFS > hardware AND software support is needed. In OpenWRT you need hostapd to > support DFS too. The config parameter CONFIG_PACKAGE_ATH_DFS explicitely > activates DFS in hostapd. This parameter is not set by default. > For more information see also the patch with comment in git: > http://git.openwrt.org/?p=openwrt.git;a=commitdiff;h=5fd90c893f86e88150ea81be7afd337ac1b802aa > > Regards, > Martin > > >> > Jacek >> > >> > On 07/02/14 22:50, Martin Garbe wrote: >>> >> On 7/1/14, 10:04 AM, Jacek Kikiewicz wrote: >>>> >>> Hello, >>>> >>> >>>> >>> I have few APs that are using ath9k driver, I've read that now DFS is >>>> >>> supported on that driver, >>>> >>> so I compiled latest revision (yesterday: 41415), and started >>>> >>> playing, basically when as per >>>> >>> manual / howto I run 'iw phy phy1 info' I can see DFS channels, >>>> >>> exactly like in howto on a wiki, problem is however >>>> >>> that I cannot make it work on those channels (I've tried 52,56,100, >>>> >>> 104), after changing config and restarting wifi >>>> >>> I saw in dmesg 'interface wlan1 entered disabled mode) - I tried with >>>> >>> HT20 for the beginning. >>>> >>> So, question here is, should this work in current state or is there >>>> >>> still some support missing? >>>> >>> I can pull any logs / settings that are of interest. >>> >> Have you elected >>> >> CONFIG_PACKAGE_ATH_DFS=y >>> >> when compiling the driver? This way you agree to the fact that your >>> >> hardware supports DFS. After that DFS channels can be selected. >>> >> >>> >> _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
