# grep ppp /var/log/*
.Failed to open /dev/cuaU2: device not configured..
I did exactly as you asked, but everything is the same.
Is it possible that the USB modem doesn't like the Lenovo USB port?
If you don't have any further suggestions, I would like to install OpenBSD on
my PC and try the connection.
I don't like to do that because this means that I have to remove Wi
#dmesg | grep -B 1 ucom
same as your example but different port and different addr.
#ls -l /dev/cuaU*crw-rw 1 uucp dialer 66, 128 Feb 24 9:46
/dev/cuaU0crw-rw 1 uucp dialer 66, 129 Feb 24 9:46 /dev/cuaU1crw-rw 1
uucp dialer 66, 130 Feb 24 9:46 /dev/cuaU2crw-rw 1 uucp dialer 66, 131
# cat /etc/ppp/peers/mobinil
/dev/cuaU0debugcrtscts921600defaultroutenoauth:10.64.64.64connect
'/usr/sbin/chat -v -f /etc/ppp/peers/mobinil.chat'
# cat /etc/ppp/peers/mobinil.chat
ABORT "NO CARRIER"ABORT "NO DIALTONE"ABORT "ERROR"ABORT "NO ANSWER"ABORT
"BUSY"ABORT "Username/Password Incorrect"TIMEO
I checked for "/etc/resolv.conf" and couldn't find it. So I re-installed
OpenBSD to let the installer create it.
Here is the contents of this file:
#cat /etc/resolv.conflookup file bindnameserver ipnameserver addressnameserver
list
I can create a ppp0 interface through the following command:
#ifcon
1. While the machine is turned off.2. I inserted the USB modem in the USB 2.0
port.3. I turned the machine on.4. #dmesg
umsm0 at uhub0 port 2 configuration 1 interface 0 "HUAWEI HUAWEI Mobile" rev
2.00/1.02 addr 2umsm1 at uhub0 port 2 configuration 1 interface 1 "HUAWEI
Technologies HUAWEI Mobile E
The following is what I got from making a "modem query" under windows:
ATQ0V1E0 - OKAT+GMM - E173AT+FCLASS=? - COMMAND NOT SUPPORTAT#CLS=? - COMMAND
NOT SUPPORTEDAT+GCI? - COMMAND NOT SUPPORTAT+GCI=? - COMMAND NOT SUPPORTATI1 -
Manufacturer: huawei Model: E173 Revision: 21.157.71.00.272
on, 23 Feb 2015 10:40:36 +0100
> Subject: Re: ppp not found
> To: afyous...@hotmail.com
> CC: misc@openbsd.org
>
> On Mon, Feb 23, 2015 at 9:56 AM, A Y wrote:
> > Hi all,
> > I installed OpenBSD -current and tried to run "ppp" command, but I got
this
> >
Hi all,
I installed OpenBSD -current and tried to run "ppp" command, but I got this
error:
ksh: ppp: not found
I also didn't find "/etc/ppp/ppp.conf.sample"
Was there something, in the installation, that I should have done?
I am trying to connect to the internet using a USB modem.
Thank you
e: Sat, 21 Feb 2015 10:00:10 +
>
> On 2015-02-21, A Y wrote:
> > Do you mean typing "dmesg" from the $ prompt and post what I get?
>
> Yes, exactly.
>
> > I need to add that I could install OpenBSD 5.7 from both USB 3.0 and USB
2.0
> > port. So, OpenBSD 5.7
rom: s...@spacehopper.org
> Subject: Re: Installing OpenBSD 5.6 using a USB Flash drive
> Date: Thu, 19 Feb 2015 12:46:02 +
>
> On 2015-02-19, Raimo Niskanen wrote:
> > On Wed, Feb 18, 2015 at 05:30:29PM +0100, Alexander Hall wrote:
> >> On February 18, 2015 11:43:56 AM
ows, that restores the full
> > capacity.
> >
> >
>
http://download.cnet.com/HP-USB-Disk-Storage-Format-Tool/3000-2094_4-10974082
> .html
> >
> > Jan
> >
> >
> >
> > On Wed, Feb 18, 2015 at 09:37:31AM +, A Y wrote:
> > > I use
5.6 using a USB Flash drive
>
> Am 2015-02-17 17:27, schrieb A Y:
> > dmesg|grep ^.d0 returns only "sd0"
> > sysctl hw.disknames returns "sd0" and "rd0"
> >
> > my machine is a 10.1 inch netbook Lenovo E10-30 running Intel Celeron
> >
ndows, that restores the full
> capacity.
>
>
http://download.cnet.com/HP-USB-Disk-Storage-Format-Tool/3000-2094_4-10974082
.html
>
> Jan
>
>
>
> On Wed, Feb 18, 2015 at 09:37:31AM +, A Y wrote:
> > I used the following command under OpenBSD 5.6:
> >
> >
I used the following command under OpenBSD 5.6:
#dd if=/location/install56.fs of=/dev/rsd1c bs=1m
When I try to reformat it under Windows, it formats only 240 M. So is it
possible to format is under OpenBSD so that I can get the full size (16G)
back?
> Date: Wed, 18 Feb 2015 11:17:31 +0200
> Sub
I used the "dd'' command to make a bootable USB drive. The USB is 16G. After I
am done with the installation, I want to use the USB under Windows for other
purposes. Windows reads only 240 M.
How can I recover the 16G on the USB?
; To: misc@openbsd.org
> > Subject: Re: Installing OpenBSD 5.6 using a USB Flash drive
> >
> > On Tue, Feb 17, 2015 at 12:51:41PM +0100, Raimo Niskanen wrote:
> > > On Tue, Feb 17, 2015 at 10:36:20AM +, A Y wrote:
> > > > Hi all,
> > > > I used t
e: Tue, 17 Feb 2015 16:14:42 +0100
> From: raimo+open...@erix.ericsson.se
> To: misc@openbsd.org
> Subject: Re: Installing OpenBSD 5.6 using a USB Flash drive
>
> On Tue, Feb 17, 2015 at 12:51:41PM +0100, Raimo Niskanen wrote:
> > On Tue, Feb 17, 2015 at 10:36:20AM +, A
about
networking, not even the basic knowledge.
Do you think that OpenBSD 5.7 will work?
> Date: Tue, 17 Feb 2015 11:47:30 -0500
> From: j...@jggimi.homeip.net
> To: afyous...@hotmail.com
> Subject: Re: Installing OpenBSD 5.6 using a USB Flash drive
>
> Hi there, A Y.
>
> On 201
2015 12:51:41 +0100
> From: raimo+open...@erix.ericsson.se
> To: misc@openbsd.org
> Subject: Re: Installing OpenBSD 5.6 using a USB Flash drive
>
> On Tue, Feb 17, 2015 at 10:36:20AM +, A Y wrote:
> > Hi all,
> > I used the following command to create a USB flash drive in
Hi all,
I used the following command to create a USB flash drive installation media
(with all file sets included):
# dd if=/location/install56.fs of=/dev/rsd0c bs=1m
The USB flash drive was created successfully.
The boot process from the USB was done. However, when we came to installing
file sets,
rks.
>
> > To: afyous...@hotmail.com
> > Subject: Re: Installing OpenBSD 5.6 using a USB Flash drive
> > From: pe...@bsdly.net
> > Date: Sat, 14 Feb 2015 20:15:04 +0100
> >
> > A Y writes:
> >
> > > I only click on the 'reply' tab, in outlook.
Ok, I did.
Please let me know if it works.
> To: afyous...@hotmail.com
> Subject: Re: Installing OpenBSD 5.6 using a USB Flash drive
> From: pe...@bsdly.net
> Date: Sat, 14 Feb 2015 20:15:04 +0100
>
> A Y writes:
>
> > I only click on the 'reply' tab, in
Hi all,
I used the following command to create a USB flash drive installation media
(with all file sets included):
# dd if=/location/install56.fs of=/dev/rsd0c bs=1m
The USB flash drive was created successfully.
The boot process from the USB was done. However, when we came to installing
file se
thanks ..
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
- Original Message
From: Paul de Weerd <[EMAIL PROTECTED]>
To: S t i n g r a y <[EMAIL PROTECTED]>
Cc: openbsd
Sent: Friday, January 26, 2007 11:58:55 AM
Subject: Re: finding out physical memory siz
*$ Stingray *:$., 88,.$:*((*$
- Original Message
From: Marcos Laufer <[EMAIL PROTECTED]>
To: S t i n g r a y <[EMAIL PROTECTED]>
Cc: misc@openbsd.org
Sent: Friday, January 26, 2007 8:57:04 AM
Subject: Re: multiple external links working .. (Solved)
Would yo
How can i find out the size of physical memory after boot, my system
has 512MB ram & this is what dmesg shows , but top commands reviles
otherwise
load averages: 0.26, 0.35, 0.30 21:15:47
49 processes: 48 idle, 1 on processor
CPU states: 2.0% user, 0.0% n
3rd internet connection join this ? :)
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
- Original Message
From: <[EMAIL PROTECTED]>
To: S t i n g r a y <[EMAIL PROTECTED]>
Cc: openbsd
Sent: Wednesday, January 24, 2007 12:53:40 AM
Subject: Re: multiple external
Well thanks to everyone who help me coming close to using multiple external
links for internet.
but its still not working, my scenario is that i have 2 ISP's connection now
the main internet connection is the powerful one which i only want to use for
specific protocols which i have defined
Can anyone guide me in updating my 4.0 version to current ?
i have installed CVS source from my CD, but which running any cvs command i get
this error ..
what should i do ?
# cvs checkout -P src
cvs checkout: No CVSROOT specified! Please use the `-d' option
cvs [checkout aborted]: or set the C
ext_if2 to any
pass out on $ext_if2 route-to ($ext_if1 $ext_gw1) from $ext_if1 to any
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
- Original Message
From: Stuart Henderson <[EMAIL PROTECTED]>
To: S t i n g r a y <[EMAIL PROTECTED]>
Cc: openbsd
Sent: Monday, January 8, 2007 4:52:11
ts from any IPs on $ext_if1 to $ext_gw1
and the same for
# $ext_if2 and $ext_gw2
pass out on $ext_if1 route-to ($ext_if2 $ext_gw2) from
$ext_if2 to any
pass out on $ext_if2 route-to ($ext_if1 $ext_gw1) from
$ext_if1 to any
--- Stuart Henderson <[EMAIL PROTECTED]> wrote:
> On 2007/01/0
Well few days ago i mailed a problem of mine which was
that i have purchased multiple internet connections &
now would like to divide spcific protocoles between
them , now i tried searching the internet for this,
but couldent find anything encouraging .. most of the
people out there are confused a
Well i have purchased another Internal Connection to provide my client computer
more speed to specific protocols & also its cheaper this way :)
Now i want to use my previous internet link "DSL" to provide only access to
specific protocols like Http, Https Dns etc etc. and use this one for all
p
sorry for bothering you guys again. but something seems wrong .
i have a 640Kbps internet connection & as you can see i have limit Http traffic
to 188Kb upperlimit
altq on $extif hfsc bandwidth 640Kb queue {others www msn https smtp}
queue others bandwidth 128Kb hfsc( default realtime(128Kb 1000
many doubts.
curreltly using CBQ technique.
trying to learn HPSC
hope you understand , will try not to post as much in the future.
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
- Original Message
From: Kian Mohageri <[EMAIL PROTECTED]>
To: S t i n g r a y <[EMAIL
i am currently running OpenBSD server on a 933MHZ 512MB RAM with PF + squid +
squidguard + ALTQ
with users upto 200 + with easy, one of the primary reasons i switch to OpebBSD
from windows.
such great resourse managment :)
regards
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
,.$:*((*$
- Original Message
From: Jon Simola <[EMAIL PROTECTED]>
To: S t i n g r a y <[EMAIL PROTECTED]>
Cc: Open BSD
Sent: Friday, October 13, 2006 12:17:12 AM
Subject: Re: problems using HFSC with pf
On 10/12/06, S t i n g r a y <[EMAIL PROTECTED]> wrote:
> i am facing pro
i am facing problems using hfsc with PF.
pfctl -f /etc/pf.conf
pfctl: the sum of the child bandwidth higher than parent "root_fxp0"
pfctl: linkshare sc exceeds parent's sc
/etc/pf.conf:21: errors in queue definition
pfctl: Syntax error in config file: pf rules not loaded
althoug my pf.conf looks
Is it symmetric or asymmetric?
Joe
On 10/6/06, Andreas Bihlmaier <[EMAIL PROTECTED]> wrote:
>
> On Fri, Oct 06, 2006 at 09:57:16AM -0700, S t i n g r a y wrote:
> > my internet bandwith is getting slower & slower i have doubts about my
> traffic shaping .
> > how to find
my internet bandwith is getting slower & slower i have doubts about my traffic
shaping .
how to find out whats wrong ? & which clients is doing what with my bandwith .
also have a look at my traffic shaping is it ok ?
intif="epic0"
intnet="10.0.0.0/16"
extif="fxp0"
extad="192.168.0.2"
intad="10.
I have a firewall running on a 512k external link .. everything is running fine
..
now i want to add another 512k external link to the same machine. for some
reasons i cannot upgrade my link,
Will i run into problems doing 2 external link in i machine ?
how should i configure my pf ? any hints ?
Sorry for reposting but as no one answered , & i need to confirm urgent.
here is my first traffic shaping pf.conf file .. although there werent any
syntax mistakes but can you have a look to it & see if there is any logical
mistake ?
would be very greatfull
regards
intif="epic0"
intnet="10.0
here is my first traffic shaping pf.conf file .. although there werent any
syntax mistakes but can you have a look to it & see if there is any logical
mistake ?
would be very greatfull
regards
intif="epic0"
intnet="10.0.0.0/16"
extif="fxp0"
extad="192.168.0.2/32"
chadd="10.0.0.1/32"
servers=
Can you please take a look at my pf.conf ?
is there anything wrong with it ? everything seem to work fine, how about
traffic shaping ? how can i chack it ?
intif="epic0"
intnet="10.0.0.0/16"
extif="fxp0"
extad="192.168.0.2/32"
chadd="10.0.0.1/32"
servers="10.0.0.2, 10.0.0.3, 10.0.0.4, 10.0.0.5,
can you please help me out here ..
below is my pf.conf file which allow all ourbound traffice , now i want it to
only allow specific protocols like only http,https,ftp,.
need a hint.
intif="epic0"
intad="10.0.0.0/16"
extif="fxp0"
extad="192.168.0.6/32"
chadd="10.0.0.1/32"
allif="{$extif, in
Here is my pf.conf setrup basic traffic shapping for the first time ..
now my question how does pf inderstand what smtp or www protocole is ? how can
i include custom protocoles ? like yahoo messenger, 5001 or msn messenger 1863 ?
regards
ext_if="fxp0"
int_if="epic0"
extad="192.168.0.6"
alt
I am configuring altq & pf for the first time , & have a few problems here ..
well i need to traffic shape between diffrent protocols as you can see in my
pf.conf
now i am stuck & confused what to do next as i have built this file with
diffrent ref from web.
the im is the most common Instant m
ver on openbsd
On Mon, Jun 26, 2006 at 11:47:59AM -0700, S t i n g r a y wrote:
> Hello there , i cannot seem to configure a basic dns server it seem its not
> resolving local domain names although i have
>
> setup everything as told in the docs, please have a look.
>
>
> reso
Hello there , i cannot seem to configure a basic dns server it seem its not
resolving local domain names although i have
setup everything as told in the docs, please have a look.
resolve.conf
bash-3.1# cat /etc/resolv.conf
nameserver 127.0.0.1
search clickonline.net
named.conf
bash-3.1#
My Yahoo Messenger on Clients isnt working .. please have a look at my rules &
tell whats wrong ?
regards
intif="epic0"
intad="10.0.0.0/16"
extif="fxp0"
extad="192.168.0.6/32"
chadd="10.0.0.6/32"
dmzser="10.0.0.1/32"
allif="{$extif, intif}"
table persist file "/etc/allowedclients"
table persi
Can i some how block FastTrack traffic with pf ? so in
other words i want to block all the major p2p
softwares out there effeciently .. rather then
blocking each individually .
regards
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
Tired of spam? Yahoo! Mail has the best spam protection around
h
Is it possible to combine 2 external interface into
one in openBsD ?
actually its cheaper for me to buy two smaller
internet connection then a big one.
so i was thinking ...
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.y
Well i want to configure spamd to stop spam, but the
mail server is in my DMZ & its a non openbsd system,
so i was thinking will spamd work ? as i have an
openbsd firewall which is "rdr" redirecting traffic to
the internal mail server ?
i hope you understood what i ment ?
regards
*:$., 88,.$:
Planck, can you shed some more light here ? or maybe
provide me a link with examples ?
regards
Faisal
--- Planck <[EMAIL PROTECTED]> wrote:
> S t i n g r a y napisaE(a):
> > I want to do traffic shaping as per protocol basis
> so
> > if i give a certian bandwith to
I want to do traffic shaping as per protocol basis so
if i give a certian bandwith to HTTP protocole , isnt
there any way i can diffrenciate between HTTP webpages
& HTTP downloads of huge .iso files ?
i dont want users who are downloading huge files
effect userrs who are only checking their webmail
No this book is only about openbsd PF no types of
networks
--- Peter Blair <[EMAIL PROTECTED]> wrote:
> Does the section of the book talk about frame relay?
> More context would help.
>
> On 5/15/06, S t i n g r a y <[EMAIL PROTECTED]>
> wrote:
> > Well i a
Well i needed to limit internal users access to my
server & deny any ip changes by them so what i want
to do is load a static arp permenant MAC address of
the client compters @ startup, the file has a
combination of ip address & MAC address , anyone not
having the exact pair wont communicate.
this
Well i am learning OpenBSD PF from a book & in the
book when creating sample rules the author refers to
CIR's when defining Macros but in the form of
prv_ad = "p.p.p.p/24"
ch_ad = "w.w.w.w/32"
prv_ad1 = "p.p.1.p/24"
prv_ad2 = "p..p.2.p/24"
ext_ad2 = "e.e.e.f/32"
there isnt any explanation of the
Well when i try to login from remote host via ssh it
takes ages to login for the first time,
also when i issue other networking commands such as
$ arp -a
it takes almost 1 minute to start displaying records.
how can i find whats wrong ?
regards
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
Ok i know PF dont filter using MAC address but can you
point me to package that has the feature of Anti MAC
Spoofing ?
regards
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
i have a network script that i want to execute before
any host on the network connects to my computer.
thanks
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
ok sorry for that , but i think you totally
misunderstood my question, i wanted to know the
procedure i can use to allow a list of internal mac
addresses to access my NAT server to access internet.
all other mac's should be disallowed.
simple :)
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
Tir
Hello there
i am looking for a solution that lets me have some
sort of allow mac address & ipaddress that will be
able to access my server or servers & use what ever
service they are offering.
& as i am using a network in which i dont have control
over users PC & cannot use service authentication
Where can i find detail infomation about pf ?
doumentation?
regards
--- Joachim Schipper <[EMAIL PROTECTED]> wrote:
> On Sun, Apr 30, 2006 at 01:44:18AM -0700, S t i n g
> r a y wrote:
> > I want to use OpenBSD as the network firewall of
> my
> > network.
> >
Now what i want to know , maybe is O T in this list
but what is the diffrence , i mean pf in openBSD is
refered to as a firewall for home or small offices ?
why is that , i mean what is the criteria of an
enterprise firewall what is the diffrence between pf &
MS ISA / cisco pix or checkpoint ?
per
I want to use OpenBSD as the network firewall of my
network.
Now which firewall should i use ? i heard people say
pf is outdated use IP Filter instead.
what you recommend ?
regards
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
Tired of spam? Yahoo! Mail has the best spam protection around
http:
Well i just installed my First OpenBSD BOX :) feels
good !!! but to install packages i cannot find ports
collection in /usr how can i get them ? i am using 3.7
version.
regards
*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
Tired of spam? Yahoo! Mail has the best spam protection around
http://m
68 matches
Mail list logo
