On 1/14/19 6:54 PM, Oskari Lemmela wrote:
> Add support for SPI driver and booting from SPI.
>
> Signed-off-by: Oskari Lemmela
> ---
> ...i-allwinner-spi-driver-sun6i-support.patch | 311 ++
> ...er-sunxi-fix-spurious-timeout-issues.patch | 30 ++
> .../302-sunxi-add-spi-flash-b
On 1/14/19 6:54 PM, Oskari Lemmela wrote:
> Use LZMA compressed fit image to load kernel and dtb.
> Fit image can be used load kernel and dtb from SPI flash.
>
> Signed-off-by: Oskari Lemmela
> ---
> package/boot/uboot-sunxi/uEnv-a64.txt | 5 ++-
> package/boot/uboot-sunxi/uEnv-default.txt
Hi all,
this is concerning the ubox package. If there is a more specific mailing
list/issue tracker for this, please tell me so.
We have found that the during validation of an NTP server in [1], the
validation as “host” fails if the “host” is a link-local IPv6 address.
If you track th
> Op 3 dec. 2018, om 14:38 heeft Andrzej Lossowsk het volgende
> geschreven:
>
> Currently after pivot to the USB disk (extroot),
> configuration and data from original root overlay are gone.
> Still accessible, but all previous configuration steps must be repeated
> (or data from original ro
Looks like C60 v2 needs the MAC address to be calculated
manually, while the C60 v1 gets it correctly without manual
interference.
Signed-off-by: Adrian Schmutzler
---
.../ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 7 ++-
1 file changed, 6 insertions(+), 1 deletion(-)
Looks like C60 v2 needs the MAC address to be calculated
manually, while the C60 v1 gets it correctly without manual
interference.
Signed-off-by: Adrian Schmutzler
---
.../ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 7 ++-
1 file changed, 6 insertions(+), 1 deletion(-)
21/01/2019 00:21, Jeff Klesky:
On 1/16/19 9:03 PM, Petr Štetiar wrote:
Jeff Klesky [2019-01-16 21:48:11]:
Hi,
subject could be just `ath79: Add support for GL.iNet AR-300M-Lite`,
since
you've already added that information about eth0 in the commit
message, and
that's the place where it be
Linus Walleij [2019-01-26 13:36:48]:
Hi,
> https://github.com/linusw/openwrt
> Branch "gemini-v4.19"
it builds fine here, thanks for fixing that.
Anyway, I still needed to handle DRM_PANEL_SEIKO_43WVF1G question while
running make in verbose mode. I've quickly looked at that symbol, and can't
This is the remainder of kernel patches for the v4.19
kernel. A whole slew of the previous patch stack is now
upstream, so this mainly contains the stuff that was
added upstream between v4.19 and v5.0-rc1, and then
the USB FOTG201 patches from Hans.
Signed-off-by: Linus Walleij
---
ChangeLog v2->
This adds a config for kernel v4.19 to the Gemini
target.
Signed-off-by: Linus Walleij
---
ChangeLog v2->v3:
- Just add the new config, don't switch kernel yet.
- Add missing CONFIG_USB_ROLE_SWITCH as disabled.
ChangeLog v1->v2:
- Run the config through OpenWrt make kernel_oldconfig
and inspect
This add the Gemini platform files to use kernel v4.19.
We do not switch to kernel v4.19 yet, let's do that later.
Since many of the in-flight patches are upstream in v4.19
we cut down a bit on the patch burden with this, and we
also invented and patched some new stuff.
The patches are also avai
On Sat, Jan 26, 2019 at 12:29 PM Linus Walleij wrote:
> On Sat, Jan 26, 2019 at 9:29 AM Petr Štetiar wrote:
> > then I had to add missing generic symbol CONFIG_USB_ROLE_SWITCH[1] and
> > CONFIG_DRM_PANEL_SEIKO_43WVF1G[2] in order to get past kernel config step
> > while running build in verbose
Hi Christian!
thanks for tidying up Gemini!
On Thu, Jan 24, 2019 at 4:21 PM Christian Lamparter wrote:
> > + cp $(IMAGE_KERNEL) $(BIN_DIR)/zImage
> > + mv $(BIN_DIR)/rd.gz $(BIN_DIR)/$(IMG_PREFIX)-sl93512r-rd.gz
> > + mv $(BIN_DIR)/hddapp.bz2 $(BIN_DIR)/$(IMG_PREFIX)-sl93512r-hddapp
Hi Petr,
thanks a lot for testing!
On Sat, Jan 26, 2019 at 9:29 AM Petr Štetiar wrote:
> FYI I can't merge your branch on top of current master.
>
> git reset --hard origin/master
> HEAD is now at 0465e41 mt76: update to the latest version
>
> git merge --no-edit gemini-4.19/gemini-v4.19
>
Hi,
FYI I can't merge your branch on top of current master.
git reset --hard origin/master
HEAD is now at 0465e41 mt76: update to the latest version
git merge --no-edit gemini-4.19/gemini-v4.19
Auto-merging target/linux/gemini/image/Makefile
CONFLICT (content): Merge conflict in target/lin
15 matches
Mail list logo
