On Tuesday 12 January 2010, David Brownell wrote:
> On Tuesday 12 January 2010, Alexei Babich wrote:
> > Error: 'arm11 target' JTAG error SCREG OUT 0x1f
> > Error: 'arm11 target' JTAG error SCREG OUT 0x1f
> > Error: 'arm11 target' JTAG error SCREG OUT 0x1f
> > Error: DPM REG READ -- fail -4
> > Err
> I assume you are booting via internal boot mode. In this mode the watchdog is
> enabled and this is what happens every 15 seconds as you noted.
Thank you:)
At the moment I see a shutdown of the power source (MC13892VL) - I will analyze
the reasons.
--
Regards,
Alexei Babich, circuit design en
Hi Alexei,
--- On Wed, 1/13/10, Alexei Babich wrote:
> From: Alexei Babich
> Subject: [Openocd-development] Freescale iMX35 & OpenOCD
> To: Openocd-development@lists.berlios.de
> Date: Wednesday, January 13, 2010, 4:08 AM
> Hello all.
> I sealed Freescale iMX35, conne
On Tuesday 12 January 2010, Alexei Babich wrote:
> Error: 'arm11 target' JTAG error SCREG OUT 0x1f
> Error: 'arm11 target' JTAG error SCREG OUT 0x1f
> Error: 'arm11 target' JTAG error SCREG OUT 0x1f
> Error: DPM REG READ -- fail -4
> Error: 'arm11 target' JTAG error SCREG OUT 0x1f
> Error: 'arm11 t
Hello all.
I sealed Freescale iMX35, connect to JTAG and JTAG 15 seconds later stops
working, here's the log:
---
[imp...@kb33 ~]$ openocd/bin/openocd -f openocd/imx35.cfg -f openocd/parport.cfg
Open On-Chip Debugger 0.4.0-rc1-dev-00017-gd4bef46 (2009-12-30-10:12)
For bug reports, read
htt
