Hi Sean,
[auto build test WARNING on robh/for-next]
[also build test WARNING on v4.11-rc2 next-20170310]
[cannot apply to net-next/master net/master]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system]
url:
https://github.com/0day-ci/linux/commi
Hi Sean,
[auto build test WARNING on robh/for-next]
[also build test WARNING on v4.11-rc2 next-20170310]
[cannot apply to net-next/master net/master]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system]
url:
https://github.com/0day-ci/linux/commi
On Tue, 2017-03-14 at 00:11 +0100, Andrew Lunn wrote:
> > +static int
> > +mt7530_setup(struct dsa_switch *ds)
> > +{
> > + struct mt7530_priv *priv = ds->priv;
> > + int ret, i, phy_mode;
> > + u8 cpup_mask = 0;
> > + u32 id, val;
> > + struct regmap *regmap;
> > +
> > + /* Make sure
> +static int
> +mt7530_setup(struct dsa_switch *ds)
> +{
> + struct mt7530_priv *priv = ds->priv;
> + int ret, i, phy_mode;
> + u8 cpup_mask = 0;
> + u32 id, val;
> + struct regmap *regmap;
> +
> + /* Make sure that cpu port specfied on the dt is appropriate */
> + if
Hi Sean
Just looking at the GPIO handling at the moment.
> + /* Reset whole chip through gpio pin or
> + * memory-mapped registers for different
> + * type of hardware
> + */
> + if (priv->mcm) {
> + regmap_update_bits(priv->ethsys, SYSC_REG_RSTCTRL,
> +
From: Sean Wang
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N platform which
includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY.
Among these ports, The port from 0 to 4 are the user ports connecting
with t
