On Fri, 11 Mar 2011 00:09:53 +0200, Roman Yeryomin
<leroi.li...@gmail.com> wrote:
On 10 March 2011 19:09, Layne M. Edwards <ledwa...@astrumtech.net>
wrote:
Also, the switch configuration (swconfig) is not working as expected
(when
using r24328). The VLANs for LAN (eth0.1) and WAN (eth0.2) are not
configured properly by default (i.e. WAN port is on one of the LAN
ports).
Modifying the swconfig in '/etc/config/network' seems to have no
effect. Is
this a bug or has swconfig not been implemented yet for ramips?
I haven't had time to review the ramips eth/esw drivers (ramips.c,
ramips_esw.c) to identify the problem yet. I was hoping one of the
ramips
driver developers (John Crispin <blogic> and/or Gabor Juhos
<juhosg>) could
take a look at this and provide some insight. Thanks for your
contributions
to this.
There is no support for swlib in ramips_esw driver - it should be
rewritten to support it.
Thanks, that explains why swconfig doesn't work for ramips.
And this is real problem because, e.g. Belkin board I have has
external switch, and there is no other way (at least with existing
code) except modifying ramips_esw and partially braking ramips target
to make it work correctly. See my patches from this thread:
https://forum.openwrt.org/viewtopic.php?id=21998 for example.
Hopefully me or Juhos or someone else will have time to rewrite
ramips_esw to support swlib. I see no other right way to do it. But
maybe I'm blind.. :)
Is there anyone working on this? I can take a look at it if no one is
working on it.
Thanks,
Layne
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
