On 11/28/2017 07:37 AM, Madalin-cristian Bucur wrote:
>> -Original Message-
>> From: Andrew Lunn [mailto:and...@lunn.ch]
>> Sent: Tuesday, November 28, 2017 4:13 PM
>> To: Madalin-cristian Bucur
>> Subject: Re: [RFC] Support for SGMII 2500
>>
>>
> -Original Message-
> From: Andrew Lunn [mailto:and...@lunn.ch]
> Sent: Tuesday, November 28, 2017 4:13 PM
> To: Madalin-cristian Bucur
> Subject: Re: [RFC] Support for SGMII 2500
>
> > Hi Andrew,
> >
> > Bhaskar is working on enabling a PFE [1] M
> Hi Andrew,
>
> Bhaskar is working on enabling a PFE [1] MAC connected to an Aquantia AQR107
> PHY [2] on a LS1012AQDS board. Initially I've indicated 2500Base-X too, but it
> seems the HW actually works in SGMII mode. The QDS boards are lower volume,
> higher spec boards than the RDBs [3], they
> -Original Message-
> From: Andrew Lunn [mailto:and...@lunn.ch]
> Sent: Tuesday, November 28, 2017 3:30 PM
> Subject: Re: [RFC] Support for SGMII 2500
>
> On Tue, Nov 28, 2017 at 07:25:48AM +, Madalin-cristian Bucur wrote:
> > Hi,
> >
> > There is
On Tue, Nov 28, 2017 at 07:25:48AM +, Madalin-cristian Bucur wrote:
> Hi,
>
> There is a disconnect between the SGMII 2500 support in u-boot and Linux.
> Bhaskar is trying to add support for a SGMII interface working at 2.5Gbps
> by using the PHY connection type "sgmii-2500" in the device tree
; Poonam Aggrwal
>
> Cc: Shengzhou Liu ; York Sun ; u-
> b...@lists.denx.de
> Subject: RE: [RFC] Support for SGMII 2500
>
> + Anji, Calvin, Prabhakar, Poonam.
>
> -Original Message-
> From: Madalin-cristian Bucur
> Sent: Tuesday, November 28, 2017 12:56 PM
> To: And
+ Anji, Calvin, Prabhakar, Poonam.
-Original Message-
From: Madalin-cristian Bucur
Sent: Tuesday, November 28, 2017 12:56 PM
To: Andrew Lunn ; f.faine...@gmail.com; netdev@vger.kernel.org
Cc: Bhaskar Upadhaya ; Shengzhou Liu
; York Sun ; u-b...@lists.denx.de
Subject: [RFC] Support for
Hi,
There is a disconnect between the SGMII 2500 support in u-boot and Linux.
Bhaskar is trying to add support for a SGMII interface working at 2.5Gbps
by using the PHY connection type "sgmii-2500" in the device tree:
phy-connection-type = "sgmii-2500";
This is supported by u-boot, in in
