Re: [Openocd-development] vsllink driver compile fails with'vsllink_debug_buffer' defined but not used

OK. Thanks. simonqian.openocd via foxmail Sender: Eric Wetzel Date: 2011年8月30日(星期二) 下午9:52 To: openocd-development Subject: [Openocd-development] vsllink driver compile fails with'vsllink_debug_buffer' defined but not used vsllink.c defines the 'vsllink_debug_buffer' function when verbose USB

Re: [Openocd-development] vsllink driver compile fails with'vsllink_debug_buffer' defined but not used

USB communication is handled by code under versaloon directory. So _DEBUG_USB_COMMS_ should not be used in vsllink.c. Attachment is the patch. simonqian.openocd via foxmail 发件人： Øyvind Harboe 发送时间： 2011年8月31日(星期三) 上午12:36 收件人： Eric Wetzel 抄送： openocd-development 主题： Re: [Openocd-development]

Re: [Openocd-development] Sorry for breaking the thread

My new emial for openocd is ready, that is simonqian__DOT__openocd__AT__gmail__DOT__com Please remove my current email and add that one. I have subscribed with my new email. 2009-05-26 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com

[Openocd-development] Sorry for breaking the thread

As Zach Welch mentioned, my posts breaks the thread. I don't know why, and even don't know how to break it. I'll switch to GMail for OpenOCD maillist. Should it be working properly? 2009-05-26 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) ww

[Openocd-development] svf patch for segfault

ll IF drivers support such a long scan? 2009-05-26 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com svf_fix_segfault_20090526_0.patch Description: Binary data ___ Openocd-development mailing list Openocd-develo

[Openocd-development] svf patch for 32bit scan

Add svf_get_mask_u32 to generate a mask according to bitlen. Fix this bug in other functions except for svf_check_tdo. Next patch will fix the segfault reported by R.Doss. 2009-05-26 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com

Re: [Openocd-development] svf tap name patch

This patch add tap_state_svf_name in svf.c. Change RUN/IDLE to IDLE. IDLE is svf standard. 2009-05-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： SimonQian 发送时间： 2009-05-25 23:15:58 收件人： SimonQian; Openocd-Dev 抄送： 主题： Re: [Openocd

Re: [Openocd-development] svf tap name patch

This patch has some problems, in the recent jtag.h, tap states are different from original settings. I'll provide another patch soon. 2009-05-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： SimonQian 发送时间： 2009-05-25 22:03:56 收件人： Openoc

[Openocd-development] Does IF drivers designed to accept very large scan size?

rds, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

[Openocd-development] svf tap name patch

This patch setup svf tap name in svf.c instead of calling tap_state_name. 2009-05-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com svf_tap_name_20090525.patch Description: Binary data ___ Openocd-development

[Openocd-development] svf fix according to SVN head and R.Doss's test

tch to fix 1, and then 2. 2009-05-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] support avr32

For supporting AVR32 debugging under IAR EWAVR32 and AVR32Studio, you MUST emulate JTAGICE mkII. Does USBprog support AVR32 debugging? 2009-05-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Xiaofan Chen 发送时间： 2009-05-25 11:36:35 收件人

Re: [Openocd-development] support avr32

430 isn't standard JTAG. So I don't think it possible to support MSP430 in OpenOCD. 2009-05-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Xiaofan Chen 发送时间： 2009-05-25 11:28:33 收件人： michelcatudal 抄送： openocd-development 主题： Re: [

Re: [Openocd-development] support avr32

AVR32, because it will use JTAGICE mkII's VID/PID of Atmel. 2009-05-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Xiaofan Chen 发送时间： 2009-05-25 11:18:37 收件人： David Brownell 抄送： openocd-development 主题： Re: [Openocd-development] support a

Re: [Openocd-development] Building OpenOCD with Cygwin

Add #include "stdint.h" in replacements.h to solve this problem. 2009-05-24 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Xiaofan Chen 发送时间： 2009-05-24 00:36:17 收件人： Openocd-Dev 抄送： 主题： [Openocd-development] Building OpenOCD w

Re: [Openocd-development] SVF patch according to Johann's test

(int)). Attached patch remove other modifications except for svf_check_tdo function. 2009-05-23 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Rick Altherr 发送时间： 2009-05-23 01:44:54 收件人： SimonQian 抄送： 'openocd-development' 主题： Re

Re: [Openocd-development] SVF patch according to Johann's test

ormat, different type arg (arg 4) svf.c: In function `handle_svf_command': svf.c:333: warning: int format, different type arg (arg 3) They should be the same problem. 2009-05-21 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： SimonQian 发送时间：

Re: [Openocd-development] SVF patch according to Johann's test

I'll check it out this week. 2009-05-21 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Rick Altherr 发送时间： 2009-05-21 13:32:22 收件人： SimonQian 抄送： 'openocd-development' 主题： Re: [Openocd-development] SVF patch according to Johann

Re: [Openocd-development] Compile error under Cygwin

Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Zach Welch 发送时间： 2009-05-20 02:26:23 收件人： SimonQian 抄送： Openocd-Dev 主题： Re: [Openocd-development] Compile error under Cygwin On Wed, 2009-05-20 at 02:22 +0800, SimonQian wrote: > Hi, > In replacement.h stand

[Openocd-development] Compile error under Cygwin

Hi, In replacement.h standard integer type is used but stdint.h isn't included. 2009-05-20 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berli

[Openocd-development] The ODev project

Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] AVR support -- new tap problem

It's OK now. Thanks. 2009-04-28 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： �yvind_Harboe 发送时间： 2009-04-28 03:35:44 收件人： SimonQian 抄送： Gene Smith; openocd-development 主题： Re: Re: [Openocd-development] AVR support -- new tap problem

Re: [Openocd-development] AVR support -- new tap problem

Attachment is my patch created by diff, but strangely, I can't patch this patch. Maybe the reason is that these files in the SVN top is non-linux-style. 2009-04-28 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： �yvind_Harboe 发送时间： 2009-04-2

Re: [Openocd-development] bug in svf.c

Can you provide the -d3 log file? Try using an simple svf file which will cause the error. 2009-04-27 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： R.Doss 发送时间： 2009-04-27 21:15:00 收件人： OpenOCD Development 抄送： 主题： [Openocd-development] bug in

[Openocd-development] patch for error compiling vsllink if --enable-verbose-jtag-io is set

avoid error. Please commit this patch. 2009-04-27 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com vsllink.update.patch Description: Binary data ___ Openocd-development mailing list Openocd-development@li

[Openocd-development] build warning under MinGW

replacements.c: In function 'win_select': replacements.c:175: warning: cast does not match function type replacements.c:250: warning: cast does not match function type 2009-04-27 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： �yvind_Ha

Re: [Openocd-development] AVR support -- new tap problem

If this patch can be committed, I think I should also provide the config file for mega128. And final code of AVR support maybe totally different. 2009-04-27 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： �yvind_Harboe 发送时间： 2009-04-27 17:28:30

Re: [Openocd-development] Openocd-development Digest, Vol 31, Issue 112

est Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

[Openocd-development] AVR patch

vrt.c should be modified. Because Versaloon will not go through IR_PAUSE/DR_PAUSE when accessing ir or dr. And I'm not sure whether it will cause problems. 2009-04-27 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com avr.patch Description: B

Re: [Openocd-development] AVR support -- new tap problem

Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： �yvind_Harboe 发送时间： 2009-04-27 15:37:31 收件人： SimonQian 抄送： Openocd-Dev 主题： Re: Re: Re: [Openocd-development] AVR support -- new tap problem Better? -- �yvind Harboe Embedded software and har

Re: [Openocd-development] AVR support -- new tap problem

end of chain! 576 0x Warn : 190 344 jtag.c:1553 jtag_examine_chain(): Unexpected idcode after end of chain! 608 0x 2009-04-27 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： �yvind_Harboe 发送时间： 2009-04-27 14:55:40 收件人： SimonQian

Re: [Openocd-development] AVR support -- new tap problem

It maybe will raise other problems. Leave this probem as it is, or future improvement will solve it. And it will not affact AVR programming support. 2009-04-27 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： �yvind_Harboe 发送时间： 2009-04-27 13:44:53

Re: [Openocd-development] Keil AGDI interface to openOCD?

I can't find the AGDI spec, does it open? 2009-04-27 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Dario Vecchio 发送时间： 2009-04-27 05:41:54 收件人： Pedro Martos; openocd-development@lists.berlios.de 抄送： 主题： Re: [Openocd-development] Keil

[Openocd-development] AVR support -- success to chip_erase and program_flash

in anyway... It could be faster if I optimize the operation. How to fix the errors in the log? I mentioned it in the previous mail, but no reply. 2009-04-26 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd

[Openocd-development] AVR support -- new tap problem

after this ID, all TDO will be '1'. AVR will not output TDI value after JTAG_ID, it will output all '1' instead. 2009-04-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-de

Re: [Openocd-development] The List (of OpenOCD Tasks) for r1509

mmunity can keep you from unnecessarily "falling" off of a cliff. I can first try to add support to AVR flash programming thru JTAG. If it is OK, it will be easy to add support to other MCUs as C8051F and so on. I'll report when there is a problem. 2009-04-23 Best Regar

Re: [Openocd-development] The List (of OpenOCD Tasks) for r1509

with standard JTAG interface. I can rewrite these codes to make it work in OpenOCD when I have time. But I don't know is these supports out of OpenOCD's box? 2009-04-22 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Zach Welch 发送时间： 2009-04

Re: [Openocd-development] SVF patch according to Johann's test

So the patch in this mail is enough. It fix only the svf_check_tdo function. 2009-04-03 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Spencer Oliver 发送时间： 2009-04-03 20:41:39 收件人： 'SimonQian'; 'openocd-development' 抄

[Openocd-development] SVF patch according to Johann's test

Hi, Attachment is the patch. Fix: 1. As Johann suggested, max line width is 80 characters, according to GNU coding standard. 2. In svf_check_tdo, call buf_cmp_mask to do the comparation. 2009-04-03 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com

Re: [Openocd-development] xsvf patch

ara[i].buffer_offset; is the index of the data in the buffer. Patch in the attachment fix this problem. If it is tested OK, I think this patch can be commited. 2009-04-03 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Johann F. 发送时间： 2009-

[Openocd-development] Support to interfaces except JTAG

such support is actually planed, I'll try to implement these support in OpenOCD. 2009-04-02 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlio

Re: [Openocd-development] xsvf patch

st Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Johann F. 发送时间： 2009-04-02 15:46:28 收件人： SimonQian 抄送： openocd-development 主题： Re: [Openocd-development] xsvf patch On Thu, 2 Apr 2009 02:49:40 +0800 "SimonQian" wrote: > Thank you for t

Re: [Openocd-development] xsvf patch

f it has long lines (> > 80). Yes, actually I noticed this problem, and in my afterwards software code length should be <= 80. 2009-04-02 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Johann F. 发送时间： 2009-04-02 15:46:28 收件人： SimonQian 抄

Re: [Openocd-development] xsvf patch

the attached patch, and svf_check_tdo will print the right information. 2009-04-02 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Johann F. 发送时间： 2009-04-02 01:15:11 收件人： SimonQian 抄送： openocd-development 主题： Re: [Openocd-development] xsvf pa

Re: [Openocd-development] xsvf patch

Hi, > openocd - svf - failed, > urjtag (ppdev) - svf - ok, Can you provide the log with -d3 when doing SVF? 2009-04-02 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Johann F. 发送时间： 2009-04-01 23:24:55 收件人： Dick Hollenbeck 抄送： o

Re: [Openocd-development] STM32 flash performance

Hi, > Originally the stm32 had a register so you could query the ram size - ST in > their wisdom have removed this feature !! You can query the ram size and flash size by visiting 0x17E0 in the latest STM32 chips. 2009-03-24 Best Regards, Simon Qian SimonQian(simonq...@simonqi

Re: [Openocd-development] STM32 RIDE7 OPENCOD

OpenOCD. 2009-03-04 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] STM32 flash programming performance

test it? Just call jtag_execute_queue once. Some tests on Versaloon(565KHz, normal mode): Windows(unfixed): 5.2KB/s Windows(fixed): 7.9KB/s Ubuntu(fixed): 9.6KB/s Amazing to see that Ubuntu is so much faster than Windows when doing the same operation. 2009-02-28 Best Regards, Simon Qian SimonQian(simon

Re: [Openocd-development] STM32 flash programming performance

You mean STM32 is slow when writing data into flash? But for ISP operation through COMM port(at a high baudrate), it can be as fast as 20KBytes/s as I remember. 2009-02-27 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： �yvind_Harboe 发送时间： 2009-02

Re: [Openocd-development] Cortex target_write_memory() performance/STM32 flash programming

T that slow. For STM32, at about 8kB/s for flash programming. But my driver is based on Versaloon driver. Is it possible that there is problem with JLink driver? 2009-02-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com __

Re: [Openocd-development] Cortex target_write_memory() performance /STM32 flash programming

5000s (7.946759 kb/s) Does it because that CM3 can only support a slow JTAG frequency? 2009-02-24 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： �yvind_Harboe 发送时间： 2009-02-24 05:55:48 收件人： openocd-development 抄送： 主题： [Openocd-development] C

Re: [Openocd-development] Fwd: openocd-0.1.0.mci

Yes, It's OK by my side, too. According to some users of Versaoon, it works(Eclipse+CodesourceryG++Lite) execept it doesn't support GDB Server in IAR. 2009-02-20 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： freddie_chopin 发送时间： 2009

Re: [Openocd-development] 0.1.0 package for windows

Good to see that. Some suggestions: 1. The exe file size is more than 5MB. Why not strip it first? 2. It shows message saying that FTD2XX.dll is not found even if I run 'openocd -h'. Not all users will have this file installed. 2009-01-25 Best Regards, Simon Qian SimonQ

[Openocd-development] svf patches

instead of jtag_add_runtest 7. call jtag_add_tlr if TAP_RESET is in the pathmove instead of reporting error message 8. interpret 'TRST Z' as 'TRST OFF' 9. parameter to jtag_add_reset error commit if acceptable 2009-01-22 Best Regards, Simon Qian SimonQian(simonq...@simonqi

Re: [Openocd-development] xsvf patches

In this patch, parameter to jtag_add_reset is error. Shouldn't it be: case XTRST_ON: jtag_add_reset(1, 0); break; case XTRST_OFF: jtag_add_reset(0, 0); break; 2009-01-22 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Dick Hollenbeck 发送时间：

Re: [Openocd-development] svf support

009-01-22 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] svf support

the 'quite' mode, I just want to test the execution speed for compare. I don't know how many percentage of the time, printing function will take. 2009-01-21 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Dick Hollenbeck 发送时间： 2009-

[Openocd-development] vsllink update -- adding support to JTAG_STABLECLOCKS

cess // set end_state vsllink_end_state(saved_end_state); cur_state = TAP_IDLE; if (end_state != TAP_IDLE) { vsllink_state_move(); } } 2009-01-21 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com vsllink.patch Descripti

Re: [Openocd-development] svf support

vf is the file format from xilinx, so maybe it will not support devices from Altera. If parameter of TRST is "ABSENT", it's ok to ignore it and proceed to generate xsvf file. 2009-01-21 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件

Re: [Openocd-development] svf support

Thank you. I'll try it after new year -- Chinese New Year. And report if there is any problem. 2009-01-19 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Dick Hollenbeck 发送时间： 2009-01-19 21:59:11 收件人： SimonQian 抄送： openocd-development 主

Re: [Openocd-development] svf support

, just remove my code for svf support. I will be glad to use a better usable solution. 2009-01-19 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Rick Altherr 发送时间： 2009-01-19 15:13:30 收件人： SimonQian 抄送： openocd-development 主题： Re: [Openocd

Re: [Openocd-development] svf support

enOCD for svf, but I can test OpenOCD to make sure it works with my targets. 2009-01-18 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com 发件人： Rick Altherr 发送时间： 2009-01-18 04:23:22 收件人： SimonQian 抄送： �yvind_Harboe; openocd-development 主题： Re: [Open

Re: [Openocd-development] SVF in OpenOCD

Again, C in my opinion, it not the easiest language in which > to maintain something like this. It is especially curious why this > should exist at all when as of two weeks ago there was an SVF conversion > tool in this project. I use C, because it can be library-independent. Otherwise, I

[Openocd-development] SVF in OpenOCD

enOCD. 2009-01-17 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] svf support

howing how the SVF file is parsed. 2009-01-16 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com log.txt Description: Binary data ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://l

[Openocd-development] svf support

(svf_file, &command_para)) { if(ERROR_OK != svf_parser_run_command(&command_para)) { LOG_ERROR("command execute failed at line %d\n", svf_file_line_index); ret = ERROR_FAIL; } command_num++; } 2009-01-15 Best Regards, Simon Qian SimonQian(simon

Re: [Openocd-development] How to introduce new JTAG tool?

Hi, > Thanks for the info below. > vsgui is windows only? You can recompile the code in Linux, Lazarus can support different platforms. There is a picture of the Ubuntu version of vsgui. All the source code is in the Versaloon-Mini_Open.zip. 2008-12-25 Best Regards, Simon Qian Sim

Re: [Openocd-development] How to introduce new JTAG tool?

openocd simple to use. 2008-12-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] How to introduce new JTAG tool?

and usbprog driver, should I add these information? Protocols of vsllink is totally different from jlink and usbprog, so it will not break any license. 2008-12-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___

Re: [Openocd-development] How to introduce new JTAG tool?

ng list. There is an > example of such a patch from a week or so ago (look for rlink in the mailing > list archives). So a patch is enough? Attachment is the patch for my tool. Is it OK? Need any other docs? 2008-12-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) -

[Openocd-development] How to introduce new JTAG tool?

ARMV7_GDB_HACKS can be disabled if using the latest Codesourcery G++ Lite for ARM toolchain. Thers is also a very simple GUI front-end of OpenOCD available(with all source code), which is developped with Lazarus. 2008-12-25 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com

Re: [Openocd-development] About GDB sending "mfffffffe,4"

his position. On cortex-m3, this address will be anded(&) with 0xfffe, so arm-none-eabi-gdb will access 0xfffe. If OpenOCD return OK to this command "mfffe,4", arm-none-eabi-gdb will then send "Z0fffe,2" after some memory-reading commands. 2008-12-17 Best

[Openocd-development] About GDB sending "mfffffffe,4"

6...Packet received: . 2008-12-16 Best Regards, Simon Qian SimonQian(simonq...@simonqian.com) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] Debug in RAM error with IAR EWARM thruGDBsince svn920(arm7/9 breakpoint cleanup)

Hi, > Simon - what is your status with OpenOCD? Sorry, I am busy with another project currently. I'll compare the -d3 log from OpenOCD and GDB Server log from IAR next week and give some more particular information. 2008-09-16 Best Regards, Simon Qian SimonQian([EMAIL P

Re: [Openocd-development] Debug in RAM error with IAR EWARM thru GDB since svn920(arm7/9 breakpoint cleanup)

mbeded Workbench for ARM 5.11 doesn't have GDB console output. After further test, I think it's the bug of IAR tools. If I open the disassembly window, the error can easily be reproduced. But if I close the disassembly window, everything going OK. 2008-09-13 Best Regards, Simo

[Openocd-development] Debug in RAM error with IAR EWARM thru GDB since svn920(arm7/9 breakpoint cleanup)

acter 0x62 2008-09-13 Best Regards, Simon Qian SimonQian([EMAIL PROTECTED]) www.SimonQian.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] [PATCH] process reset - ready for test

Hi, in jim.c, DELTA_EPOCH_IN_MICROSECS is defined but DELTA_EPOC_IN_MICROSECS is used. 2008-09-08 Best Regards, Simon Qian SimonQian([EMAIL PROTECTED]) www.SimonQian.com ___ Openocd-development mailing list Openocd-development

Re: [Openocd-development] cortex support

Hi, > Earlier I was asking about cortex support. > Spen pointed me here: > spen> openocd contains a few hacks (define ARMV7_GDB_HACKS in > spen> armv7m.h) that makes mainlinegdb behave better with the > spen> v7 arch. > In other mail - > SimonQian> I am us

[Openocd-development] ENOTSUP not define in errno.h in MinGW

Hi, I compiled the latest SVN. It's OK in Cygwin, but fail in MinGW. The errno.h in Cygwin contain ENOTSUP, but errno.h in MinGW doesn't. It's OK after I add "#define ENOTSUP 134 /* Not supported */ ". 2008-07-07 Best Regards, Simon Qian SimonQian([EMAIL PROTECTED

Re: [Openocd-development] Polling target failure with SVN 754M onSTM32 chips

hat, I check the signals and found that the SRST is out of control. I am using IAR EWARM 5.11 with STM32, it support OpenOCD. But ARMV7_GDB_HACKS in armv7m.h must be disabled. I was told that GDB doesn't support Cortex chips. 2008-07-06 Best Regards, Simon Qian SimonQian([EMAIL PROTE

[Openocd-development] Polling target failure with SVN 754M on STM32 chips

log file and the configuration file. 2008-07-06 Best Regards, Simon Qian SimonQian([EMAIL PROTECTED]) www.SimonQian.com log.txt Description: Binary data openocd_stm32.cfg Description: Binary data ___ Openocd-development mailing list Openocd

[Openocd-development] LPC2138 JTAG chain 1 error?

(JTAG chain 1 of LPC), the first instruction return all 0s, and the others return all 1s. My Openocd is svn 724M. What will cause that problem? And what else I can check? Attachment is the log file and the configuration file of LPC2138. 2008-06-24 Best Regards, Simon Qian SimonQian([