This patch adds sysupgrade and status LED support for the Aztech
HW550-3G (ramips rt305x). Some LED GPIOs were changed for clarity.
Signed-off-by: Layne Edwards
---
Index:
target/linux/ramips/files/arch/mips/ralink/rt305x/mach-hw550-3g.c
On Thu, 10 Mar 2011 21:44:24 -0500, "Layne M. Edwards"
wrote:
On Fri, 11 Mar 2011 00:09:53 +0200, Roman Yeryomin
wrote:
On 10 March 2011 19:09, Layne M. Edwards
wrote:
Also, the switch configuration (swconfig) is not working as
expected (when
using r24328). The VLANs for LAN (e
On Fri, 11 Mar 2011 00:09:53 +0200, Roman Yeryomin
wrote:
On 10 March 2011 19:09, Layne M. Edwards
wrote:
Also, the switch configuration (swconfig) is not working as expected
(when
using r24328). The VLANs for LAN (eth0.1) and WAN (eth0.2) are not
configured properly by default (i.e. WAN
On Thu, 10 Mar 2011 19:30:38 +0100, Michael Heimpold
wrote:
Hi,
I'm currently working on support for Asus RT-G32 which is also
a Ralink Rt3052 based low-cost router.
I experience the same problems: ethernet driver loads fine but
nothing works actually. This my time is currently very limited
I d
Ethernet is not working using the latest ramips_eth and ramips_esw
drivers in trunk on my Aztech HW550-3G (Ralink rt3052). The eth0
interface appears to be working fine, but there is no connectivity on
the LAN or WAN (see ifconfig below). After some searching in the forums,
I found that other rt3
On Tue, 08 Mar 2011 02:49:21 -0500, "Layne M. Edwards"
wrote:
On Tue, 08 Mar 2011 08:26:08 +0100, John Crispin
wrote:
the rt305X have a embedded switch. does your board use it or does it
connect a phy to the gbit port ? looking at the driver currently
only
esw seems supported
On Tue, 08 Mar 2011 08:26:08 +0100, John Crispin
wrote:
On 08/03/11 08:13, Layne M. Edwards wrote:
On Sun, 06 Mar 2011 19:14:19 -0500, "Layne M. Edwards"
wrote:
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not w
On Sun, 06 Mar 2011 19:14:19 -0500, "Layne M. Edwards"
wrote:
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet.
Wireless appears to work fine. USB does not work yet (as with other
Ralink boards).
Sig
This patch adds initial support for the Aztech HW550-3G (Ralink RT3052f
SoC, 8MB flash, 32MB dram). Ethernet is not working yet. Wireless
appears to work fine. USB does not work yet (as with other Ralink
boards).
Signed-off-by: Layne Edwards
---
Index: target/linux/ramips/files/arch/mips
Comment(by Simon Iremonger):
I will be very happy to try, but unfortunately I can't do anything
with my
AR7s until the weekend of 2011-03-26!
Hopefully I can manage to build it manually with the build config
copied
from the standard AR7 build, unless there are testing builds being
produ
10 matches
Mail list logo
