- use the blue LED for power, since the red LED is already used by
CFE in emergency mode.
- use the correct code for the wlan button
Signed-off-by: Daniel Gonzalez Cabanelas <dgcb...@gmail.com>
---
target/linux/brcm63xx/base-files/etc/diag.sh | 2 +-
target/linux/brcm63xx/dts/vh4032n.dts | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh
b/target/linux/brcm63xx/base-files/etc/diag.sh
index afb3478..34464ec 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -43,7 +43,7 @@ set_state() {
status_led="spw303v:green:power+adsl"
;;
vh4032n)
- status_led="VH4032N:red:power"
+ status_led="VH4032N:blue:power"
;;
vr-3025un)
status_led="VR-3025un:green:power"
diff --git a/target/linux/brcm63xx/dts/vh4032n.dts
b/target/linux/brcm63xx/dts/vh4032n.dts
index 156d103..682d9d6 100644
--- a/target/linux/brcm63xx/dts/vh4032n.dts
+++ b/target/linux/brcm63xx/dts/vh4032n.dts
@@ -25,10 +25,10 @@
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
};
- wps {
- label = "wps";
+ wlan {
+ label = "wlan";
gpios = <&pinctrl 35 1>;
- linux,code = <KEY_WPS_BUTTON>;
+ linux,code = <KEY_WLAN>;
};
};
@@ -54,11 +54,11 @@
power_blue {
label = "VH4032N:blue:power";
gpios = <&pinctrl 22 0>;
+ default-state = "on";
};
power_red {
label = "VH4032N:red:power";
gpios = <&pinctrl 24 0>;
- default-state = "on";
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
