On 10/30/06, patrick ~ <[EMAIL PROTECTED]> wrote:
I'm going to try swapping out modules, maybe I'll
get lucky.
unrelated but needing an archive mention is
something odd I just ran across with the deadly
uncorrectable sector messages is that I had
two used maxtor drives that died on me after
cha
Hi Jean-Daniel,
> Is there any company doing a ready-to-use board with this chip?
> Something like what soekris does...but with the VIA C7 chip...
I have received my first Jetway mini-itx board yesterday. My supplier
lists it as:
Jetway J7F4K Series VIA CN700 VIA C7 @ 1.5 GHz D (TDP 25 W)
It ha
On Thu, 26 Oct 2006 23:28:41 -0400, STeve Andre' wrote
> On Thursday 26 October 2006 20:16, smith wrote:
> > > Some people like to run antivirus software on UNIX boxes to ensure
> > > they're not carriers for Windows viruses, etc. Personally, I
> > > think it should be the responsibility of the Wi
Thanks for the insightful info. Yes, as another
user had suggested privately, I was running
memtest86 since pretty much my post last night
(early morning).
Thus far 16 passes, running almost 17 hours and
no errors. Although, I know, and as you pointed
out, no errors doesn't really rule out bad me
Tobias Weingartner wrote:
In article <[EMAIL PROTECTED]>, Breen Ouellette wrote:
I feel that if the user base can meet the financial needs of the project
then the user base is doing its part. Unfortunately, I know of several
people who use OpenBSD that will never send in a flat penny. The
Sweet
Is there any company doing a ready-to-use board with this chip?
Something like what soekris does...but with the VIA C7 chip...
JD
Is the VIA C7 cpu fully supported yet?
C7-M dmesg below.
The padlock feature designed to speed up crypto looks useful.
type 16 bytes 64 bytes256 bytes 1024 bytes 8192 bytes
aes-128-cbc 31885.24k 118568.67k 312349.58k 535048.83k 649099.91k
Regards,
Greg
Op
On 10/30/06, smith <[EMAIL PROTECTED]> wrote:
Put load on server?
b = yes
w = no
*snicker*
Protect a network from an infected laptop?
b = no
w = yes
Pfff!
At best I'd say "w = possibly yes" having seen various antivirus
programs pop and say "i detected that i'm propagating this malwar
After tar has finished writing to the tape device is there
a way to see how large the finished tar on tape is?
Also, is there a way to monitor the transfer rate to the
tape device?
On Fri, 27 Oct 2006 08:53:00 -0400, stuartv wrote
>
> working on it). The reason we run AV at the border AND on the
> inside boxes is quite simply that I have seen way too many times in
> my carreer a virus be ignored by one AV package but caught by
> another. Security is a must where I work
On Tue, Oct 31, 2006 at 02:24:58AM +0100, Jean-Gerard Pailloncy wrote:
> How to solve this ?
> Create flavor no_x11 ?
> But, I need the freetype2 ! and there is no package.
> Create a freetype2 package ?!?!
> Or install X11...
It seems like you should already know what you need to do (per the
FAQ[
Is the VIA C7 cpu fully supported yet?
According to http://www.openbsd.org/i386.html#hardware ,
only the VIA C3 is supported.
According to http://www.openbsd.org/40.html#new ,
Improved speed control on some systems:
* New SpeedStep detection code, also adds support for VIA C7-M, and
sever
Hi,
I have a soekris that I udpdate to OpenBSD 4.0.
I want to install symon, that use gd2 that use freetype2 that is part
of X11.
I do not have installed X11 on the soekris drive (obviously).
There is no "no_x11" flavor for g2.
There is no package for freetype2.
How to solve this ?
Create fl
It was pointed out to me in private e-mail that I mistakenly assumed
telnet to be telnet and not ssh. I'm quoting parts of the private
e-mail I received to the list in the hopes of educating others on the
use of ssh.
On Mon, Oct 30, 2006 at 04:04:34PM -0500, Eric Furman wrote:
| On Mon, 30 Oct 200
On 10/30/06, stuartv <[EMAIL PROTECTED]> wrote:
Can anyone point me at some sample code for kevent. I am trying to
write a program that will watch a file for a write and can then
read the new lines and act upon them. So far, I get the first event
but not subsequent events.
tail(1) uses kevent
Kyle George wrote:
On Mon, 30 Oct 2006, Dag Richards wrote:
I can not seem to get more that ~43 megabytes per second through
the bge cards on these boxes. This is the unencrypted speed
with the cards attached by x-over cable or on a 2950 switch with only
these two boxes attached.
[snip]
Any
On Mon, Oct 30, 2006 at 10:40:53PM +0100, Ingo Schwarze wrote:
> The improvement was committed more than a month before we
> discussed the point... Somewhat amazing, i must say...
> Apparently, reading source-changes@ is useful when trying
> to answer questions. :-/
Sorry for not warning you gu
OpenCON 2006, the OpenBSD conference will be held in Venice, Italy,
December 2-3.
Massimiliano Stucchi wrote:
EuroBSDCon, the main European BSD event is coming up in less than two
weeks.
I do not want to miss this occasion to make you aware of a different
event that is also taking in place i
On 10/30/06, Otto Moerbeek <[EMAIL PROTECTED]> wrote:
On Mon, 30 Oct 2006, Bill Marquette wrote:
> I understand that the ps -ax would have spawned at least one more
> process (and a header) than the sysctl count, but I'm not seeing why
> sysctl is showing 11 more processes than ps does:
> $ sys
Here is a late afterthought...
I wrote on Mon, Oct 02, 2006 at 11:36:38PM +0200:
>> Karel Kulhavy wrote:
>>> I tried to mount a CD-ROM twice:
>>> [EMAIL PROTECTED]:~$ mount /dev/cd0c /mnt/cdrom
>>> mount_ffs: /dev/cd0c on /mnt/cdrom: \
>>> specified device does not match mounted device
As soon
I've been using Google Calendar to organize my calendar, find interesting
events, and share my schedule with friends and family members. I thought you
might like to use Google Calendar, too.
-- Da Ve
recommends that you use Google Cal
Joachim Schipper wrote:
I believe it is possible to set this up using FastCGI, which will
actually be (reasonably?) fast too.
Yes, I am a FastCGI fanboy.
I just spent the whole day setting up FastCGi using www/mod_fastcgi and
www/fcgi. I ended up with a server process, written C, that runs
Can anyone point me at some sample code for kevent. I am trying to
write a program that will watch a file for a write and can then
read the new lines and act upon them. So far, I get the first event
but not subsequent events.
Stuart van Zee
[EMAIL PROTECTED]
[Excuse me for the very late reaction, please; I was away this weekend.]
On Thu, Oct 26, 2006 at 03:46:45PM -0700, John Draper wrote:
> Joachim Schipper wrote:
> >>I also posted this to the snort users list, [EMAIL PROTECTED], but
> >>(sigh) my postings are not making it to the list. Have they
On Sun, Oct 29, 2006 at 11:59:33PM +0100, LeVA wrote:
> 2006. October 29. 22:30, viq:
> > On 29/10/06, LeVA <[EMAIL PROTECTED]> wrote:
> > > Hi!
> > >
> > > There was a commit today which updates postgresql to version 8.1.5.
> > > This fix made it to the stable branch too, so will there be a
> > >
On Sun, Oct 29, 2006 at 03:20:25PM +0100, Aiko Barz wrote:
> Hello,
>
> I already discussed this subject on the list. There were several
> possible solutions for this subject and I have chosen one, I would like
> to present now.
>
> The problem: I have several vhosts, which are used by several pe
In article <[EMAIL PROTECTED]>, Breen Ouellette wrote:
>
> I feel that if the user base can meet the financial needs of the project
> then the user base is doing its part. Unfortunately, I know of several
> people who use OpenBSD that will never send in a flat penny. These are
> the same pe
| I'm in this case too using OpenBSD 4.0-current (GENERIC) #1163: Thu
| Oct 19 14:40:44 MDT 2006 :
|
| ural0 at uhub0 port 1
| ural0: Nintendo Nintendo Wi-Fi USB Connector, rev 2.00/0.01, addr 2
| ural0: MAC/BBP RT2571 (rev 0x05), RF RT2526, address 00:0d:0b:c3:cb:bb
|
| ural0 is in hostap mode, /e
Could you please run the following commands on your ral-based
access point, preferably before and after the rssadapt->AMRR
change:
# netstat -i
# ifconfig -M ral0
Thanks,
Damien
| I'm running Canyon CN-WF511 wireless PCI card (Ralink RT2561S)
| in hostap mode in my 30m2 flat, serving one laptop
On Mon, 30 Oct 2006, Dag Richards wrote:
I can not seem to get more that ~43 megabytes per second through
the bge cards on these boxes. This is the unencrypted speed
with the cards attached by x-over cable or on a 2950 switch with only
these two boxes attached.
[snip]
Any suggestions?
Try b
On 10/30/06, Dag Richards <[EMAIL PROTECTED]> wrote:
I can not seem to get more that ~43 megabytes per second through
the bge cards on these boxes. This is the unencrypted speed
with the cards attached by x-over cable or on a 2950 switch with only
these two boxes attached.
I am running 4.0 usi
Otto Moerbeek wrote:
On Sat, 28 Oct 2006, Breen Ouellette wrote:
I honestly do not know as I do not have access to the size of the
user base
nor the financial needs of the project. If 5000 users gave $100 per year to
the project that would be half a million dollars. Are there 5000 users? Is
hal
I have a pair of Sunfire x2100's I am trying to configure as vpn
"routers" to bridge between two Data Centres.
isakmpd - easy working
bridging - also easy
bridging over ipsec tunnel - surprisingly easy as well
The problem I am having is the one part that I
_assumed_ would be the easiest.
I ca
I have a pair of Sunfire x2100's I am trying to configure as vpn
"routers" to bridge between two Data Centres.
isakmpd - easy working
bridging - also easy
bridging over ipsec tunnel - surprisingly easy as well
The problem I am having is the one part that I
_assumed_ would be the easiest.
I ca
This is on a 400mhz 1st gen tibook. It boots & runs fine with 3.9.
Unfortunately the keyboard isn't doing anything useful, so all i can
report is what's on the screen:
the last message is:
-
openpic0 at macobio0 offset 0x4000panic: trap type 200 at 2eafb0
( openpic_do_pending_int+0x230
> In order to have sane configuration defaults in OpenBSD, what are the
> good reasons to not disable ssh root access,
Machine administration.
> and to not disable sshv1
> protocol by default ?
I am actually more worried about security problems in the protocol 2
code which is roughly 4-5x as com
On Sun, Oct 29, 2006 at 11:44:41AM +0100, Jonathan Thornburg wrote:
> The main thing I've found which doesn't work at all well is sending video
> to the external video connector to drive a projector for conference
> presentations. The usual tricks like changing the X resolution (with
> 'xrandr')
On Mon, 30 Oct 2006, Bill Marquette wrote:
> I understand that the ps -ax would have spawned at least one more
> process (and a header) than the sysctl count, but I'm not seeing why
> sysctl is showing 11 more processes than ps does:
> $ sysctl kern.nprocs && (ps -ax |wc -l) && sysctl kern.nprocs
On 10/30/06, Bill Marquette <[EMAIL PROTECTED]> wrote:
I understand that the ps -ax would have spawned at least one
more process (and a header) than the sysctl count, but I'm not
seeing why sysctl is showing 11 more processes than ps does:
Check out the -k option to ps.
Philip Guenther
Bruno Carnazzi wrote:
> 2006/10/30, daniel <[EMAIL PROTECTED]>:
>> Bruno Carnazzi wrote:
>> > In order to have sane configuration defaults in OpenBSD, what are the
>> > good reasons to not disable ssh root access, and to not disable sshv1
>> > protocol by default ?
>>
>> It's insane if you can't lo
2006/10/30, daniel <[EMAIL PROTECTED]>:
Bruno Carnazzi wrote:
> In order to have sane configuration defaults in OpenBSD, what are the
> good reasons to not disable ssh root access, and to not disable sshv1
> protocol by default ?
It's insane if you can't login after a fresh install...
But a fr
I understand that the ps -ax would have spawned at least one more
process (and a header) than the sysctl count, but I'm not seeing why
sysctl is showing 11 more processes than ps does:
$ sysctl kern.nprocs && (ps -ax |wc -l) && sysctl kern.nprocs
kern.nprocs=46
35
kern.nprocs=46
This machine
2006/10/30, Erki Malling <[EMAIL PROTECTED]>:
I'm running Canyon CN-WF511 wireless PCI card (Ralink RT2561S)
in hostap mode in my 30m2 flat, serving one laptop next room.
The wireless quality has always been less than stellar, even
when few meters from the OpenBSD box antenna. But it works for
re
Hello,
I'm using OB3.9 release version, and X.org plus fvwm2, after start X
windows, what I got is my LCD monitor repeat black screen between several
minutes, even there have keyboard and mouse movement. after black screen, I
can ctrl+alt+F1 then ctrl_alt+F5 to switch back screen. keyboard and mou
Hi all,
Reading Theo de Raadt's presentation about exploit mitigation
techniques, I could not understand the advantages of using randomized
malloc and randomized mmap techniques. I've searched on the Internet
about this subject but I couldn't find a thing, maybe because this
subject is too techni
I just had to mention that the OpenBSD audio cd is great for playing
at the office.
Thanks OpenBSD! Not only is the operating system a pleasure to use,
but the music has us all in great spirits here.
Mike H
Hi misc,
In order to have sane configuration defaults in OpenBSD, what are the
good reasons to not disable ssh root access, and to not disable sshv1
protocol by default ?
Best regards,
Bruno.
Hi,
Patch applies cleanly and appears to work great:
[EMAIL PROTECTED] ~> tcpdump -i bge1 stp
tcpdump: listening on bge1, link-type EN10MB
15:25:02.061139 802.1d RSTP config flags=0x3c
root=6011.0:18:74:61:e5:40 rootcost=0x0 bridge=6011.0:18:74:61:e5:40
port=0x8630 age=0/0 max=20/0 hello=2/0
On Mon, Oct 30, 2006 at 01:06:14PM +0200, Erki Malling wrote:
> I'm running Canyon CN-WF511 wireless PCI card (Ralink RT2561S)
> in hostap mode in my 30m2 flat, serving one laptop next room.
> The wireless quality has always been less than stellar, even
> when few meters from the OpenBSD box antenn
I have it working a similar setup. All you need once the openldap side
is runnning (and there are lots of docs about OpenLDAP for users
authentication out there):
Thanks, got openldap with bdb up using various example conf files...
Getting the openldap side supporting a table or index or proper
Jay Jesus Amorin wrote:
> hi,
>
> pls. help me mount my partition in my linux partitions
...
http://www.openbsd.org/faq/faq14.html#foreignfs
Nick.
I'm running Canyon CN-WF511 wireless PCI card (Ralink RT2561S)
in hostap mode in my 30m2 flat, serving one laptop next room.
The wireless quality has always been less than stellar, even
when few meters from the OpenBSD box antenna. But it works for
reading mail and news and thats all that matters
> I've not see this type of problem before, so I
> turn to you guys. Is this a sign that maybe
> a drive is going bad? Or sign of bad memory?
>
> What's going on here!? I know it is almost
> Halloween and all, but this is kinda _spooky_
> to say the least.
>
>
> Idea? Please? :-)
Hard drives
Hi all,
EuroBSDCon, the main European BSD event is coming up in less than two
weeks.
We would also like to inform that people who want to attend the event
should sign up as soon as possible in order to take advantage of the
early bird rate, which will be available until November 2.
Way more than
Are you in /usr/src/ when you apply the patch?
Did you download and unpack the source tree? Does no good to patch
something that isn't there.
--
Joel Goguen
Bachelor of Computer Science III
University of New Brunswick
http://iapetus.dyndns.org/
Maverick wrote:
> uppsss
>
> I am sorry I for
On Mon, Oct 30, 2006 at 12:38:59AM -0500, Eric Furman wrote:
| On Sun, 29 Oct 2006 23:12:49 +0100 (CET), "Otto Moerbeek"
| <[EMAIL PROTECTED]> said:
| > > but as has been pointed out, it is trivial to write a script
| > > that would automatically go out and modify /etc/group
| > > on even a large n
I just finished installing OpenBSD 4.0 on a
machine of mine. After installation first
thing I did was to get some ports installed.
First post was PostgreSQL. Running 'make build'
failed with an error pointing in configure
script. I looked at it to see if it was the
patch process that messed up o
57 matches
Mail list logo
