Hello misc,
I have strange problem with mail.
I edit /etc/mail/aliases to set well known aliases like:
# Well-known aliases -- these should be filled in!
root:myn...@mydomain.net
manager:root
dumper:root
Then I run newaliases but mail is still delivered to local user.
I also run makemap -t a
On 1.5.2018 г. 13:23 ч., Marcus MERIGHI wrote:
open...@bgone.net (Ivo Chutkin), 2018.05.01 (Tue) 09:48 (CEST):
Hello misc,
I have strange problem with mail.
I edit /etc/mail/aliases to set well known aliases like:
# Well-known aliases -- these should be filled in!
root:myn...@mydomain.net
Hello everyone,
I try to get nagios 4.3.1 web page working with no luck so far.
It opens first page (main.php) but when I try to get to Hosts, Services
etc. I get 500 Internal Server Error.
On home page there is warning "Unable to get process status" but nagios
seems to be working, I see che
Hello all,
I run small ISP. All routers and firewalls run OpenBSD.
Reticently, client started to complain that their Citrix based systems
started to drop connections.
After some research, they tested with iperf and clearly see droped UDP
packets between my routers.
After that, I made test
After upgrading routers I will report back.
Thanks for your help.
Best regards,
Ivo
On 31.7.2020 г. 10:14 ч., Tom Smyth wrote:
Can you post your pf.conf...
If ur not using much filtering try pfctl -d to diasble pf and repeat
testing
Run top -S to see if sofnet is at 100%
On Thursday, 30
On 1.8.2020 г. 14:43 ч., Stuart Henderson wrote:
On 2020-07-31, Ivo Chutkin wrote:
Hello guys,
Thanks for suggestions.
Tweacking sysctl
net.inet.udp.recvspace=131072
net.inet.udp.sendspace=131072
solved the problem.
Test between routers that started to drop packets over 10Mbit, now run
Hello all,
I want to use Asterisk with MariaDB CDR backend.
I have working Asterisk.
I have working MariaDB.
As far as I understand, since Asterisk 11 I must use ODBC connector to
MariaDB.
Unfortunately I cannot find any practical info concerning OpenBSD,
Asterisk, ODBC and MariaDB.
I tried iod
On 15.10.2015 г. 04:45 ч., Chris Cappuccio wrote:
Stuart Henderson [s...@spacehopper.org] wrote:
On 2015-10-14, Ivo Chutkin wrote:
Hello all,
I want to use Asterisk with MariaDB CDR backend.
I have working Asterisk.
I have working MariaDB.
As far as I understand, since Asterisk 11 I must use
Hello list,
When I read OpenBSD could run on EdgeRouter Lite, I give it a try (now
with 6.2 current as of 28.11.2017).
I expected closer performance to Alix, but ERL even do not respond on
console in reasonable times, for example, it takes 10-15 sec to log in.
After reboot, it takes about 5 min
Hi to all there,
I am running authoritative dns servers on 5.9 and nsd.
I add new domain but I got these errors:
Mar 16 19:29:16 dns11 nsd[7480]: master/clients/proprevod.com:9: SOA
record with invalid domain name
Mar 16 19:29:16 dns11 nsd[7480]: master/clients/proprevod.com:11: out of
zone d
is really good?
Have you tested with nsd-checkzone tool?
idem for your nsd config with nsd-checkconf tool?
Le 03/16/18 à 18:55, Ivo Chutkin a écrit :
Hi to all there,
I am running authoritative dns servers on 5.9 and nsd.
I add new domain but I got these errors:
Mar 16 19:29:16 dns11 nsd[748
On 17.3.2018 г. 09:20 ч., Peter J. Philipp wrote:
On Fri, Mar 16, 2018 at 10:40:37PM +0200, Ivo Chutkin wrote:
It should be, here is the result:
~ # nsd-checkzone proprevod.com /var/nsd/zones/master/clients/proprevod.com
zone proprevod.com is ok
and nsd-checkconf does not return errors.
I am
Hello everyone,
Is there anyone with experience with this MB? Has anyone installed
OpenBSD on such a MB?
What I found is that it is from some OEM security device.
Here is link to ebay item 133362966075:
https://www.ebay.co.uk/itm/Supermicro-Motherboard-X10SLH-LN6TF-X10SLH-N6-ST031-6x-10GBE-P
Hello everyone,
Does anyone have experience with Dell EMS switches?
Namely S4100 series, S4128F-ON or S4188F-ON.
Are they robust and reliable?
I need to replace number of Extreme Networks X650. 10G ports are loaded
nearly 80% all the time. We are pushing Internet traffic and some multicast.
Hello guys,
Thanks for replies. To add some more info for the case.
We have DWDM network with star topology. Switches will be connected to
center point with 100G uplink (currently 10G or 2x10G) via DWDM lambda.
Customers are connected to 10G ports.
We carry Internet traffic and IPTV multicast
On 2.1.2023 г. 16:58 ч., Hrvoje Popovski wrote:
On 28.12.2022. 20:21, Stuart Henderson wrote:
On 2022-12-28, Hrvoje Popovski wrote:
Hi all,
I don't have much experience with BiDi sfp, so I'm asking you guys,
should openbsd ix work with 1G BiDi sfp.
should do, yes.
in case you're not aware,
Hello to everyone,
I have problem installing 4.4 stable on FSC Econel 100 S2.
I try to use the RAID controller on board LSI Logic MegaRAID as RAID 1
After choosing "install" from (I)nstall, (U)pgrade or (S)hell?
OpenBSD reports " No disks found. "
Am I doing something wrong with it?
Or this is
Hello Guys,
Thank you for your suggestions.
I will give a try to RT first.
Although, it does not install on my 4.4 stable :-)
Exits with Error code 1 on other port, namely gd-2.0.35
I can provide more info if needed, but I think ports mailing list is
appropriate place to report it.
Does some o
Hi Ingo,
It was definitely b Oh my god!b :) I was shocked because I usually extract
the source code.
Than, thanks to you I got my mind and realized that I did not extract the
source code when I installed the box.
It is one of my border routers, and I installed it during a b disasterb
period, t
Frothingdog.ca wrote:
I've been working on a OpenBSD image for a soekris boxes. I've actually made
some headway with some help and pointers from Chris (maker of flashdist).
I have the image mounted to /mnt/etc using vnconfig so I can modify the
files before flashing the image (ie. boot.conf, rc
Hello,
I am trying to build -current from 5.2 beta from Jul 1 but getting the
following error:
{standard input}: Assembler messages:
{standard input}:105: Error: no such instruction: `rdrand %rbx'
*** Error code 1
Stop in /usr/src/sys/arch/amd64/compile/GENERIC (line 89 of
/usr/share/mk/sys.m
On 21.1.2013 г. 10:50 ч., Jamie Paul Griffin wrote:
* Ivo Chutkin [2013-01-20 15:43:22 +0200]:
Hello, > I am trying to build -current from 5.2 beta from Jul 1
but getting
Yes, the recommended way and documented way to upgrade to current
is to download the latest snapshot. I persoanlly,
On 24.1.2013 г. 17:05 ч., Leonardo Lombardo wrote:
Hi all,
my setup is a firewall/router for a network in which I have a lot of VLANs.
WAN connection is only one so bandwith is a concern. WAN connection is
10Mbit/s.
Is there a way to shape N VLANs as a whole while having some other VLAN
with a
Hello guys,
I am lost with this simple task.
DHCP server does not start at boot.
If I started by #/etc/rc.d/dhcpd start, it starts and works properly.
If I check it with #/etc/rc.d/dhcpd check, i get dhcpd(failed)
I cannot see any errors in logs.
May be I miss something obvious. I have done it man
On 28.5.2015 г. 10:25 ч., Jan Stary wrote:
On May 28 10:06:03, open...@bgone.net wrote:
Hello guys,
I am lost with this simple task.
DHCP server does not start at boot.
If I started by #/etc/rc.d/dhcpd start, it starts and works properly.
If I check it with #/etc/rc.d/dhcpd check, i get dhcpd(fa
On 28.5.2015 г. 13:00 ч., Stuart Henderson wrote:
On 2015-05-28, Ivo Chutkin wrote:
Hello guys,
I am lost with this simple task.
DHCP server does not start at boot.
If I started by #/etc/rc.d/dhcpd start, it starts and works properly.
If I check it with #/etc/rc.d/dhcpd check, i get dhcpd
On 29.5.2015 г. 01:41 ч., Edgar Pettijohn III wrote:
On May 28, 2015, at 2:06 AM, Ivo Chutkin wrote:
Hello guys,
I am lost with this simple task.
DHCP server does not start at boot.
If I started by #/etc/rc.d/dhcpd start, it starts and works properly.
If I check it with #/etc/rc.d/dhcpd check
Hello all,
I am unable to log in with Pubkey after upgrade to 7.0
I can log in with user/password.
What i get in the log is:
Oct 22 15:10:01 sklad sshd[88986]: userauth_pubkey: key type ssh-rsa not
in PubkeyAcceptedAlgorithms [preauth]
Here is output of
~ $ ssh -Q key
ssh-ed25519
ssh-ed255
Hello guys,
It is not related to OpenBSD. Since I started my admin "career" with
OpenBGPD and OpenBSD, I just need some thoughts and advises from anyone
more experienced.
The situation is as follows:
I have 2 border routers in main location. All Upstreams,IX-es and
clients have eBGP sessions.
On 23.12.2011 P3. 08:01 Q., Raymond Lillard wrote:
On 12/22/2011 09:07 PM, Paul B. Henson wrote:
On Wed, Dec 21, 2011 at 08:08:08PM -0800, Josh Grosse wrote:
Woops. I misread your post. The commits were September 19, which is
-current, beyond 5.0-release.
You must either migrate to -current,
On 24.12.2011 P3. 15:06 Q., Josh Grosse wrote:
On Sat, Dec 24, 2011 at 02:26:26PM +0200, Ivo Chutkin wrote:
Sorry for hijacking this tread.
Can someone take time to clarify install process on softraid.
I read the article on undeadly.org, preform the install on sd2, my
softraid0, copy kernels
On 24.12.2011 P3. 15:42 Q., Ivo Chutkin wrote:
On 24.12.2011 P3. 15:06 Q., Josh Grosse wrote:
On Sat, Dec 24, 2011 at 02:26:26PM +0200, Ivo Chutkin wrote:
Sorry for hijacking this tread.
Can someone take time to clarify install process on softraid.
I read the article on undeadly.org
Hello guys,
I have some issues with the following configuration:
There are number of SIM cards, placed in taxi cars, collecting GPS data
and sending them to two Windows servers with some application, than this
application sends some data back.
Network topology is as follow:
Sim card -> Teleco
Hello,
Does anyone else get this message when update spamd blacklist:
ftp: Improper response from www.spamhaus.org
I use their blacklist with spamd and started to get this since yesterday.
Thanks,
Ivo
Hello all,
I have problem installing packages via ftp on a new 4.2 installation.
It is a standard installation with 2 patches applied (001 and 002),dmesg
is on the bottom.
I have tried rrdtool-1.0.49p4.tgz and mc-4.6.1p1.tgz so far.
I succeeded to get mtr-0.72-no_x11.tgz installed though. I have
install xbase42 (if you need to build ports, you may need xshare42).*
*Best regards,
Jean-philippe.
Ivo Chutkin a icrit :
Hello all,
I have problem installing packages via ftp on a new 4.2 installation.
# pkg_add -v
ftp://ftp.stacken.kth.se/pub/OpenBSD/4.2/packages/i386/mc-4.6.1p1.tgz
Can&#
Hello to all here,
I would be grateful if you share your ideas and experience with me.
The problem is not related to OpenBSD as I do not use it yet in
production environment, but I plan to go over it as soon as I finish my
tests and feel comfortable with it. :-)
Actually the developers have don
Henning Brauer wrote:
* [EMAIL PROTECTED] <[EMAIL PROTECTED]> [2007-03-07 09:54]:
I use route-maps in my quagga setup, but i do not see this options in
OpenBGP.
not having the route-map desaster was a design goal.
look at the filter language, it can do all you want.
there's a section about it
Hello Theo.
Is this sounds OK?
http://cgi.ebay.com/512MB-Memory-DRAM-Cisco-2811-2821-2851-MEM2811-512D_W0QQitemZ120134089244QQihZ002QQcategoryZ51209QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Let me know and I will try to buy it for you.
Regards,
Ivo
Theo de Raadt wrote:
It would be nice if someone cou
Hello misc,
I cannot get ping and traceroute working with bgplg on 4.4 stable.
Both show "failed" on the web interface.
Everything else works perfect.
I followed man pages and checked everything many times and there is no
log entries for any errors.
I appreciate your help,
Ivo
Hello,
I am collecting interface statistics with pfstat on OpenBSD 4.9.
Everything works fine except pfstat -t (days). The .db files getting big
so I want to clear old entries, unfortunately it does not work.
Here is what I do:
root@storage.
~ # du -h /var/db/pfstat.db
801M/var/db/pfstat.db
Hello,
I have general question about redistributing default route to ospf peers.
I have R1 which is connected to upstream ISPs via BGPd.
The R1 should redistribute (used to with openbsd 4.4 and after upgrading
to 5.1 it stopped) default route to C1 via OSPFd.
I have read that in order to redistri
On 25.6.2012 г. 21:42 ч., Matthias Cramer wrote:
Hi Marios
On 25/06/12 20:36, Marios Makassikis wrote:
Seeing your solution ( glad you solved your problem by the way :) ), it
looks
like someone is bruteforcing your server. Which implies that the first
step prior
to attempting to authenticate
?
On 4.10.2011 P3. 20:56 Q., Ingo Schwarze wrote:
Hi Igor,
Ivo Chutkin wrote on Tue, Oct 04, 2011 at 07:12:31PM +0300:
?
you are asking for flames, right?
Here is a gentle one:
A good way to test a public list is to look at a public web
archive, figure out the latest posting, and look into
Hi all,
How can I destroy softraid partition on disk?
I was playing with sofraid, now I want to install fresh copy on same disk.
When I try to delete raid partition disklebel reports:
disklebel: ioctl DIOCWDINFO: Open partition would move or shrink
disklebel: unable to write lebel
How can I del
On 18.11.2011 P3. 15:50 Q., Nigel Taylor wrote:
On 11/18/11 13:29, Ivo Chutkin wrote:
Hi all,
How can I destroy softraid partition on disk?
I was playing with sofraid, now I want to install fresh copy on same disk.
When I try to delete raid partition disklebel reports:
disklebel: ioctl
On 25.3.2011 P3. 11:00 Q., iridaoc iribag wrote:
Hello same problem here on DELL PowerEdge R210.
Starting with OpenBSD 4.8 Release was Ok.
Applying patchs one by one until patch 006_cbc.patch
System cold reboots with this patch.
Back to kernel GENERIC.MP 4.8 release + patchs : 001_bgpd.pat
Hello Misc,
Recently I upgraded my firewall to 4.8 -stable form 4.5.
Everything went well except my spamd setup. I run it in blacklist mode only.
It is running according to logs, netstat, ps ax and top. The table spamd
in pf.conf gets populated by spamd-setup but nothing gets to the spamd.
I am
Hello sirs,
I have problem to get this system running.
It is Supermicro P8SCi, dmesg and panic messages are below.
I have three identical systens, I tried 4.8 stable, 4.9 official and 4.9
snapshot, all i386 GENERIC and 4.9 snapshot GENERIC.MP
ACPI enabled and disabled.
The result is the same. I
-c
disable inteldrm
quit)
Ivo Chutkin [open...@bgone.net] wrote:
Hello sirs,
I have problem to get this system running.
It is Supermicro P8SCi, dmesg and panic messages are below.
I have three identical systens, I tried 4.8 stable, 4.9 official and
4.9 snapshot, all i386 GENERIC and 4.9 snapshot
Hi Owain,
I was not able to disable it by "config -e /bsd", it keeps panic.
I just compile new kernel with inteldrm disabled and it OK.
Thanks for the help,
Ivo
On 1.5.2011 P3. 18:16 Q., Owain Ainsworth wrote:
On Sun, May 01, 2011 at 05:57:47PM +0300, Ivo Chutkin wrote:
Hi Chris,
Hello misc,
I have problem mounting usb disk at boot time (namely Western Digital My
Book 1130) on Alix2d2 board, dmesg below.
I am getting this message and the disk is not mounted:
mount_ffs: /dev/sd0a on /data: Device not configured
also:
r...@asterisk1.my.domain
~ # mount
/dev/wd0a on / typ
On 2.5.2011 P3. 14:03 Q., Olivier Cherrier wrote:
On Mon, May 02, 2011 at 12:31:47PM +0300, open...@bgone.net wrote:
Dmesg:
OpenBSD 4.8-stable (GENERIC) #1: Wed Apr 6 17:51:44 EEST 2011
r...@mail.bgone.bg:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD P
Hello Misc,
Some months ago I upgraded my firewall to 4.8 -stable form 4.5.
Everything went well except my spamd setup. I run it in blacklist mode only.
It is running according to logs, netstat, ps ax and top. The table spamd
in pf.conf gets populated by spamd-setup but nothing gets to the spamd.
On 25.5.2011 P3. 15:25 Q., Joakim Aronius wrote:
* Ivo Chutkin (open...@bgone.net) wrote:
from pf.conf:
pass in log on $ext300 proto tcp from to any port smtp
rdr-to 127.0.0.1 port spamd
pass in log on $ext300 proto tcp from to any port smtp
rdr-to 127.0.0.1 port spamd
Hard to tell as
On 25.5.2011 P3. 15:32 Q., Stuart Henderson wrote:
On 2011-05-25, Ivo Chutkin wrote:
Hello Misc,
Some months ago I upgraded my firewall to 4.8 -stable form 4.5.
Everything went well except my spamd setup. I run it in blacklist mode only.
It is running according to logs, netstat, ps ax and top
Hello misc,
I am getting this message "mpi0: can't get RAID vol cfg page 0
" every 10 seconds on console and /var/log/messages.
The system is DELL PowerEdge 1655MC with PERC4/mi LSI logic hardware
raid controller, RAID1 (mirror) enabled, hard drives synced, OpenBSD 4.5
-stable as of December 3
Kenneth R Westerback wrote:
On Sat, Dec 05, 2009 at 02:40:08PM +0200, Ivo Chutkin wrote:
Hello misc,
I am getting this message "mpi0: can't get RAID vol cfg page 0
" every 10 seconds on console and /var/log/messages.
The system is DELL PowerEdge 1655MC with PERC4/mi LSI logi
On 05.2.2010 P3. 09:59, Sebastiano Pomata wrote:
On Fri, 5 Feb 2010 02:05:49 + (UTC)
Stuart Henderson wrote:
On 2010-02-04, Sebastiano Pomata wrote:
As doublechecking, I tried with another fast server inside the wan
network of our academy, and I'm getting almost the same results
(while a
Hello misc,
Would the following filter work?
match to $my_upstream_1 source-as {some_as} set prepend-self 4
I would like to prepend my as to make as path longer for "some_as"
trough my_upstream_1 and make it to prefer path trough my_upstream_2.
It does not produce error with bgpd-n but there
On 10.2.2010 P3. 21:32, Stuart Henderson wrote:
On 2010-02-10, Ivo Chutkin wrote:
Hello misc,
Would the following filter work?
match to $my_upstream_1 source-as {some_as} set prepend-self 4
I would like to prepend my as to make as path longer for "some_as"
trough my_upstream_1 a
On 12.2.2010 P3. 11:10, Stuart Henderson wrote:
On 2010-02-11, Ivo Chutkin wrote:
match to $my_upstream_1 source-as {some_as} set prepend-self 4
I would like to prepend my as to make as path longer for "some_as"
trough my_upstream_1 and make it to prefer path trough my_upstream_2.
I
Hallo Misc,
I need some general clarification about OSPF and BGP behavior.
I have tow border routers, border1(OpenBSD4.4 - stable)and
border2(OpenBSD4.4 -stable), and one core router, core1(OpenBSD4.5 -
stable).
Each border router talk eBGP(full feeds) with one upstream provider and
have iBGP
:
Hi,
On Wed, 29 Jul 2009 14:38:43 +0700, Ivo Chutkin wrote:
Hallo Misc,
I need some general clarification about OSPF and BGP behavior.
I have tow border routers, border1(OpenBSD4.4 - stable)and
border2(OpenBSD4.4 -stable), and one core router, core1(OpenBSD4.5 -
stable).
Each border router
Hi Claudio,
Thank you for your help.
Everything works as expected.
Regards,
Ivo
Claudio Jeker wrote:
On Thu, Jul 30, 2009 at 11:36:15AM +0300, Ivo Chutkin wrote:
Hi Claudio and Insan,
Thank you very much for clarified it.
I have another question.
Can I force the core to select only one
Hello misc,
I have strange problem when I use PF for traffic shaping.
No such problem with PF disabled.
It is OpenBSD 4.5 stable. Here is dmesg: http://paste.lisp.org/display/84738
The problem is that the router start to generate losses.
It generates losses even to directly connected hosts. Here
2009-08-04, Ivo Chutkin wrote:
Hello misc,
I have strange problem when I use PF for traffic shaping.
No such problem with PF disabled.
It is OpenBSD 4.5 stable. Here is dmesg: http://paste.lisp.org/display/84738
look for queue drops. pfctl -vvsq.
The problem is that the router start to gener
Sha'ul wrote:
Where can I find some information or some sort of guide for how to setup
and configure OpenBSD to install on an old PC to use as a router and
firewall?
This is very useful article:
http://www.benjaminheckmann.de/howto/openbsd42_altq_v2.7.pdf
Regs,
Ivo
__ Informatio
69 matches
Mail list logo
