Re: compatibility with AR5B95 | AR5B97

On Wed, Apr 08, 2015 at 04:20:18PM +0200, Raffaele Roberta wrote: > can somebody help me to find out if the half mini pci-e card with the > AR5B95 AR9285 or AR5B97 AR9287 chips are compatible whit OpenBSD? > > or someone can advise me on a half board mini pci-e alternative that works > as AP... >

Re: compatibility with AR5B95 | AR5B97

On Wed, Apr 08, 2015 at 05:00:57PM +0200, Raffaele Roberta wrote: > I've read the documentation, but all the cards that I have found have the > AR5B97 with AR9287 chips or AR9285 with AR5B95 chips. I believe you're confusing chipset names with product names. What matters is the chipset, not any o

Re: OpenBSD on iMac

On Fri, Apr 17, 2015 at 09:06:55AM +0200, Martijn van Duren wrote: > 3) When doing an ifconfig athn0 scan I get a kernel panic. Because my USB > keyboard stops working after the panic I can't provide a trace. I don't need > wifi on this system, so this isn't an issue with me. > athn0 at pci3 dev 0

OpenBSD 5.7 Released

den Markatchev, Nicholas Marriott, Nick Holland, Nigel Taylor, Okan Demirmen, Otto Moerbeek, Pascal Stumpf, Paul de Weerd, Paul Irofti, Peter Hessler, Philip Guenther, Pierre-Emmanuel Andre, Raphael Graf, Remi Pointel, Renato Westphal, Reyk Floeter, Robert Nagy, Robert Peichaer, Ryan Tho

Re: iwm0: fatal firmware error / could not initiate scan

On Mon, May 04, 2015 at 08:56:08AM +0100, Dennis Davis wrote: > > iwm0: hw rev: 0x140, fw ver 25.228 (API ver 9), address f8:16:54:dd:a7:0c > > iwm0: fatal firmware error > > iwm0: could not initiate scan > > Don't have an iwm interface. But is the firmware installed? Yes, the firmware is instal

Re: Pidgin crashes when trying to paste text

On Sat, May 09, 2015 at 02:10:14PM +0100, sam wrote: > Hello, > > When using Pidgin on ports (system, etc. = -current), I have found that > Pidgin consistently crashes when pasting information from websites. > This happens in particular with guardian.co.uk. Looks like you're using the gtkspell fl

Re: swap on encrypted softraid, performance penalty?

On Sun, May 17, 2015 at 12:20:52AM +0200, Fredrik Alm wrote: > I’ve seen a few “whole disk encryption” tutorials which puts the swap outside > of the partition used for the softraid encryption, since openbsd already > encrypts the swap partition anyway. I assume that by putting the swap inside >

Re: Apache2 on 5.7 = certificate error

On Mon, May 18, 2015 at 10:04:03AM -0400, John Merriam wrote: > I get the following error in the error_log when I try to start Apache2: > > [Mon May 18 09:51:43 2015] [error] Failed to configure CA certificate > chain! > > The certificate is a wildcard certificate from RapidSSL. > > I have thei

Re: 5.7 bootloader hang on Toshiba Portege M400

On Tue, May 19, 2015 at 10:10:51PM -0500, Adam Thompson wrote: > Trying to install OpenBSD 5.7-RELEASE amd64 onto a Toshiba Portege M400, > with no success - the bootloader hangs right after printing out "fd0 hd0+". > A (very) quick perusal of boot-related manpages doesn't suggest anything I > can

Re: if_iwm.c on 5.7 -stable

On Wed, May 20, 2015 at 07:48:26PM +0200, Marko Cupać wrote: > I guess I'll have to go -current. Or try this patch: http://marc.info/?l=openbsd-misc&m=143073425730338&q=raw

Re: CPU power consumption on thinkpad x201

On Wed, May 20, 2015 at 08:56:57PM -0600, Shaun Reiger wrote: > Hello I'm trying to find out if the power consumption relating to the > intel_powerclamp driver ("Package Level C-state Idle Injection for > Intel CPUs") was ever fixed. I'm current running 5.7 stable and I find > my cpu is still consu

Re: Softraid question

On Sat, May 30, 2015 at 08:07:07PM -0600, Duncan Patton a Campbell wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA256 > > > So now I'm in recovery mode and it is doing about 1% per hour > (it's a 2Tb raid1). Is this normal That's normal. Just let it run until it's done. You can reboot th

Re: Thinkpad E550

On Mon, Jun 01, 2015 at 03:41:24PM +, Sébastien Morand wrote: > Hi, > > I got a Lenovo Thinkpad E550. I installed -current and everything looks > fine except a few things: > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wirelsss AC 3160" rev 0x93, So 3160 intel cards work fine? Excellent! F

Re: Blob-free OpenBSD kernel needed

On Fri, Jun 05, 2015 at 08:11:17PM -0400, countryg...@safe-mail.net wrote: > Hello, > It has come to my attention that OpenBSD does not included non-free drivers, > dubbed "blobs" - which is excellent. However, you still include non-free > firmware in the kernel and some packages. > > With spyi

Re: Blob-free OpenBSD kernel needed

On Sat, Jun 06, 2015 at 12:44:55AM -0300, Michel Behr wrote: > If you want HW freedom, I think the viable way is this: > https://www.crowdsupply.com/purism/librem-15#products-top Nice try but I don't think countrygeek would be happy with this machine. """ What About the BIOS and firmware? Though

Re: alix 1e - 2,4/5 GHz Wifi card

On Sun, Jun 07, 2015 at 05:55:16PM +0200, s...@asm68k.org wrote: > - provide a network in the 2,4 GHz and the 5 GHz > bandwidths at the same time We don't support this. To fulfill this requirement you'll need two cards. > - has just one antenna (the alix 1e has just one slot for antenna) And y

Re: WiFi BCM43224 not configured!

On Wed, Jun 17, 2015 at 01:04:03PM +0330, Mohammad BadieZadegan wrote: > Hi, > I have BCM 43224 WiFi card on my Dell-E6410 notebook But not detected when > I run ifconfig! > # dmesg | grep BCM43224 > "Broadcom BCM43224" rev 0x01 at pci3 dev 0 function 0 not configured > "Broadcom BCM43224" rev 0x01

Re: WiFi BCM43224 not configured!

On Wed, Jun 17, 2015 at 12:47:57PM +0200, Jérémie Courrèges-Anglas wrote: > IIUC BCM43* nics could have been supported if development efforts hadn't > been killed by licensing issues. I doubt there are developers who want > to work on this anymore. You're probably referring to the b43 Linux drive

Re: Is PFSync over IPSec still broken?

On Thu, Jun 18, 2015 at 03:44:24PM +0200, Łukasz Czarniecki wrote: > Hi, > > I have the same problem described here: > > http://openbsd-archive.7691.n7.nabble.com/pfsync-over-ipsec-is-broken-td257496.html#a257681 > > My system is 5.7 i386 > > I have keep state (no-sync) on all local terminated

Re: Extend RAID 5

On Sun, Jun 21, 2015 at 09:23:40PM +0200, Noth wrote: > Sorry to hijack the thread but when I read that RAID5 was coming I had to > test it in a VM. Unfortunately the bootloader can't read the disklabel for > sr0a (the whole OS is on a 3 disk RAID5 softraid disk). Is this normal at > this stage? Y

Re: SOHO IPv6 router problems

On Wed, Jul 01, 2015 at 11:57:01PM +0200, Patrik Lundin wrote: > ff02::/16 ::1UGRS > 00 32768 8 lo0 > ff02::%em0/32 fe80::d250:99ff:fe51:78e8%em0 UC > 10 - 4 em0 > ff02::1:2%em

Re: SPARC minimum hardware specification

On Sun, Jul 19, 2015 at 09:56:35PM +0200, Karel Gardas wrote: > On Sun, Jul 19, 2015 at 7:51 PM, Raul Miller wrote: > > Suggests that we're talking 320 watts, and 7.3 db acoustic noise. > > 320 watts should not be showstopper, but 7.3 db certainly is. I do > have T2000 which is ~62 dB(A) and this

Re: dmesg: Intel Atom C2758 - SuperMicro A1SRi-2758F with LSI SAS9211-8i

On Mon, Jul 27, 2015 at 10:59:02AM -0500, Aaron Poffenberger wrote: > dmesg from a box that was en route to becoming a FreeNAS system. Everything > I cared about as far as networking and disk management worked with one > issue. smartctl was uneven about whether it get could get stats from the > dis

Re: Sluggish/laggy browser behaviour

On Mon, Jul 27, 2015 at 08:58:54PM -0500, Yass Amed wrote: > This problem is NOT specific to this model or any other machine (as far as I > experienced). > This issue was present on a few towers and still is on an Intel/Asus{1} based > machine. > You can try debugging FireFox or Chromium with gdb

Re: Sluggish/laggy browser behaviour

On Tue, Jul 28, 2015 at 04:17:16PM +0200, Benjamin Baier wrote: > I might have gotten luky but this Thinkpad X220 plays 720p Youtube HTML5 > video in Chromium without glitches, even on fullscreen. > As long as there is no other system load. I've only tried firefox. AFAIK chromium makes some use o

Re: Current USB Wifi status

On Fri, Aug 07, 2015 at 08:02:13AM +0100, Bernd Schoeller wrote: > Hi, > > I would love to start using my OpenBSD router as access point. In 2013, it > was noted that using USB with Hostap is not a very well supported: > > http://marc.info/?l=openbsd-misc&m=136650077623629&w=2 > > Has the situat

Re: Current USB Wifi status

On Wed, Aug 12, 2015 at 12:48:20PM +0200, Benny Lofgren wrote: > and one open "honey pot" network that I'm having fun with > to see who tries to get internet access with any open wlan they can > find. Surprisingly many, in fact... but they're only greeted with a web > page with bright red backgroun

Re: Setting a git http server with httpd(8): directions needed

On Fri, Aug 14, 2015 at 11:51:46AM +0200, Alessandro DE LAURENZIS wrote: > This is the content of the /var/www/git directory: > -r-xr-xr-x 1 root daemon 884442 Aug 14 10:23 git-http-backend This is not a static binary. So to use it in chroot you have to copy shared libraries it needs into chr

Re: Schenker S405 experience

On Sat, Aug 15, 2015 at 05:53:14PM +0200, Thomas Bohl wrote: > WLAN: > Pre install options were Intel Wireless-AC 3160 or 7260. So I ordered > without WLAN and bought a Ralink RT3090 (SilverStone ECW01) separately. > Works perfectly. Water under the bridge now, but these intel cards are supported

Re: Openbsd 5.7: IPv6 autoconf not working

On Mon, Aug 17, 2015 at 03:55:09PM +0900, Alexandre Westfahl wrote: > Hello, > > I have a problem with IPv6, I'm not getting "public" IP but router > advertisement/solicitations are being exchanged. I believe your problem is that OpenBSD 5.7 does not accept router advertisements (RA) if IPv6 forw

Re: Support for Netgear WNA1000Mv2 USB wireless adapter

On Sat, Aug 22, 2015 at 11:57:42AM +0100, Mark Willson wrote: > Is it appropriate to send this information as a suggested enhancement > via sendbug(1)? Already taken care of. Thank you.

Re: Booting problem of my OpenBSD 5.7 road warrior

On Sun, Aug 23, 2015 at 03:06:40PM +0800, Zhi-Qiang Lei wrote: > My road warrior has a PPPoE external connection and a tunnel connection, > established with OpenVPN, which would encrypt the packets from some special > devices. > > It works so well so far with the help with these rules in /etc/pf.c

Re: dmesg: shuttle ds57u (only wlan defunc)

On Mon, Aug 24, 2015 at 05:14:11PM +0200, Marcus MERIGHI wrote: > CCing misc@ because there's no public access to dmesg@. > vendor "Realtek", unknown product 0x8179 (class network subclass > miscellaneous, rev 0x01) at pci3 dev 0 function 0 not configured FYI, wifi is RTL8188EE, a chip which bel

Re: Intel Edison

On Thu, Aug 27, 2015 at 08:42:41AM +0100, Gareth Nelson wrote: > So the question now becomes the same, but without bluetooth. You don't happen to have any link for us to detailed HW specs? Or a Linux dmesg?

Re: Intel Edison

On Thu, Aug 27, 2015 at 09:43:44AM +0100, Gareth Nelson wrote: > Wifi chipset info here: > http://www.adafruit.com/datasheets/EdisonDatasheet.pdf wifi is Broadcom BCM43340 which is not supported. Linux supports it via the brcmfmac driver. Furthermore, this chip is on an SDIO bus. There is some su

Re: bluetooth keyboard [was:Re: Intel Edison]

On Fri, Aug 28, 2015 at 05:51:39AM -0400, Quartz wrote: > Basically, let's say I buy a bluetooth keyboard. Let's say it's a fancy > model and is nice enough to come with a generic usb->bluetooth nub/dongle > thingy I can plug in if my computer doesn't already have bluetooth > capabilities. I plug i

Re: Another working USB WiFi adapter:

On Thu, Sep 03, 2015 at 08:53:11AM +0100, Craig Skinner wrote: > For the archives, > > A friend loaned me this while I gave an Unbound & NSD talk in a pub: > > TP-Link TL-WN722N "High-Gain 150Mbps" > > athn1 at uhub0 port 2 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 2 > athn1: AR9271 rev 1 (1T1R),

Re: Another working USB WiFi adapter:

On Fri, Sep 04, 2015 at 02:52:19PM -0300, Henrique Lengler wrote: > It has been difficult to me to figure out what causes this error, and > try to reproduce it, it looks totally random, some days I get a lot of > timeouts, others I get no one. A "device timeout" means that an outgoing packet could

Re: usb wifi wpa2 enterprise

On Sat, Sep 05, 2015 at 09:06:28AM +, Stuart Henderson wrote: > The bigger challenge is accurately identifying a chipset before purchase, > but they're pretty cheap so it isn't usually a big hardship if a particular > device doesn't work. And it's never a bad idea to offer unsupported devices

Re: Looking for assistance with rtwn(4) on 5.8

On Wed, Sep 09, 2015 at 07:57:11PM -0400, Nickolas P. O'Malley wrote: > Hello, > I'm new to the OpenBSD community and mailing list, so please forgive me if > this is the wrong list to ask. > I decided to install a snapshot of 5.8 on my workstation today, because I > found out that it features a n

Re: dmesg (current) MacBook Air 5,2 (2012) Intel 1.8

On Wed, Sep 09, 2015 at 09:43:44PM -0500, Aaron Poffenberger wrote: > Occasional problems with loading firmware for urtwn as seen near the end of > this dmesg: > urtwn0: could not load firmware page 1 > > I've also seen the same message for page 0. Interesting. I don't think I've seen this befor

Re: file sets and CVS tree

On Wed, Sep 16, 2015 at 09:27:25PM +0100, Mark Carroll wrote: > When I first install OpenBSD there is a phase where I choose file sets > like base57.tgz which it then downloads and untars. Then for upgrades I > can check out the CVS tree and build and install the patch branch or > whatever. > > On

Re: ugen0 instead of urtwn0

On Mon, Sep 21, 2015 at 11:14:22AM +0200, Thuban wrote: > Hi, > I have a usb wifi dongle supposed to work with urtwn firmware. > usbdevs returns WNA 1000Mv2 Netgear listed here [0] > > But the device is detected as ugen. > > How can I fix this? This device was added to -current after 5.8. It wil

Re: Making IPv6 NAT prefer privacy address

On Thu, Sep 24, 2015 at 05:25:31PM -0300, Giancarlo Razzolini wrote: > The fact is, that OpenBSD and the other OS's should prefer > privacy address for everything (even pf itself). This already happens on > some linux configurations, where you have a semi stable privacy address > any given time on

Re: wifi profiles in hostname.if

On Sat, Sep 26, 2015 at 07:44:45AM -0600, Chris Lobkowicz wrote: > Good day, I am curious if there is the possibility of adding/using multiple > profiles or network entries, much like ~/.ssh/config ? > > eg: > > In /etc/hostname.iwn0 > > nwid primary > wpakey key > dhcp > > ???nwid ???secondary

Re: Trouble applying patch 003 to OpenBSD 5.8-stable

On Sun, Feb 21, 2016 at 12:15:04PM -0800, Andrew Lester wrote: > Hi all, > > I'm setting up OpenBSD 5.8-stable and installing the patches for the known > errata. I'm buying the CD set but installed with the install58.iso from a > mirror. As such I don't think the bad src.tar.gz on the CD will affe

Re: how to Bridging with a wireless NIC

On Tue, Feb 23, 2016 at 08:07:31PM +0900, Tuyosi Takesima wrote: > auto wlan0 > iface wlan0 inet dhcp > wpa-ssid URoad-9BF > wpa-ap-scan 1 > wpa-key-mgmt WPA-PSK > wpa-psk 4955 > # iw wlan0 info > command failed: No such device (-19) I don't understand how iw can fail like this if you have wlan0

Re: how to Bridging with a wireless NIC

On Fri, Feb 26, 2016 at 05:15:19AM +0900, Tuyosi Takesima wrote: > TV get 192.168.0.10 >gateway adress 192.168.0.1 >dns8.8.8.8 > > how to rerite pf.conf inorder to access TV from 192.168.10.0/24 ? You could try using rdr-to. Something like this might work: pass in

Re: WoL on em interface

On Tue, Mar 22, 2016 at 07:44:05PM -0400, Jiri B wrote: > I wanted to go 'green' and thus I've thought de facto standard > 'em' interface supports wake on lan (WoL). > > $ grep -n -i wol ~/cvs/openbsd-src/sys/dev/pci/if_em* > /home/jirib/cvs/openbsd-src/sys/dev/pci/if_em_hw.c:1150:

Re: ThinkPad X260 or other Skylake Laptop

On Mon, Mar 28, 2016 at 05:04:02PM -0700, Bryan Vyhmeister wrote: > Is there a way screen brightness can still be adjusted in > some form even with wsfb(4)? wsconsctl display.brightness should work.

Re: Ad-hoc wifi on athn(4)?

On Sat, Apr 02, 2016 at 10:37:07PM -0500, Ax0n wrote: > I'm working on a project with a local group that involves running a bunch > of systems in Ad-Hoc mode to form a mesh network. I was hoping to join my > daily driver to the mesh, but I'm not seeing any way to get Ad-Hoc/IBSS > mode enabled on a

Re: Ad-hoc wifi on athn(4)?

On Sun, Apr 03, 2016 at 07:29:09AM +0200, Stefan Sperling wrote: > The following drivers advertise IBSS support in their man pages: > > acx(4), an(4), ath(4), atu(4), atw(4), ipw(4), iwi(4), pgt(4), > ral(4), rtw(4), rum(4), ural(4) Just in case you are considering ath(4) from th

Re: Belkin PCMCIA wifi

On Wed, Apr 13, 2016 at 11:56:46PM +0200, hans wrote: > I have this Belkin card (model F5D8010) > which reports on current/amd64 as > > unknown vendor 0x17cb product 0x0001 (class network subclass ethernet, rev > 0x01) at cardbus1 dev 0 function 0 not configured > > but does not show up as an in

Re: iwi and rsu driver not working in 5.9

On Thu, May 05, 2016 at 08:46:26AM +0200, Boris Rieken wrote: > I have two laptops that use the iwi driver for their Intel wireless > interfaces and I have an usb wifi dongle that uses the rsu driver. Under 5.7 > and 5.8 these work perfectly. But under 5.9 I cannot connect to a wireless > network.

Re: iwi and rsu driver not working in 5.9

On Thu, May 05, 2016 at 11:09:27AM +0200, Stefan Sperling wrote: > You need this commit to fix iwi on 5.9. > Not sure about rsu(4) but perhaps this will fix it, too. You can now also build a kernel from the 5.9-stable branch to get this patch. > /usr/src/sys/net80211/ieee802

Re: non-wintel hardware choices

On Thu, May 05, 2016 at 05:30:21PM +0300, Gregory Edigarov wrote: > Hi everybody, > > if I want to build a non-wintel system with commodity running OpenBSD > without problems, what are my options? > preferably something non-apple also, which i will be able to connect > display, mouse, and keyboar

Re: Support for Realtek wifi card?

On Sun, May 08, 2016 at 01:36:48PM -0400, Paul Suh wrote: > There is a somewhat old message indicating that there isn't a maintainer for > Realtek WiFi cards on FreeBSD: > > > -recognized-in-9-0-9-1-RC2-and-10-Cu

Re: Two athn devices acting weird

On Sun, May 15, 2016 at 09:36:19PM +0200, LÉVAI Dániel wrote: > hostname.athn0: > ==8<== > media autoselect > mode 11g > chan 10 > nwid daniell > wpakey _ > wpaprotos wpa2 > mediaopt hostap > #nwflag hidenwid > inet6 eui64 > up > ##!/sbin/ifconfig athn0 media autoselect mode auto m

Re: tp-link tl-wn722n athn0: could not load firmware

On Mon, May 23, 2016 at 12:49:56PM +0300, Mihai Popescu wrote: > Hello, > > I have this usb2.0 dongle, TP-LINK TL-WN722N wireless device. I've got > it after I installed OpenBSD so I have run fw_update -a for firmware. > Still I get this error athn0: could not load firmware after plugin. > The man

Re: tp-link tl-wn722n athn0: could not load firmware

On Mon, May 23, 2016 at 02:46:16PM +0300, Mihai Popescu wrote: > > I believe this is a power management issue with ehci(4). > > Your device doesn't get enough juice to power up. > > Hmmm, it is the second Lenovo machine i have with usb issues. > > As far as you can tell, is it because of pure har

Re: bsd.rd got IP from DHCP, but no network, no sets

On Sun, May 22, 2016 at 07:53:10AM +0200, butresin wrote: > # dhclient dc0 > DHCPREQUEST on dc0 to 255.255.255.255 > DHCPACK from 192.168.1.1 > bound to 192.168.1.34 -- renewal in 43200 seconds. > > # ifconfig dc0 > dc0: flags=8843 mtu 1500 > lladr 00:10:a4:b9:bc:43 > groups egress >

Re: CRYPTO volume created, but appears as full

On Sat, May 28, 2016 at 06:15:35PM +0200, Robert Campbell wrote: > I followed the steps in the FAQ for setting up full disk encryption. > Everything goes according to plan until I attempt to write zeros to the > first megabyte of the new pseudo-device; as you can see below, dd informs > me that the

Re: CRYPTO volume created, but appears as full

On Sat, May 28, 2016 at 06:03:48PM +, Ivan Markin wrote: > Sebastien Marie: > > Do you run these commands on the ramdisk (bsd.rd) ? If yes, all the > > /dev/sd* aren't created by default. > > Why it is so? Can this be found somewhere in documentation? If the ramdisk shipped with all possible

Re: wifind(8) find your wifi

On Fri, Jun 03, 2016 at 03:22:19PM +0200, Kamil Cholewiński wrote: > Perhaps it's time that the best tool be chosen and made a part of the > base install? I've already seen like a 100 different OBSD WiFi scripts > floating around the 'net, and naturally I also have a DIY one. No scripts for this,

Re: wifind(8) find your wifi

On Sat, Jun 04, 2016 at 02:38:06AM +0800, Ray Lai wrote: > On Fri, 3 Jun 2016 15:52:34 +0200 > Stefan Sperling wrote: > > One thing we should probably fix first is roaming support in the kernel. > > Do you mean 802.11r support? No, that extension seems to be about moving

Re: Long life on SSD in a firewall environment

On Sun, Jun 19, 2016 at 11:56:57AM +0200, Sjöholm Per-Olov wrote: > Hi > > Does anyone know if there exist any list of recommendations about how to make > an SSD disk to live as long as possible when using it for firewall purpose on > OpenBSD? It seems that OpenBSD lack some features related to S

Re: Booting encrypted drive from another device

On Mon, Jun 20, 2016 at 02:00:20PM +0300, bootcr...@openmailbox.org wrote: > Hello! > > I have recently decided to use full disk encryption on my openbsd boxes. > > I've managed to do so and it's working, however for security reasons I want > to boot them from > another drive. > > Example: > I h

Re: httpd. chroot, security and user homepage

On Wed, Jun 29, 2016 at 08:15:35PM +0200, Johan Tärnklint wrote: > Seeking advice / security tips. > > Is it safe to create /var/www/htdocs/user1 and symlink to their home folder? > > Then set permissions to user1:www on /var/www/htdocs/user1 ? > > Does it break the chroot? Is it safe? Better s

Re: iwi0 firmware error

On Sun, Jul 10, 2016 at 02:28:32AM +0200, Xianwen Chen wrote: > Hello, > > I have not been able to use iwi0 on OpenBSD 5.9 i386 on ThinkPad R52. > > The firmware was installed via > # fw_update > > When I try to connect to an open wifi network: > # ifconfig iwi0 nwid HUAZHU-Hanting up > > I obt

Re: help: wireless mouse detected but not working

On Wed, Jul 20, 2016 at 03:14:10PM -0300, Michel Behr wrote: > Hi all! I'm trying to use a Logitech wireless mouse - it gets detected > (dmesg attached) but it doesn't work. The laptop has trackpad and it is > working OK. A regular USB mouse works simply plugging, but not a wireless > one. > > It'

Re: how would you troubleshoot your wifi?

On Thu, Jul 14, 2016 at 01:13:21PM +0800, Miles Keaton wrote: > iwm0: hw rev 0x140, fw ver 25.228 (API ver 9), address 5b:51:4f:a1:16:d9 > iwm0: fatal firmware error You got some answers already but they were all misleading. I believe I've already fixed this bug. Please verify my assumption by upg

iwm performance (was: Re: how would you troubleshoot your wifi?)

On Thu, Jul 21, 2016 at 08:25:11PM +0200, Andreas Bartelt wrote: > sorry, my response was not precise - the "fatal" error is gone now but the > observed performance problems are still there. I've already been told about iwm performance regressions compared to 5.9, so I'd like to make a statement (

Re: iwm performance

On Sun, Jul 24, 2016 at 01:09:26PM +0200, Andreas Bartelt wrote: > However, the wireless link via iwm(4) is currently almost unusable. > Overall throughput for multiple tcp connections typically between 0 and > 1 Mbit/s but mostly on the lower end, i.e., 0. Looking at the wifi environment you're

Re: iwm performance

On Sun, Jul 24, 2016 at 05:54:21PM +0200, Andreas Bartelt wrote: > On 07/24/16 15:28, Stefan Sperling wrote: > >On Sun, Jul 24, 2016 at 01:09:26PM +0200, Andreas Bartelt wrote: > >>However, the wireless link via iwm(4) is currently almost unusable. > >>Overall

Re: athn0: device timeout with AR9271

On Mon, Jul 25, 2016 at 09:57:38AM +, ML mail wrote: > Hi, > > I installed a USB Wifi card on my OpenBSD 5.8 firewall as AP and from time to > time there are timeouts which prevents any access to it anymore until I > either plug out and in the Wifi dongle again or reboot. > Please upgrade

Re: athn0: device timeout with AR9271

On Tue, Jul 26, 2016 at 07:57:46PM +, ML mail wrote: > Should I upgrade to -CURRENT? Yes!

Re: ispec - PSK - issues

On Thu, Aug 18, 2016 at 07:57:40PM +, Justin Mayes wrote: > Hello all - > > I was also recently trying to do a simple ipsec/l2tp vpn. I found that it > works fine for everything except my android 5.1.1 device. This problem and a workaround were already discussed here: http://marc.info/?l=op

Re: Installer overwrites partition table

On Wed, Aug 24, 2016 at 01:15:29PM +0200, Bertram Scharpf wrote: > Hi, > > first of all, I am an experienced OS installer and I did a > heck of partitioning in my life. Now I had some unused disk > space and I found it a good idea to install OpenBSD. > > The installers partitioning tool didn't of

Re: Recommendation about an Alfa usb wireless adapter to use it as HostAP

On Fri, Sep 02, 2016 at 10:41:31AM +0200, David Coppa wrote: > The Alfa AWUS036NHA it's based on the Atheros AR9271 chipset and > should be supported by athn(4). But hostap is broken in the USB athn(4) driver so it's useless as AP. Unless you wish to be hacking wifi drivers, if you want a happy A

Re: Ralink 802.11n Mini PCI

On Mon, Sep 05, 2016 at 12:15:28PM -0500, Patrick Dohman wrote: > Hello > > Hoping to determine what modern Mini PCI 802.11n adapters are supported by the > RT2800 chipset. In -current, the ral(4) driver supports RT3900E chipsets (with RT5390 and RT5392 MACs). These are more recent so perhaps eas

Re: Ksh line edition wrongly counts multibyte characters in 5.5-current

On Thu, May 22, 2014 at 02:46:49PM -0500, M Farkas-Dyck wrote: > At ksh prompt, type a multibyte character, and move or backspace over > it, for examples: > • "é", backspace, enter; "é" is visibly deleted, but ksh says "ksh: > �: not found" > • "é", home; cursor cuts into prompt > > Te

Re: Lenovo ThinkPad X220 WLAN support in -current

On Fri, May 23, 2014 at 02:18:13AM +0300, Alex-P. Natsios wrote: > Hello everyone, > > I have recently installed OpenBSD-current on my X220 and everything I > tested or cared about until now works exceptionally well except the > wireless network adapter. > > My variation of the X220 comes with a

Re: "ath0: unable to reset hardware" on ThinkPad X200s

On Fri, May 23, 2014 at 01:01:48AM +0200, Dennis den Brok wrote: > Hello misc@, > > I recently got my hands on a ThinkPad X200s. OpenBSD/i386 5.5 seems > to work quite well on it, apart from wifi: whenever I try to configure > a connection, the kernel says > > "ath0: unable to reset hardware; ha

Re: "ath0: unable to reset hardware" on ThinkPad X200s

On Fri, May 23, 2014 at 08:57:00PM +, Dennis den Brok wrote: > > Shot in the dark: Try reverting r1.53 of ar5212.c. > > > > cd /usr/src/sys/dev/ic > > cvs -R up -j 1.53 -j 1.52 ar5212.c > > > > and recompile the kernel. > > Unfortunately, this does not seem to have any effect. Then you'll nee

Re: Gnome 3, toad and my android phone

On Sat, May 24, 2014 at 11:54:41AM +0200, Nils R wrote: > Hi misc@, > > i'm currently trying to find an easy way to copy the pictures i made > with my android phone to my openbsd -current machine. To make things > easy, i installed the gnome, gnome-extras and toad (like advised in > [1].) > > M

Re: Gnome 3, toad and my android phone

On Sat, May 24, 2014 at 12:10:43PM +0200, Nils R wrote: > Now something else: in the description on undeadly, only toadd is added > to the pkg_scripts section, but i found that > > hotplugd_flags= > toadd_flags= > > is also needed to get automount to work. > > Is this missing in the de

Re: pf+voip

On Tue, May 27, 2014 at 01:59:07PM +0400, Швецов Михаил wrote: > Does pf have specific rules for voip, may be example of working pf_rule with > voip? > > Because for «standart rules» i have problems with voip. > > set skip on lo > > match out on pppoe0 from { em1:network } nat-to (pppoe0) > > b

Re: Apache2 config on OpenBSD 5.5

On Mon, Jun 02, 2014 at 10:41:33AM +0200, Markus Rosjat wrote: > Hey there, > > its kinda confusing to see config files all over the place. I can find files > in /etc/apache2 as well as in /var/www/conf. So first thing first. As I > notices apache 1.3 insnt used in OpenBSD 5.5 right? No. http://w

Re: Configuring wireless and dhcp with zyd on 5.4-release

On Sat, Apr 19, 2014 at 09:51:59PM -1000, Felix Johnson wrote: > I'm a bit new to OpenBSD and want to configure wireless networking, > as a client to an existing access point. > > The box has a clean install of 5.4-release from install54.iso. > The wireless device is a Belkin F5D7050 wireless G US

Re: bwi0: intr fatal TX/RX ([01]) error 0x00001000 (continuously streaming)

On Wed, Jan 15, 2014 at 03:41:07PM +0100, Martin Pieuchot wrote: > On 15/01/14(Wed) 15:27, Stefan Sperling wrote: > > On Wed, Jan 15, 2014 at 10:11:27AM +0100, Martin Pieuchot wrote: > > > On 14/01/14(Tue) 16:21, Sunny Raspet wrote: > > > > Hello! > > > >

Re: fxp driver - bsd.rd vs bsd

On Tue, Jun 24, 2014 at 03:47:27PM -0400, Stefan Olsson wrote: > Hi, > My colleague is after trying to install Current onto an old Dell PC several > times now. -She can go through the install without problem, she gets connected > with dhcp and can download the filesets, so obviously she has network

Re: ViewVC

On Tue, Jul 01, 2014 at 08:36:29PM -0400, Predrag Punosevac wrote: > I am trying to run ViewVC in the stand alone server mode on the new svn > server (OpenBSD 5.5 amd64). Since ViewVC is not in ports I downloaded > 1.1.22 package from CollabNet website. ViewVC keeps crashing when > while I browse

Re: immutable-ish version control repo?

On Thu, Jul 17, 2014 at 09:27:13PM -0500, Adam Thompson wrote: > I'm looking for a distributed VC system where even remote clients with > full(?) write access cannot, or at least would find it fairly difficult to, > alter history? > svn - definitely possible (AFAIK) to change the past. With r

Re: Routing tables and pf rules with using 2 DHCP WAN interfaces ...

On Mon, Aug 04, 2014 at 08:39:10PM +0200, Christophe wrote: > Hi misc@, > > I was wondering about the behavior of OpenBSD in this case (not a > production case at this time). > > 2 WAN interfaces (Ethernet / IPv4 DHCP) , linked to an OpenBSD box and 1 > LAN interface (Ethernet / IPv4 static addre

Re: Access Point Section of the faq

On Wed, Aug 06, 2014 at 01:06:54PM +, Stuart Henderson wrote: > On 2014-08-01, Mike Larkin wrote: > > I know other people have said that hostap mode is not > > stable but on this machine it's been rock solid. > > Historically there have been problems where a setup could be co

Re: OpenBSD 5.5-STABLE: Full Disk Encryption (bioctl) and Smard Cards

On Fri, Aug 22, 2014 at 08:01:27PM +0200, Julien Meister wrote: > So there is really really no way for the system to retrieve the key stored > on the smart card (using GnuPG) at boot in order to decrypt > the volumes? The boot loaders and the kernel only support softraid(4) keydisks created as par

Re: athn panic on 5.5-stable

On Sat, Aug 30, 2014 at 03:20:54PM +1000, mark hellewell wrote: > Hello, > > I have a Soekris net6501-50 with an Atheros AR9380 (model AR5BXB112) > wireless card attached to a Mini PCI Express slot. When attempting to > `ifconfig athn0 scan`, or otherwise interact with the interface, I > trigger

Re: low power device

On Fri, Sep 12, 2014 at 11:49:07PM +0200, Lars wrote: > On 12.09.2014 21:25, Josh Grosse wrote: > > > >Lars, it should fly. I'm running roundcube and an imap server on an > >Alix.2 (500Mhz Geode), using SSL, with a 4GB flash card as its back > >end store. It's not speedy, but it gets the job done

Re: How to procmail sort misc@openbsd.org?

On Fri, Sep 19, 2014 at 11:19:47AM -0400, Steve Litt wrote: > Hi all, > > I had the following procmail filter: > > 0: > List-ID:.*misc.openbsd.org > .OpenBSD/ > > The preceding didn't put this list's email in maildir folder > OpenBSD. Just to make sure there was nothing wrong with the OpenBSD >

Re: Atheros AR9380 Panic

On Sat, Sep 20, 2014 at 10:23:17PM -0500, Marc Suttle wrote: > Hello openbsd-misc, > > Long time OpenBSD user here. I was getting sick of using an external AP > for my pf based firewall and decided to try and get an athn device working > in AP mode. I am getting a panic on my Soekris 6501 with an

<    3   4   5   6   7   8   9   10   >