Hi,
when starting hotplugd the kernel crashes because of some buffer issue
of umass (with and without device attached). Never had this before and
restarting or turning off/on the machine doesn't help.
Since it doesn't write anything to messages or any other file I wonder
how I can get the kernel crash message + ddb> trace + ddb> ps into a
file so I can post it here?
Thanks in advance.
- Michael
dmesg:
OpenBSD 4.0-current (GENERIC) #1287: Tue Dec 19 13:50:08 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz ("GenuineIntel" 686-class) 3.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID
real mem = 1072984064 (1047836K)
avail mem = 970637312 (947888K)
using 4256 buffers containing 53772288 bytes (52512K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/23/05, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.3 @ 0xf04d0 (79 entries)
bios0: ASUSTeK Computer INC. P5AD2-E-Premium
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8160/352 (20 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xee00!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82925X MCH Host" rev 0x0e
ppb0 at pci0 dev 1 function 0 "Intel 82925X PCIE" rev 0x0e
pci1 at ppb0 bus 5
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600 GT" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: irq 10
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: CMedia CMI9880 (rev. 0.2), HDA version 0.9
azalia0: /usr/src/sys/dev/pci/azalia.c/1159 invalid PCM format: 0x00000000
delete_encodings...
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04
pci3 at ppb2 bus 3
mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Marvell
Yukon-2 EC rev. A2 (0x1): irq 10
msk0 at mskc0 port A, address 00:11:d8:46:6f:bc
eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
ppb3 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04
pci4 at ppb3 bus 2
mskc1 at pci4 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Marvell
Yukon-2 EC rev. A2 (0x1): irq 5
msk1 at mskc1 port A, address 00:11:d8:46:6a:42
eephy1 at msk1 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd4
pci5 at ppb4 bus 1
vendor "TI", unknown product 0x8025 (class serial bus subclass Firewire,
rev 0x01) at pci5 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-108, 1.20> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x04: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 3 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD740GD-00FLA0>
wd0: 16-sector PIO, LBA48, 70911MB, 145226112 sectors
wd1 at pciide1 channel 0 drive 1: <WDC WD1600YD-01NVB1>
wd1: 16-sector PIO, LBA48, 157066MB, 321672960 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide1 channel 1 drive 0: <WDC WD740GD-50FLA2>
wd2: 16-sector PIO, LBA48, 70911MB, 145226112 sectors
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: irq 3
iic0 at ichiic0
lm1 at iic0 addr 0x2f: W83791SD
iic0: addr 0x4e 00=00 01=00 02=00 03=00 04=00 05=80 06=07 07=00 08=00
09=00 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=00 12=00 13=00 14=00 15=00
16=00 17=00 18=00 19=00 1a=00 1b=00
1c=00 1d=00 1e=00 1f=00 20=00 21=00 22=00 23=00 24=00 25=00 26=00 27=00
28=00 29=00 2a=00 2b=00 2c=00 2d=00 2e=00 2f=00 30=00 31=00 32=00 33=00
34=00 35=00 36=00 37=00 38=00 39=0
0 3a=00 3b=00 3c=00 3d=00 3e=00 3f=00 40=00 41=00 42=00 43=00 44=00
45=00 46=00 47=00 48=00 49=00 4a=00 4b=00 4c=00 4d=00 4e=00 4f=00 50=00
51=00 52=00 53=00 54=00 55=00 56=00 57
=00 58=00 59=00 5a=00 5b=00 5c=00 5d=00 5e=00 5f=00 60=00 61=00 62=00
63=00 64=00 65=00 66=00 67=00 68=00 69=00 6a=00 6b=00 6c=00 6d=00 6e=00
6f=00 70=00 71=00 72=00 73=00 74=00
75=00 76=00 77=00 78=00 79=00 7a=00 7b=00 7c=00 7d=00 7e=00 7f=00 80=00
81=00 82=00 83=00 84=00 85=00 86=00 87=00 88=00 89=00 8a=00 8b=00 8c=00
8d=00 8e=00 8f=00 90=00 91=00 92=0
0 93=00 94=00 95=00 96=00 97=00 98=00 99=00 9a=00 9b=00 9c=00 9d=00
9e=00 9f=00 a0=00 a1=00 a2=00 a3=00 a4=00 a5=00 a6=00 a7=00 a8=00 a9=00
aa=00 ab=00 ac=00 ad=00 ae=00 af=00 b0
=00 b1=00 b2=00 b3=00 b4=00 b5=00 b6=00 b7=00 b8=00 b9=00 ba=00 bb=00
bc=00 bd=00 be=00 bf=00 c0=00 c1=00 c2=00 c3=00 c4=00 c5=00 c6=00 c7=00
c8=00 c9=00 ca=00 cb=00 cc=00 cd=00
ce=00 cf=00 d0=00 d1=00 d2=00 d3=00 d4=00 d5=00 d6=00 d7=00 d8=00 d9=00
da=00 db=00 dc=00 dd=00 de=00 df=00 e0=00 e1=00 e2=00 e3=00 e4=00 e5=00
e6=00 e7=00 e8=00 e9=00 ea=00 eb=0
0 ec=00 ed=00 ee=00 ef=00 f0=00 f1=00 f2=00 f3=00 f4=00 f5=00 f6=00
f7=00 f8=00 f9=00 fa=00 fb=00 fc=00 fd=00 fe=00 ff=00
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0x88)
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
uhidev0 at uhub1 port 2 configuration 1 interface 0umass0 at uhub3 port
1 configuration 1 interface 0
uhidev0: Razer Razer 1600dpi Mouse, rev 2.00/23.00, addr 2, iclass 3/1
umass0: vendor 0x058f USB Reader, rev 1.10/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
ums0 at uhidev0: 7 buttons and Z dir.
wsmouse0 at ums0 mux 0
sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0
0/direct removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0
0/direct removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0
0/direct removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0
0/direct removable
sd3: drive offline
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x81
dkcsum: wd1 matches BIOS drive 0x82
dkcsum: wd2 matches BIOS drive 0x80
root on wd2a
rootdev=0x20 rrootdev=0x320 rawdev=0x322
WARNING: / was not properly unmounted
umass1 at uhub4 port 5 configuration 1 interface 0
umass1: vendor 0x13fe USB DISK 28X, rev 2.00/1.00, addr 2
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets
sd4 at scsibus2 targ 1 lun 0: <, USB DISK 28X, PMAP> SCSI0 0/direct
removable
sd4: 471MB, 471 cyl, 64 head, 32 sec, 512 bytes/sec, 964608 sec total
umass1: at uhub4 port 5 (addr 2) disconnected
sd4 detached
scsibus2 detached
umass1 detached
