grow a filesystem on a softraid

Wed, 22 Jul 2020 06:39:15 -0700 

Hey,
i have the following setup: I have the drive sd1 with 20GB and on there i have one partition "a" with the type RAID. On that raid i have used bioctl to create an encrypted partition. When i decrypt sd1a it becomes sd3 and on there i have my normal sd3a with the type FFS. 


It works great but now i have to grow that disk in size. I used 
"disklabel -E sd1", enlarged the boundried to the new size and then 
enlarged the disk. It worked great, disklabel -h sd1 shows already the 
new size. But when i decrypt by using "bioctl -cC -l sd1a" the new sd3 
is still on the old size. The problem is that i cannot enlarge the 
boundried on that sd3 disk. Any ideas what i can do in this case?





Here is the disklabel from sd1, the disk with the RAID partition that i 
could resize correctly.



# disklabel sd1 
# /dev/rsd1c:

type: SCSI
disk: SCSI disk
label: vol-vmai
duid: 8243870d445950cf
flags:
bytes/sector: 512
sectors/track: 80
tracks/cylinder: 16
sectors/cylinder: 1280
cylinders: 16383
total sectors: 419430400
boundstart: 128
boundend: 419430400

drivedata: 0 


16 partitions:
#                size           offset  fstype [fsize bsize   cpg]

  a:        419430272              128    RAID                    
  c:        419430400                0  unused 



And here is the disklabel from the sd3 disk, the one that i get when i 
decrypt sd1a.



# disklabel sd3                                                                                                                                                                   
# /dev/rsd3c:

type: SCSI
disk: SCSI disk
label: SR CRYPTO VMAIL
duid: f7defe201b90c524
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 1305
total sectors: 20969584
boundstart: 64
boundend: 20969584

drivedata: 0 


16 partitions:
#                size           offset  fstype [fsize bsize   cpg]
  a:         20964736               64  4.2BSD   2048 16384 12960 # /var/vmail

  c:         20969584                0  unused 




Maybe someone of you could be so kind and give me a hint into the right 
direction. That would be so nice, thanks!


Greetings
Leo



# dmesg                                                                                                                                                                           
OpenBSD 6.7 (RAMDISK_CD) #177: Thu May  7 11:19:02 MDT 2020

    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 4177383424 (3983MB)
avail mem = 4046757888 (3859MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf6a50 (10 entries)
bios0: vendor Hetzner version "20171111" date 11/11/2017
bios0: Hetzner vServer
acpi0 at bios0: ACPI 1.0
acpi0: tables DSDT FACP APIC
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Xeon Processor (Skylake, IBRS), 2100.23 MHz, 06-55-04
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLWB,AVX512CD,AVX512BW,AVX512VL,PKU,MD_CLEAR,IBRS,IBPB,SSBD,ARAT,XSAVEOPT,XSAVEC,XGETBV1,MELTDOWN
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: apic clock running at 1000MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu at acpi0 not configured
"ACPI0006" at acpi0 not configured
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"QEMU0002" at acpi0 not configured
"ACPI0010" at acpi0 not configured
cpu0: using VERW MDS workaround
pvbus0 at mainbus0: KVM
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
"Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
vga1: aperture needed
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 96:00:00:31:1f:b5
virtio0: msix shared
virtio1 at pci0 dev 4 function 0 "Qumranet Virtio SCSI" rev 0x00
vioscsi0 at virtio1: qsize 128
scsibus1 at vioscsi0: 255 targets
sd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+>
sd0: 39064MB, 512 bytes/sector, 80003072 sectors, thin
sd1 at scsibus1 targ 0 lun 1: <HC, Volume, 2.5+> serial.HC_Volume_4536178
sd1: 204800MB, 512 bytes/sector, 419430400 sectors, thin
virtio1: msix shared
virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Memory Balloon" rev 0x00
virtio2: no matching child driver; not configured
virtio3 at pci0 dev 6 function 0 "Qumranet Virtio Console" rev 0x00
virtio3: no matching child driver; not configured
virtio4 at pci0 dev 7 function 0 "Qumranet Virtio SCSI" rev 0x00
vioscsi1 at virtio4: qsize 128
scsibus2 at vioscsi1: 255 targets
virtio4: msix shared
xhci0 at pci0 dev 8 function 0 vendor "Red Hat", unknown product 0x000d rev 
0x01: apic 0 int 11, xHCI 0.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Red Hat xHCI root hub" rev 3.00/1.00 
addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhidev0 at uhub0 port 5 configuration 1 interface 0 "QEMU QEMU USB Tablet" rev 
2.00/0.00 addr 2
uhidev0: iclass 3/0
uhid at uhidev0 not configured
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd2: 39056MB, 512 bytes/sector, 79987043 sectors
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
softraid0: incorrect key or passphrase
sd3 at scsibus3 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 10239MB, 512 bytes/sector, 20969584 sectors
syncing disks... done
rebooting...
OpenBSD 6.7 (RAMDISK_CD) #177: Thu May  7 11:19:02 MDT 2020
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 4177383424 (3983MB)
avail mem = 4046757888 (3859MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf6a50 (10 entries)
bios0: vendor Hetzner version "20171111" date 11/11/2017
bios0: Hetzner vServer
acpi0 at bios0: ACPI 1.0
acpi0: tables DSDT FACP APIC
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Xeon Processor (Skylake, IBRS), 2100.20 MHz, 06-55-04
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLWB,AVX512CD,AVX512BW,AVX512VL,PKU,MD_CLEAR,IBRS,IBPB,SSBD,ARAT,XSAVEOPT,XSAVEC,XGETBV1,MELTDOWN
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: apic clock running at 1000MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu at acpi0 not configured
"ACPI0006" at acpi0 not configured
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"QEMU0002" at acpi0 not configured
"ACPI0010" at acpi0 not configured
cpu0: using VERW MDS workaround
pvbus0 at mainbus0: KVM
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
"Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
vga1: aperture needed
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 96:00:00:31:1f:b5
virtio0: msix shared
virtio1 at pci0 dev 4 function 0 "Qumranet Virtio SCSI" rev 0x00
vioscsi0 at virtio1: qsize 128
scsibus1 at vioscsi0: 255 targets
sd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+>
sd0: 39064MB, 512 bytes/sector, 80003072 sectors, thin
sd1 at scsibus1 targ 0 lun 1: <HC, Volume, 2.5+> serial.HC_Volume_4536178
sd1: 204800MB, 512 bytes/sector, 419430400 sectors, thin
virtio1: msix shared
virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Memory Balloon" rev 0x00
virtio2: no matching child driver; not configured
virtio3 at pci0 dev 6 function 0 "Qumranet Virtio Console" rev 0x00
virtio3: no matching child driver; not configured
virtio4 at pci0 dev 7 function 0 "Qumranet Virtio SCSI" rev 0x00
vioscsi1 at virtio4: qsize 128
scsibus2 at vioscsi1: 255 targets
virtio4: msix shared
xhci0 at pci0 dev 8 function 0 vendor "Red Hat", unknown product 0x000d rev 
0x01: apic 0 int 11, xHCI 0.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Red Hat xHCI root hub" rev 3.00/1.00 
addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhidev0 at uhub0 port 5 configuration 1 interface 0 "QEMU QEMU USB Tablet" rev 
2.00/0.00 addr 2
uhidev0: iclass 3/0
uhid at uhidev0 not configured
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd2: 39056MB, 512 bytes/sector, 79987043 sectors
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
softraid0: incorrect key or passphrase
sd3 at scsibus3 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 10239MB, 512 bytes/sector, 20969584 sectors
syncing disks... done
rebooting...
OpenBSD 6.7 (GENERIC.MP) #4: Wed Jul 15 11:16:20 MDT 2020
    
r...@syspatch-67-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4177383424 (3983MB)
avail mem = 4038176768 (3851MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf6a50 (10 entries)
bios0: vendor Hetzner version "20171111" date 11/11/2017
bios0: Hetzner vServer
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S5
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Xeon Processor (Skylake, IBRS), 2100.23 MHz, 06-55-04
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLWB,AVX512CD,AVX512BW,AVX512VL,PKU,MD_CLEAR,IBRS,IBPB,SSBD,ARAT,XSAVEOPT,XSAVEC,XGETBV1,MELTDOWN
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 999MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel Xeon Processor (Skylake, IBRS), 2100.00 MHz, 06-55-04
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLWB,AVX512CD,AVX512BW,AVX512VL,PKU,MD_CLEAR,IBRS,IBPB,SSBD,ARAT,XSAVEOPT,XSAVEC,XGETBV1,MELTDOWN
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu1: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
"ACPI0006" at acpi0 not configured
acpipci0 at acpi0 PCI0: _OSC failed
acpicmos0 at acpi0
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"QEMU0002" at acpi0 not configured
"ACPI0010" at acpi0 not configured
cpu0: using VERW MDS workaround
pvbus0 at mainbus0: KVM
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9
iic0 at piixpm0
vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 96:00:00:31:1f:b5
virtio0: msix shared
virtio1 at pci0 dev 4 function 0 "Qumranet Virtio SCSI" rev 0x00
vioscsi0 at virtio1: qsize 128
scsibus2 at vioscsi0: 255 targets
sd0 at scsibus2 targ 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+>
sd0: 39064MB, 512 bytes/sector, 80003072 sectors, thin
sd1 at scsibus2 targ 0 lun 1: <HC, Volume, 2.5+> serial.HC_Volume_4536178
sd1: 204800MB, 512 bytes/sector, 419430400 sectors, thin
virtio1: msix shared
virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Memory Balloon" rev 0x00
viomb0 at virtio2
virtio2: apic 0 int 10
virtio3 at pci0 dev 6 function 0 "Qumranet Virtio Console" rev 0x00
virtio3: no matching child driver; not configured
virtio4 at pci0 dev 7 function 0 "Qumranet Virtio SCSI" rev 0x00
vioscsi1 at virtio4: qsize 128
scsibus3 at vioscsi1: 255 targets
virtio4: msix shared
xhci0 at pci0 dev 8 function 0 vendor "Red Hat", unknown product 0x000d rev 
0x01: apic 0 int 11, xHCI 0.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Red Hat xHCI root hub" rev 3.00/1.00 
addr 1
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub0 port 5 configuration 1 interface 0 "QEMU QEMU USB Tablet" rev 
2.00/0.00 addr 2
uhidev0: iclass 3/0
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd2 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd2: 39056MB, 512 bytes/sector, 79987043 sectors
root on sd2a (3aa1953775dc1966.a) swap on sd2b dump on sd2b
fd0 at fdc0 drive 1: density unknown
sd3 at scsibus5 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 10239MB, 512 bytes/sector, 20969584 sectors
























					Reply via email to