Hi,
I'm using Solidrun's clearfog-base plarform with Sierra Wireless EM7430 LTE
chipset. I'm running OpenWRT 18.06 with ModemManager feed from
https://gitlab.freedesktop.org/mobile-broadband/mobile-broadband-openwrt
It is taking around 20 seconds for modemanager to bring up the LTE IP interface
Please help with this. What could be the cause of significant MM startup delay?
From: ModemManager-devel On
Behalf Of Amol Lad
Sent: Monday, 19 August 2019 4:05 PM
To: modemmanager-devel@lists.freedesktop.org
Subject: Modemmanager significant startup delay
Hi,
I'm using Solidrun'
en in reliance on it).-Original
Message-
From: Nick
Sent: Monday, 26 August 2019 3:47 AM
To: Aleksander Morgado
Cc: Paul Bartell ;
modemmanager-devel@lists.freedesktop.org; Amol Lad
Subject: Re: Modemmanager significant startup delay
Hey,
FWIW, Testing Paul’s rules on my MC743
Hi,
I'm using Solidrun's clearfog-base plarform with Sierra Wireless EM7430 LTE
chipset. I'm running OpenWRT 18.06 with ModemManager feed from
https://gitlab.freedesktop.org/mobile-broadband/mobile-broadband-openwrt
mmcli is not reporting stored firmware images but same can be retrieved using
Hi Enrico,
Can you please share what you did to address this?
I think this is very much desired enhancement especially when the signal is not
that great and there and frequent disconnections/reconnections occurring.
Thanks
Amol
The information in this email communication (inclusive of attachm
Hi Aleksander,
If you consider this ok, then can you please update the modemmanager and qmicli
to the latest release in openwrt feed? They are currently at 1.10.0 and 1.22.4
respectively.
Thanks
Amol
The information in this email communication (inclusive of atta
Hi,
Below patch allows user to configure roaming in /etc/config/network along with
other parameters such as apn. This patch is generated from Mobile Broadband
OpenWRT git
(https://gitlab.freedesktop.org/mobile-broadband/mobile-broadband-openwrt).
I've tested it in my EM7455 setup.
Thanks
Amol
Hi Aleksander,
Regarding modemmanager.proto file @
https://gitlab.freedesktop.org/mobile-broadband/mobile-broadband-openwrt/blob/master/modemmanager/files/modemmanager.proto
Did you mean "while [ $idx -le $bearercount ];" in below function instead of "
while [ $idx -ge $bearercount ];" ?
modem
Hi,
Below is a sample received SMS. I'm in timezone "+0530" but the timestamp only
shows "+05". I've attempted to fix this in master. Thus, if the timezone field
notes not include minutes then it will be shows as "+hh" and if it includes
minutes then it will be shown as "+hhmm"
# mmcli -s 1
of any viruses
and/or any action or lack of action taken in reliance on it).-Original
Message-
From: Aleksander Morgado
Sent: Wednesday, 18 September 2019 6:07 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: [PATCH] Include minutes in SMS timezone field
Hey Amol
On Wed, S
not limited to, damages sustained as a result of any viruses
and/or any action or lack of action taken in reliance on it).-Original
Message-
From: Aleksander Morgado
Sent: Thursday, 19 September 2019 1:16 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: [PATCH] Include minutes
Hi Nick,
When do you think the merge will be done?
Amol
From: Nick B
Sent: Monday, 9 September 2019 6:02 PM
To: Aleksander Morgado
Cc: Amol Lad ; ModemManager (development)
Subject: Re: modemmanager/qmicli openwrt feed update
Hey everyone!
The final missing piece before a merge might be
Hi,
Sierra EM7455/7430 provide support for dual SIM cards. Current sim can be found
out using AT!UIMS? at command. This will return "0" or "1" depending on which
sim is active. Similarly, SIM 0 can be made active using AT!UIMS=0 and SIM 1
using AT!UIMS=1.
Now how to achieve this SIM switching
Hi,
I’m using almost the latest modemmanager from master (commit hash:
0a85254d1765db6e55770d36e24b1e6349e789f4). I started noticing that the
“bytes-rx” and “bytes-tx” statistics are never getting updated even though
there is regular traffic (say ping). I’m not sure if anything has changed in
Hi,
I'm using almost the latest modemmanager from master (commit hash:
0a85254d1765db6e55770d36e24b1e6349e789f4). When starting network scan using
mmcli, the availability field is always "unknown" whereas for qmicli the
"Status" is reported with more details. Please advise if this is desired
b
t; InDiscards = '0'
>>>>>> InErrors = '0'
>>>>>> InOctets = '0'
>>>>>> InPackets = '0'
>>>>>> OutOctets = '0'
>>>>>> OutPacke
not limited to, damages sustained as a result of any viruses
and/or any action or lack of action taken in reliance on it).-Original
Message-
From: Aleksander Morgado
Sent: Thursday, 10 October 2019 4:09 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: “bytes-rx” and “bytes-tx
urn email and then delete all
instances of this email from your system. 4RF Limited will not accept
responsibility for any consequences associated with the use of this email
(including, but not limited to, damages sustained as a result of any viruses
and/or any action or lack of action taken i
Hi Aleksander,
Is this behaviour ("NoEffect" error) specific to Quectel EG06-E modem or you
think it's a general issue across all modems?
I would really love to test your changes but have no APN with IPv6 support ☹
Amol
The information in this email communication (inclusive of attachments) is
This rule is already in MM 1.12.0. You had to apply it separately?
root@OpenWrt:/lib/udev/rules.d# cat 77-mm-sierra.rules
# do not edit this file, it will be overwritten on update
ACTION!="add|change|move|bind", GOTO="mm_sierra_end"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1199", GOTO="mm_sierra"
GOT
Sorry for basic question. How to you set ip_type to ANY in OpenWrt conf
(below). I tried : option iptype 'any' but it did not work
config interface 'wwan'
option device
'/sys/devices/platform/soc/soc:internal-regs/f10f8000.usb3/usb5/5-1'
option proto 'modemmanager'
option
---Original
Message-
From: Nick B
Sent: Friday, 15 November 2019 9:19 AM
To: Amol Lad
Cc: Andreas Fett ; modemmanager-devel@lists.freedesktop.org
Subject: Re: Regression regarding ip_type when updating from 1.10.4 to 1.12.0
I think you can just l
r any action or lack of action taken in reliance on it).-Original
Message-
From: Aleksander Morgado
Sent: Friday, 15 November 2019 2:37 PM
To: Amol Lad
Cc: modemmanager-devel@lists.freedesktop.org
Subject: Re: MM_BEARER_IP_FAMILY_ANY broken in MM 1.12.0?
Hey
>
> I’m using openwrt-ma
and then delete all
instances of this email from your system. 4RF Limited will not accept
responsibility for any consequences associated with the use of this email
(including, but not limited to, damages sustained as a result of any viruses
and/or any action or lack of action taken in relianc
the use of this email
(including, but not limited to, damages sustained as a result of any viruses
and/or any action or lack of action taken in reliance on it).-Original
Message-
From: Aleksander Morgado
Sent: Friday, 15 November 2019 6:57 PM
To: Amol Lad
Cc: modemmanager-devel@lists.
Hi Aleksander,
It seems "mmcli -m 0 -firmware-list" is crashing modemmanager. There is no
debug output also in -debug mode. Please see last two commands in bottom of
this email. I'm running MM 1.12.0 (in openwrt)
root@OpenWrt:/# mmcli -m 0
General |
ou have received this email in error,
please notify the sender immediately by return email and then delete all
instances of this email from your system. 4RF Limited will not accept
responsibility for any consequences associated with the use of this email
(including, but not limited t
Hi,
I'm using MM 1.12.0 in openwrt system [EM7565 in MBIM mode].
When MM starts , we see below Client ID allocations.
Nov 21 08:50:00 OpenWrt [9084]: [/dev/cdc-wdm0] Allocating new client ID...
Nov 21 08:50:00 OpenWrt [9084]: [/dev/cdc-wdm0] Registered 'dms' (version 1.0)
client with ID '3'
Nov
_free_full (self->priv->qmi_clients, g_free);
self->priv->qmi_clients = NULL;
g_clear_object (&self->priv->qmi_device);
#endif
From: Amol Lad
Sent: Thursday, 21 November 2019 2:52 PM
To: modemmanager-devel@lists.freedesktop.org
Subject: CIDs not released when MM stop
Hi,
I'm using Sierra EM7565 in latest openwrt with MM 1.12.0. When I start a
connection using "-simple-connect" command then the "initial bearer" used is
the APN which was last made active. This breaks in some private APNs which do
not recognise that APN. Please refer to below command sequence
Hi,
I'm using Sierra EM7575 in OpenWrt and just to test release 1.12.2, I changed
modemmanager's manifest file in OpenWrt to use release 1.12.2. However, I get
below errors on startup. Is this normal? Or I need to enable config option(s)
for Sierra chipset?
Dec 12 08:01:43 OpenWrt [14006]: M
Hi,
I'm testing mm 1.12.2 + libqmi 1.24.2 on sierra EM7565 (openwrt). Please see
last line of log. Is this ok?
I do not see this in mm 1.12.0 + libqmi 1.24.0
Dec 13 15:51:38 OpenWrt [5904]: [/dev/cdc-wdm0] Enabling QMI indications via
MBIM...
Dec 13 15:51:38 OpenWrt [5904]: [/dev/cdc-wdm0] ena
: Aleksander Morgado
Sent: Friday, 13 December 2019 11:07 PM
To: Amol Lad
Cc: modemmanager-devel@lists.freedesktop.org
Subject: Re: Cannot send message: QMI service 'pdc' version '1.15' required,
got version '1.0'
>
> > I’m testing mm 1.12.2 + libqmi 1.24.2 on s
Can we see the output of AT!USBCOMP? AT command before and after the issue?
root@OpenWrt:/# mmcli -m 0 --command=AT!ENTERCND=\"A710\"
response: ''
root@OpenWrt:/# mmcli -m 0 --command=AT!USBCOMP?
response: 'Config Index: 1
Config Type: 3 (Generic)
Interface bitmask: 100D (diag,nmea,modem,mbim
Thank you for your efforts!
Please also update OpenWrt with new release.
Thanks again.
Amol
The information in this email communication (inclusive of attachments) is
confidential to 4RF Limited and the intended recipient(s). If you are not the
intended recipient(s), please note that any use,
Hi,
I'm noticing a (minor) issue in MM 1.12.4 release. The operator code is "53005"
but leading "0" is missing in MNC field when displayed using -location-get
command as below. I've noticed that if there are one or more leading zeros then
both MCC and MNC do not report it. I've a test APN with
Hi,
It will be more useful to show correct carrier-configuration and revision.
Currently it shows "default" and "-" for revision. Any suggestion how this can
be done? Also find below !IMPREF AT Command which gives the carrier
configuration/revision.
Thanks
Amol
# mmcli -m 0 -K
modem.dbus-path
Hi,
In some private APNs, location assistance servers are not reachable or not
needed. Is there a way to disable location assistance?
Thanks
Amol
# mmcli -m 0 --location-status
Location | capabilities: 3gpp-lac-ci, gps-raw, gps-nmea, agps-msa,
agps-
: Amol Lad
Sent: Monday, 9 March 2020 1:43 PM
To: ModemManager (development)
Subject: Location Assistance Servers
Hi,
In some private APNs, location assistance servers are not reachable or not
needed. Is there a way to disable location assistance?
Thanks
Amol
# mmcli -m 0 --location-status
or lack of action taken in reliance on it).-Original
Message-
From: Aleksander Morgado
Sent: Thursday, 12 March 2020 3:48 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: Location Assistance Servers
Hey Amol,
>
>
> Is there any way to disable XTRA location ass
Hi Aleksander,
Please advise when do you plan to update Openwrt/modemmanager to 1.14.0 release
Thanks
___
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
Hi Aleksander,
After commenting PKG_FIXUP:=autoreconf, I'm getting below error:
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash
/home/alad/openwrt/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/ModemManager-1.14.0/missing
aclocal-1.16 -I m4
/home/alad/openwrt/build_dir/target-arm_cortex-a9+vfp
I commented those two lines (and also PKG_FIXUP:=autoreconf) and build is
successful.
I'm not sure why those lines are there. Maybe, Nick will have some idea.
Amol
-Original Message-
From: Aleksander Morgado
Sent: Tuesday, 7 July 2020 2:04 PM
To: Amol Lad
Cc: Nick ; ModemMa
Hi Aleksander,
I'm testing 1.14.0 and finding that libmbim has significantly slowed down MM
startup. I'm using EM7565 in MBIM mode. Please see below snippets from log
which highlight the delay. As you can see "couldn't load carrier config;
couldn't load SUPL; assistance data" are causing this s
Sorry, logs got mingled in previous post. Please find it attached
-Original Message-
From: Amol Lad
Sent: Tuesday, 7 July 2020 5:37 PM
To: ModemManager (development)
Subject: libmbim 1.24.0 slowing down MM startup
Hi Aleksander,
I'm testing 1.14.0 and finding that libmbi
July 2020 6:32 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: libmbim 1.24.0 slowing down MM startup
Hey,
>
> I'm testing 1.14.0 and finding that libmbim has significantly slowed down MM
> startup. I'm using EM7565 in MBIM mode. Please see below snippet
Hi Aleksander,
Did you got a chance to see those logs? Please let me know if any other
information is needed.
Amol
From: Amol Lad
Sent: Wednesday, 8 July 2020 11:41 AM
To: Aleksander Morgado
Cc: ModemManager (development)
Subject: RE: libmbim 1.24.0 slowing down MM startup
Hi Aleksander
Thanks a lot Aleksander,
I've verified and the fix works!
Thanks again
Amol
-Original Message-
From: Aleksander Morgado
Sent: Friday, 10 July 2020 1:58 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: libmbim 1.24.0 slowing down MM startup
Hey Amol,
> > Di
Hi,
Does ModemManager/libqmi/libmbim support Sierra wireless EM9190 module? I'm not
sure if anyone actually got a chance to test EM919X with MM. Please advise.
Thanks
Amol
___
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
htt
Thanks Aleksander,
What is the recommended MM version to test 5G in this module (QMI & MBIM mode)?
Also what kernel version should I use (for qmi_wwan & cdc_mbim drivers)?
Thanks
Amol
-Original Message-
From: Aleksander Morgado
Sent: Thursday, 17 June 2021 6:50 PM
To: Amol
Thanks. I'll share the output as soon as I'll receive the device.
I think the device IDs needs to be inserted in qcserial.c also?
-Original Message-
From: Aleksander Morgado
Sent: Friday, 18 June 2021 2:22 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: EM91
Hi,
I'm testing MM 1.18.2 release and finding that the supported bands and current
bands are shown empty. I'm using EM7511 modem in MBIM mode in OpenWRT framework
(with QMI over MBIM enabled). The bands are displayed correctly in an older MM
release (1.12.6). Please let me know what additional
| paths: /org/freedesktop/ModemManager1/Bearer/1
-Original Message-
From: Aleksander Morgado
Sent: Saturday, 2 October 2021 3:50 AM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: MM 1.18.2 Supported Bands and Current Bands are empty
Hey,
>
> I'm
/org/freedesktop/ModemManager1/Bearer/1
-----Original Message-
From: Amol Lad
Sent: Saturday, 2 October 2021 6:49 AM
To: 'Aleksander Morgado'
Cc: ModemManager (development)
Subject: RE: MM 1.18.2 Supported Bands and Current Bands are empty
Please find it below:
Hi Aleksander,
My apologies. It seems my MM got built without QMI_MBIM_QMUX_SUPPORTED flag
hence below issues. After re-building MM with this flag, I can see "Channel"
and "Modes" sections correctly.
Thanks
-Original Message-
From: Amol Lad
Sent: Monday, 4 Oct
Hi,
I'm finding that ModemManager crashes when ip-type is ipv4v6 in -simple-connect
in MBIM mode. After investigation, I found that below seems to fix the crash
diff --git a/src/mm-bearer-mbim.c b/src/mm-bearer-mbim.c
index d509929..bf66c5d 100644
--- a/src/mm-bearer-mbim.c
+++ b/src/mm-bearer-m
Hi,
LN920 is a new modem from Telit. Any suggestions, how can I add compositions
rules for this modem in plugins/77-mm-telit-port-types.rules?
lsusb output is available here:
https://www.spinics.net/lists/linux-usb/msg216555.html
The USB compositions are mentioned as below:
0x1060: DIAG + ADB
Hi Daniele,
I'm patched my MM 1.18.2 with your MR (LN920 Initial Support) and testing LN920
in MBIM mode. I'm noticing that the "supported" and "current" bands are not
shown in "mmcli -m 0" output and below error is seen in the logs:
[modem0] couldn't load supported bands: Could not find 4G b
tended): '1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20,
25, 26, 28, 29, 30, 38, 39, 40, 41, 42, 43, 48, 66, 71'
Thanks
Amol
From: Amol Lad
Sent: Monday, 11 October 2021 6:34 PM
To: 'Daniele Palmas' ; 'ModemManager (development)'
Subject: LN920: MBIM Bands not
> Anyway, it would be better also to fix #BND=? management for those
> setups where qmi is not used.
>
I've started on this and shall submit a MR in a day or two..
Hi,
I've raised a MR:
https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/merge_requests/646
This fixes #BND=? For LN920. I've tested with LN920 and looks ok.
-Original Message-
From: Daniele Palmas
Sent: Tuesday, 12 October 2021 2:50 PM
To: Amol Lad
Cc: Mo
Hi,
We're not getting network time using mmcli -time command. I'm not sure if it is
something specific to my setup or an issue. However, I do get correct network
time when using Sierra modem with the same SIM card
(I'm using MM 1.18.2 release)
Please advise
Amol
# mmcli -m 0 --time
and send across
Thanks
Amol
-Original Message-
From: Daniele Palmas
Sent: Saturday, 6 November 2021 12:12 AM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: Telit LN920: Incorrect Network Time Reported
Hi Amol,
Il giorno ven 5 nov 2021 alle ore 04:12 Amol Lad ha scritto:
&g
e)
-Original Message-
From: Aleksander Morgado
Sent: Monday, 8 November 2021 3:04 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: SIM Card PIN Change Timeout (MM 1.18.2)
Hey,
>
>
> If we attempt to change SIM Card PIN when the SIM is in locked state then
> "
n searching?
-Original Message-
From: Aleksander Morgado
Sent: Monday, 8 November 2021 3:51 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: SIM Card PIN Change Timeout (MM 1.18.2)
Hey,
> Same problem is observed with Telit LN920 also so I don't this it's a
>
syncReadyCallback)after_change_update_lock_info_ready,
-ctx);
+handle_change_pin_context_free (ctx);
}
Thanks
Amol
-Original Message-
From: Aleksander Morgado
Sent: Monday, 8 November 2021 5:25 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: SIM Card PIN Change Timeout (MM 1.18.2)
Hey,
On Mon,
The problem is coming in QMI also but logs are a bit different:
root@AprisaLTE:/# mmcli -i 1 --change-pin=1234 --pin=
error: couldn't change PIN code in the SIM: 'Timeout was reached'
Logs are below:
debug 2021-11-08T15:20:38+00:00 : [1636384838.121620] [modem0/sim1]
changing PIN...
debug
Hi,
I'm observing that in few cases (MM 1.18.2) that --simple-connect returns
immediately in QMI mode without waiting for the timeout. No such premature exit
is observed in MBIM i.e. MBIM mode works fine.
It's easily reproducible in my setup.
1] Successfully connect bearer first and then run f
connected)
Amol
info 2021-11-30T09:27:01+00:00 : [modem0] state changed (connecting ->
connected)
-Original Message-
From: Aleksander Morgado
Sent: Tuesday, 30 November 2021 2:24 PM
To: Amol Lad ; Daniele Palmas ; Carlo
Lobrano
Cc: ModemManager (development)
Subjec
Hi Aleksander,
When you are planning to release 1.18.8?
Thanks
Amol
Hi Aleksander,
I can test it on 21st April as out of town at the moment. ( EM7565, Telit LN920
under openwrt platform)
Amol
From: ModemManager-devel on
behalf of Aleksander Morgado
Sent: Friday, April 15, 2022 6:26 PM
To: Amol Lad
Cc: ModemManager
Hi,
We're have mechanism to send a SMS using ModemManager APIs. I was sending SMS
from ModemManager but the receiving end not receiving it. Everything looked
good; no error reported. Finally, the issue was the network operator had SMS
feature disabled for the SIM card I was using. Thus, no SMS
Hi,
There seems a small issue in "mmcli -m 0 --messaging-list-sms -K" reporting (in
MM 1.18.6). When the number of SMS is >= 100 then closing square bracket for
the message index is missing in the output as shown below (see index 100 and
above, closing square bracket is missing). Please advise
Yes, definitely!
-Original Message-
From: Aleksander Morgado
Sent: Thursday, 28 April 2022 1:46 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: messaging-list-sms issue
Hey!
>
> There seems a small issue in "mmcli -m 0 --messaging-list-sms -K" reporting
Hi,
I've observed this issue in MM 1.18.6. If I create and send SMS from
ModemManager and then delete the message, ModemManager reports message
successfully deleted but actually no QMI command is sent to the modem to delete
the message. As a result, if I restart ModemManager, then that "deleted
I've created the issue. Just a note that I was testing with EM7565 in MBIM mode.
Thanks
-Original Message-
From: Aleksander Morgado
Sent: Wednesday, 4 May 2022 1:16 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: Sent SMS not getting deleted from Modem
Hey,
On Wed
NULL);
mbim_device_command (ctx->device,
message,
10,
NULL,
(GAsyncReadyCallback)sms_delete_set_ready,
task);
mbim_message_unref (message);
Hi,
I recall there was some discussion about this here sometime back. Is there a
way to see & configure NR5G bands in Sierra EM919x modems? We do not see these
bands in below output. (I'm using MM 1.18.8)
Thanks
# mmcli -m 0
--
General | p
Hi,
An APN support "PAP" authentication with a username and password. In mmcli
-simple-connect, we can specify "allowed-auth", key/value pair. I'm finding
that if "allowed-auth=pap" then APN connects OK but if "allowed-auth=pap|chap",
following error is returned:
info 2022-06-29T03:51:34+00:00
if APN supports "PAP Only" authentication then
"allowed-auth=pap|chap" does not connect and returns error. It works fine if
"allowed-auth=pap"
(I'm trying with MM 1.18.8 & EM7565 in MBIM mode)
Thanks
Amol
From: Amol Lad
Sent: Wednesday, 29 June
Hi,
Well, this sounds trivial but I'm having problem in using mmcli -simple-connect
in a shell script when username or password contains "space" or double-quote
---
#!/bin/sh
apn="internet"
username="abc 123"
password="abc\" 456"
cliauth="pap"
iptype=IPv4
mmcli -m 0
--simple-connect="apn=$ap
I generally run into similar situation when my SIM card runs out of money. Do
you want to try topping-up SIM card and see if ping is successful?
Amol
From: ModemManager-devel On
Behalf Of Filip Kubicz
Sent: Friday, 15 July 2022 4:14 PM
To: modemmanager-devel@lists.freedesktop.org
Cc: Kamil Sro
Please try below (skip dns resolution)
wget
http://193.63.62.31/sites/default/files/publications/civic_renewal_forms.zip
From: Filip Kubicz
Sent: Friday, 15 July 2022 6:29 PM
To: Amol Lad
Cc: modemmanager-devel@lists.freedesktop.org; Kamil Sroka
Subject: Re: Linux system cannot use the data
Please also try downloading a test file as below and see the result. Does it
download any file at all?
wget http://speedtest.ftp.otenet.gr/files/test10Mb.db
From: Filip Kubicz
Sent: Friday, 15 July 2022 5:28 PM
To: Amol Lad
Cc: modemmanager-devel@lists.freedesktop.org; Kamil Sroka
Subject
Also, one thing I noticed in mmcli-all-log.info. It might not be related to
your problem though.
MTU from the carrier is 1360 but wwan0 MTU is set to 1500. It must be set to
the MTU received from the carrier.
-Original Message-
From: Amol Lad
Sent: Friday, 15 July 2022 6:39 PM
To
Hi Daniele,
Can we use latest MM 1.18.10 release to test Telit FN990 (USB 3.1 host
interface) or we should use git main? Is this chip now fully supported in MM?
Thanks
Amol
Hi Daniele,
I'm trying Telit FN990 with MM 1.20.2 release and "supported" and "current"
modes always report "4g" in MBIM mode. I believe it's reported correctly in
QMI. It seems not all +WS46 combinations are supported in MBIM.
Modes | supported: allowed: 4g; preferred: none
Thanks Daniele,
I'll test the changes in first week of Jan when I'm back from holidays.
Have a good break!
-Original Message-
From: ModemManager-devel On
Behalf Of Daniele Palmas
Sent: Wednesday, 28 December 2022 8:55 PM
To: Aleksander Morgado
Cc: ModemManager (developme
Hi,
I get the following error when enabling NMEA in FN990 with MM 1.20.4 (It comes
with 1.18.6 as well). I do not recall seeing this with Telit LN920 so looks
like this is something FN990 specific. Please advise. (I'm using MBIM)
# mmcli -m "$modem" --location-enable-gps-nmea
error: couldn't se
Thanks Daniele,
I've raised a ticket with the Telit tech support.
Amol
-Original Message-
From: Daniele Palmas
Sent: Monday, 9 January 2023 8:31 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: Telit FN990: MM 1.20.4: mmcli --location-enable-gps-nmea reporting
erro
Hi Aleksander,
I've tried with MM 1.20.4 and also 1.18.8 but it seems the timeout is always
"60 seconds" even if a larger --timeout is provided to mmcli --simple-connect
Any suggestion will really help. I landed into this issue because here a
network on roaming is taking around 90 seconds to re
se {
ctx->max_try_time = 10;
ctx->remaining_tries_cdma = 6;
ctx->remaining_tries_3gpp = 6;
}
From: Amol Lad
Sent: Monday, 16 January 2023 10:30 AM
To: ModemManager (development)
Subject: mmcli "--timeout=[SECONDS]" does not work with --simple-connect
Hi Aleksander,
I'm trying on MM 1.20.4 and noticing that AT+C5GREG? (and also AT+CREG?) do not
report any output when called from mmcli.
# mmcli -m 0 --command=AT+C5GREG?
response: ''
# mmcli -m 0 --command=AT+CREG?
response: ''
# mmcli -m 0 --command=AT+C5GREG=?
response: '+C5GREG: (0-2)'
+C5G
--Original Message-
From: Aleksander Morgado
Sent: Friday, 3 February 2023 3:01 PM
To: Amol Lad
Cc: ModemManager (development)
Subject: Re: +C5GREG? does not report any output from mmcli
>
> I'm trying on MM 1.20.4 and noticing that AT+C5GREG? (and also AT+CREG?) do
> no
Hi Aleksander,
How is the initial-attach-ip-type decided in the NM MR you shared? I've seen in
a network in New Zealand where initial-attach-iptype has to be IPV4 and then it
can be changed to IPV4V6 during connection establishment.
Also, modem might have already gone through registration proce
Hi,
Does ModemManager support SIM application tool kit with proactive SIM commands?
My assumption is most of these SIM application tool kit commands should be
handled by the modem but I'm unclear what is the role of host CPU /
ModemManager in these commands? For example, many SIMs support multi
>> The Twilio Super SIM will send a Proactive Command NAA Initialization and
>> Full File Change Notification to the terminal on the IMSI change. Some
>> modems, like the Quectel BG95 or EC25 will send a URC if
>> +QUSIM: 1
>> if it is a USIM and
>> +QUSIM: 0
>> if it's a regular SIM
>> no idea
Hi Aleksander,
I'm facing a strange issue. I've received a new batch of Sierra EM7455 modems
and trying to update firmware in the modem and I get following error message:
# qmi-firmware-update -t /dev/ttyUSB0 -U SWI9X30C_02.33.03.00.cwe
SWI9X30C_02.33.03.00_VERIZON_002.079_001.nvu
finalizing do
d]
[08 Nov 2023, 03:56:49] [Debug] [qfu,qdl-message] received write-unframed-rsp
[08 Nov 2023, 03:56:49] [Debug] [qfu,qdl-message] status: 134
[08 Nov 2023, 03:56:49] [Debug] [qfu,qdl-message] sequence: 61
From: Amol Lad
Sent: Tuesday, November 7, 2023 11:05 AM
To
Hi,
We getting connection disconnect randomly with below log from MM. We do have a
way to recover from it but is there a way to know the cause of disconnect? Such
as whether it is "network initiated disconnection" or "modem initiated". Any
pointers in this regard will be helpful (to find out t
1 - 100 of 104 matches
Mail list logo
