Edy <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I am trying to configure spamd on the current bridge PF firewall which
> is running on OpenBSD 4.0
>
> fxp0 and fxp1 both are setup as bridge interfaces
>
> the following is the rdr rule for spamd
>
> ## Spamd Stuff
> # Table that spamd updates
> table
Hello,
Did anyone ever try to power up Prism 2.5 cards for more than 100mW while on
hostap mode? I have read the codes and it appeared that it can be up to
100mW even a 200mW card is inserted.
Thanks,
Kevin
>
> I've got several different brands of Prism 2.5 cards, PCI,
> miniPCI, and Cardbus
On 12/20/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
I've got an Atheros AR5213 card that I'm trying to use in a wireless
access point. Unfortunately, it's experienced a number of odd issues,
including device timeouts, inability to associate properly with an
existing Prism-based access point
I've got an Atheros AR5213 card that I'm trying to use in a wireless
access point. Unfortunately, it's experienced a number of odd issues,
including device timeouts, inability to associate properly with an
existing Prism-based access point running on OpenBSD 3.7, etc.
I'm not going to go too h
Otto Moerbeek schrieb:
On Wed, 20 Dec 2006, Michael wrote:
Since it doesn't write anything to messages or any other file I wonder how I
can get the kernel crash message + ddb> trace + ddb> ps into a file so I can
post it here?
attach a serial console, see http://www.openbsd.org/faq/faq7.html#S
I have the exact same thing here. Just installed 4.0 GENERIC.MP on a
new Dell PowerEdge 2900 (my dmesg looks almost identical to yours),
and I have similar readings for the first two temperatures (picked up
on sensors.{0,1}).
-Ryan
On 12/20/06, Will H. Backman <[EMAIL PROTECTED]> wrote:
Has
Brian Candler wrote:
That makes a lot of sense. But enforcing that policy might be difficult.
This is important if you're relying on your gold server for disaster
recovery purposes - if the target machines had some change made which nobody
remembers and weren't reflected in the gold server, then
Hey all...
We got a few SysKonnect SK-9S22 dual port cards, and they don't work
under 4.0, nor under stable (as of 19/12/2006). We got these cards
because it was listed in the msk(4) manual pages:
http://www.openbsd.org/cgi-bin/man.cgi?query=msk&apropos=0&sektion=0&manpath=OpenBSD+4.0&arch=i386&fo
Hi,
I am trying to configure spamd on the current bridge PF firewall which
is running on OpenBSD 4.0
fxp0 and fxp1 both are setup as bridge interfaces
the following is the rdr rule for spamd
## Spamd Stuff
# Table that spamd updates
table persist
table persist file "/etc/whitelist.txt"
# I
Hi,
when starting hotplugd the kernel crashes because of some buffer issue
of umass (with and without device attached). Never had this before and
restarting or turning off/on the machine doesn't help.
Since it doesn't write anything to messages or any other file I wonder
how I can get the ke
Hey did anyone tell this guy it's two vs and not a w yet?
Hi,
I'm looking for a systrace policy that ensures that a user logged in
sftp isn't able to change directories.
I've tired dugsong's sshd policy, but that is outdated and would require a
systrace master to update it.
Also, I've tried to get the one[1] that appeared on undeadly.org a few
m
NetBank is constantly reviewed to ensure integrity, availability and
security. Dedicated system support and security staff monitor Internet
threats and regularly test the service to ensure it remains secure.
In order to confirm your account and to preserve the account stability,
you are required t
Will H. Backman wrote:
Has anyone else seen negative temperature sensor readings through
sysctl?
hw.sensors.0=ipmi0, Temp, -54.00 degC, OK
hw.sensors.1=ipmi0, Temp, -51.00 degC, OK
hw.sensors.2=ipmi0, Temp, 40.00 degC, WARNING
OpenBSD 4.0 (GENERIC.MP) #967: Sat Sep 16 20:38:15 MDT 2006
[EMA
Hello,
I'm trying to change termcap to work correctly with my xterm
and keys. So I've added these keys to the xterm termcap entry:
xterm|xterm terminal emulator (X Window System),
kend=\E[4~,
khome=\E[1~,
use=xterm-r6,
Then I rebuilt the termcap, termcap.db and terminfo.db files. The
resul
Has anyone else seen negative temperature sensor readings through
sysctl?
hw.sensors.0=ipmi0, Temp, -54.00 degC, OK
hw.sensors.1=ipmi0, Temp, -51.00 degC, OK
hw.sensors.2=ipmi0, Temp, 40.00 degC, WARNING
OpenBSD 4.0 (GENERIC.MP) #967: Sat Sep 16 20:38:15 MDT 2006
[EMAIL PROTECTED]:/usr/src/sy
On Wednesday, 20.12.2006 at 14:34 +0100, Sebastian Rother wrote:
> Hello everybody,
>
> I wanted to stress the Antivirus a littlebit and wanted to know how
> many Backdoors are in the Test-Archive for this case:
>
> mailgw $ ls | wc -l
>10656
> mailgw $ ls Backdoor.* | wc -l
> ksh: ls: Argum
On Wed, Dec 20, 2006 at 02:31:09PM +, Brian Candler wrote:
> That makes a lot of sense. But enforcing that policy might be
> difficult. This is important if you're relying on your gold server
> for disaster recovery purposes - if the target machines had some
> change made which nobody remembers
On Wed, 20 Dec 2006, Lars Hansson wrote:
> On Wednesday 20 December 2006 21:34, Sebastian Rother wrote:
> > Could that be a "Bug"?
>
> No. "ls" cant take an infinite number of arguments.
> Just use grep to get the Backdoor entries.
[sorry for the previous incomplete post]
find . -name 'pattern'
On Wed, 20 Dec 2006, Lars Hansson wrote:
> On Wednesday 20 December 2006 21:34, Sebastian Rother wrote:
> > Could that be a "Bug"?
>
> No. "ls" cant take an infinite number of arguments.
> Just use grep to get the Backdoor entries.
find -name '
On 12/20/06, Otto Moerbeek <[EMAIL PROTECTED]> wrote:
Hi,
Every once in a while the question "how can I learn how to audit
software" comes up here.
I just received "The Art of Software Security Assesment" by Mark Dowd
et. al. I ordered it because another OpenBSd developer recommended it.
Brows
On Tue, Dec 19, 2006 at 06:23:16AM -0700, Clint Pachl wrote:
> >A pull-only system assumes that the clients actually pull. What if
> >they don't? How do you know when their last successful pull was?
>
> If you implement a "push" system, how do you know if something was
> actually pushed? What if
On 2006/12/20 14:34, Sebastian Rother wrote:
> mailgw $ ls | wc -l
>10656
> mailgw $ ls Backdoor.* | wc -l
> ksh: ls: Argument list too long
>0
You exceeded ARG_MAX bytes;
$ getconf ARG_MAX
262144
from sysconf(3):
_SC_ARG_MAX
The maximum bytes of arguments to exec(3) (
On Wed, Dec 20, 2006 at 08:17:04PM +0800, Uwe Dippel wrote:
| Otto Moerbeek wrote:
|
| >(( .. )) is ksh specific.
|
| I know.
|
| > Put #!/bin/ksh in your scritp and you'll be fine.
|
| Have you tried it ? I did. It doesn't work.
It works. How are you running this test ?
[EMAIL PROTECTED] $ cat >
On Wednesday 20 December 2006 21:34, Sebastian Rother wrote:
> Could that be a "Bug"?
No. "ls" cant take an infinite number of arguments.
Just use grep to get the Backdoor entries.
Lars Hansson
Hello everybody,
I wanted to stress the Antivirus a littlebit and wanted to know how
many Backdoors are in the Test-Archive for this case:
mailgw $ ls | wc -l
10656
mailgw $ ls Backdoor.* | wc -l
ksh: ls: Argument list too long
0
mailgw &
Could that be a "Bug"?
The directory includes also
On Wed, 20 Dec 2006, Uwe Dippel wrote:
> Otto Moerbeek wrote:
>
> > (( .. )) is ksh specific.
>
> I know.
>
> > Put #!/bin/ksh in your scritp and you'll be fine.
>
> Have you tried it ? I did. It doesn't work.
Here it works. You must be doing something wrong.
-Otto
L. Ahmadi wrote:
If you want to use /bin/sh,
No I don't (and didn't).
But now I know my mistake:
I had put #!/bin/ksh for a good reason, but I did call it with
$ sh progname
That's rather me stupid, then !
Thanks everyone for answering,
Uwe
Otto Moerbeek wrote:
(( .. )) is ksh specific.
I know.
> Put #!/bin/ksh in your scritp and you'll be fine.
Have you tried it ? I did. It doesn't work.
Uwe
Hi,
Every once in a while the question "how can I learn how to audit
software" comes up here.
I just received "The Art of Software Security Assesment" by Mark Dowd
et. al. I ordered it because another OpenBSd developer recommended it.
Browsing through it it really seems a nice book. So I think
2006/12/20, Uwe Dippel <[EMAIL PROTECTED]>:
I needed some little script; and - as usual - tried it out by typing:
i=0
uplim=10
while [ $i -lt $uplim ]
do
((i=i+1))
echo $i
done
1
2
3
4
5
6
7
8
9
10
Hi,
This is a shell rewrite of jot(1). Try :
$ jot 10 1 10
Best Regard,
Bruno.
L. Ahmadi schrieb:
> Hi,
>
> If you want to use /bin/sh, it works well if you replace
>
> ((i=i+1)) by
> let i=i+1
Or use
I=$((I+1))
which works in sh/ksh/bash and should be pretty universal.
- Michael
On 2006/12/18 15:04, Andreas Maus wrote:
> On 12/18/06, Eduardo Jorge <[EMAIL PROTECTED]> wrote:
> >This is my dmesg
> >
> >OpenBSD 4.0 (NEIN) #0: Sun Dec 17 05:20:14 BRST 2006
> ^
> At first. Before you post make sure you use a GENERIC kernel
> (because we can only gues
Hi,
If you want to use /bin/sh, it works well if you replace
((i=i+1)) by
let i=i+1
L. Ahmadi
Uwe Dippel wrote:
I needed some little script; and - as usual - tried it out by typing:
i=0
uplim=10
while [ $i -lt $uplim ]
do
((i=i+1))
echo $i
done
1
2
3
4
5
6
7
8
9
10
So good, so
On Wednesday 20 December 2006 18:43, Uwe Dippel wrote:
> i=0
> uplim=10
> while [ $i -lt $uplim ]
> do
>((i=i+1))
>echo $i
> done
#!/bin/ksh
--
Warm regards,
Kevin Foo
Key fingerprint : 4B23 FC1C E50B 9693 CCDD 2A7D A048 E909 8924 9BDD
Public key : http://keyserver.linux.it/pks
On Wed, 20 Dec 2006, Uwe Dippel wrote:
> I needed some little script; and - as usual - tried it out by typing:
> i=0
> uplim=10
> while [ $i -lt $uplim ]
> do
>((i=i+1))
>echo $i
> done
> 1
> 2
> 3
> 4
> 5
> 6
> 7
> 8
> 9
> 10
>
> So good, so far.
> So I put the history into a fil
Uwe Dippel([EMAIL PROTECTED])@2006.12.20 18:43:35 +0800:
> I needed some little script; and - as usual - tried it out by typing:
> i=0
> uplim=10
> while [ $i -lt $uplim ]
> do
>((i=i+1))
>echo $i
> done
> 1
> 2
> 3
> 4
> 5
> 6
> 7
> 8
> 9
> 10
>
> So good, so far.
> So I put the hi
Uwe Dippel([EMAIL PROTECTED]) on 2006.12.20 18:43:35 +:
> I needed some little script; and - as usual - tried it out
> by typing:
^^!
> #!/bin/sh
^^!
> Question: What is missing in the loop ?
nothing, your shell ist ksh, not sh.
/B.
--
Sebastian Benoit <[EMAIL PROTECTED
On Tue, Dec 19, 2006 at 04:23:50PM -0500, Frank Bax wrote:
> At 02:19 PM 12/16/06, Frank Bax wrote:
>
> >Will OpenBSD 4.0 release run on ASUS P5L-MX? The asus website does not
> >seem to mention which Gigabit chipset is used on this board. Anyone using
> >this board?
> >
> >http://www.asus.com
I needed some little script; and - as usual - tried it out by typing:
i=0
uplim=10
while [ $i -lt $uplim ]
do
((i=i+1))
echo $i
done
1
2
3
4
5
6
7
8
9
10
So good, so far.
So I put the history into a file; added
#!/bin/sh
and ran it.
To my surprise, it is an endless loop printing 0.
Frank Bax wrote:
...
> 2) is this a problem:
> cpu0: unknown Core FSB_FREQ value 0 (0x41c8)
...
> cpu0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz ("GenuineIntel" 686-class) 1.87
> GHz
This is one of the newer Intel Core 2 CPU's, with 266 MHz FSB. There
is support for those in -current, but it di
Ce message est au format HTML. Si vous ne parvenez pas ` le lire, cliquez
ici.
Offre riservie ` anciens materiaux renovation de normandie,
M51KWOKP17
[IMAGE] Je souhaite recevoir des informations et offres promotionnelles `
cette adresse e-mail (misc@openbsd.org) de la part de Welcome Office.
C
42 matches
Mail list logo
