> you can write a shell script to move given parameters into a special folder
> and make alias rm="that_script"
> and a rc script which empty this folder at boot/shutdown.
That is indeed the recommended approach for those who need it.
An example was published in the O'Reilly book Unix Power Tools.
o I get a block device in /dev to connect to
my driver open/close/ioctl/etc functions? And secondly, if I want this
to happen automatically a la MAKEDEV, am I supposed to edit the m4 macro
in etc/etc.armv7/MAKEDEV.md or is there a more proper way?
Ian
Awesome - good deal. I have a Netra X1 running openbsd and it's rock solid.
Good luck,
-Ian
On 11/30/05, Bob Ababurko <[EMAIL PROTECTED]> wrote:
>
>
> I totally appreciate everybodies comments and I have in fact decided to
> pass over the embedded solution. We just pic
On Thu, Oct 12, 2017 at 12:58 PM, wrote:
> Hi,
>
> I just discovered, to my dismay, that size_t is only 32 bits, even on
> 64-bit processors. Is there a particular pressing reason for this? A
> quick investigation reveals that even dd(1) is affected -- this is IMO
> not good.
>
> I'd suggest, giv
On Thu, Apr 23, 2020 at 04:42:53PM -0400, Allan Streib wrote:
> > So, can I setup openBSD labels on x86_64 without legacy/GPT partition
> > first ?
>
> IIRC yes you can, as long as you don't need to boot from that disk.
Easily confirmed (a few false starts deleted from this transcript):
$ unam
Following the revalations made by a misc@ poster, I am happy to present
the following patch which increases the width of size_t from "long" to
"long long", which is twice the width as before, on all platforms. This
has the effect of doubling the amount of available memory regardless of
the physical
On Thu, May 28, 2020 at 02:21:49PM +1000, Aaron Mason wrote:
> On Thu, May 28, 2020 at 2:20 PM Quantum Robin
> wrote:
> > While surfing on the Google to learn more about OpenBSD, I encountered this
> > one: "OpenBSD: Not Free Not Fuctional and Definetly Not Secure (
> > https://aboutthebsds.wordp
On Fri, Jun 05, 2020 at 12:49:41PM -0500, Ed Ahlsen-Girard wrote:
> On Mon, 01 Jun 2020 13:38:55 -0400
> "Eric Furman" wrote:
>
> > On Mon, Jun 1, 2020, at 10:28 AM, Paul de Weerd wrote:
> > [...]
> >
> > This is why if you are serious you use a degausser.
> >
>
> The truly serious use a sm
Has anybody installed OpenBSD on these chromebooks? Asus sold a lot of
them, and they are losing Google's support next month so there should
be a lot available cheaply if you just want something to travel with
for email/web/chat.
On Mon, Jul 06, 2020 at 04:57:20AM +, ken.hendrick...@l3harris.com wrote:
> I have tried putting "rcctl enable nsd" in the /etc/rc.conf.local file.
> That did not help.
I presume you meant "using rcctl enable nsd to update /etc/rc.conf.local",
not actually what you wrote.
> If I try to start
On Wed, Aug 26, 2020 at 02:37:24AM -0700, Greg Thomas wrote:
> "... he had to set up an entirely new mail client which didn’t mangle his
> email message to HTML-ise... That’s a barrier to entry that’s pretty
> high..."
>
> Wow. Life's rough.
Surely easier than RTFMing to find out how to send pla
On Sat, Aug 29, 2020 at 01:37:35PM +, Henry W. Peterson wrote:
> But then I would need to have every computer's serial port connected
> the whole time, right? As far as I know serial ports are not
> hot-swappable.
Nope. I have two APUs and only one is ever connected, since I have
only one USB
On Sat, Aug 29, 2020 at 03:56:29PM +, Henry W. Peterson wrote:
> It is not a problem for me to write commands on the boot prompt after every
> turning on, that would eliminate the need to modify /etc/boot.conf, right?
> Althogh I didn't know modifying that file affected the boot prompt itsel
On Thu, Sep 17, 2020 at 03:07:19PM -0700, Sean Kamath wrote:
>
>
> > On Sep 17, 2020, at 09:48, Ingo Schwarze wrote:
> > That answer [HP] used to be spot on until about the year 2000.
>
> I concur. I used to work at a printer company that competed directly with
> them.
Was that Imagen, by an
On Sun, Sep 27, 2020 at 08:14:13PM +0200, Why 42? The lists account. wrote:
>
> I am running:
> kern.version=OpenBSD 6.8-beta (GENERIC.MP) #69: Tue Sep 15 12:34:41 MDT 2020
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>
> I just tried to use sysupgrade and I notice t
When trying to boot -current i386 from a clean install on the internal
flash drive, this thing panics on the same line as the 'acpi sleep
states' after 'S5'. As a workaround, I can load pxeboot with a boot.conf
to boot bsd. My guess would be that pxeboot passes control to the
kernel with some tri
> The sysupgrade tool is a nice way to install the newest snapshot, never
> had a problem. But what is the correct way to install a stable release
> on snapshot? Using the standard bsd.rd upgrade way?
>From man sysupgrade:
-r Upgrade to the next release. The default is to find out if t
Hi, I am interested in buying an OpenBSD Tshirt. I live in Denmark. Can you
help me? Kind Regards Ian
Today acme-client renewed all but 2 of my domains; the two that have
"alternative names"
in the certificates. I cannot get it to renew those two. This is on amd64 on
6.6-current,
updated today.
My acme-config.conf is the latest example version, with the v2 URLs and with
example.com replaced by
On 10/21/19 19:38, Ian Darwin wrote:
Today acme-client renewed all but 2 of my domains; the two that have "alternative
names"
in the certificates. I cannot get it to renew those two. This is on amd64 on
6.6-current,
updated today.
Just to follow up: Of my two problem domains, one
On Mon, Nov 04, 2019 at 02:06:35AM -0500, Steve Litt wrote:
>
> I know what you mean and you're right to a degree, but I'm currently
> writing a couple of books with AsciiDoctor edited in Vim. And I use
> VimOutliner for outlining. I'll try to remember and let you know when I
> actually finish one
On Thu, Nov 07, 2019 at 11:34:48PM +, Mik J wrote:
> Hello,
> What this does mean ?> Just to follow up: Of my two problem domains, one was
> caused by pebkac
pebkac = problem exists between keyboard and chair. In other words, user error
the loop.
Raw data and chart of the offset over the 24 hours is available in
this Google sheet: http://bit.ly/34NTaUh
Is this likely to point to a bug in the pvclock implementation or an
environment/configuration issue?
Thanks
Ian
dmesg (guest)
=
OpenBSD 6.6 (GENERIC) #0: Sat Oct
On Wed, Nov 13, 2019 at 01:25:46PM -0500, Ted Unangst wrote:
> > Can you give me the exact model of the one you bought recently? I have
> > half a mind to just write
> > off mine as a loss and buy something else.
>
> I am using this one: (the TL-WN725N N150 single band one)
>
> https://www.amazo
dvise if I've missed something? Happy to provide further
data if needed.
Thanks
Ian
On Fri, 8 Nov 2019 at 13:53, Ian Gregory wrote:
>
> Hi
>
> Since the 6.6 release I've been experimenting with using pvclock as
> the selected timecounter on a virtual machine running under v
On Fri, Nov 15, 2019 at 10:08:26AM -0700, Theo de Raadt wrote:
> Christian Weisgerber wrote:
>
> > > I think, for editing config files, there are sure editors that
> > > are simpler, smaller, not so powerful, but easier to use than ed.
> >
> > By all means, do not keep us in suspense and tell us
nt ntpd is able to keep the clock synced so in the absence
of further lines of investigation I'm inclined to leave as-is and
continue to monitor. I will update the list if I discover anything
new.
Ian
On Fri, 15 Nov 2019 at 09:17, Ian Gregory wrote:
>
> I continued to investigate this
On Tue, 19 Nov 2019 at 21:20, Ian Gregory wrote:
> I can
> confirm that change resolved the precision issue described in the
> linked thread, but it also seems to have resulted in much improved
> clock stability (4 steps in 24hr, 1.0s, 1.0s, 0.5s, 0.5s).
Correction - there wer
On 12/30/19 15:02, Peter Nicolai Mathias Hansteen wrote:
The TL;DR version is that taking code or any other body of work that is offered
to you under a permissive license and making your changes to it available only
under a more restrictive one may be legal in some or all jurisdictions, but it
On Mon, 30 Dec 2019 at 19:57, Nick Holland
wrote:
most of them are stupid words. I just spot checked one of the
"license problems" they think they spotted in the OpenBSD tree.
http://cvsweb.openbsd.org/cgi-bin/cvsweb/~checkout~/src/sys/arch/landisk/include/endian.h?rev=1.2
What exactly are th
> - If we could clean-room implement a BSD-licensed
> EXT3/EXT4/BTRFS/XFS/JFS/whatever, following style(8), would there be
> interest in supporting that in OpenBSD?
And which "we" are you referring to here? Did you mean yourself,
or are you hoping that "somebody" will do it?
> There's merit in th
Peter wrote:
> chi# iperf -c beta.internal.centroid.eu
>
> Client connecting to beta.internal.centroid.eu, TCP port 5001
> TCP window size: 17.0 KByte (default)
>
> [ 3] loca
On Wed, Feb 05, 2020 at 01:50:41PM -0700, Raymond, David wrote:
> I have had good luck on OpenBSD with a variety of HP printers using
> the hplip package and cups. (To use the latter, put /usr/local/bin
> before /usr/bin in your PATH to avoid confusion with lpr programs.)
> The xsane package does
On Mon, Mar 02, 2020 at 12:28:25PM +0100, Wolfgang Pfeiffer wrote:
> > It's also a pity the the faq are not available in a single html or pdf
> > format. This would be handy for those who, like me, are studying for
> > the BSD Specialist certification. Having a single document makes it
> > easier t
within the bounds of what
ntpd can correct.
See
http://openbsd-archive.7691.n7.nabble.com/pvclock-stability-tp376946p377922.html
for some backstory
(aside: I see similar small occasional clock jumps of an integer
number of seconds on OpenBSD-6.6 guests using tsc running on a VMware
ESXi host)
Regards
Ian
Hello
Syracuse, NY -- no CD, but poster has arrived. looks great!
http://ce.gl/openbsd-5.8-poster.jpg
ian
On Wed, Oct 7, 2015 at 10:51 AM, M Wheeler <6f84c...@refn.co.uk> wrote:
> CD's arrived today UK. Thanks again.
please do not use this list to test markov bots, it is for
miscellaneous openbsd discussion, thanks
Hi,
There is no need. There is nothing secret on those web servers, there
is no logical reason to encrypt it. This issue has been discussed to
death. Please check archives.
Ian
On Tue, Feb 6, 2018 at 4:03 AM, Hess THR wrote:
> Hello,
>
> because HTTPS increases the authenticity,
I’ve been a long time user of OpenBSD, but this is the first time I’m trying to
setup a VPN. I’m not sure what I’m doing wrong, or what should be the next step
to troubleshoot. I’ve probably reviewed every IKEv2 how-to I can find.
I need to end up with a configuration that will support several s
On Thu, Dec 24, 2020 at 11:51:26AM +0100, Gabriel Hondet wrote:
> Hi,
>
> How can I program my computer to automatically wake from suspend to ram
> or suspend to disk at a certain time?
>
> My goal is to suspend a server every day from, say, 11 pm to 7am.
For suspending at night, use see the cro
k: ESDI/IDE disk
label: 2GB ATA Flash Di
duid: 71279e1f58da9a16
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 64
sectors/cylinder: 4032
cylinders: 992
total sectors: 4000752
boundstart: 64
boundend: 3999744
drivedata: 0
16 partitions:
#size offset fstype [fsize bsize cpg]
a: 3869376 64 4.2BSD 2048 16384 12960 # /
b: 130304 3869440swap# none
c: 40007520 unused
ian-wyse-acpi.tgz
Description: application/tar-gz
On Tue, Dec 29, 2020 at 09:42:59AM -0500, Bryan Steele wrote:
> On Mon, Dec 28, 2020 at 01:20:29PM -0500, Ian Darwin wrote:
> > Kernel is OpenBSD 6.8-current (GENERIC) #561: Sun Dec 27 18:29:43 MST 2020
> >
> > Machine is a Wyse C90 - orignially sold as a "thin clien
On Fri, Jan 08, 2021 at 05:20:36PM +0100, Rudolf Sykora wrote:
>
> Todd C. Miller writes:
>
> > You need to login in again. Logging in via ssh, a virtual console,
> > X11 or running su will set the groups list. Setting groups is a
> > privileged operation so simply starting a new shell or open
Hi,
I'm trying to get IKEv2 VPN working with Windows 10. I'm able to use PSK with
macOS without issue. Changing to EAP MSCHAP for use with Windows results in the
following error:
"The network connection between your computer and the VPN server could not be
established because the remote server
> On 13 Jan 2021, at 06:04, Cand Tec wrote:
>
> This is my first time responding to a post so forgive me if I violate any
> protocols here. I currently use OBSD 6.8 amd64 as a FW for 3 office clients,
> all running on high-end repurposed desktops. Due to covid I've had to quickly
> setup ikev
> On 14 Jan 2021, at 01:28, Stuart Henderson wrote:
>
> On 2021-01-13, Ian Timothy wrote:
>> Looking at some of the other information provided, I tried this along with
>> the registry edit below:
>>
>> PS> Add-VpnConnection -Name "IPB2" -S
> The device nodes don't exist until the install or upgrade program detects
> the disk and creates them.
>
> Likewise for wd0 as although outdated for ahci disks.
>
> Dmesg identifies the disk as:
> sd0 at scsibus0 targ0 lun0 ATA ST1000DM003...
> sd0 953869mb
>
> This is why I had to run th
On Tue, Mar 09, 2021 at 09:52:03AM +0100, Jan Johansson wrote:
> If I try to cp or dd the disk image on the host it fails
>
> dd if=disk.raw.old of=disk.raw.bak bs=1m
> dd: disk.raw.old: Input/output error
> 8858+0 records in
> 8858+0 records out
> 9288286208 bytes transferred in 102.048 secs (910
On Sat, Apr 10, 2021 at 10:22:17PM +0100, Tom Smyth wrote:
> Hello,
>
> 1) issue does not occur with fvwm or with chrome running in fvwm
>
> so the issue seems to be confined to xfce, and I was running just 1
> xfce terminal session
> 2) (so the issue is not related to chromium)
>
> > > I'm run
On Mon, May 03, 2021 at 08:51:51PM +, Karsten Pedersen wrote:
> It is worth noting that you can move (not copy) UNIX sockets (again,
> so long as they are on the same filesystem).
>
> So, once Xephyr has started up, you can move the socket from
> "/tmp/.X11-unix/X1" into "$CHROOT/tmp/.X11-unix
Hello,
I have two ISPs where one connection is primary and the other is low-bandwidth
for temporary failover only. ifstated handles the failover by simply changing
the default gateway. But under normal conditions I want to be able to connect
via either connection at any time without changing th
> On Feb 23, 2024, at 10:33, Tom wrote:
>
> command `ssh user@fe80::262:bff::@em0` works just fine.
>
> `ssh -J user9001@jumpserver user@fe80::262:bff::%em0`
Don’t know if this is the problem, but I notice your two addresses are
different. Notice @em0 vs %em0.
:
option option-133 "my-option-133-text”;
option option-129 1:54:c9:2b:47;
I’ve also tried `option-66`, `66`, putting it in different sections of the
.conf file.
Am I missing something?
Thanks,
Ian
Tested on an F71882 (at 0x2e; GENERIC only configs it at 4e).
The voltage dividers register is full of lies, so the part of this
patch that reads it can be ripped out (along with the temperature
diode offset bits, I guess). These chips also have a watchdog
timer. I can set it and watch it counti
Dear Misc,
I have an issue with growth of UDP syslog outstripping performance of my box.
Am running GENERIC#1368 amd64 as a VM on ESX. It is a task oriented box with
no X/GUI & I can allocate more mem if required.
# netstat -s -p udp
udp:
797597485 datagrams received
0 with incomp
I just inherited this AOD250 and put 6.4 up on it. Got it to the point
where it mostly works, except suspend (zzz or lid close) doesn't resume
- it reboots instead when you press a keyboard key.
I'm unable to tell if the problem is hardware (eg specific to this one
unit) or software (old AC
On 4/6/19 1:45 PM, tfrohw...@fastmail.com wrote:
I run a dual-boot with Windows 10 on the same partition and the section that
you want removed was extremely helpful at the time. That is_with_ softraid
encryption of the OpenBSD partition.
Setting this up is not for the faint of heart and you h
Hi,
What is the contents of your ~/.xsession & ~/.xsession-errors files?
I had this same issue, and was able to solve it by removing .xsession
or replacing it with an empty file.
Ian
On 5/23/19 7:51 AM, Roderick wrote:
I wonder that no one noted this bugs before: are there no new people
installing OpenBSD? Or it is a problem only with VMWare?
Yes, the fact that nobody else has run into your problem suggest that it
might in fact be your problem. Or your provider may be doin
On Sat, May 25, 2019 at 12:07:40AM +0200, zeurk...@volny.cz wrote:
> [not subscribed, please Cc, thanks.]
>
> OpenBSD 6.5 (GENERIC) #1338: Sat Apr 13 15:07:04 MDT 2019
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
Hi,
Thank you for your dmesg, however, in the future would
On 6/20/19 5:31 PM, Theo de Raadt wrote:
It just doesn't stop.
Maxim Bourmistrov wrote:
I'd say this whole project is your milking cow.(Having a good times biking??)
You really don't move froward much. Except poor guy trying to fix net stack.
You move around vars, back and forward. But real
httpd currently fails to serve over TLS if the certificate file
specified in httpd.conf contains an intermediate certificate ahead of
the site's certificate. httpd still starts with no error indication
(with rcctl) but `httpd -d` shows:
server_tls_init: failed to configure tls - failed to load pri
nk* I know which it'll use as the
> server cert, and what it'll do with other certs in file, but
> a) I haven't tested it and
> b) more importantly, reyk@ hasn't documented a behavior and thereby
> decided it's supported, in some sense.
I'll try and see if I can implement it, I don't believe it's too
complicated. Maybe adding an 'intermediate-cert ' option in
httpd.conf
Ian
On Tue, Sep 13, 2016 at 12:05:53AM -0700, Philip Guenther wrote:
> See, here's where you're taking a wrong turn that I should have caught
> earlier: your first post should answer this question:
> What problem are you trying to solve?
>
> httpd may be able to do what you want *already*, bu
On Tue, Sep 13, 2016 at 09:50:43AM +0200, Robert Klein wrote:
> Did you try to /append/ the intermediate certificate(s) to the server
> certificate? That worked for me on OpenBSD 6.0's httpd.
Yes.
Uncanny timing on your mail -- I just got it to work. httpd(8) needs the
intermediate certificate t
this makes Xorg unusably
slow.
If anyone can point me in the right direction for fixing this, I can
work on a patch.
Here is my Xorg.0.log with no config specifying glamor (buggy):
https://ce.gl/radeon-exa.txt
Here is the same but with glamor-specifying config file:
https://ce.gl/radeon-glamor
W, I used the following info to get set up:
https://www.openbsd.org/faq/faq14.html#softraidDI
http://openbsd-archive.7691.n7.nabble.com/Large-3TB-HDD-support-td95308.html
Thanks,
-- Ian
bsd.das.ufsc.br/i386.html#hardware
Thanks,
-- Ian
P.S., Karel, many Americans confuse loose/lose. :)
On Tue, 18 Apr 2017, Karel Gardas wrote:
> loose -> lose. Sorry not native English speaker here.
>
> On Tue, Apr 18, 2017 at 6:09 PM, Karel Gardas wrote:
> > How much data
espectively.
So through some combination of:
* CPP multi-string define with unclear hex escapes prepended
* printf() call with one too many parameters
* undocumented %b printf() token
We get this handy functionality where names of intr. statuses are
derrived from their associated bit positions and conditionally printed
when set.
Does anyone have any idea of why this works the way it does?
Ian
If you are fluent in two or more languages you might be able to help
out with translations. Bug-hunting (with proper reporting habits!) is
always appreciated too.
On Fri, Nov 14, 2014 at 6:33 PM, Jeremy wrote:
> Hello,
>
> I very much believe the OpenBSD is important and needs support. I am not a
whenever i grab a snapshot and get library version mismatches after a
`pkg_add -u`, i've found the easiest way to get those objects is grab a
fresh source tree and compile them manually. for example, libc:
cd /usr/src/lib/libc
edit 'shlib_version' to have the appropriate major/minor versions
(pkg
On Fri, Dec 12, 2014 at 2:02 PM, Ingo Schwarze wrote:
>
> There are dragons.
>
ingo, theo:
sorry to post toxic advice, and thanks for the knowledge. i did not realize
how shlib_version worked. i must have gotten lucky with my build but i
should go back and fix it properly now
ian
and my device was properly created with the resultant
MAKEDEV
script.
Ian
he 'master' branch should always compile with strict flags, while the
'devel' one is more of my own day-to-day sandbox.
very excited to be working with you all and hope to continue after GSoC
ends!
ian
localed, and timedated as well as a framework for porting the
logind behemoth. you can follow the progress at
https://uglyman.kremlin.cc/gitweb/gitweb.cgi?p=systemd-utl.git
ian
> that doesn't make the slightest sense.
>
> "pure C" can be and often is perfectly portable.
those were not the right words, i meant to convey that because systemd
uses its own DBus binding (and not an already-ported lib like
GIO/GDbus) it would be difficult to port, as that binding is seemingly
e will still have to
stand up to the usual caliber openbsd ports are subject to, there are no
special guarantees because i am a gsoc student.
thanks
ian
> refering to http://www.openbsdfoundation.org/ does not contain, as far as
http://www.openbsdfoundation.org/gsoc2014.html
> software that you speak of be portable to Linux or is it BSD only? I've
i am planning (post-GSOC) on writing an archlinux PKGBUILD and
eventually a debian package.
staying the hell away from systemd and making its existence a
non-issue for luckier operating systems. that's what this whole
project is about; if you actually care about the direction it's
taking, please feel free to read my code and mail me with whatever
issues/bugs you can find -- i'll happily review and patch them in.
ian
On Thu, Sep 25, 2014 at 8:50 PM, Andrew Lester wrote:
> Would the /bin/sh shell in OpenBSD, which is a "reimplementation of bash" be
> affected by either of these exploits? So happy to learn no action is needed
> on my part for my OpenBSD sever :)
/bin/sh is an implementation of *the bourne she
On Wed, Oct 15, 2014 at 4:47 PM, Kevin Chadwick wrote:
> On Sat, 11 Oct 2014 13:38:49 -0400
> Ian Grant wrote:
>
>> No, the "pre-shared keys" are communicated over the VPN, as are the
>> keys which encrypt the VPN's own data as it appears in the actual T
fic analysis isn't a thing, then. Otherwise
> they'd be able to check if traffic purporting to go to port 80/443
> doesn't look like HTTP traffic, or something.
They don't have any clue which traffic to analyze though, so this
traffic is a needle in a haystack. Also, the VPN could be tunneled
over HTTP if necessary.
Ian
want to
argue, and you aren't sure of your argument, e-mail me off the list.
Otherwise it just adds to the general level of confusion, which is
already higher than I'd expected on this list.
Thanks,
Ian
itions from the USA?
Ian
Foundation paper:
http://livelogic.blogspot.com/2014/10/the-foundation-parts-iii-iii.html
> I believe that
> OpenBSD does that. But don't expect them to add
> a security through obscurity layer to their kernel because I
> guess they wont.
Well, "they" don't have a choice, because OpenBSD is open source, or
haven't you heard?
Ian
On Sat, Oct 18, 2014 at 11:36 AM, Reiner Jung wrote:
> On Fri, 2014-10-17 at 16:52 -0400, Ian Grant wrote:
>> On Thu, Oct 16, 2014 at 9:15 AM, Bob Beck wrote:
>> > We have released LibreSSL 2.1.1- which should be arriving in the
>> > LIbreSSL directory of an OpenBS
"This is one way die-hard Linux users can find out what the word
"engineering" really means. They can learn about OpenBSD without
rebooting either their machines, or their minds.
First read the man pages. OpenBSD man pages aren't documentation,
they're literature, so you need to see them nicely fo
would
have a hard time dealing with USBstickNet traffic. high-latency, but
massive bandwidth :-)
Ian
On Mon, Oct 20, 2014 at 8:33 AM, Giancarlo Razzolini
wrote:
> On 19-10-2014 21:01, Ian Grant wrote:
>
> On the contrary: it _will_ make it impossible for people to know what
> _we_ are doing. This is not one system I'm talking about: it's
> countless independent VPNs. N
On Mon, Oct 20, 2014 at 8:01 PM, Giancarlo Razzolini
wrote:
> On 20-10-2014 21:52, Ian Grant wrote:
>>
>> How else can one protect a system from DoS attacks, other than by
>> concealing it some way? And what is cryptography if it's not
>> concealing the meanin
5.6 arrived today in syracuse, new york. right on time, just as usual. :)
On Wed, Oct 29, 2014 at 12:44 PM, Theo de Raadt wrote:
>>Hopefully you agree that the file name "snapshots/amd64/install56.iso"
>>is misleading? Looking at the file name I had assumed/hoped there is some
>>kind of upgrade p
On Wed, Sep 08, 2021 at 11:24:18AM +0200, jim hook wrote:
> test$ cd
> rmplayer
> test$
> test$ type cd
> cd is a function
> test$
> test$ tail -4 .profile
> cd()
> {
> echo rmplayer
> }
> test$
> test$ uname -mrs
> OpenBSD 6.9 amd64
> test$
>
> Thinking of that home dirs could be on a shared stor
On Fri, Oct 15, 2021 at 05:05:01PM +0200, Jan Stary wrote:
> Does any of the OpenSBD-supported platforms boot off nvme storage?
> So far, I have been able to use nvme storage as a disk,
> but not boot from it; but my HW is far from recent.
The Framework laptop (https://frame.work) boots fine off a
On Wed, Dec 01, 2021 at 01:39:39PM +0530, Sandeep Gupta wrote:
> Hello,
> All partitions except for /dev/rsd1c and /dev/rsd1i are clean.
> For /dev/rsd1c , I get "BAD SUPER BLOCK: MAGIC NUMBER WRONG".
> For /dev/rsd1i, I get "UNEXPECTED INCONSISTENCY".
If that's the case, you are probably done
> > > I am working on OpenBSD 7.0, x86_64. I'm trying to script an install
> > > of developer tools I use, like GCC and Git. When I attempt to install
> > > GCC I am prompted:
> > >
> > > $ sudo pkg_add gcc g++
> > > quirks-4.54 signed on 2022-01-09T19:08:35Z
> > > Ambiguous: choose pa
On Mon, Jan 10, 2022 at 06:28:38PM -0300, Crystal Kolipe wrote:
> On Mon, Jan 10, 2022 at 07:15:25PM +0100, Andreas Kusalananda Khri wrote:
> > Which one is the "latest" here?
> >
> > $ doas pkg_add bogofilter
> > doas (kk@box) password:
> > quirks-4.92 signed on 2022-01-07T13:45:06Z
>
> Could we please get vi into base? Even the most basic version would do.
um, vi has been in base for years.
It has not been in the install media, which are chronically short out of room.
I would not advise you to hold your breath for vi to appear there in the next
week or so.
It doesn't take t
On Mon, Apr 04, 2022 at 08:32:01AM -0700, Eric Thomas wrote:
> I want to have a high degree of confidence in my system's state
> (packages that have been added, configs that have changed, permissions
> changed, etc). I've read about "read only filesystems" and the
> pro's/con's [here](http://geodso
On Wed, Apr 20, 2022 at 08:39:09PM +0200, Harald Dunkel wrote:
> Hi folks,
>
> the upgrade guide claims
>
> A detailed cleanup can be done with the aid of the sysclean package.
>
> sysclean lists 4180 files and directories on my home server, including mail
> directories, config files of va
On 5/7/24 1:09 PM, Страхиња Радић wrote:
Дана 24/05/07 04:08PM, Martin Kjær Jørgensen написа:
I was wondering which programs you use for
replicating/copying/syncing environments/configs on your openbsd
systems with between your desktops (home or work) and laptops?
git(1), rsync(1).
git push a
1 - 100 of 141 matches
Mail list logo
