Buffalo LinkStation LS421DE is a dual bay NAS, based on Marvell Armada 370
Hardware:
SoC: Marvell Armada 88F6707-A1
CPU: Cortex-A9 1200 MHz, 1 core
Flash: SPI-NOR 1 MiB, NAND 512 MiB
RAM: DDR3 512 MiB
Ethernet:1x 10/100/1000 Mbps
USB: 1x
Buffalo LinkStation LS421DE is a dual bay NAS, based on Marvell Armada 370
Hardware:
SoC: Marvell Armada 88F6707-A1
CPU: Cortex-A9 1200 MHz, 1 core
Flash: SPI-NOR 1 MiB, NAND 512 MiB
RAM: DDR3 512 MiB
Ethernet:1x 10/100/1000 Mbps
USB: 1x
Buffalo LinkStation LS421DE is a dual bay NAS, based on Marvell Armada 370
Hardware:
SoC: Marvell Armada-370 88F6707-A1
CPU: Cortex-A9 1200 MHz, 1 core
Flash: SPI-NOR 1 MiB, NAND 512 MiB
RAM: DDR3 512 MiB
Ethernet:1x 10/100/1000 Mbps
USB:
Buffalo LinkStation LS421DE is a dual bay NAS, based on Marvell Armada 370
Hardware:
SoC: Marvell 88F6707-A1
CPU: Cortex-A9 1200 MHz, 1 core
Flash: SPI-NOR 1 MiB, NAND 512 MiB
RAM: DDR3 512 MiB
Ethernet:1x 10/100/1000 Mbps
USB: 1x 2.0, 1x
-off-by: Daniel Gonzalez Cabanelas
---
Changes in v2:
- Commit log: add missing SOB and a reference to kernel in commit subject
...qchip-add-support-for-bcm6345-style-periphery-irq-.patch | 6 --
...qchip-add-support-for-bcm6345-style-periphery-irq-.patch | 6 --
2 files changed, 8 i
The bcm6345-periph-intc driver only targets a single CPU at a time, even if
the notional affinity is wider. Let's inform the core code about this.
This patch gets rid of the kernel message:
"genirq: irq_chip bcm6345-periph-intc did not update eff.
affinity mask of irq 52"
---
...qchip-add-support
snapshots.
Signed-off-by: Daniel Gonzalez Cabanelas
---
Changes in v2:
- Added missing target (brcm63xx) to the subjet.
.../brcm63xx/base-files/etc/board.d/01_leds | 1 +
.../base-files/etc/board.d/02_network | 2 +-
target/linux/brcm63xx/base-files/etc/diag.sh | 1
snapshots.
Signed-off-by: Daniel Gonzalez Cabanelas
---
.../brcm63xx/base-files/etc/board.d/01_leds | 1 +
.../base-files/etc/board.d/02_network | 2 +-
target/linux/brcm63xx/base-files/etc/diag.sh | 1 +
.../linux/brcm63xx/base-files/lib/brcm63xx.sh | 3 +
target/linux
The router Nucom R5010UN v2 has the partitions defined for a 8MB flash, but the
flash chip is 16MB size. Fix it
Fixes: 474cde61234c ("brcm63xx: probe SPI flash through DT")
Signed-off-by: Daniel Gonzalez Cabanelas
---
Changes in v3:
- add missing SOB
Changes in v2:
- the m
The router Nucom R5010UN v2 has the partitions defined for a 8MB flash, but the
flash chip is 16MB size. Fix it
Fixes: 474cde61234c ("brcm63xx: probe SPI flash through DT")
---
Changes in v2:
- the mail client truncated the patch header, fixed
target/linux/brcm63xx/dts/r5010unv2.dts | 6 +++---
The router Nucom R5010UN v2 has the partitions defined for a 8MB flash, but the
flash chip is 16MB size. Fix it
Fixes: 474cde61234c ("brcm63xx: probe SPI flash through DT")
---
target/linux/brcm63xx/dts/r5010unv2.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/targe
Add missing pin controls for the Observa VH4032N router.
This fixes the wifi radio and ethernet LAN LEDs.
Signed-off-by: Daniel Gonzalez Cabanelas
---
Changes in v2:
- refresh the patch with the current changes
target/linux/brcm63xx/dts/vh4032n.dts | 4
1 file changed, 4 insertions
- use the blue LED for power, since the red LED is already used by
CFE in emergency mode.
- use the correct code for the wlan button
Signed-off-by: Daniel Gonzalez Cabanelas
---
Changes in v2:
- the v1 patch was truncated, fixed
target/linux/brcm63xx/base-files/etc/diag.sh | 2 +-
target
The WAN port has the wrong configuration in the kernel for the DVA-G3810BN/TL
The WAN port uses the internal phy, but it isn't enabled at the kernel board
data.
Fix it.
Signed-off-by: Daniel Gonzalez Cabanelas
---
.../brcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch
d-off-by: Daniel Gonzalez Cabanelas
---
target/linux/brcm63xx/dts/hg655b.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/brcm63xx/dts/hg655b.dts
b/target/linux/brcm63xx/dts/hg655b.dts
index df67429..6766b43 100644
--- a/target/linux/brcm63xx/dts/hg655b.dts
Add the SPROM fixups for the onboard BCM43222 wifi on the Observa
VH4032N
Signed-off-by: Daniel Gonzalez Cabanelas
---
.../brcm63xx/patches-4.14/577-board_VH4032N.patch | 70 --
.../brcm63xx/patches-4.14/578-board_R1000H.patch | 4 +-
.../brcm63xx/patches-4.14/579
ture works with the
brcm63xx GPIO pinctrl.
Signed-off-by: Daniel Gonzalez Cabanelas
---
This patch superseeds: "brcm63xx: VH4032N: add missing pinctrl"
target/linux/brcm63xx/dts/vh4032n.dts | 11 +++
1 file changed, 11 insertions(+)
diff --git a/target/linux/brcm63xx/dts/vh
- use the blue LED for power, since the red LED is already used by
CFE in emergency mode.
- use the correct code for the wlan button
Signed-off-by: Daniel Gonzalez Cabanelas
---
target/linux/brcm63xx/base-files/etc/diag.sh | 2 +-
target/linux/brcm63xx/dts/vh4032n.dts| 8
but they
wasn't still tested, so don't perform the reset on them for now.
Furthermore some bcm63xx SoCs doesn't have registers to perform
the reset (i.e BCM6358, BCM6348).
Signed-off-by: Daniel Gonzalez Cabanelas
---
.../425-bcm63xx_enet_add_switch_soft_res
Add missing pin controls for the Observa VH4032N router. This fixes
the wifi radio and ethernet LAN LEDs.
Signed-off-by: Daniel Gonzalez Cabanelas
---
target/linux/brcm63xx/dts/vh4032n.dts | 4
1 file changed, 4 insertions(+)
diff --git a/target/linux/brcm63xx/dts/vh4032n.dts
b/target
20 matches
Mail list logo
