On Jul 24, 2011 8:54 PM, "Peter Horn" wrote:
>
> Hi Tomek
>
> Without taking exact measurements, my impression is that the RLink
performs about the same with RIDE on Windows and OpenOCD on Linux. FWIW
RLink uses the Jungo driver on Windows.
Just for info - Jungo is used on winxp and below - vista
Am 22.07.2011 15:10, schrieb Tomek CEDRO:
On Fri, Jul 22, 2011 at 9:59 AM, Peter Horn wrote:
Besides the RLink I also have an Olimex ARM-USB-OCD adpater. On Windows,
stepping with the Olimex is considerably faster than with the RLink. On
Linux both adapters are on par. I'm Using the same STM32
Am 22.07.2011 20:02, schrieb Andreas Fritiofson:
Your RLink reports the same firmware version as my STM32Primer does. If
that means they are identical, I should be able to reproduce, but I
can't. Maybe it depends on the version of libusb?
I'm using OpenSuse 11.4. Here's what the package manager
On Fri, Jul 22, 2011 at 2:55 PM, Peter Horn wrote:
> Am 22.07.2011 13:36, schrieb Andreas Fritiofson:
>
>
>> I don't see how this error could be caused by my patches. If I'm not
>> mistaken, none of them have run at this point. It fails during init, and
>> that code is unchanged with the exceptio
On Fri, Jul 22, 2011 at 9:59 AM, Peter Horn wrote:
> Besides the RLink I also have an Olimex ARM-USB-OCD adpater. On Windows,
> stepping with the Olimex is considerably faster than with the RLink. On
> Linux both adapters are on par. I'm Using the same STM32 board and
> OCD-Version in all cases, s
Am 22.07.2011 13:36, schrieb Andreas Fritiofson:
I don't see how this error could be caused by my patches. If I'm not
mistaken, none of them have run at this point. It fails during init, and
that code is unchanged with the exception of some indentation fixes and
AFAICT they're OK.
Can you rever
On Fri, Jul 22, 2011 at 11:59 AM, Peter Horn wrote:
>
>
>>Patches 1/7 to 4/7 work ok, the problem is caused by patch 5/7
>>
>>
>>
>>On Windows using the embedded RLink, OpenOCD:
>>
>>
>>Open On-Chip Debugger 0.5.0-dev-snapshot (2011-07-21-07:10)
>>Licensed under GNU GPL v2
>>F
Am 22.07.2011 11:42, schrieb Andreas Fritiofson:
Stepping is still slow on Windows.
Stepping speed is not affected much by these patches since it depends
largely on latency, not throughput. These patches fixes a throughput
problem. Cortex-M3 stepping is really dependent on latency because,
On Fri, Jul 22, 2011 at 12:29 AM, Peter Horn wrote:
> Am 19.07.2011 22:43, schrieb Peter Horn:
>
>>
>> > Last time I've used OpenOCD with RLink stepping was awfully slow,
> > about 3 seconds or more per step. This was some weeks ago and on
> > Windows / Mingw. On Linux, stepping is considerably f
Am 19.07.2011 22:43, schrieb Peter Horn:
Hi Andreas
I have access to a standalone Rlink, an Olimex STM32-P103 board and
a Raisonance REva STM32 connectivity board which has an onboard
Rlink.
I've applied your patches and built OpenOCD on Linux with success. A
quick test revealed no problems but
Hi Andreas
I have access to a standalone Rlink, an Olimex STM32-P103 board and a
Raisonance REva STM32 connectivity board which has an onboard Rlink.
I've applied your patches and built OpenOCD on Linux with success. A
quick test revealed no problems but the test program I've used is too
sma
On Mon, Jul 18, 2011 at 4:59 PM, Jean-Claude Repetto wrote:
> Le 18/07/2011 16:25, Andreas Fritiofson a écrit :
>
>
>> Yes it's best to put these on hold for 0.5.0. It needs some testing on
>> the standalone RLink or other variants, I currently only have access to
>> STM32 Primers. Also more thor
Le 18/07/2011 16:25, Andreas Fritiofson a écrit :
Yes it's best to put these on hold for 0.5.0. It needs some testing on
the standalone RLink or other variants, I currently only have access to
STM32 Primers. Also more thorough testing in general. Anyone feels like
helping?
Hello Andreas,
I h
On Mon, Jul 18, 2011 at 2:33 PM, Tomek CEDRO wrote:
> Hello Andreas!
>
> Do you know what is the difference between JTAG (on Stm32Primer) and
> SWD (on Stm32Primer2) RLink interface? Would they run on existing
> driver? Do you have some kind of manual or technical specification?
Other than the
On Mon, Jul 18, 2011 at 4:03 PM, Spencer Oliver wrote:
> On 18 July 2011 11:13, Andreas Fritiofson
> wrote:
> > This patch set fixes some general problems in the RLink interface driver.
> >
> > Most importantly it fixes a performance bug that have been causing
> decreased throughput.
> >
> > Spee
On 18 July 2011 11:13, Andreas Fritiofson wrote:
> This patch set fixes some general problems in the RLink interface driver.
>
> Most importantly it fixes a performance bug that have been causing decreased
> throughput.
>
> Speed test on a STM32 Primer (STM32F103 platform with built in RLink) wit
Hello Andreas!
Do you know what is the difference between JTAG (on Stm32Primer) and
SWD (on Stm32Primer2) RLink interface? Would they run on existing
driver? Do you have some kind of manual or technical specification?
Best regards! :-)
Tomek
--
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
_
This patch set fixes some general problems in the RLink interface driver.
Most importantly it fixes a performance bug that have been causing decreased
throughput.
Speed test on a STM32 Primer (STM32F103 platform with built in RLink) with the
following openocd.cfg
---
source [find interface/rlin
18 matches
Mail list logo
