Hi,
I have a Supermicro A1SRM-LN7F/LN5F, which has a lot of the same hardware as
the board you are interested in.
For IPMI I did a:
config -e -o bsd.new /bsd
enable ipmi
I run vmd (virtual machines) without problems.
Doing 6 port (+1 port for admin) routing+pf+nat, mail server, sip server,
htt
Hi all,
I am buliding an Internet-facing firewall plus router on the bare metal
of a small and quiet machine at home. I am investigating OpenBSD+pf and
NetBSD+npf, and will choose either one depending on many factors.
I considered pfSense, but I would rather use a plain operating system
and keep
> That was early on, but you should probably see NXE in the dmesg of all
> intel cpus these days.
>
> [...]
>
> I'm not certain I have tried exactly Pro 1000 PT Dual, but all intel gig
> dual cards
> I did try worked like a charm. I assume the quads work out nicely too.
The card arrived today a
2016-02-02 7:03 GMT+01:00 Gabriele Tozzi :
> Now, back to the topic, I kindly have two questions, to avoid mistakes
> of the past:
>
> 1. The CPU is and Intel Atom D425.
>The OpenBSD manual says that "Some Intel processors lack support
>for important PAE NX bit. But I couldn't find a list
I really wanted to install OpenBSD so, this morning I went back to the
shop and the kind guy accepted to replace the bugged motherboard with a
different one for a reasonable extra. This one is an overkill for my
needs (it has a 1.8Ghz 64bit atom CPU!!!), but good news: I've finally
managed to insta
On Sat, Aug 29, 2009 at 12:56 PM, Benjamin GUERIN wrote:
> No, I didn't receive any response from the list and I have given up this
> project for now.So I still don't know if OpenBSD works on it.
>
> Benjamin.
>
Thanks for the reply!
>From what I can tell:
- the NIC (RTL8111C) is supported by
On Fri, May 29, 2009 at 8:27 AM, Benjamin G. wrote:
> Hello list,
>
> I would like to buy a motherboard based on Via Nano and
> VX 800 chipset. Before buying this motherboard I would like
> to be sure that OpenBSD works well on it.
>
> This is the motherboard Jetway JNF76 VIA NANO 1GHz
> and here
: VIA VX800 Chipsets
Graphics: VIA Chrome9 HC3 IGP
Power Management: ACPI S3/S4 Compliant
Audio: VIA VT1708B
Ethernet LAN: RTL8111C
Note : this for home use, so performance is not a priority
I Havn't find compatibility informations on this chipset on
google and on the official har
Edd Barrett wrote:
On 5/3/07, Edd Barrett <[EMAIL PROTECTED]> wrote:
Hi Shane,
Superb! I dont mind putting another NIC in, but I would hope that this
is resolved in newer models.
Oh, the other thing was, these usually ship with ATI/Nvidea graphics
cards. I couldnt care less for 3d accelleratio
On 5/3/07, Edd Barrett <[EMAIL PROTECTED]> wrote:
Hi Shane,
Superb! I dont mind putting another NIC in, but I would hope that this
is resolved in newer models.
Oh, the other thing was, these usually ship with ATI/Nvidea graphics
cards. I couldnt care less for 3d accelleration, as long as I can
Hi Shane,
On 5/3/07, Shane Harbour <[EMAIL PROTECTED]> wrote:
I'm running -current on one of the older Ultra 20's and it works well
for me. It's been a while since I've actually sat down and played with
it, but most stuff is supported out of the box. I did have to put a
different NIC in mine t
I'm running -current on one of the older Ultra 20's and it works well
for me. It's been a while since I've actually sat down and played with
it, but most stuff is supported out of the box. I did have to put a
different NIC in mine though. The built in nfe kept locking up during
long transfer
Hi there,
I am starting to think that it is time for a new workstation. The Sun
ultra 20 (which is an amd64 machine), looks nice, but is it supported?
Is anyone using this configuration with OpenBSD?
http://www.sun.com/desktop/workstation/ultra20/index.xml
If you don't think that this is a wise
Hi all,
I am buying a set of DELL servers (PE850) using the Pentium D 820 800FSB
DualCore.
1) I would like to konw if this hardware (DELL PE850, and more accurately with
this processor)
is fully supported by OpenBSD (else i will choose other servers).
2) I have heard aboud problem in the
14 matches
Mail list logo