On Fri, Apr 10, 2020 at 09:35:16AM -0400, Nick Holland wrote:
> Question about kernel randomization and relinking...
>
> It seems to take a fair amount of RAM, at least for systems that
> are forced to run i386. And I mean real RAM -- swap doesn't seem
> to cut it.
>
> I discovered that severa
On Mon, Apr 13, 2020 at 07:03:27PM +0200, Mario Theodoridis wrote:
> Hi everyone.
>
> I'm running a APU2 board with an Atheros wlan chipset.
> I've been plagued by rather slow WLAN throughput rates < 10Mb/s.
> Is that normal or not. If not, how would i go about debugging this?
> Any other info i s
On Mon, Apr 13, 2020 at 10:42:18PM +0200, Mario Theodoridis wrote:
> > Also, athn(4) does not support Tx aggregation yet, and 40 MHz channels are
> > not yet suppored either. In practice this means the driver won't be
> > noticably
> > faster in 11n mode than it is in 11a/g modes. For now, I would
On Tue, Apr 14, 2020 at 11:37:24AM +0100, Kevin Chadwick wrote:
> On 2020-04-14 09:21, Stefan Sperling wrote:
> > Regarding other chipsets, if you want the fastest possible AP on OpenBSD
> > your best option right now is to get a bwfm(4) device, which offloads almost
> &
On Wed, Apr 15, 2020 at 06:45:26AM -0700, 0x6d6174 wrote:
> Hi everyone.
>
> I'm running also an APU2 board with an Atheros wlan chipset:
>
> athn0 at pci5 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 5 int 16
> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address XX:XX:XX:XX:XX:XX
>
> I also use
On Fri, Apr 17, 2020 at 12:08:39PM +0200, Jan Stary wrote:
> This is current/i386 on an ALIX (dmesg below) with
>
> athn0 at pci0 dev 12 function 0 "Atheros AR9280" rev 0x01: irq 9
> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 04:f0:21:01:d6:86
>
> # cat hostname.athn0
> inet 192.168.33.1
On Sat, Apr 18, 2020 at 08:06:10AM +0200, Unicorn wrote:
> Hello,
>
> I have a running installation of Nextcloud, installed via the OpenBSD
> package and set up according to the various pkg-readmes. The section
> about updating is kept very short, so I wanted to ask here before doing
> something u
On Sat, Apr 18, 2020 at 12:20:34PM +0200, Unicorn wrote:
> > I keep a nightly backup of the database (postgres in my case),
> > upgrade packages and trigger nextcloud's upgrade process via HTTPS
> > on the nextcloud login page. This process has not failed for me so
> > far. Except when postgres had
On Thu, Apr 23, 2020 at 02:52:09AM -0300, Anatoli wrote:
> How do the same drivers work in Linux? Can't "we" "just" "copy" the code
> from there?
That's already what we are doing.
But porting (what you call "just copying") code is a lot of work, too.
This stuff needs a lot of attention to detail
On Fri, Apr 17, 2020 at 12:08:39PM +0200, Jan Stary wrote:
> This is current/i386 on an ALIX (dmesg below) with
>
> athn0 at pci0 dev 12 function 0 "Atheros AR9280" rev 0x01: irq 9
> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 04:f0:21:01:d6:86
>
> # cat hostname.athn0
> inet 192.168.33.1
On Fri, Apr 10, 2020 at 10:25:14AM -0400, Nick Holland wrote:
> On 2020-04-10 10:10, Stefan Sperling wrote:
> > On Fri, Apr 10, 2020 at 09:35:16AM -0400, Nick Holland wrote:
> > FWIW, my soekris net5501 with 256MB of RAM and 512MB swap does manage
> > to relink a kernel
On Wed, May 27, 2020 at 08:09:29AM +, man Chan wrote:
> Hello,
> I tried to setup my Linksys WLAN (Ralink RT2560) as access point with
>
> mediaopt hostap
> nwid mynwid wpakey mywpakey
> inet 192.168.2.1 255.255.255.0
>
> When I ifconfig ral0, I got status: no network. Did I missing someth
On Thu, May 28, 2020 at 12:54:27PM +, MrPhyber wrote:
> Hello everyone,
> I just installed OpenBSD on my laptop, everything works except for the
> wifi card that happens to be an Atheros AR9462. Are there any future
> plans to support this card? For the moment I am using a wifi usb dongle.
Ope
On Sun, Jun 28, 2020 at 03:43:09PM -0600, Austin Hook wrote:
>
> I have a similar problem with the 6.7 release which I just installed today
> on an 8Tb drive I'm using with my older ASUS laptop.
>
> athn0 at pci3 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17
> athn0: AR9285 rev 2 (1T
On Mon, Jun 29, 2020 at 12:09:12PM +, Kapfhammer, Stefan wrote:
> Hi,
>
> I am using exactly the same WLE-200NX wifi card in an APU2B4. I have a
> BlackBerry KeyONE
> running at Android 8.1 / Version ABT975 which I use as hotspot for the APU2.
>
> After setting athn0 down, it is impossible t
On Sun, Jul 05, 2020 at 08:37:40PM +, Mogens Jensen wrote:
> I've installed OpenBSD 6.7 on a system that have an athn(4) wireless
> network adapter. Before setting up this device, I wanted to verify the
> configuration of pf, unbound etc. which required the interface to have
> an IP address, so
On Mon, Jul 06, 2020 at 11:10:13AM +, Kevin Chadwick wrote:
> With this patch I have been able to bring the device down and back up with a
> subsequently successful dhclient and http download.
>
> Annoying how quirky and poorly documented, chips often are!
>
> Thank You
>
Thanks for confir
On Thu, Jul 16, 2020 at 06:19:40AM +, Mogens Jensen wrote:
> I'm not trying to start a discussion on whether hiding the ESSID is
> ridiculous or not, I'm just testing different things, so I know which
> features work and which don't.
Thanks for digging into this. Since there are no automated t
On Thu, Jul 16, 2020 at 11:10:58AM +0200, Stefan Sperling wrote:
> Line 1927 of
> https://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/net80211/ieee80211_input.c?annotate=1.218
>
> This code runs before a response is generated for a probe request and it
> should ensure that a probe
On Mon, Jul 20, 2020 at 02:14:17PM +0800, Tito Mari Francis Escaño wrote:
> Good day to everyone at misc.
> Has anybody tried tried checking how OpenBSD worked with HP ProBook 445 G7
> with Ryzen 5 or 7 4000 and Intel AX200 WLAN card?
AX200 wifi will work. I would recommend -current for best resul
On Sat, Aug 01, 2020 at 09:16:55PM -0700, Bobby Reynolds wrote:
> Hi Misc!
>
> Just purchased an Intel AX200 so I could try out the new support in 6.7.
> First and foremost, many thanks to those working on the wifi stack :)
>
> I ran into some firmware issues with the 6.7 release, but I saw some
On Sun, Aug 02, 2020 at 11:58:26AM +0200, Stefan Sperling wrote:
> On Sat, Aug 01, 2020 at 09:16:55PM -0700, Bobby Reynolds wrote:
> > Hi Misc!
> >
> > Just purchased an Intel AX200 so I could try out the new support in 6.7.
> > First and foremost, many thanks to thos
On Sat, Aug 15, 2020 at 09:14:48AM +0100, Julian Smith wrote:
> I'm seeing fairly frequent (e.g. more than daily) failures from an iwn0
> wireless network device, on a Lenovo X230.
>
> dmesg|grep iwn shows:
>
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi,
> MIMO
On Sun, Sep 13, 2020 at 05:45:25PM -, elk_aide wrote:
> Hello list, how are you doing?
>
>
>
> I just installed a current OpenBSD snapshot and am having trouble using the
> Wifi.
>
> I already downloaded and installed the bwi-firmware, as that was one of the
> ones displayed on boot a
On Wed, Jul 17, 2019 at 01:15:26PM +0200, oxst...@gmx.net wrote:
> Hello,
>
> I recently installed OpenBSD 6.5 on an i386 router.
> The intallation process went fine. However, I got a black screen after
> rebooting.
>
> I tried opening a SSH session, but the computer doesn't reply.
>
> The scre
On Mon, Jul 22, 2019 at 10:58:50AM -0400, Австин Ким wrote:
> Hi,
>
> As someone completely new to OpenBSD the one immediate first impression that
> most peculiarly sticks out like a sore thumb to me is the Project’s use of
> CVS for source code management. In the class I’m taking (the one for
On Tue, Jul 23, 2019 at 12:49:56PM -0400, Matthew Graybosch wrote:
> On 7/11/19 5:57 AM, Stefan Sperling wrote:
>
> > Testing just bsd.rd is enough. If the bsd.rd environment is too limiting
> > you could also install to a USB stick and boot from it for testing purposes.
> &
On Thu, Jul 25, 2019 at 10:19:11AM +0800, Zhi-Qiang Lei wrote:
> Hi, I’m trying to encrypt a DVD-RAM before putting some files onto it on my
> OpenBSD 6.5 desktop. But neither dd nor disklabel seems able to work on the
> drive. Did I miss something?
>
> $ dmesg | grep cd
> cd0 at scsibus3 targ 1
On Fri, Jul 26, 2019 at 12:01:32PM +0200, Péter Bertalan Zoltán wrote:
> I am sorry if the answer to this question is trivial, I am rather new to
> OpenBSD and have a lot to learn.
>
> I have an 'Intel Centrino Advanced-N 6205' network card that I am trying
> to put into monitor mode on a fixed ch
On Fri, Jul 26, 2019 at 01:53:04PM +0200, Péter Bertalan Zoltán wrote:
> On 2019-07-26, Stefan Sperling wrote:
> > Internally to net80211, there are two channels: The 'default' channel
> > (referred to as "ic_ibss_chan" in source code) and the 'desired'
aks on Theo
--
Stefan Sperling
V.P., Apache Subversion
ASF member (https://www.apache.org/foundation/members.html)
PGP fingerprint: B1CF 1060 A1E9 34D1 9E86 D6D6 E5D3 0273 F59D 25F0
Kernel #262 is known to be broken.
Compile your own from -current sources or wait for the next snapshot.
On Sat, Aug 31, 2019 at 09:58:29AM +0800, Muhammad Muntaza wrote:
> 0
> C Indonesia
> P South Kalimantan
> T Banjarbaru
> Z 70724
> O Consultant
> I Muhammad Muntaza bin Hatta
> A Jalan Kawamara, Komplek Citra Pesona Mandiri Asri, Landasan Ulin
> M muham...@muntaza.id
> U https://www.muntaza.id/ope
On Mon, Sep 02, 2019 at 05:32:53PM +0300, Kihaguru Gathura wrote:
> Hi,
>
> Unable to boot with the following message
>
> open /pci@83,4000/FJSV,ulsa@2,1/disk@0,0:a/etc/random.seed: Invalid argument
> open /pci@83,4000/FJSV,ulsa@2,1/disk@0,0:a/bsd: Invalid argument
> Boot device: /pci@83,4000/F
On Tue, Sep 03, 2019 at 04:17:05PM +, Pedro Fortuny Ayuso wrote:
>
> I am having a surprising problem: my athn driver (computer is
> a 2007 MacBook Pro Core 2 duo) works flawlessly with an iphone 7
> as a wifi router (i.e. wifi tethering). The device, as per
> dmesg is:
>
> athn0 at pci3 dev
On Wed, Sep 04, 2019 at 04:55:02AM +, Pedro Fortuny Ayuso wrote:
> How can I do that? I mean, commit of what files, etc?
If all you need is a list of files in the source tree, the list is:
sys/dev/ic/athn.c
sys/dev/ic/athnvar.h
sys/dev/ic/ar5008.c
sys/dev/ic/ar5416.c
sys/dev/ic/ar5416reg.h
sy
Thanks. These bugs are up for anyone to tackle. I'm already overloaded.
On Fri, Sep 06, 2019 at 06:46:52AM -0300, fogkt...@airmail.cc wrote:
> Hi! Wanted to report some bugs with athn firmware. I know there has been
> some updates
> recently (thanks mostly to stsp@ and kevlo@), so I'm not sure wha
On Sun, Sep 08, 2019 at 08:31:55PM +, Bryan Stenson wrote:
> Hi all -
>
> I'm writing to "misc" rather than "bugs" as I'm not yet sure this is a
> bug. I'm hoping to help triage this with assistance from this list.
>
> I'm running -CURRENT and the iwn(4) driver for my wireless card. Over
>
On Mon, Sep 09, 2019 at 10:26:37AM +0100, Raf Czlonka wrote:
> Your email prompted me today to have a look at what is happening
> while the laptop loses connectivity - it's been disconnected for 3
> days after about 30 minutes of being connected (enough time to run
> 'pkg_add -u'). After putting th
On Mon, Sep 09, 2019 at 03:08:42PM -0300, soiahf...@airmail.cc wrote:
> New issue prompted today:
>
> athn0: device time out
> athn0: firmware command 0x11 timed out
> athn0: could not remove station 1 (-address-) from table
> athn0: firmware command 0x14 timed out
> athn0: firmware command 0x15 t
On Wed, Sep 11, 2019 at 12:16:06AM -0700, Bryan Stenson wrote:
> doh...I don't know why I didn't think of that...
>
> Good news, with 'ifconfig iwn0 debug' set, once the strange behavior
> starts, I see LOTS of repeated messages, the pattern happens about
> once every 4 seconds, and dumps the foll
On Wed, Sep 11, 2019 at 08:01:25AM +, Bryan Stenson wrote:
> sorry about that...here's the most recent one:
>
> Sep 11 06:31:13 e530c /bsd: iwn0: sending probe_req to
> 80:2a:a8:57:5e:17 on channel 6 mode 11n
> Sep 11 06:31:18 e530c /bsd: iwn0: RUN -> SCAN
This means it has stopped receiving
On Tue, Sep 17, 2019 at 02:21:21PM +0100, Patrick Harper wrote:
> With this setup there is a functionality issue - logging out
> through the UI causes gdm to exit to the console (although the daemon seems
> to continue running), whereas it should display the gdm greeter. Whether or
> not this is a
On Tue, Oct 01, 2019 at 10:46:50PM -0700, Sean Kamath wrote:
> Hi.
>
> I’m hoping someone either has a cluebat or some helpful suggestions beyond
> “reinstall”.
Try adding swap space.
I have added 2GB of swap space on my alix and it has been running fine ever
since.
I avoided a reinstall by re
On Sun, Oct 06, 2019 at 12:31:13PM +0200, Gregor Best wrote:
> What's the status of that on OpenBSD? Is there a driver under way or is
> this a "get comfortable with a urtwn or hack it yourself" situation?
That's the current situation, yes.
If you want to hack on it yourself, talk to me and patri
On Mon, Oct 14, 2019 at 05:55:58PM +1100, Damian McGuckin wrote:
> Because I had a working L2TP server setup on $L2TP, I was not going to
> go into its pf.conf, ipsec.conf, or anything else. But here is npppd.conf
>
> ike passive esp transport \
> proto udp from egress to any port 1701
On Sun, Oct 13, 2019 at 10:31:55PM -0300, Clark Block wrote:
> Do OpenBSD developers approve Isotop?
>
> If not, why OpenBSD developers don't approve Isotop?
>
> Reference Isotop: https://3hg.fr/Isos/isotop/
OpenBSD code is free for anyone to use for any purpose. We don't stamp
a seal of approva
On Sat, Oct 19, 2019 at 01:44:32PM +0200, Federico Giannici wrote:
> Today I switched my desktop PC, with Xfce, to OpenBSD amd64 6.6.
>
> Since the upgrade the display started to flickers. It seems to me that the
> desktop background flashes over the various windows.
>
> I vaguely remember that i
On Sat, Oct 19, 2019 at 03:18:53PM +0200, Stefan Sperling wrote:
> On Sat, Oct 19, 2019 at 01:44:32PM +0200, Federico Giannici wrote:
> > Today I switched my desktop PC, with Xfce, to OpenBSD amd64 6.6.
> >
> > Since the upgrade the display started to flickers. It seems to me
On Sat, Oct 19, 2019 at 04:17:15PM +0200, Andre Stoebe wrote:
> Hi,
>
> I ran into the same issue this morning. Disabling the compositor worked
> for me, but I noticed later that this is also documented in the package
> readme:
Thanks! Trying that now.
> Screen compositor
> =
On Sun, Nov 03, 2019 at 10:06:18AM +0100, Patrick Wildt wrote:
> Obiously I missed the attachment.
Could this tool be put into base or ports / pkg_add?
> /*
> * Copyright (c) 2013 Broadcom Corporation
> *
> * Permission to use, copy, modify, and/or distribute this software for any
> * purpose
On Sat, Nov 02, 2019 at 02:47:16PM -0700, Jordan Geoghegan wrote:
> Assuming Firefox or chromium on OpenBSD has WebRTC support (havent checked
> in a while), talky.io should work. It's a free website that supports WebRTC
> chats. I've used it in the past with great success.
The www/nextcloud port
On Wed, Nov 13, 2019 at 12:30:23PM -0700, Theo de Raadt wrote:
> These are usb devices. There are multiple usb bus drivers, with
> usb2 and usb3 variations, and the usb subsystem itself. The mailing
> lists are full of discussions of bugs in usb.
>
> But no, let's keep concluding these problems
On Sat, Nov 16, 2019 at 05:24:37PM +0800, Kevin Lo wrote:
> Despite our USB issues, there are minor problems with the urtwn(4) for
> RTL8188C/RTL8192C:
>
> - we don't need to enable/disable efuse access protection; it may prevent
> incorrect mac address read from efuse.
> - disable BB/RF is not
On Mon, Dec 16, 2019 at 10:55:17AM +0530, putridsou...@gmail.com wrote:
> Currently I'm running the -stable OPENBSD-6.6
> I want to set up the ports repository so
> I followed the faqs to set up a /usr/ports partition,
> changed the group to wsrc and file modes to 775.
> Then I added my local user
On Wed, Dec 18, 2019 at 05:05:26PM +0100, Mario Theodoridis wrote:
> Hi everyone,
>
> this may sound silly but i'm trying to install 6.6 via serial console from
> install66.fs which is described as you know:
>
> > A boot and installation image which contains
> > the base and X sets. An install o
On Thu, Dec 26, 2019 at 04:13:33PM +, goleo . wrote:
> Most of them are games, but what is Linux 4.20 kernel doing here?
sysutils/dtb
On Fri, Dec 27, 2019 at 03:56:00PM +0100, Thomas de Grivel wrote:
> Hello,
>
> I have a few ext3 drives from an old gentoo which mount fine but do
> not fsck (something about the first alternate superblock not matching
> values) they mount and fsck fine under linux.
OpenBSD ext3 support is limite
On Wed, Jan 01, 2020 at 08:54:46AM -0700, List wrote:
> Hi *,
> I am currently building a home router based upon OpenBSD.
> I therefore need some kind of WIFI Hardware. This piece of hardware
> needs to be connected over usb.
> Do you have any suggestions or recommendations ? As far as I can see
On Thu, Jan 02, 2020 at 12:56:13PM -, Stuart Henderson wrote:
> On 2020-01-01, List wrote:
> > Hi *,
> > I am currently building a home router based upon OpenBSD.
> > I therefore need some kind of WIFI Hardware. This piece of hardware
> > needs to be connected over usb.
> > Do you have any
On Sun, Jan 05, 2020 at 12:33:58AM +, go...@disroot.org wrote:
> January 5, 2020 2:24 AM, "Roderick" wrote:
>
> > On Sun, 5 Jan 2020, go...@disroot.org wrote:
> >
> >> so I don't understand what's wrong with FreeBSD and OpenBSD.
> >
> > I do not see a problem in CVS.
>
> Sure, but I starte
On Mon, Jan 06, 2020 at 06:28:48PM +, go...@disroot.org wrote:
> done reading that entire document, however, this is a topic about
> OpenBSD choosing Git over Fossil, but the actual problem is
> reimplementing Git (Game of Trees is a Git implementation just
> like OpenGit) and that's ridiculous
On Tue, Jan 07, 2020 at 12:26:49PM +, Roderick wrote:
>
> On Mon, 6 Jan 2020, Sean Kamath wrote:
>
> > Having said that, I use whatever repo projects provide. I’m not here to
> > say VCS “A” is better than VCS “B”, just saying installing various
> > VCS’s under OpenBSD is pretty damn simp
On Thu, Jan 09, 2020 at 11:02:17AM +0300, Consus wrote:
> On 18:15 Wed 08 Jan, Xiyue Deng wrote:
> > It would be better to point out where to start, what hard problems to
> > solve, what work has been done in this area that people can continue
> > to work on.
>
> They don't remember as there is no
On Thu, Jan 09, 2020 at 12:47:31PM +0300, Consus wrote:
> Relax, it was a joke.
Whatever, what I wrote wasn't just directed at you.
misc@ sucks a lot lately.
On Fri, Jan 10, 2020 at 12:52:44PM +0300, Consus wrote:
> On 20:06 Thu 09 Jan, Marc Espie wrote:
> > It's been that way for ages. But no-one volunteered
> > to work on this.
>
> Anyone even knows about this? Aside from OpenBSD developers (who have
> their plates full already) how an average person
On Mon, Jan 13, 2020 at 05:37:55PM -0700, Raymond, David wrote:
> Quick question: Can got (Game of Trees) be used on an existing git
> repository or does it require a fresh start?
>
> Dave
Commands which only display repository data work out of the box on
any Git repository. This includes 'got lo
On Tue, Jan 28, 2020 at 03:33:00PM -0800, Alexander Merritt wrote:
> On 2017-04-12 Stefan Sperling wrote
> > ath10k devices are not supported. They need a new driver because Atheros
> > has changed the driver<->hardware interface with this generation of devices.
>
> I
On Fri, Feb 14, 2020 at 10:01:06PM +0900, rgc wrote:
> every boot OpenBSD relinks the kernel ... i stared at the top display and
> saw ld on top with around 170Mb ... literally out of memory ... and out of
> swap space. on machines with small memory swap is configured by disklabel
> as 2x physmem.
On Sat, Feb 15, 2020 at 01:54:56AM +0100, Noth wrote:
> The only thing I can recommend is to stick to an older version of the OS
I wouldn't recommend running old releases, at least not until i386
officially becomes an unsupported platform.
On Mon, Feb 17, 2020 at 06:47:49PM +0100, Claus Assmann wrote:
> I got a
> HP DeskJet 2630
> printer and connected it via usb
> I tried to use it "directly", i.e., /etc/printcap:
> usb:lp=/dev/ulpt0:sd=/var/spool/output/usb:sf:sh:tr=^D:
> as mentioned in the original mail
>
> but this results in
You should be reporting these to coreboot, not here.
On Wed, Feb 19, 2020 at 02:34:40PM +0100, Thomas Meulendijks wrote:
> Hi OpenBSD Mailing list,
>
> I am trying to install Openbsd via the install66.fs on a Thinkpad X220
> [amd64] with coreboot.
> I have the problem that it does not recognize
On Fri, Feb 21, 2020 at 07:40:23PM -0700, Raymond, David wrote:
> Thanks, I will give that a try.
Also 'ifconfig nwid' still works and will override any join commands.
Details are in the ifconfig man page. This page has received improvements
in -current recently. If you don't run a -current syste
On Sun, Sep 27, 2015 at 02:53:06PM +0530, Abu Unaysah wrote:
> Peace,
>
> A Huawei 3G modem works when plugged into one out of three USB connectors
> on a ThinkPad E431 and exhibits strange behaviour on the other two:
>
> OpenBSD 5.7-stable (GENERIC.MP) #0: Mon Aug 31 07:11:03 IST 2015
> root
On Fri, Oct 02, 2015 at 08:27:55AM +0200, Peter J. Philipp wrote:
> I downloaded the jumbo patches from
> ftp://ftp.eu.openbsd.org/pub/OpenBSD/patches/5.7.tar.gz which includes
> the latest opensmtpd patch, only it doesn't check out against signify.
>
> # signify -Vep /etc/signify/openbsd-57-base
On Fri, Oct 02, 2015 at 03:14:08AM -0400, Clint Sand wrote:
> On Fri, Oct 02, 2015 at 08:41:31AM +0200, Stefan Sperling wrote:
> > Apparently, there was a mishap during signing. Use the fixed version at
> > http://ftp.openbsd.org/pub/OpenBSD/patches/5.7/common/017_smtpd.patch.sig
On Sun, Oct 04, 2015 at 08:41:23PM +0200, ludovic coues wrote:
> 2015-10-04 4:49 GMT+02:00 Danny Nguyen :
> > Hi,
> >
> > I'm running Openbsd 5.7 on several servers and would like to create an
> > array of usb sticks by daisy chaining sabrent usb hubs together (model:
> > HB-U14P). Is this compatib
On Tue, Oct 06, 2015 at 07:17:19PM +0800, Mikael wrote:
> You
>
> 1) Fill your keydisk with zeroes and
>
> 2) Apply "bioctl -k" on it.
>
> Does this mean your key is now zeroes, meaning completely unsafe, or did
> bioctl make a key for you?
>
>
> The keydisk gets some "OPENBSDSR KEYDISK005" he
On Tue, Oct 06, 2015 at 07:32:45PM +0800, Mikael wrote:
> 2015-10-06 19:27 GMT+08:00 Stefan Sperling :
> > Perhaps this will answer your questions:
> > http://www.openbsd.org/papers/eurobsdcon2015-softraid-boot.pdf
> >
>
> That one mentions nothing of what the key
On Tue, Oct 06, 2015 at 08:04:01PM +0800, Mikael wrote:
> Aha. So at "-k" time, if there's no key on the keydisk structure already,
> it'll make one. So this is how you can use one and the same keydisk for
> multiple volumes.
Yes. Per volume you need one disklabel partition of type RAID
which you
On Thu, Oct 15, 2015 at 06:19:12PM +0200, Paolo Aglialoro wrote:
> 2. What is the correct filesystem type to put in fstab for all the entries
> of point 1. in order to store them in ramdisk?
I'm using a line such as:
swap /var/log mfs rw,nodev,nosuid,-s40M,-P/var/log.tmpl 0 0
to put /var/log int
On Tue, Nov 03, 2015 at 10:14:08AM -0800, Bryan Vyhmeister wrote:
> Should a softraid(4) crypto root also work fine with EFI boot?
Yes. It should work just the same way as with MBR boot.
On Wed, Nov 04, 2015 at 01:53:33PM +0530, Jay Patel wrote:
> "Attansic Technology AR8172" rev 0x10 at pci1 dev 0 function 0 not configured
That's your ethernet device. The 'not configured' message means
there is no driver support in OpenBSD for this device yet.
It looks like Linux has a driver fo
On Thu, Nov 05, 2015 at 10:13:48AM -0800, Philip Guenther wrote:
> I'll throw a quick thumbs-up for adding FETCH_PACKAGES=yes to your
> mk.conf to have the ports infrastructure automatically install
> dependencies instead of building them.
AFAIK FETCH_PACKAGES=yes is a bit broken because quirks pa
On Sat, Nov 07, 2015 at 04:48:28PM -0700, bluesun08 wrote:
> ok. sorry.
>
> the real problem:
> i have a windows application which needs a postgresql-database with
> "de_DE.UTF-8" collation.
>
> When i try to create such a database in openbsd i get the error:
> initdb: invalid locale name "de_DE
On Sat, Nov 07, 2015 at 07:57:05PM -0500, Jonathan Thornburg wrote:
> At this point the machine can boot and run sd1[aeg] fine. *But* if I
> enter "boot sr1d:/bsd" at the "boot>" prompt, the machine boots sd1[aeg],
> not the desired sd1[dfh]. In other words, at this point my "backup"
> sd1[dfh] p
On Sun, Nov 08, 2015 at 04:03:05AM -0700, bluesun08 wrote:
> But when i type "locale -a" i get:
> ...
> de_AT.ISO8859-1
> de_AT.ISO8859-15
> de_AT.UTF-8
> de_CH.ISO8859-1
> de_CH.ISO8859-15
> de_CH.UTF-8
> de_DE.ISO8859-1
> de_DE.ISO8859-15
> de_DE.UTF-8
> el_GR.ISO8859-7
> el_GR.UTF-8
> ...
>
>
On Sun, Nov 08, 2015 at 06:29:22AM -0700, bluesun08 wrote:
> "OpenBSD doesn't provide LC_COLLATE locales. " ?
>
> We are in 2015 and i thought OpenBSD is a up-to-date server operating
> system.
> So OpenBSD is not recommended for practical use or a postgresql database
> server.
> No wonder th
On Tue, Nov 10, 2015 at 08:28:24AM +0100, Maurice Janssen wrote:
> Paco Willers schreef op 2015-11-10 07:53:
> >Hi,
> >
> >
> >When using a PS/2 mouse everything worked fine. I swapped it for a USB
> >mouse, but this mouse isn't always detected while booting my (386-based)
> >OpenBSD 5.8-stable sys
On Wed, Nov 11, 2015 at 08:58:37AM -0500, szs wrote:
> $dmesg | grep Atheros
> athn0 at pci1 dev 0 function 0 "Atheros AR9287" rev 0x01: apic 6 int 4
> vendor "Atheros", unknown product 0xff1c (class network subclass ethernet,
> rev 0
> x01) at pci1 dev 0 function 0 not configured
>
> -=-=-=-=-=-
On Thu, Nov 12, 2015 at 12:53:06PM -0500, Donald Allen wrote:
> fdisk and disklabel output below.
>
> I should note that the panic is reproducible. I rebooted the problem
> system and tried plugging and unplugging the USB drive and it panicked
> again. The HP laptop, running the 5.8 install cd sys
Please take your discussion off this mailing list.
On Sun, Nov 15, 2015 at 12:22:09AM +0100, Stefan Wollny wrote:
> What is the problem? I have downloaded the 'install58.iso'-file
> (amd64-current) and burned the disk to start from. dmesg recognizes the
> three media and reports them as 'sd0' (=m.2-SSD), 'sd1' (SATA-SSD) and 'sd2'
> (USB-stick). I
On Mon, Nov 16, 2015 at 03:18:37PM +0100, Chris Mailer wrote:
> Hello,
>
> Im using an old Evo N600c laptop with rtw0 pcmcia cardbus lancard.
> Utilizing the lancard (e.g. through netstart) while playing sound as
> well as playing sound while beeing online leads to an immediate system
> freeze.
>
On Wed, Nov 18, 2015 at 04:44:39PM +0100, Jan Stary wrote:
> This is current/amd64.
> With the recent addition of UTF to tmux,
> I apparently need to change something to be able
> to read my latin2 email etc as I did before.
IMO, since you're running -current, switch your locale to UTF-8 and
don't
On Fri, Nov 27, 2015 at 03:05:07PM +0100, Carsten Kunze wrote:
> Hello,
>
> installing a todays amd64 snapshot with image install58.fs ends with
> "installboot: No blocks to load". What can be the problem?
>
> Carsten
>
Carsten, a dmesg please, *every time* you report an issue.
We need to know
On Fri, Nov 27, 2015 at 09:22:53PM +0100, Carsten Kunze wrote:
> Only install58.fs itself did boot so there is only the dmesg if the standard
> installer image. That doesn't use softraid.
>
> As suggested I wait for the next snapshot. If the issue with installboot is
> still there I'll send a dm
On Sat, Nov 28, 2015 at 03:59:08AM -0700, bluesun08 wrote:
> Hi again,
>
> here are more error-messages:
>
> Nov 28 20:34:23 openbsd /bsd: athn0 detached
> Nov 28 20:34:25 openbsd /bsd: athn0 at uhub0
> Nov 28 20:34:25 openbsd /bsd: port 1 configuration 1 interface 0 "ATHEROS
> USB2.0 WLAN" rev
On Sat, Nov 28, 2015 at 07:35:00AM -0700, bluesun08 wrote:
> xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0c: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> uhub2 at uhub0 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 3
> a
On Sun, Nov 29, 2015 at 02:52:15PM +0100, Adam Wolk wrote:
> Now to be precise. I can use this dongle quite fine. It sometimes goes
> up to 1 hour of usage without any timeouts. When it does timeout it's
> usually in rapid succession (like 2-3 times in next 10 minutes). Each
> time after a timeout
101 - 200 of 945 matches
Mail list logo
