the same operating system and same firmware works fine
when I connect to a wpa2 enabled ap with an SSID without a space
if that is any help
Tom Smyth
On Wed, 17 Apr 2019 at 01:12, Tom Smyth wrote:
>
> Hello All,
> I tried out 6.5 and tried joining a network with a space in the SS
Thanks Stefan... i will use that debug tip next time im on that site... i
didnt setup the ap (spaces inssid ) so had little opportunity to debug on
ap side
Thanks again
On Wednesday, 17 April 2019, Stefan Sperling wrote:
> On Wed, Apr 17, 2019 at 01:12:12AM +0100, Tom Smyth wrote:
> &
... and
vice versa on the other
end ...
I hope this helps
Tom Smyth
On Wed, 17 Apr 2019 at 17:49, Martin Got wrote:
>
> How to use 'stunnel' in client mode to accept connections on pty from local
> programs like 'ppp' instead of 'accept=IP:PORT'?
>
&g
enable it ?
--
Kindest regards,
Tom Smyth
Theo, Nick, Stuart,
thanks for your feedback on my request...I see where you all are
comming from...
I suppose I cant impose my personal preferences on the entire community :)
I appreciate the time you took to consider it
All the best,
Tom smyth
On Thu, 18 Apr 2019 at 17:01, Stuart Henderson
ne # Do not send any route updates
> neighbor $spam_rs1
> neighbor $spam_rs2
> }
>
> group "internalnet" {
> remote-as $myAS
> multihop64
> neighbor$site3
> local-address $site2
> setnexthop self
> tcp md5sig password password1234
> }
>
>
--
Kindest regards,
Tom Smyth.
both cdn.openbsd.org and fastly.cdn
it is probably just that there are no patches available but I was wondering
is there possibly a file missing that would just say no patches needed
Thanks
Tom Smyth
--
Kindest regards,
Tom Smyth.
Hello just a quick update
syspatch when run on an upgraded 6.5 system ... nolonger
reports ftp 404 file not found ... and seems to behave
in a similar manner as 6.4 and before ...
Thanks
Tom Smyth
On Thu, 25 Apr 2019 at 01:46, Tom Smyth wrote:
>
> Hello
> Minor feedback, that w
annot find the
> > necessary module needed, nor how to load it in a proper manner.
> > Any hint is well appreciated.
> > Best Regards,Strahil Nikolov
>
> Kernel modules don't exist under OpenBSD to ensure security, so don't
> go there. Communication with host is probably best done through the
> serial console. Take a look at the boot.conf(8) manpage.
>
--
Kindest regards,
Tom Smyth.
sli9RaIu/2LLwfZOQ6zMK1uleUwEAyeBxvoV2onST
> Q0qLG5L7nAGxZJEJl7r1pKkYzAfL7Ak=
> =BQ3J
> -END PGP SIGNATURE-
>
--
Kindest regards,
Tom Smyth.
Can you define "great desktop experience" ?
what window managers have you tried on OpenBSD,
there are are a few included in base..and you can also load more with
pkg_add
for ease of use / transitioning from windows ..I find xfce quite nice...
All the Best,
Tom Smyth
On Tue, 7 M
mes, i simply do
>
> $ firefox
>
> and leave the terminal open in case i want to look at the error messages.
> Sometimes, i type
>
> $ firefox & exit
>
> which is shorter.
>
> > or do you normally do something else that I've totally overlooked?
>
> No. The only program is start by clicking the mouse is xterm(1).
>
> Yours,
> Ingo
>
--
Kindest regards,
Tom Smyth.
n we might see those
> out in the mirrors.
>
> I also suppose in the same vein, I could be learning how to pull the
> ports tree and build what I need that way :-)
>
> Thanks!
>
--
Kindest regards,
Tom Smyth.
he cost of the hardware or I can purchase them off amazon and have them
> shipped directly to you and/or your preferred devs.
>
> Thanks for all you guys do,
>
>
> Ryan
>
--
Kindest regards,
Tom Smyth.
nstable, high latency (result of low price :). The best would
> be a short installation path to get a listening sshd and end the
> installation with shell login.
>
> Thanks for any hint
> Rodrigo
>
>
--
Kindest regards,
Tom Smyth.
one noted this bugs before: are there no new people
> installing OpenBSD? Or it is a problem only with VMWare?
>
> > What ESXi version are you running ?
>
> No idea. I must ask the hoster.
>
> > What disk controller are you showing to OpenBSD ?
>
> sd0
>
> Thanks
> Rodrigo
>
>
--
Kindest regards,
Tom Smyth.
; spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
> vmm0 at mainbus0: SVM/RVI
> umass0 at uhub0 port 3 configuration 1 interface 0 "SanDisk Cruzer Glide"
> rev 2.00/1.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd0: 29952MB, 512 bytes/sector, 61341696 sectors
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro Devices
> product 0x7900" rev 2.00/0.18 addr 2
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (d3fbbb47f1a19759.a) swap on sd0b dump on sd0b
>
>
>
>
> Russell P. Sutherland Email: russell . sutherland @ utoronto
> dawt ca
> Network Engineer, I+TS Voice: +1.416.978.0470
> 4 Bancroft Ave., Rm. 102 Cell: +1.416.803.0080
> University of TorontoFax: +1.416.978.6620
> Toronto, ON M5S 1C1
>
>
--
Kindest regards,
Tom Smyth.
mpact-flash-firewall/
I hope this helps
Tom Smyth
On Tue, 4 Jun 2019 at 20:31, Mogens Jensen
wrote:
> I'm going to build a router for use in a remote location, and I have
> chosen OpenBSD 6.5 for the task. Unfortunately, it's not possible to
> protect the router with an UP
there is also an option for setting fsck to approve fixes without a prompt
..
but I cant think of it off the top of my head... and this would be useful
to set on your routers also
On Tue, 4 Jun 2019 at 21:05, Tom Smyth wrote:
> Hi Mogens,
>
> there are a number of threads on th
veil does not like ro /etc.
>
> HTH,
> --
> Before enlightenment - chop wood, draw water.
> After enlightenment - chop wood, draw water.
>
> Marko Cupać
> https://www.mimar.rs/
>
>
--
Kindest regards,
Tom Smyth.
On 6/22/19 7:23 AM, Frank Beuth wrote:
> I wonder if there is a way to have Ansible build a custom
> autoinstall.conf (using templates) and insert it into bsd.rd immediately
> prior to uploading.
I use elfrdsetroot from upobsd to do something along these lines
$ pkg_info upobsd
Information for i
sync with two directories (the same
> directories, mind you) and not -a? Is there an openrsync.core anywhere
> whose backtrace you can get?
>
> Can you run with - and paste your exact invocation? And again with
> --rsync-path openrsync as well?
>
> Also, can you tail /var/log/messages to see if there's anything in there?
>
--
Kindest regards,
Tom Smyth.
v 0x00
pci2 at ppb1 bus 2
Im running OPENBSD 6.5 Current as of 05/07/2019 (5th of July)
I have tested the same configuration with Debian linux guest and the
Network cards are recognised and connect to the network fine ...
Does any one have any suggestions on that unable to map interrupt erro
seems to
resolve this issue
Thanks again Jonathan for your tip it really helped me
Tom Smyth
now the Card can be fully passed through to OpenBSD.. (PF (physical
function) )
Thanks to all, Im just writing this up on the list incase someone else
encounters the issue
On Fri, 5 Jul 2019 at 22
ets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 0.141/4.107/428.184/30.197 ms
I hope this info helps other OpenBSD SR-IOV users...
--
Kindest regards,
Tom Smyth.
Roman has, a nice mail setup on his blog that
describes sending mails without exec IIRC
https://www.romanzolotarev.com/
another alternative is to use postifx and maildrop folders or postdrop
folder ... I hope this helps
Tom Smyth
On Wed, 10 Jul 2019 at 00:31, Kevin Chadwick wrote:
>
>
>/etc/openvpn/openvpn1.conf
echo daemon openvpn >>/etc/openvpn/openvpn1.conf
echo #tls-auth /etc/openvpn/private/tlsauth.key >>/etc/openvpn/openvpn1.conf
echo mlock >>/etc/openvpn/openvpn1.conf
I have tried tcp_nodelay, etc but i get a warning about it not being
supported
by the kernel at run time ...
any tips would be appreciated...
Tom Smyth
holding up the kernel)
no difference in result
when I run openvpn on centos in a similar
setup and hardware, but the small packet latency /jitter issue does not
happen.
I have attached the dmesg also
Thanks
Tom Smyth
On Thu, Sep 29, 2016 at 2:43 PM, Tom Smyth
wrote:
> Hi Lads,
>
&
ice cannot connect.
Is it possible to do a mixed mode?
Also, is powersave working in hostap mode yet?
Thanks,
Tom
athn0 at pci5 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 16
athn0: AR9280 rev 2 (2T2R), ROM rev 22, address xx:xx:xx:xx:xx:xx
On 15/01/17 20:13, Stefan Sperling wrote:
> On Sun, Jan 15, 2017 at 01:53:41PM +0000, Tom Murphy wrote:
>> Hi,
>>
>> I was wondering if OpenBSD had a way to do mixed b/g/n mode with hostap?
>> Recently 802.11n support was added for athn(4). I have 4 802.11n devices,
flowcontrol )
dev.em.X.fc:3
dev.igb.X.fc:3
dev.ix.X.fc:3
any pointers would be appreciated.
--
Kindest regards,
Tom Smyth
code?
Thanks,
Tom
On Wed, Jan 25, 2017 at 10:39:08AM +0100, Stefan Sperling wrote:
> On Tue, Jan 24, 2017 at 09:00:26PM +0000, Tom Murphy wrote:
> > Hi Stefan,
> >
> > I've done some more testing. I managed to get 802.11n working in
> > hostap mode for a wh
Hi Stefan,
Many thanks for that explanation! It makes sense. You're right, some
low level code is really difficult to debug!
Kind regards,
Tom
On 07/02/17 20:41, Stefan Sperling wrote:
> On Tue, Feb 07, 2017 at 08:16:10PM +0000, Tom Murphy wrote:
>> Hi Stefan,
>>
>>
openvpn tunnels
On 8 Oct 2016 13:13, "Tom Smyth" wrote:
> Hello,
>
> I have tried compiling the openvpn source code on my router
> (a pcengines ALU2 ) device... no difference compared with the package
> I have tried increasing the process priority using renice but this
.0.0.1 netmask 0xff00 broadcast 10.0.0.255
Is there anything I can try to get 802.11n stable?
Thanks,
Tom
t;had no IPv6 support" on my side.
Hope this helps,
Tom
for me ...
Any comments any security issues associated with *.php* vs *.php location
directive would be welcome.
Hope this helps
Tom Smyth
--
Kindest regards,
Tom Smyth
Hi Lads,
I was building an intel server with 2x 6 Port SFP+ Hotlava Intel based
10GbE cards, running on 2x Intel E5 v2 6 core Xeon CPUs and with 24 GB Ram
It appears that the OpenBSD detects them with the ix(4) driver however when
I plug in a generic SFP+ Module ( MikroTIiK SFP+ 10km 1310 nm Si
MP Is there anything
I can do to improve the performance of the below setup or would I
be better off with a different card?
Thank you
Tom
OpenBSD 5.7-beta (GENERIC.MP) #825: Wed Jan 28 09:42:41 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4130385920 (3
mapping etc as im not
using these features anyway.
I hope this helps...
--
Kindest regards,
Tom Smyth
Mobile: +353 87 6193172
-
PLEASE CONSIDER THE ENVIRONMENT BEFORE YOU PRINT THIS E-MAIL
This email contains information which may be confidential or privileged.
The
sible to include it as patch in stable branch ?
failing that would someone give advice about trying to "back port" the fix
( I hate the thought of it )
any help / advice would be appreciated.
Thanks
--
Kindest regards,
Tom Smyth
Mobile: +353 87 6193172
-
Date: Wed, 04 Mar 2015 10:09:58 +0530
From: Ninad Shaha
To: misc@openbsd.org
Subject: panic due to bridge mem address conflict on IBM x3650M4 server
Message-ID: <54f68c9e.3070...@iitb.ac.in>
Dear All,
I want to use openbsd on IBM x3650 M4 server. I am able to install it
successfully. But while 1
ttp://mail-index.netbsd.org/netbsd-users/2012/10/19/msg011722.html
dmesg/pcidump below. acpidump available at
http://singlesecond.com/u310-acpidump.tgz
Cheers
Tom
OpenBSD 5.3-current (GENERIC) #76: Fri Mar 22 12:23:44 MDT 2013
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERI
gure() at cpu_configure+0x1b
main() at main+0x3df
end trace frame: 0x0, count: -14
ddb> ps
PID PPID PGRPUID S FLAGS WAIT COMMAND
*0 -1 0 0 7 0x10200 swapper
--
Tom Schutter
.foo.net".
I believe this is down to the behavior in config.c, line 454, in function
config_getserver_config:
srv_conf->maxrequestbody = parent->maxrequestbody;
It is always set to the parent's maxrequestbody.
Is this by design?
Thanks,
Tom
Hi
Please see the update on ports@
Cheers
Tom
On Thu, Oct 2, 2014 at 5:22 PM, Stuart Henderson
wrote:
> On 2014-10-01, Leonardo Santagostini wrote:
> > Ok, here i go, i downloaded pidgin from original web and sipe from their
> > web too.
> >
> > This procedure does n
g for refence here. There are a few 'not configured'.
Always happy to
help with any testing if needed on this hardware.
-Tom
OpenBSD 5.5 (GENERIC.MP) #297: Mon Feb 24 03:47:14 MST 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8461398016 (80
e forwarder address you might be able to statically configure
> > it, if not then you could modify vpnc-script to have it update the
> > address in unwind.conf and reload it.
>
> Thanks, this works somewhat:
>
> forwarder { $ip1 $ip2 }
> force accept bogus forwarder { $i
ld someone please point me in the right direction on what to look and
> configure?
>
> Thank you ..
>
>
--
Kindest regards,
Tom Smyth.
13.9.2021. 12:58, Tom Smyth wrote:
> > Hi Hrvoje,
> >
> > is 10.90.0.0/24 <http://10.90.0.0/24> local to your firewall, and if I
> > understand your rule,
> > ike esp from 10.90.0.0/24 <http://10.90.0.0/24> to anyyou are
> saying
> > encryp
thanks
--
Kindest regards,
Tom Smyth.
Recommendations on Buffer Space for Busy Unbound Resolver Service for a
network serving a 3000, customers
Thanks
--
Kindest regards,
Tom Smyth.
Sorry forgot to say running OpenBSD on an amd64, and hosted in a KVM
environment,
Thanks
Tom Smyth
On Tue, 21 Dec 2021 at 21:15, Tom Smyth
wrote:
> Recommendations on Buffer Space for Busy Unbound Resolver Service for a
> network serving a 3000, customers
>
> Thanks
>
THanks Dirk Ill give that a go
Cheers,
Tom Smyth
On Wed, 22 Dec 2021 at 00:30, Dirk Coetzee wrote:
> Hi Tom,
>
> I would recommend debugging using "unbound-control stats_noreset" and
> referencing the unbound configuration documentation at
> https://www.nlnetlabs
again, Really appreciate your
Tom Smyth
On Wed, 22 Dec 2021 at 11:26, Stuart Henderson
wrote:
> On 2021-12-22, Dirk Coetzee wrote:
> > Hi Tom,
> >
> > I would recommend debugging using "unbound-control stats_noreset" and
> referencing the unbound conf
is awesome ...
Tom Smyth
On Wed, 5 Jan 2022 at 16:09, Sean McBride wrote:
> Hi all,
>
> (Newbie and first time poster, please be gentle :))
>
> I'm trying to set up spamd, and I think I'm having trouble with pf. So
> I tried to add a very basic test rule. I adde
i think u need to do as root or configure doas to perform privleged
operation...
On Thu 13 Jan 2022, 17:26 Rob Whitlock, wrote:
> Attempting to extract xenocara.tar.gz while avoiding root proviliges as
> described here https://www.openbsd.org/faq/faq5.html#wsrc, I ran into an
> error, shown b
is pf allowing tcp port53 as well as udp port53 ?
On Wed 19 Jan 2022, 11:46 Laura Smith,
wrote:
> Hi
>
> OpenBSD NSD slave is driving me nuts with the following message in the
> logs "Could not tcp connect to X Operation timed out".
>
> The answer sounds obvious, but I can:
>
> - Ping the IP
> -
ect
invalid recipients up front with a message of your choosing:
filter validuser phase rcpt-to match !rcpt-to \
reject "550 5.1.1 Mailbox does not exist"
and then include that filter in the chain for the exchanger listener.
HTH,
Tom
>
>
> Configurations are below; than
Hello all, just following up on this as a call out to anyone who use nsh
or have used it in the past,
if you have any feedback / suggestions I would really appreciate that,
Thanks
Tom Smyth
On Sun, 18 Apr 2021 at 13:31, Tom Smyth
wrote:
> Hello,
>
> If anyone has used shells/nsh
need to disable all the
> dangerous functions, you can hardly use PHP. And then.. its on the PHP
> level, sooo. But maybe every little bit counts?
>
> Anyway, what are you guys doing if you're running PHP in production on
> OpenBSD? Besides from NOT running PHP in production at all.
>
> Kindest regards.
>
> --
> Sent with Tutanota, the secure & ad-free mailbox.
>
--
Kindest regards,
Tom Smyth.
>
> Am i missing something, or is this a bug? If the latter, is this email
> sufficient to get it looked at, or i would need to report it more
> formally?
>
> Thanks,
> ITwrx
>
>
--
Kindest regards,
Tom Smyth.
: Operation not permitted
tobsd# ifconfig
--
Kindest regards,
Tom Smyth.
Hey David thanks for reply makes more sens to me now ... Thanks again...
Tom Smyth
On Sat, 2 Apr 2022 at 04:11, David Gwynne wrote:
>
> loopback interfaces are special and kind of end up representing an rdomain
> inside the kernel, which is where this restriction comes from.
>
&g
rsion:/usr/src/lib/libssl/tls13_lib.c:150:
> lost connection after STARTTLS from mout.web.de
>
> Can anybody with more knowledge of libressl and it's error messages tell by
> this error what is wrong?
>
> Best regards,
> Stephan
>
--
Kindest regards,
Tom Smyth.
Openbsd you are running ...
man pfctl or man pf.conf will help you ...
if you need a intro to the intro ...
https://openbsdjumpstart.org by Wesley is pretty cool and gets you
started on OpenBSD and PF
Hope this helps,
Tom Smyth
On Thu, 7 Apr 2022 at 10:28, Brodey Dover wrote:
>
> To be
Steve,
if you like books ...
Peter Hansteen has written a book the book of pf
which I have read and would recommend
https://nostarch.com/pf3
and if you are interested in firewalls ingeneral and comparing features
On Thu, 7 Apr 2022 at 10:40, Tom Smyth wrote:
>
> Hi Steve,
> Im goin
6 irq 6 drq 2
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> uhidev0 at uhub0 port 1 configuration 1 interface 0 "QEMU QEMU USB Tablet"
> rev 2.00/0.00 addr 2
> uhidev0: iclass 3/0
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse1 at ums0 mux 0
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (cf14a346fbf0559d.a) swap on sd0b dump on sd0b
> fd0 at fdc0 drive 1: density unknown
>
>
>
--
Kindest regards,
Tom Smyth.
Kernel sorted it
On Thu, 14 Apr 2022 at 22:45, Tom Smyth wrote:
>
> Stuart
>
> is your host on an Intel System ?
>
> I had an awful time with Proxmox 5.0 and 5.1
>
> with clock drift and console freezes
>
> can you try to disable the following feature in the Proxm
I have an Intel based Proxmox 7.1 being built pre-Production Ill have
a go with it... Tomorrow and let you know
On Thu, 14 Apr 2022 at 22:54, Tom Smyth wrote:
>
> Stuart,
> sorry I wasnt entirely clear in my last email
>
> 1) you can try the /sys/module/kvm_intel/parameters/p
preemption timer on the
Proxmox Host
Sorry for bombing the list on this one ...
On Thu, 14 Apr 2022 at 22:54, Tom Smyth wrote:
>
> Stuart,
> sorry I wasnt entirely clear in my last email
>
> 1) you can try the /sys/module/kvm_intel/parameters/preemption_timer
>
> if the s
balanced
I hope this helps,
( and thanks for your patience with my previous impulsive (albeit
trying to help) replies earlier
Tom Smyth
On Fri, 15 Apr 2022 at 11:12, Stuart Henderson
wrote:
>
> On 2022-04-14, Stefan Sperling wrote:
> > On Thu, Apr 14, 2022 at 09:26:41PM -, Stuart Hen
regards,
Tom Smyth.
Hello all,
Thanks for the feedback it is really helpful to have peoples
experiences in the wild to
help feed into the training course content. and certainly better than
just my humble experience
I really appreciate all of your feedback.
Thanks again folks,
Tom Smyth
Tom Smyth
On Fri, 13 May
x27;s not something
> i have knowledge of
>
> - "more information in pf.conf": yes there is information in pf.conf on
> mtu, mss, and nat, including the syntax for using them. again, why
> wouldn;t we point people there?
>
> i'm happy to try and rework the text if you think it can be improved.
>
> jmc
>
--
Kindest regards,
Tom Smyth.
ace)
the Router on the VPN wont sent a Fragment needed IP message to the
client because the MTU of the Tunnel was not exceeded
(but the MTU on the underlay was exceeded)
I hope the clarifications helps and that im right or at least that I
learn something new :)
Thanks
Tom Smyth
On Sun,
unnels or full packets in tunnels (layer3) )
the benefit of being able to send the full packet over the fragmented
tunnel does not in any way increase perf...
and the TCP MSS clamping gives the best throughput (in my experience) ...
Thanks again,
Tom Smyth
On Sun 15 May 2022, 21:02 Stuart Hende
es do not perform
> in the circus
>
--
Kindest regards,
Tom Smyth.
Hello Folks Im in Brussles for the evening if anyone wants to meet up
--
Kindest regards,
Tom Smyth.
hi Adriano
can you just restart httpd with
rcctl restart httpd
did your ip addresses on external interface change ?
what are the loadef firewall rules
Thanks
Tom Smyth
On Thu 23 Jun 2022, 00:05 Adriano Barbosa, wrote:
> Hi.
>
> My httpd was working perfectly for the last 32
valid..
I hope this helps,
Tom Smyth
On Wed, 13 Jul 2022 at 02:38, Tobias Fiebig <
tob...@reads-this-mailinglist.com> wrote:
> Heho,
> I am running OpenBGPd (on 7.1+binpatches), and have some tunnel links
> between hosts and up/downstreams over wg tunnels.
>
> I am basically
has an idea, please let me know.
>
> Best regards
> Florian
>
>
--
Kindest regards,
Tom Smyth.
Folks
if any of you are using nsh on OpenBSD and
you have any feedback likes or dislikes would be glad to hear of them, I
will try to incorporate any feedback in the course on nsh in BSDCan or in
the manual page for nsh
Thanks
--
Kindest regards,
Tom Smyth.
Im missing,
would I be better off improving route(8) rather than stringing
commands together for NSH ?
comment and feedback welcome
--
Kindest regards,
Tom Smyth.
Thanks Stuart,
Ill take a look at how the prefix searches are done ... and see if I
can re-use that for route(8) if people think that it would be useful
to have in route(8)
Thanks again,
Tom Smyth
On Tue, 25 Jun 2024 at 09:39, Stuart Henderson
wrote:
>
> On 2024-06-24, Tom Smyth
removal code in place...
so more memory used but then interactive commands cannot tax the box
too much when asking what are all the blackhole routes, reject routes
host routes / arp entries ?
Thanks
Tom Smyth
On Tue, 25 Jun 2024 at 10:00, Claudio Jeker wrote:
>
> On Tue, Jun 25, 2024 at
?
Any thoughts / feedback welcome
Thanks
Tom Smyth
On Sun, 15 Mar 2020 at 15:26, Maurice McCarthy wrote:
>
> There is a discussion about sofdeps here
> http://openbsd-archive.7691.n7.nabble.com/What-are-the-disadvantages-of-soft-updates-td264283.html
>
--
Kindest regards,
Tom Smyth.
etc .
>
> > ###
> > This seems to solve problems with upgrades and package updates,
basically if the partition was not synced with a copy on shutdown you
would lose the updated files ...
>
> What problem?
>
> Jan
>
--
Kindest regards,
Tom Smyth.
Hi Kirill,
Ill give sync a go ... and see how it impacts performance...
thanks for the suggestion,
On Wed, 10 Jul 2024 at 16:30, Kirill A. Korinsky wrote:
>
> On Wed, 10 Jul 2024 14:44:28 +0100,
> Tom Smyth wrote:
> >
> > #cat /etc/fstab
> >
> > ff0023511d131f
mfs (asynchronous, local, noexec, nosuid,
size=32768 512-blocks)
Thanks again
On Wed, 10 Jul 2024 at 17:07, Tom Smyth wrote:
>
> Hi Kirill,
> Ill give sync a go ... and see how it impacts performance...
> thanks for the suggestion,
>
> On Wed, 10 Jul 2024 at 16:30, Kirill
sue (in my deployment scenario)
Thanks
Tom Smyth
On Wed, 10 Jul 2024 at 18:39, Kirill A. Korinsky wrote:
>
> On Wed, 10 Jul 2024 17:40:17 +0100,
> Tom Smyth wrote:
> >
> > swap /tmp mfs rw,nosuid,noexec,nodev,-s=262144 0 0
> > swap /var/log mfs rw,nosuid,noexec,nodev,-s=
Hi Stuart I heard that no swap stops dumps in the event of a panic
On Wed, 10 Jul 2024 at 21:46, Stuart Henderson
wrote:
>
> On 2024-07-10, Tom Smyth wrote:
> > I don't include a swap partition on the routers in the field as I
> > don't want them swapping to disk,
669180 - 3 em1
> 104.167.241.2108a:2c:1c:4a:15:f4 UHLc 0 1412439 - 3 em1
> 104.167.241.21100:25:90:5a:2d:92 UHLl 0 766416 - 1 em1
> 104.167.241.255104.167.241.211UHb0 449707 - 1 em1
> 127/8 127.0.0.1 UGRS 00 32768 8 lo0
> 127.0.0.1 127.0.0.1 UHhl 2 1707666 32768 1 lo0
>
> --
> jrmu
> IRCNow (https://ircnow.org)
>
--
Kindest regards,
Tom Smyth.
Hi Jan sorry for the late reply,
Thanks for your comments and questions ,
Replies are in line
On Wed, 17 Jul 2024 at 13:12, Jan Stary wrote:
>
> On Jul 10 17:05:55, tom.sm...@wirelessconnect.eu wrote:
> > Hi Jan
> > thanks for your Reply and feedback,
> > please find my replies in line ,
> >
>
erformance is not brilliant , so I'm hopping
there is a kernel driver device that would allow
I was wondering if anyone else ran into this issue and resolved it
with an existing device driver in OpenBSD...
Thanks
--
Kindest regards,
Tom Smyth.
Jeker wrote:
>
> On Tue, Jul 23, 2024 at 08:51:19AM +0100, Tom Smyth wrote:
> > Folks,
> >
> > As an ISP we often have to manage wans for customers where we don't
> > have access to customers firewalls, and the customers expect full
> > sized frames / packets
...
Thanks again
Tom Smyth.
irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
uhidev0 at uhub1 port 1 configuration 1 interface 0 "QEMU QEMU USB Tablet"
rev 2.00/0.00 addr 2
uhidev0: iclass 3/0
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (f6d6d0484f41c115.a) swap on sd0b dump on sd0b
--
Kindest regards,
Tom Smyth.
--
Kindest regards,
Tom Smyth.
submitted comprehensive bug reports
and or fixes and Pull requests ... it is really appreciated...
If you have encountered a problem in nsh recently we would like to tackle
it in the upcoming release
Thanks again
Tom Smyth.
32 0 2529286504
> 98156 0
> vlan0 150004:3f:72:b8:bf:0a 2324523408 0 994911784
> 3752 0
> vlan0 1500 10.90/1610.90.0.102324523408 0 994911784
> 3752 0
> vlan1 150040:a6:b7:3d:ac:60 1725034503 0 1757650331
> 92484 0
> vlan1 1500 10.1/16 10.1.0.2501725034503 0 1757650331
> 92484 0
> vlan10 1500bc:97:e1:d8:55:b0 841039615 0 1905162366
> 31036 0
>
>
> Thanks for your help.
> Marc
>
>
>
--
Kindest regards,
Tom Smyth.
401 - 500 of 753 matches
Mail list logo
