Re: random crashes on a firewall with OpenBSD 4.5-stable

Maxim Bourmistrov Fri, 26 Jun 2009 09:10:47 -0700

Overheating?

On 26 jun 2009, at 17.50, Michal wrote:

Well, you can check the Volt readings in the bios, most will giveyou areading, but I am sure there is some BSD software out there, maybesomeonein the list will know. On windows you can use Speedfan. Even if it'snotthis, it's worth knowing how to check this as a simple check onservers


-----Original Message-----
From: Comhte [mailto:com...@daknet.org]
Sent: 26 June 2009 16:42
To: Michal
Subject: Re: random crashes on a firewall with OpenBSD 4.5-stable

Oh sorry :p
How could i test the power supply unit ?

Michal a icrit :

Other servers?? I don't mean PDU, I mean PSU...the power supply inthe
server. If your shearing a power supply across 2 servers I would be

shocked

:)

-----Original Message-----
From: Comete [mailto:com...@daknet.org]
Sent: 26 June 2009 13:48
To: Michal
Subject: Re: random crashes on a firewall with OpenBSD 4.5-stable

No problem with the PSU and voltage limits. The PSU isn't used at its
full capacity and the other servers plugged on it work well.

Could it be a bad network interface ?

Michal a icrit :

Just stabbing the dark here, test your Voltage Rails on your PSU.Check

they

are within limits. I find unexplained crash's can be traced backto PSU's

quite often

-----Original Message-----

From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] OnBehalf Of

Comhte
Sent: 26 June 2009 12:22
To: Misc OpenBSD
Cc: Daniel Gracia Garallar
Subject: Re: random crashes on a firewall with OpenBSD 4.5-stable

Well i have tested the RAM with memtest, no error.

maybe another idea ?

Thanks

Daniel Gracia Garallar a C)crit :

Oh and maybe bad RAM; I've hit some nasty errors with these faulty
DIMMs... :/

ComC(te escribiC3:

Hi,

we are using the last OpenBSD 4.5-stable release on an old Compaq
Proliant ML350 as a firewall with spamd. But we encounter randomly
some system crashes (once a week or two weeks). The system always
displays the same message:

uvm_fault (0xd080d9e00x0,0,1) -> e

kernel: page fault trap, code=0

Stopped at cac_pci_l0_intr_pending+0xb
push 0x34 (%eax)

What do you think it could be ? I thought about maybe a hardware
problem but where exactly...

I join my dmesg below

Thanks for your advice !

OpenBSD 4.5-stable (GENERIC) #9: Sun May 17 22:59:17 CEST 2009
   r...@arwen.saintlo.fr:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel"
686-class) 1.27 GHz
cpu0:

FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,

FXSR,SSE

real mem  = 267988992 (255MB)
avail mem = 250839040 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xec000 (31 entries)
bios0: vendor Compaq version "D11" date 01/29/2002
bios0: Compaq ProLiant ML350 G2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices PBTN(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x1800
0xcb000/0x1800 0xcc800/0x4000! 0xd0800/0x1800 0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 2
em0 at pci1 dev 1 function 0 "Intel PRO/1000T (82544GC)" rev 0x02:
apic 2 int 0 (irq 5), address 00:02:b3:b9:0d:a4
em1 at pci1 dev 2 function 0 "Intel PRO/1000T (82544GC)" rev 0x02:
apic 2 int 2 (irq 15), address 00:02:b3:b9:0d:7d
re0 at pci1 dev 3 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 4 (irq 15), address

00:1c:f0:6f:38:7e

rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
cac0 at pci1 dev 4 function 0 "DEC Compaq SMART RAID 42xx" rev0x01:
apic 2 int 6 (irq 11), Smart Array 431
scsibus0 at cac0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID1 vol #00, > SCSI2 0/direct
fixed
sd0: 34727MB, 512 bytes/sec, 71122560 sec total
re1 at pci1 dev 5 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 8 (irq 15), address

00:1c:f0:62:eb:12

rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 3

fxp0 at pci0 dev 1 function 0 "Intel 8255x" rev 0x08, i82559:apic 2

int 10 (irq 5), address 00:02:a5:44:33:f7
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4

ahc0 at pci0 dev 2 function 0 "Adaptec AHA-3960D U160" rev 0x01:apic

2 int 11 (irq 11)
scsibus1 at ahc0: 16 targets, initiator 7

ahc1 at pci0 dev 2 function 1 "Adaptec AHA-3960D U160" rev 0x01:apic

2 int 11 (irq 11)
scsibus2 at ahc1: 16 targets, initiator 7
st0 at scsibus2 targ 6 lun 0: <COMPAQ, SDT-9000, 4.20> SCSI2
1/sequential removable

fxp1 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559:apic 2

int 13 (irq 10), address 00:08:02:45:29:64
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 6 function 0 not
configured

piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x92:polling

iic0 at piixpm0

iic0: addr 0x28 00=a0 01=10 02=03 03=01 04=7f 05=04 06=03 07=0008=00

09=00 0b=00 0c=03 0d=41 0e=02 0f=00 10=00 11=05 18=3a 19=10 20=ff
21=ff 28=00 29=00 2a=04 2b=00 2c=00 2d=00 2e=00 30=00 31=00 32=00
38=00 39=00 3a=00 3b=00 3c=00 3d=00 3e=00 40=08 41=08 42=80 48=03
49=03 4a=03 50=00 51=80 58=00 59=00 60=f0 61=f0 68=af 69=af 70=ff
71=00 78=ff 79=ff 80=2b 81=37 82=ff 88=f0 89=f0 8a=f0 90=3c 91=46
92=ff 98=37 99=41 9a=ff a0=22 a1=2d a2=80 a8=ff a9=ff b0=00 b1=00
b8=06 b9=00 words 00=a0a0 01=1010 02=0303 03=0101 04=7f7f 05=0404
06=0303 07=0000
spdmem0 at iic0 addr 0x50: 256MB SDRAM registered ECC PC133CL2

pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev0x92: DMA

atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets

cd0 at scsibus3 targ 0 lun 0: <COMPAQ, CRD-8402B, 1.03> ATAPI 5/cdrom

removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2

ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev0x05:

apic 8 int 10 (irq 10), version 1.0, legacy support
pchb2 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b

Re: random crashes on a firewall with OpenBSD 4.5-stable

Reply via email to