Hi Robert,
On Fri, 9 Nov 2018 at 18:11, Robert Marko wrote:
>
> Take a look at this example.
> https://github.com/openwrt/openwrt/pull/713#issuecomment-369844218
Many Thanks, I will check this
Regards,
Clement
>
> You have to use ath10k-bdencoder
> On Fri, 9 Nov 2018 at 16:07, Clément Péron w
Take a look at this example.
https://github.com/openwrt/openwrt/pull/713#issuecomment-369844218
You have to use ath10k-bdencoder
On Fri, 9 Nov 2018 at 16:07, Clément Péron wrote:
>
> Hi Robert,
>
> Thanks for the info, I have looked at the ipq-wifi but for exemple the
> "board-zyxel_nbg6617.bin"
Hi Robert,
Thanks for the info, I have looked at the ipq-wifi but for exemple the
"board-zyxel_nbg6617.bin" and "board-zyxel_wre6606.bin" are already
combined into one board.bin. and they just replace the board-2.bin,
But how are they combined ?
I have seems some example to upstream the BDFs like
Hi,
I'm using a IPQ40xx board with kernel 4.14 (DK05 variant), I have
successfully extract the pre-cal but i'm now stuck at the board-2.bin
loading.
When booting the ath10k_pci is looking for
"bus=ahb,bmi-chip-id=0,bmi-board-id=16" and a
"bus=ahb,bmi-chip-id=0,bmi-board-id=27" however these board
