Hey friends,
what is the best/recommended place to store the vmm images. In man 5
vm.conf is an example with /var/vmm/, is this the best location?
Also if /var/vmm is its own partition, what would be the best mount
options for it. I would assume nodev, nosuid are good.
Any recommendations?
T
Hey,
Hey friends,
what is the best/recommended place to store the vmm images. In man 5 vm.conf
is an example with/var/vmm/, is this the best location?
Also if /var/vmm is its own partition, what would be the best mount options
for it. I would assume nodev, nosuid are good.
Any recommendations?
Hey friends,
i am trying out vmd and I have a little problem getting networking going
inside the guest machine. I am not sure if this is a problem in vmd or
simply my misconfiguration.
From my datacenter i got the following data:
Main Server (OpenBSD GENERIC.MP#99 amd64)
#
Hey,
On 07/20/17 06:25, Mike Larkin wrote:
sysctl net.inet.ip.forwarding=1 ?
I'm not a networking expert but I think your VM's subnet mask is wrong for
the gateway you are trying to use.
thank you for your response. I tryed it with net.inet.ip.forwarding
being 1 and 0. Both don't work. About
Hey,
On 07/20/17 13:05, Mischa Peters wrote:
Can you ask them how they route the separate subnet to you?
as far as i understand it they route the subnet on my main ip address.
From there documentation:
Newly assigned IPv4 subnets are statically routed on the main IP address of the
server,
Hey,
On 07/20/17 09:46, Denis Fondras wrote:
Can you people see something that i might missed?
The easy way would be enable forwarding, add a vether(4) on the host, bridge it
with tap0 and configure it with an IP in the 136.243.186.160/29 subnet. Use that
IP as the gateway in your VMs.
i did
Hey,
On 07/31/17 06:57, Krzysztof Strzeszewski wrote:
I update openbsd 6.1-current end is error. When I update, when I run
terminal imput/output error on xfce.
after upgrading to a clang snapshot you have to force pkg_add to
reinstall all packages on your computer.
pkg_add -D installed -uV
Hey,
On 09/29/17 15:06, Markus Rosjat wrote:
my boss is getting on my nerves that greylisting is basically out of
date because of things like outlook.com and mails ending up delayed for
ever. So the next logical step would be to deploy a tool like rspamd or
spamassasin to examin mail content.
Hey,
On 10/14/17 21:01, x9p wrote:
While running Alpine-virt 3.6.2 VM guest under OpenBSD 6.1 host, i noticed
the clock frequency is 2x slower on the guest machine. This can be a
problem for applications that relies on accurate time.
Even after sync clock with ntpd inside alpine-virt guest, it
Hello List,
i have a new graphics card in my desktop. Its a AMD Radeon RX 480. As
far as I understand the specs this is a polaris GPU. I used wsfb because
the normal radeon driver does not work yet with this modern graphics card.
I installed OpenBSD (6.3 GENERIC.MP#19 amd64) in the UEFI mode s
Hi,
i have searched the list archive and found some similar reports but none
of them found a solution for the problem. (at least not the threads i
have found)
I run some OpenBSD 6.3 instances in a virtual environment. The host is
some unknown Linux distribution with qemu on it. After the data
Hey,
thank you very much for the link. I have forwarded it to the support
staff at the datacenter. I hope they apply it very quickly. I let you
know if this fixes the problem.
Thanks and greetings
Leo
On 06/19/18 21:21, Kapetanakis Giannis wrote:
They should try setting this on the host:
kv
Hi,
today I got my new Laptop. A Lenovo ThinkPad E485 with an AMD Ryzen CPU.
I installed the latest OpenBSD -current on the device and a lot of stuff
work very well. I used the traditional installation method without EFI.
Only Wifi and Hybernate/Suspend don't work, but that was expected and is
The only big problem I have is that as soon as I start X I cannot use the
keyboard correctly. Every time I type a character on the keyboard it gets
repeated multiple times. Most often it gets repeated between 3 and 7 times.
Do you have any idea what I could to in order to fix/debug this?
Could be
On 09/19/18 03:29, Jonathan Gray wrote:
On Wed, Sep 19, 2018 at 03:03:12AM +0200, Leo Unglaub wrote:
The only big problem I have is that as soon as I start X I cannot use the
keyboard correctly. Every time I type a character on the keyboard it gets
repeated multiple times. Most often it gets
Hey,
i am sorry it took me so long to get back to you on this issue. As it
turns out this laptop has a lot of problems with OpenBSD so it took me a
long time to build your patch.
The patch below works fine and fixes the keyboard issue i had on my
Lenovo ThinkPad E485. Everything else works fi
Hello,
i just upgraded to the latest snapshot and i noticed that all my
external USB drives are not working anymore. (i tryed 3 different
external drives) As soon as i plug them into an USB port I get the
following message in my dmesg:
usbd_free_xfer: xfer=0xff041e9651e0 not free
I try
, Sep 19, 2018 at 03:03:12AM +0200, Leo Unglaub wrote:
The only big problem I have is that as soon as I start X I cannot use the
keyboard correctly. Every time I type a character on the keyboard it gets
repeated multiple times. Most often it gets repeated between 3 and 7 times.
Do you have any idea
Hey,
i have the following setup: I have the drive sd1 with 20GB and on there
i have one partition "a" with the type RAID. On that raid i have used
bioctl to create an encrypted partition. When i decrypt sd1a it becomes
sd3 and on there i have my normal sd3a with the type FFS.
It works great b
Hey,
On 2020-07-22 16:03, Otto Moerbeek wrote:
Backup, recreate the RAID, restore.
THe RAID meta data includes the size and AFAIK, there is now way to
change that after creation.
alright, i will do that!
Thanks so much for your help.
Greetings from Vienna
Leo
Hello,
today I wanted to apply the latest patches on our servers. They all
worked fine, only on one server where i was missing some previous
patches as well it got an error from syspatch.
# syspatch
Get/Verify syspatch62-005_
Hey,
On 03/20/18 05:43, Predrag Punosevac wrote:
1095 KB00:00 Installing patch 010_ahauth
Relinking to create unique kernel... failed!
I looked into /usr/share/compile/GENERIC.MP/relink.log but the only
thing in there is:
(SHA256) /bsd: FAILED
https://marc.info/?l=openbsd-misc&m=151
Hello,
i have a IPv6 problem since i upgraded to 6.3. I cannot reach other
hosts anymore over IPv6. Over IPv4 everything works fine. I have read
the part with RFC 7217 in the faq/upgrade63.html but as far as I
understand it I am not affected by that.
# ping6 google.com
PING google.com (2a00:
Hi,
Since you can reach your default gateway, but not "the outside world",
the next step would be to try to see how far you can get. Use
traceroute6 to see how for you get. Try a couple of different
destinations and see if that makes a difference.
Also, provide your routing table (the output
Hey,
see "IPv6 broken on Hetzner.de vServer OpenBSD 6.3 / amd64" on bugs@
I'm pretty sure hetzner sets a static route to your link local address for
the /64 they assign to you.
Since the the link local address changes with RFC 7217 you blackhole the /64...
you are right. It works fine when I
Hey,
my largest filesystem with OpenBSD on it is 12TB and for the minimal
usecase i have it works fine. I did not loose any data or so. I have it
mounted with the following flags:
local, noatime, nodev, noexec, nosuid, softdep
The only thing i should mention is that one time the server cras
Hi,
i upgraded my desktop to the latest 6.8 release. I uses sysupgrade to do
the upgrade and everything worked fine. But now i noticed in my dmesg
the following error messages:
softraid0: sd6: i/o error 5 @ CRYPTO block 475440376
softraid0: sd6: i/o error 5 @ CRYPTO block 475440376
softraid0:
schrieb Nick Holland:
On 2020-11-22 06:04, Leo Unglaub wrote:
Hi,
i upgraded my desktop to the latest 6.8 release. I uses sysupgrade to do
the upgrade and everything worked fine. But now i noticed in my dmesg
the following error messages:
softraid0: sd6: i/o error 5 @ CRYPTO block 475440376
softraid0
Hey,
i have a problem restarting nsd from a script that is run as doas. I
have read the man page of doas several times, but i dont understand what
i am doing wrong. Maybe someone of you could help me out. That would be
so nice.
My problem is": I have a script called "worker" and i invoce that
I am soo sorry for the noise. doas works as expected, my tar command
just exited silently with an error and rcctl never run as it should.
So sorry for the noise, for the history archives, doas works as expected!
Am 10.02.2021 um 19:25 schrieb Leo Unglaub:
Hey,
i have a problem restarting nsd
Hi,
i am trying to use relayd as an outbound proxy. I am following the
manual page and also the book "Httpd and Relayd Mastery". I did this on
the latest release 6.4 and also on the latest snapshot to make sure this
was not already fixed somewhere. I am on amd64.
My relayd config looks like t
Hi,
i am a huge fan of sysupgrade. It works perfectly on my laptop where i
use all sets that OpenBSD provides. But now i want to start to use
sysupgrade on a router where i don't need the "x*" sets.
I looked at the manual here (https://man.openbsd.org/sysupgrade) but did
not find a way to exc
On 09.07.19 15:13, Theo de Raadt wrote:
i am a huge fan of sysupgrade. It works perfectly on my laptop where i
use all sets that OpenBSD provides. But now i want to start to use
sysupgrade on a router where i don't need the "x*" sets.
I looked at the manual here (https://man.openbsd.org/sysupg
Hey friends,
i have the exact same problem as Heiko had more than one year ago here
on this mailinglist. See
http://marc.info/?l=openbsd-misc&m=143231965324314&w=2
Sadly his temporary solution does not work for me so i have to bring
this topic up again.
I have a server at the german hoster "He
Hey,
On 12/02/16 13:14, Reyk Floeter wrote:
This is a link-local address, you have to specify the interface scope id:
$ cat /etc/mygate
144.76.102.193
fe80::1%em0
thanks for the hint. I fixed this but that alone still does not help me
to send IPv6 data.
Hetzner also needs to know your lin
Hey friends,
i have two identical ssd drives in my laptop. sd0 and sd1. I created a
Raid 1 (mirroring) on them resulting in sd3. I used the following command:
bioctl -c 1 -l sd0a,sd1a softraid0
On the resulting disk i created sd3b with 2 GB Swap and sd3a with 100GB
with a type RAID.
Now
Hey,
On 05/13/16 21:08, Ted Unangst wrote:
you might try ktrace, since bioctl is not being very helpful here.
the problem is that i dont have ktrace available on the install iso. I
tryed to reproduce it on my OpenBSD desktop but there i dont have that
problem.
I looked up the part in the s
Hey,
On 05/14/16 15:19, Stuart Henderson wrote:
Your initial problem report was missing a lot of important
information - this is the first mention of it only happening
on the install iso, and you didn't mention what it is that
you're running (release? snapshot? which date? which arch?)
i am de
Hey,
On 05/15/16 09:23, Maurice McCarthy wrote:
I believe the installation ramdisk has limited space so you likely used it
all up with "MAKEDEV all". It is limited to install on very old systems.
thanks for the answer. That actually would explain my problem! Maybe the
bioctl error message cou
Hey friends,
my new external HDD has a sector size of 4096:
# disklabel -h sd8
# /dev/rsd8c:
type: SCSI
disk: SCSI disk
label: My Passport 0827
duid: 9210ccc858d72f52
flags:
bytes/sector: 4096
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 45599
total sectors: 73255833
Hey,
On 05/15/16 12:34, Daniel Jakots wrote:
It's in -current, see the commit [0] and the warning about softraid
metadata change [1].
big thanks for the information. I must have missed it.
Greetings
Leo
Hey,
i am using OpenBSD with two harddrives. Both of them are 2 TB and i put
them in a Raid 1 (mirroring) using softraid0. It works perfect, the
system boots from the raid 1 and runs perfectly.
Sadly now 2 TB is not enought disc space anymore and i got some new 4TB
drives. I suceeded in crati
Hey,
On 07/22/16 10:29, Alexander Hall wrote:
How did you install the system? If you didn't already, use the installer and
point it at the softraid disk (likely sd2). If that doesn't help, please show
what happens.
"i am unable to boot" tells us nothing.
i used the installer for installing
Hey,
On 07/29/16 18:13, Noth wrote:
OpenBSD can boot off UEFI & GPT since 5.9. Are you booting on MBR or UEFI?
yes, thats true and it works fine. The problem here seams to be the raid
1. Booting from an Raid 1 with disks larger than 2 TB seams to be
broken. Maybe its not intended to work, bu
Hey,
Works for me:
~ $ sudo disklabel -p m sd2
# /dev/rsd2c:
type: SCSI
disk: SCSI disk
label: SR RAID 1
duid: 7e4e73c2d1d85347
flags:
bytes/sector: 512
sectors/track: 255
tracks/cylinder: 511
sectors/cylinder: 130305
cylinders: 44975
total sectors: 5860532576 # total bytes: 2861588.2M
boundsta
Hey friends,
i have a OpenBSD 7.0 server with all syspatches applied. On that server
i have setup httpd and PHP 7.4 running via PHP-FPM. I followed the
readme provided by the package and everything seams to be fine.
There is only one issue when i try to establish a secure connection from
PHP
Hey,
thank you for your reply.
My first guess ist that the chain is not correct and so the server's
certificate cannot be validated.
you are correct about it. I read the openssl output wrong, i got
confused by "Verify return code: 0 (ok)" and thought the connection was
successful. But is was
Hey,
Kind of strange that this works. Port 587 (submission) is usually set up to use
STARTTLS, just like port 25 (smtp) so you would need specify -starttls smtp an
an option to openssl s_client. Port 465 (submissions, formerly known as smtps)
would work with mandatory TLS if the server suppor
Hey friends,
i am running OpenBSD 7.0 with all patches applied. Some weeks ago i
noticed a very strange issue with my OpenSMTPd instance. People are
unable to use TLS when connecting via IPv6. This is not just my
observation, some people on misc@ told me so as well.
I talked to gilles@ in pri
Hey,
On 11/01/2022 21:28, Stuart Henderson wrote:
I bet it is MTU related. Try lowering MTU on that interface (you
cannot do it separately for IPv4 and IPv6 so it will change both,
but that's not likely to be a problem) and get someone who has
seen the problems to re-test.
thank you so much fo
Hey,
On 1/13/22 19:18, Crystal Kolipe wrote:
Well, I can connect to his server using:
openssl s_client -starttls smtp -connect mail.unglaub.at:25
The handshake completes and I'm able to issue smtp commands.
However smtpd always reports that opportunistic TLS failed, and
downgrades to plaintex
Hey,
On 14/01/2022 08:31, Crystal Kolipe wrote:
Reading the manual page for openssl, specifically the section on s_client would
be a very good idea.
thank you for the hint. I did not know about this behavour. It does not
explain the initial bug, but certenly my testing of it.
For the archi
Hey,
On 14/01/2022 09:19, Stuart Henderson wrote:
That hostname doesn't match the certificate, it should validate ok for
storm-peaks.northrend.azeroth.wow-data.net (I also checked with
-servername to send SNI).
There's no difference between v4 and v6 for that though.
thank you very much for s
Hey friends,
i have a 500GB drive that is fully encrypted using a softraid with
raidlevel C. It works perfectly. But now the drive is getting full and i
have to grow it. This server is running in the Hetzner Cloud and
resizing the drive is supported to 10TB.
With an unencrypted partition thi
Hey,
i have a 500GB drive that is fully encrypted using a softraid with
raidlevel C. It works perfectly. But now the drive is getting full and i
have to grow it. This server is running in the Hetzner Cloud and
resizing the drive is supported to 10TB.
With an unencrypted partition this works wel
55 matches
Mail list logo
