On Mon, 26 Mar 2007, Jay Vosburgh wrote:
> Andrew Morton <[EMAIL PROTECTED]> wrote:
>
> >On Mon, 26 Mar 2007 21:50:01 -0800 [EMAIL PROTECTED] wrote:
> >
> >> Replace system timer with work queue in monitor functions. The reason for
> >> this change is that bonding handlers calls various sleeping
Andrew Morton <[EMAIL PROTECTED]> wrote:
>On Mon, 26 Mar 2007 21:50:01 -0800 [EMAIL PROTECTED] wrote:
>
>> Replace system timer with work queue in monitor functions. The reason for
>> this change is that bonding handlers calls various sleeping functions from
>> the timer handler which is not allo
From: Herbert Xu <[EMAIL PROTECTED]>
Date: Tue, 27 Mar 2007 15:38:21 +1000
> [NET]: Allow forwarding of ip_summed except CHECKSUM_COMPLETE
>
> Right now Xen has a horrible hack that lets it forward packets with
> partial checksums. One of the reasons that CHECKSUM_PARTIAL and
> CHECKSUM_COMPLETE
From: Stephen Hemminger <[EMAIL PROTECTED]>
Date: Mon, 26 Mar 2007 21:13:07 -0700
> Do we have to worry about self inflicted infinite loops?
> Shouldn't there be some way to some basic validation?
We do, and there is. You obviously didn't read Thomas's patch.
He prevents loops by only allowing
I have a note here that this patch needs additional work.
I forget what it was, there has since been no followup and hence I shall now
drop this patch.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://v
On Mon, 26 Mar 2007 21:50:01 -0800 [EMAIL PROTECTED] wrote:
> Replace system timer with work queue in monitor functions. The reason for
> this change is that bonding handlers calls various sleeping functions from
> the timer handler which is not allowed. Because we cannot share the main
> workqu
From: Adrian Bunk <[EMAIL PROTECTED]>
This patch makes the following needlessly global functions static:
- bond_mode_name()
- bond_sethwaddr()
- bond_mii_monitor()
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/net/bonding/bond_main.c
From: Jaroslav Kysela <[EMAIL PROTECTED]>
Replace system timer with work queue in monitor functions. The reason for
this change is that bonding handlers calls various sleeping functions from
the timer handler which is not allowed. Because we cannot share the main
workqueue threads (rtnl_lock is
From: Grant Grundler <[EMAIL PROTECTED]>
IRQs are racing with tulip_down(). DMA can be restarted by the interrupt
handler _after_ we call tulip_stop_rxtx() and the DMA buffers are unmapped.
The result is an MCA (hard crash on ia64) because of an IO TLB miss. The
long-term fix is to make the int
From: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Date: Thu, 09 Nov 2006 16:12:30 -0800 (PST)
From: David Miller <[EMAIL PROTECTED]>
This fixes the most obvious 64-bit problems, but it is still very very
broken in other aspects. It is bad enough that I feel irrespon
From: Brian Braunstein <[EMAIL PROTECTED]>
Fixed tun/tap driver's handling of hw addresses. The hw address is stored
in both the net_device.dev_addr and tun.dev_addr fields. These fields were
not kept synchronized, and in fact weren't even initialized to the same
value. Now during both init and
From: "Robert P. J. Day" <[EMAIL PROTECTED]>
Delete the unreferenced header file include/linux/sdla_fr.h.
Signed-off-by: Robert P. J. Day <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
include/linux/sdla_fr.h | 638 --
1 file change
From: "Robert P. J. Day" <[EMAIL PROTECTED]>
Delete the unreferenced header file include/linux/if_wanpipe_common.h,
as well as the reference to it in the Doc file.
Signed-off-by: Robert P. J. Day <[EMAIL PROTECTED]>
Cc: Krzysztof Halasa <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PRO
From: Atsushi Nemoto <[EMAIL PROTECTED]>
This patch is to make netif_receive_skb() robust on NAPI+NETPOLL case.
1. netpoll_send_skb() calls netpoll_poll() with interrupt disabled.
2. netpoll_poll() calls poll_napi().
3. poll_napi() calls dev->poll().
4. dev->poll() (for example rtl8139_poll()) ca
From: Ingo Molnar <[EMAIL PROTECTED]>
work around a NULL skb dereference crash that occurs during high load.
Signed-off-by: Ingo Molnar <[EMAIL PROTECTED]>
Cc: Ayaz Abdulla <[EMAIL PROTECTED]>
Cc: Jeff Garzik <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/net/f
From: Ayaz Abdulla <[EMAIL PROTECTED]>
The tx timeout routine was waking the tx queue conditionally. However, it
must call it unconditionally since the dev_watchdog has halted the tx queue
before calling the timeout function.
Signed-off-by: Ayaz Abdulla <[EMAIL PROTECTED]>
Signed-off-by: Andrew
From: "Robert P. J. Day" <[EMAIL PROTECTED]>
Signed-off-by: Robert P. J. Day <[EMAIL PROTECTED]>
Cc: Jeff Garzik <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/net/skfp/h/lnkstat.h | 84 -
1 file changed, 84 deletions(-)
diff -
From: Folkert van Heusden <[EMAIL PROTECTED]>
The baycom_ser_fdx driver did not allow i/o ports >= 0x1000. Now that
there are pci cards (with rs232 ports) which use for example 0xb800 this
limit should not exists.
Also, for non kernel coders find the cause of problems was challenging so I
added
From: Jean Delvare <[EMAIL PROTECTED]>
strlcpy already accounts for the trailing zero in its length
computation, so there is no need to substract one to the buffer size.
Signed-off-by: Jean Delvare <[EMAIL PROTECTED]>
Cc: Jan-Bernd Themann <[EMAIL PROTECTED]>
Cc: Thomas Klein <[EMAIL PROTECTED]>
From: "Cyrill V. Gorcunov" <[EMAIL PROTECTED]>
This patch adds checking for allocated DVMA memory and granted IRQ line.
Signed-off-by: Cyrill V. Gorcunov <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/net/sun3lance.c | 16 +++-
1 file changed, 15
From: Ayaz Abdulla <[EMAIL PROTECTED]>
The nic poll routine was missing the call to the optimized irq routine.
This patch adds the missing call for the optimized path.
See http://bugzilla.kernel.org/show_bug.cgi?id=7950 for more information.
Signed-off-by: Ayaz Abdulla <[EMAIL PROTECTED]>
Signe
From: Bernard Lee <[EMAIL PROTECTED]>
Setting bit 4 & 5 alone in 8139too module media option does not really
force 100Mbps full-duplex mode. When media option bit 0-3 is cleared,
8139too module does not force media setting. Therefore, bit 0-3 requires
to be set for bit 4 & 5 to take effect. The
Hi Dave:
[NET]: Allow forwarding of ip_summed except CHECKSUM_COMPLETE
Right now Xen has a horrible hack that lets it forward packets with
partial checksums. One of the reasons that CHECKSUM_PARTIAL and
CHECKSUM_COMPLETE were added is so that we can get rid of this hack
(where it creates two ext
On Tue, Mar 27, 2007 at 03:22:43PM +1000, Herbert Xu wrote:
>
> [NET]: Allow ip_summed to be forwarded as is
Nevermind, that one is broken too. I forgot to update the complete
checksums when forwarding.
Cheers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[EMAIL
Hi Dave:
[NET]: Allow ip_summed to be forwarded as is
Right now Xen has a horrible hack that lets it forward packets with
partial checksums. One of the reasons that CHECKSUM_PARTIAL and
CHECKSUM_COMPLETE were added is so that we can get rid of this hack
(where it creates two extra bits in the sk
On Tue, Mar 27, 2007 at 02:36:48PM +1000, Herbert Xu wrote:
>
> Looks like I forgot to finish the checksum stuff for Xen last time around.
>
> [NET]: Allow partial checksums to be forwarded
Hang on, this only gets rid of half the hack. Let me change this
first so that we can get rid of them all
Herbert Xu wrote:
Hi Dave:
Looks like I forgot to finish the checksum stuff for Xen last time around.
[NET]: Allow partial checksums to be forwarded
Right now Xen has a horrible hack that lets it forward packets with
partial checksums. One of the reasons that CHECKSUM_PARTIAL was added
is so
Hi Dave:
Looks like I forgot to finish the checksum stuff for Xen last time around.
[NET]: Allow partial checksums to be forwarded
Right now Xen has a horrible hack that lets it forward packets with
partial checksums. One of the reasons that CHECKSUM_PARTIAL was added
is so that we can get rid
David Miller wrote:
From: Thomas Graf <[EMAIL PROTECTED]>
Date: Tue, 27 Mar 2007 01:54:51 +0200
This patch adds a new rule action FR_ACT_GOTO which allows
to skip a set of rules by jumping to another rule. The rule
to jump to is specified via the FRA_GOTO attribute which
carries a rule prefe
On Mon, 26 Mar 2007, Joy Latten wrote:
>
> Sending again since one of the email addresses was incorrect.
>
>
>
> Ok, I have made improvements based on James' and Eric's comments.
>
Acked-by: James Morris <[EMAIL PROTECTED]>
> + if (xfrm_id_proto_match(x-
This email lists some known regressions in Linus' tree compared to 2.6.20.
If you find your name in the Cc header, you are either submitter of one
of the bugs, maintainer of an affectected subsystem or driver, a patch
of you caused a breakage or I'm considering you in any other way
possibly involv
On Mon, 2007-03-26 at 14:48 -0700, David Miller wrote:
> From: Eric Paris <[EMAIL PROTECTED]>
> Date: Mon, 26 Mar 2007 17:34:59 -0400
>
> > I'm not at all able to speak on the correctness or validity of the
> > solution,
>
> Neither am I yet :)
>
> > but shouldn't the ipv6 case be a && not an ||
From: Horms <[EMAIL PROTECTED]>
Date: Sun, 11 Feb 2007 12:04:43 +0900
> Hi,
>
> this is a small patch by Janusz Krzysztofik to ip_route_output_slow()
> that allows VIP-less LVS linux director to generate packets originating
> >From VIP if sysctl_ip_nonlocal_bind is set.
>
> In a nutshell, the i
From: Thomas Graf <[EMAIL PROTECTED]>
Date: Tue, 27 Mar 2007 01:54:53 +0200
> The use of nop rules simplifies the usage of goto rules
> and adds more flexibility as they allow targets to remain
> while the actual content of the branches can change easly.
>
> Signed-off-by: Thomas Graf <[EMAIL PRO
From: Thomas Graf <[EMAIL PROTECTED]>
Date: Tue, 27 Mar 2007 01:54:52 +0200
> Rules which match against device names in their selector can
> remain while the device itself disappears, in fact the device
> doesn't have to present when the rule is added in the first
> place. The device name is resol
From: Thomas Graf <[EMAIL PROTECTED]>
Date: Tue, 27 Mar 2007 01:54:51 +0200
> This patch adds a new rule action FR_ACT_GOTO which allows
> to skip a set of rules by jumping to another rule. The rule
> to jump to is specified via the FRA_GOTO attribute which
> carries a rule preference.
>
> Referr
Stephen,
Patch to support the new fib rules features I just posted
on netdev.
Index: iproute2.git/include/linux/fib_rules.h
===
--- iproute2.git.orig/include/linux/fib_rules.h 2007-03-25 22:26:33.0
+0200
+++ iproute2.git/inc
The use of nop rules simplifies the usage of goto rules
and adds more flexibility as they allow targets to remain
while the actual content of the branches can change easly.
Signed-off-by: Thomas Graf <[EMAIL PROTECTED]>
Index: net-2.6.22/include/linux/fib_rules.h
=
Rules which match against device names in their selector can
remain while the device itself disappears, in fact the device
doesn't have to present when the rule is added in the first
place. The device name is resolved by trying when the rule is
added and later by listening to NETDEV_REGISTER/UNREGI
Patches to the fib rules code, not directly connected, see
description of each patch.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
This patch adds a new rule action FR_ACT_GOTO which allows
to skip a set of rules by jumping to another rule. The rule
to jump to is specified via the FRA_GOTO attribute which
carries a rule preference.
Referring to a rule which doesn't exists is explicitely allowed.
Such goto rules are marked wit
Sridhar Samudrala wrote:
I think the check for hw type is missing in e1000_set_tso()
before enabling ipv6 TSO.
e1000_probe() makes sure that NETIF_F_TSO6 is set only if
hw.mac_type > e1000_82547_rev_2. But this is not done in
e1000_set_tso() that gets called when trying to enable TSO
using ethto
On Mon, 2007-03-26 at 17:34 -0400, Eric Paris wrote:
> On Fri, 2007-03-23 at 16:58 -0600, Joy Latten wrote:
>
> > @@ -710,11 +713,20 @@ static struct xfrm_state *__find_acq_cor
> >
> > switch (family) {
> > case AF_INET:
> > + if (x->id.daddr.a4 == saddr
Sending again since one of the email addresses was incorrect.
Ok, I have made improvements based on James' and Eric's comments.
Regards,
Joy
Signed-off-by: Joy Latten<[EMAIL PROTECTED]>
diff -urpN linux-2.6.20.orig/include/net/xfrm.h
linux-2.6.20.patch/include/net/xfrm.h
---
From: "Robert P. J. Day" <[EMAIL PROTECTED]>
Date: Mon, 26 Mar 2007 19:10:03 -0400 (EDT)
>
> Remove the worthless net/sched/Makefile entry for the non-existent
> source file sch_hpfq.c.
>
> Signed-off-by: Robert P. J. Day <[EMAIL PROTECTED]>
Applied, thanks Robert.
I wonder how cruft like this
I think the check for hw type is missing in e1000_set_tso()
before enabling ipv6 TSO.
e1000_probe() makes sure that NETIF_F_TSO6 is set only if
hw.mac_type > e1000_82547_rev_2. But this is not done in
e1000_set_tso() that gets called when trying to enable TSO
using ethtool.
I noticed this problem
Remove the worthless net/sched/Makefile entry for the non-existent
source file sch_hpfq.c.
Signed-off-by: Robert P. J. Day <[EMAIL PROTECTED]>
---
diff --git a/net/sched/Makefile b/net/sched/Makefile
index ff2d6e5..020767a 100644
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -17,7 +17,6
I have made improvements based on James' and Eric's comments.
Regards,
Joy
Signed-off-by: Joy Latten<[EMAIL PROTECTED]>
diff -urpN linux-2.6.20.orig/include/net/xfrm.h
linux-2.6.20.patch/include/net/xfrm.h
--- linux-2.6.20.orig/include/net/xfrm.h2007-03-23 11:01:48.0
-0500
+++
From: Eric Paris <[EMAIL PROTECTED]>
Date: Mon, 26 Mar 2007 17:34:59 -0400
> I'm not at all able to speak on the correctness or validity of the
> solution,
Neither am I yet :)
> but shouldn't the ipv6 case be a && not an || like the ipv4
> case? Isn't this going to match all sorts of things? D
On Sun, 25 Mar 2007, David Miller wrote:
> From: "Ilpo_Järvinen" <[EMAIL PROTECTED]>
> Date: Mon, 26 Mar 2007 00:55:57 +0300 (EEST)
>
> > On Sat, 24 Mar 2007, David Miller wrote:
> >
> > > From: "Ilpo_Järvinen" <[EMAIL PROTECTED]>
> > >
> > > > It is guaranteed to be valid only when !tp->sacked_
On Fri, 2007-03-23 at 16:58 -0600, Joy Latten wrote:
> @@ -710,11 +713,20 @@ static struct xfrm_state *__find_acq_cor
>
> switch (family) {
> case AF_INET:
> + if (x->id.daddr.a4 == saddr->a4 &&
> + x->props.saddr.a4 == dadd
Hello,
> -Original Message-
> From: Sergei Shtylyov [mailto:[EMAIL PROTECTED]
> Sent: Saturday, March 24, 2007 12:49 PM
> To: Mark E Mason
> Cc: [EMAIL PROTECTED]; netdev@vger.kernel.org
> Subject: Re: [PATCH] NAPI support for Sibyte MAC
[snip]
> > @@ -2075,12 +2143,52 @@
> >
Brian Braunstein wrote:
>
> From: Brian Braunstein <[EMAIL PROTECTED]>
>
> Fixed tun/tap driver's handling of hw addresses. The hw address is
> stored in
> both the net_device.dev_addr and tun.dev_addr fields. These fields were
> not
> kept synchronized, and in fact weren't even initialized to t
From: Robert Olsson <[EMAIL PROTECTED]>
Date: Mon, 26 Mar 2007 11:29:04 +0200
> Paul E. McKenney writes:
>
> > Those of use who dive into networking only occasionally would much
> > appreciate this. ;-)
>
> No problem here...
>
> Cheers
> --ro
>
> Ac
From: Alexey Dobriyan <[EMAIL PROTECTED]>
Date: Mon, 26 Mar 2007 19:34:31 +0400
> * d_alloc() in sock_attach_fd() fails leaving ->f_dentry of new file NULL
> * bail out to out_fd label, doing fput()/__fput() on new file
> * but __fput() assumes valid ->f_dentry and dereferences it
>
> Signed-off-
On Mon, Mar 26, 2007 at 10:55:11PM +0200, ahmed wrote:
> On Sun, Mar 25, 2007 at 01:29:29AM -0700, Brian Braunstein wrote:
> > --- linux-2.6.20.4-ORIG/drivers/net/tun.c 2007-03-23
> > 12:52:51.0 -0700
> > +++ linux-2.6.20.4/drivers/net/tun.c2007-03-25 00:44:20.0
> > -070
I had two python programs, server.py and client.py(attached)
With server.py in a kernel 2.6.21-rc5 x86_64 and client.py in the same
machine, server.py get the message.
With server.py in a kerner 2.6.21-rc5 x86_64 and client.py in another
machine, server.py don't get the message.
The same wi
The zeroeth patch was visable on my browser, but the seven patches didn't show
up.
I thought there was a problem with sendmail so turned debug on and retried.
Forget
the second set as they are identical patches.
On Mon, Mar 26, 2007 at 01:47:30PM -0700, Andrew Vasquez wrote:
> BTW: this patc
On Sun, Mar 25, 2007 at 01:29:29AM -0700, Brian Braunstein wrote:
>
> From: Brian Braunstein <[EMAIL PROTECTED]>
>
No need for this line. This line is used when you _forward_ another patch
from others. Signed-off-by is enough
>
> Signed-off-by: Brian Braunstein <[EMAIL PROTECTED]>
>
> ---
>
BTW: this patchset was sent twice to netdev.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Fixed rx checksum bits. Turn on TCP processing for rx checksum.
Fixed max frame length register write. It wasn't getting set
in multi-port system. Set rx buffer queue length properly
for jumbo frames.
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c | 29 +++-
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 3a49fc9..2967c89 100755
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -39,7 +39,7 @@
This PHY support patch was written by Benjamin Li.
Signed-off-by: Benjamin Li <[EMAIL PROTECTED]>
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c | 347 +++--
drivers/net/qla3xxx.h | 33 +-
2 files changed, 335 insertions(+
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c | 18 ++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 9947a8d..631bf9f 100755
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@
This was removed in a previous patch to increase performance, but
caused a transmit error for the 4032 chip.
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx
The proper header length was not being used.
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c |9 ++---
1 files changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index f645a0d..85850d1 100755
--- a/drivers/net/qla3x
Update the rx queue pointer when exiting NAPI poll rather than
at the end of each iteration. Remove unnecessary PCI flushes
that occurred after every write. Now write all regs and
flush once.
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c | 71
On Mon, 2007-03-26 at 13:39 -0600, Joy Latten wrote:
> + if ((err = security_xfrm_policy_delete(pol)) != 0) {
> + xfrm_audit_log(audit_info->loginuid,
> +audit_info->secid,
> +
On Mon, 26 Mar 2007, James Morris wrote:
> On Mon, 26 Mar 2007, Joy Latten wrote:
>
> > Signed-off-by: Joy Latten<[EMAIL PROTECTED]>
>
> This looks ok to me, although I have a couple of minor issues (which
> should probably not stop it being merged):
>
> > + if ((err = securi
On Mon, 26 Mar 2007, Joy Latten wrote:
> Signed-off-by: Joy Latten<[EMAIL PROTECTED]>
This looks ok to me, although I have a couple of minor issues (which
should probably not stop it being merged):
> + if ((err = security_xfrm_policy_delete(pol)) != 0) {
The value of 'err'
On Thu, 2007-03-22 at 20:56 -0400, James Morris wrote:
>On Thu, 22 Mar 2007, Joy Latten wrote:
>> > Perhaps a better semantic would be to fail the entire flush operation if
>> > one of the security checks failed. e.g. loop through for permissions
>> > first, then if all ok, loop through for del
Fixed rx checksum bits. Turn on TCP processing for rx checksum.
Fixed max frame length register write. It wasn't getting set
in multi-port system. Set rx buffer queue length properly
for jumbo frames.
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c | 29 +++-
This PHY support patch was written by Benjamin Li.
Signed-off-by: Benjamin Li <[EMAIL PROTECTED]>
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c | 347 +++--
drivers/net/qla3xxx.h | 33 +-
2 files changed, 335 insertions(+
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c | 18 ++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 9947a8d..631bf9f 100755
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 3a49fc9..2967c89 100755
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -39,7 +39,7 @@
This was removed in a previous patch to increase performance, but
caused a transmit error for the 4032 chip.
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx
The proper header length was not being used.
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c |9 ++---
1 files changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index f645a0d..85850d1 100755
--- a/drivers/net/qla3x
Update the rx queue pointer when exiting NAPI poll rather than
at the end of each iteration. Remove unnecessary PCI flushes
that occurred after every write. Now write all regs and
flush once.
Signed-off-by: Ron Mercer <[EMAIL PROTECTED]>
---
drivers/net/qla3xxx.c | 71
Hello again
one more bug, and seems even more painful, kernel panic...
kernel 2.6.20.3
It is kind of complicated setup:
Init of shaper on ifb0 device
$TC qdisc add dev ifb0 root handle 1: htb default 1000
$TC filter add dev ifb0 parent 1:0 prio 1000 protocol ip u32 match ip dst
0.0.0.0/0 cla
Jeff,
Of the following 7 patches, the first four are bugfixes that we would like to
get into 2.6.21 if possible.
The other three add support for a new PHY and change the driver version. We've
built and tested this using
netdev/upstream 2.6.21-rc3.
Ron Mercer
Signed-off-by: Ron Mercer <[EMAIL PR
* d_alloc() in sock_attach_fd() fails leaving ->f_dentry of new file NULL
* bail out to out_fd label, doing fput()/__fput() on new file
* but __fput() assumes valid ->f_dentry and dereferences it
Signed-off-by: Alexey Dobriyan <[EMAIL PROTECTED]>
---
net/socket.c |7 ++-
1 file changed,
Paul E. McKenney writes:
> Those of use who dive into networking only occasionally would much
> appreciate this. ;-)
No problem here...
Cheers
--ro
Acked-by: Robert Olsson <[EMAIL PROTECTED]>
Signed-off-by: Paul E. McKenney <[EMAIL PROTECTED]> (bu
I build this tree by cloning the current bug fix net-2.6 tree
then merging in all of the net-2.6.22 stuff on top, in the
usual spot:
kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.22.git
I merged in a few of the small "oh shit" type bug fix patches
into the changeset that caused the
On Sat, 24 Mar 2007, Samuel Ortiz wrote:
On Fri, Mar 23, 2007 at 01:14:43PM +0100, Guennadi Liakhovetski wrote:
Below is a patch that fixes ONE
sk_buff leak (maintainer added to cc: hi, Paul:-)). Still investigating if
there are more there.
Are you still seeing the skb cache growing with your
84 matches
Mail list logo
