Before implementing relayd for load balancing needs I wanted to get
some answers (Yes I have read relayd and relayd.conf manual and I am
able to run them successfully in a test environment). So here are some
of the questions:
1. when I choose mode as loadbalance, what algorithm is is using? I
DESENVOLVIMENTO COMERCIAL ACTIVO
As "Vendas Valores- Consultores Comerciais" i uma empresa que presta servigos
de consultoria comercial, de forma a maximizar o potjncial comercial da sua
empresa.
A Consultoria Comercial consiste numa analise sistematica do departamento
comercial da empresa de fo
Pierre,
If I'm not mistaken the vhid on all your carp interfaces are the same
value. I would suggest you use a unique value for each group.
>From the man :
The Virtual Host ID. This is a unique number that is used to identify
the redundancy group to other nodes on the network. Acceptable values
a
Siju George wrote:
I am wondering why this has increased in the near future :-(
--Siju
Obviously you and the list maintainers haven't kept up to date.
Recently Spam-Evil-3.56p0 -> Spam-Evil-3.7
They need to upgrade Spam-GoAway-4.3p2 -> Spam-GoAway-5.0
A quick little fix and all that nast
w...@xoono.net [w...@xoono.net] wrote:
> pciide0 at pci0 dev 2 function 1 "Acer Labs M5219 UDMA IDE" rev 0x20: DMA
> (unsupported), channel 0 configured to compatibility, channel 1
> configured to compatibility
> pciide0: channel 0 ignored (other hardware responding at addresses)
> pciide0: chann
Hi,
I've setup pf relayd and carp to work together as a load balancer. I
have one carp interface on the public internet on both servers :
inet 192.168.172.77 255.255.255.240 192.168.172.79 vhid 1 pass foo
inet alias 192.168.172.74 255.255.255.255
I wish to use ip aliases on the carp interface to
NS EDIFICIOS se complace en acercarle una excelente propuesta: su plan en
120 CUOTAS!!!, a travis de un sistema znico de financiacisn propia, con
mmnimo anticipo y sin requisitos formales de accesibilidad, mediante el
cual UD. Podra acceder a su departamento de 1 2 y 3 ambientes, oficina,
ambiente
Hi List !
Another Quick question...
Is there a way to define a table name in relayd.conf and use this same
table name in pf.conf ?? ( instead of dealing with __automatic_.. in
pf.conf )
Marcus
Hey List !
quick question... Is there a way to clear one specific VPN in the
ipsecctl reference table or a really need to clear the entire table ? (
ipsecctl -F )
Example... I got a bunch of VPN ( 50 + ) , need to flush the state of
this particular one:
BSD 4.3 // config in /etc/ipsec.conf
Can't read that? Custom compiled kernel and cac error speaks by
themselves; dirty solution, try other disk controller. Best solution,
discard you don't have bad hardware and, if everything is ok, make
contact with developers and help searching for a code patch to improve
the RAID adapter driver
On 2009-06-26, Michal wrote:
> Well, you can check the Volt readings in the bios, most will give you a
> reading, but I am sure there is some BSD software out there
"sysctl hw.sensors" works for some systems. also see sensorsd(8).
On Fri, Jun 26, 2009 at 09:57:51PM +0530, Siju George wrote:
> I am wondering why this has increased in the near future :-(
You seem to possess powers tha I (and I suspect many others) do not. Do you
have a crystal ball, were you struck by a meteorite, were you granted three
wishes and used one
On Fri, Jun 26, 2009 at 09:57:51PM +0530, Siju George wrote:
> I am wondering why this has increased in the near future :-(
>
> --Siju
>
Maybe you should stop sending more of it
I am wondering why this has increased in the near future :-(
--Siju
Overheating?
On 26 jun 2009, at 17.50, Michal wrote:
Well, you can check the Volt readings in the bios, most will give
you a
reading, but I am sure there is some BSD software out there, maybe
someone
in the list will know. On windows you can use Speedfan. Even if it's
not
this, it's worth
But even measuring the ripple with a scope won't guarantee it's OK.
Swapping out all of the hardware is sometimes the only way to find out.
Same goes for memtest86+: it can prove it's broken, but if it doesn't
find problems it doesn't guarantee there are none.
--
Jussi Peltola
Well, you can check the Volt readings in the bios, most will give you a
reading, but I am sure there is some BSD software out there, maybe someone
in the list will know. On windows you can use Speedfan. Even if it's not
this, it's worth knowing how to check this as a simple check on servers
-O
MAGNETOTHERAPY
After two weeks of tour around Australian lands, the Venezuelan surfer Magnum
“Magneto” Martínez is back in Carlsbad (California) to
recharge batteries. Manly Beach, Dee Why, Narrabeen, Avalon and some other
Sidney’s northern beaches were some of the points chosen by the m
On Thu, Jun 25, 2009 at 05:23:40PM +0200, Com??te wrote:
> Hi,
>
> we are using the last OpenBSD 4.5-stable release on an old Compaq
> Proliant ML350 as a firewall with spamd. But we encounter randomly some
> system crashes (once a week or two weeks). The system always displays
> the same mes
If you want to lock in a unvarying monthly income stream from your
portfolio, then it's time to overlook your investments. Thanks to the
introduction of a brand new assets, there's a whole new world of daily
income just waiting for you. Plenty of people are already using these new
ways to generate
No problem with the PSU and voltage limits. The PSU isn't used at its
full capacity and the other servers plugged on it work well.
Could it be a bad network interface ?
Michal a icrit :
Just stabbing the dark here, test your Voltage Rails on your PSU. Check they
are within limits. I find unexpl
There's also ample room for improvements in some of the algorithms cvs
currently use. It positively SUCKS at merging stuff. It can't even work with
its own keywords properly.
I no longer count the number of times I've had a *conflict* after a merge
on code I committed myself in another tree, just
Well i have tested the RAM with memtest, no error.
maybe another idea ?
Thanks
Daniel Gracia Garallar a C)crit :
Oh and maybe bad RAM; I've hit some nasty errors with these faulty
DIMMs... :/
ComC(te escribiC3:
Hi,
we are using the last OpenBSD 4.5-stable release on an old Compaq
Proliant
Hello,
CARP is configured using a script. Here it is (truncated version) :
ifconfig carp5 create
ifconfig carp5 vhid 10 advskew $1 pass $PASS 10.31.0.254/16 description "LAN"
ifconfig carp2 create
ifconfig carp2 vhid 10 advskew $1 pass $PASS 193.57.199.254/24 description
"DMZ 1"
ifconfig carp3
> Come on, it is fucking inefficient. The way it checks out *empty
> directories*
> and then garbage-collects them at the end of an update is beyond stupid.
Not that i particularly care; but isn't git incapable of checking out
empty directories?
Besides that, it is perfectly possible to use git y
On Tue, Jun 23, 2009 at 02:17:30PM +0200, Hannah Schroeter wrote:
> Hi!
>
> On Mon, Jun 22, 2009 at 10:16:12PM +0100, Anil Madhavapeddy wrote:
> >Pretty much every single new revision control system can import/export
> >from CVS, so use whatever you want...
>
> I tried git cvsimport on OpenBSD'
On Tue, Jun 23, 2009 at 07:39:41AM -0500, Marco Peereboom wrote:
> Manure alert!
>
> On Tue, Jun 23, 2009 at 02:16:39PM +0200, Hannah Schroeter wrote:
> > Hi!
> >
> > On Mon, Jun 22, 2009 at 02:11:21PM -0500, Marco Peereboom wrote:
> > >What is wrong with CVS? And no I am not talking about the h
Can you post configuration files for the carp interfaces ?
"Nonviolence means avoiding not only external physical violence but
also internal violence of spirit. You not only refuse to shoot a man,
but you refuse to hate him". Rev. Martin Luther King Jr.
On Mon, Jun 22, 2009 at 11:01 AM, BARDOU
Hi there,
are there any experiences to compile swt 3.3 under 4.5?
I need it for the jameica framework
http://willuhn.de/products/jameica/
In the ports there is just swt-3.2.2p0
TIA
Andri
Ferienunterkunft
vacation rentals worldwide
* secondcasa.com
* vacation rentals worldwide
* Reuchlinstrasse 23
* 72800 Eningen unter Achalm
* Germania
* Telefono/Telefax +49 (0)7123 2846889/2846892
* E-Mail i...@secondcasa.com
*
Greece
Gentili signore ed egregi signori,
30 matches
Mail list logo
