Dear Harry,
Regarding speaking the attributes of the text you are reading, press
control+shift+v and you will find yourself in the dialogue box where yo you can
adjust various values for Voiceover. One of them is speak text attributes.
There are other useful functions of Voiceover you can chang
Hi, You'll need a serial adapter to get your romeo running on the mac, but then
louis will support it for translating and embossing braille.
Best,
Erik Burggraaf
Introducing Ebony Consulting business card transcription service, starting at
$0.45 per card or $35 per hundred cards.
Ebony Consulti
Hi, or you could use a free word processor called Bean. It is regularly updated
as well and through it you can check your word count which is why I was looking
for an alternative to text edit which didn't provide the word count feature.
Just google Bean and it should be the 1st result. I don't t
And, if you wish an anti virus app, you might give Clamxav a go. Use the
version on the site:
www.clamxav.com
because the version in the app store does not offer the century feature.
Microsoft office wil not work on the Mac, but, text edit is a nice and full
featured app.
Can't ansewr your r
Or, perhaps one could look in the ITunes app store; which, as you may know,
features some apps not to be found in the Mac app store.
Sincerely,
The Constantly Barefooted Ray!!!
Now a very proud and happy Mac user!!!
Skype name:
barefootedray
On Jul 9, 2012, at 7:43 AM, Daniel McGee wrote:
>
Hi Scott.
I have a PacMate. It will not work as a direct braille display on the Mac,
unless you take the braille display off the PacMate part. This is not true of
some note takers where you have different modes. Just take the braille display
off, and VoiceOver should immediately recognize it wh
The tricky bit is that Time Machine will continue to grow the size of
the backup set until it fills all available space. After that it prunes
the oldest stuff in prep for new backups. The end result is that if you
don't keep it on its own partition time machine will eventually use up
the entire
Good morning all,
I have a drive, and it already has my Time machine back up, and some other
stuff on it, can I partision it with all that stuff on it, or do I need to
remove it all first?
Any help would be greatly apreciated!
--
You received this message because you are subscribed to the Googl
What are you using for the USB interface? I picked up an ART USB Dual
Pre and found that I had to crank the gain all the way up with my Shure
SM58 to get a reasonable signal level. Of course I was trying spoken
word and not loud singing so maybe it's just my particular application.
CB
On 7/7/
Hi,
I believe it erases everything on the drive, and then particians it. I could
be wrong, though, so asking for a second opinion would be helpful. *smiles*
-Original Message-
From: macvisionaries@googlegroups.com
[mailto:macvisionaries@googlegroups.com] On Behalf Of Angie Giltinan
Sent:
Hello Harry,
You can find text attributes by pressing VO-t. However, in Pages, you can't
detect the highlighting of text by colour, also known as shading, but you can
do this in TextEdit.
I doubt that anyone is going to do an in-depth podcast on pages as it would
take much too long.
Training
Hi,
nah. She can add another partition without erasing the drive. The problem is,
setting the size of the newly add partition is a bit of a pain. The last time
I checked, this wasn't accessible with Voiceover. There is a splitter you need
to move like that found in mail for example. To the
How do I partition a drive with vo
On Jul 9, 2012, at 9:13 AM, Chris Blouch wrote:
> The tricky bit is that Time Machine will continue to grow the size of the
> backup set until it fills all available space. After that it prunes the
> oldest stuff in prep for new backups. The end result is that
Hi,
did you also try turning up the volume of the track? I'm assuming you were
using Garageband?
Ricardo Walker
rica...@appletothecore.info
Twitter:@apple2thecore
www.appletothecore.info
On Jul 9, 2012, at 10:33 AM, Chris Blouch wrote:
> What are you using for the USB interface? I picked up
Ok, I forgot about that resize control. Yes, that's not accessible with
VoiceOver, unfortunately.
-Original Message-
From: macvisionaries@googlegroups.com
[mailto:macvisionaries@googlegroups.com] On Behalf Of Ricardo Walker
Sent: Monday, July 09, 2012 10:10 AM
To: macvisionaries@googlegro
Yup. Used to be pretty good. Dunno if this is a voiceover issue or an
OpenOffice issue. Since none of my other apps had this kind of
regression when I upgraded to 10.7 I'm assuming this is something to do
with OpenOffice. That said, they keep putting out releases and getting
things working agai
Hi, How do you partition a drive? Can someone give me step by step instruction
using vo.
--
You received this message because you are subscribed to the Google Groups
"MacVisionaries" group.
To post to this group, send email to macvisionaries@googlegroups.com.
To unsubscribe from this group, sen
Hi,
If you want to just add a partition, your going to run into problems because
resizing the new partition is not accessible with VO. You might want to erase
the drive and partition from the beginning so you can set the sizes.
Ricardo Walker
rica...@appletothecore.info
Twitter:@apple2thecore
I can turn it up in Garage Band but I was expecting the signal to be
'hotter' coming out of the USB box. So I can work around it, just wasn't
the same as my old setup with a Mackie mixer. That was borrowed and had
to go back to its owner. The pre-amps on that seemed to crank up a lot
more than
Short answer is with a utility called Disk Utility which is in your
Utilities folder (command-shift-u to get there from finder). There have
been detailed descriptions on this list on exactly how to use it so if
you can't figure things out just ping back and I'll try to dig one of
those up, unle
I understand that but how do I do this.
On Jul 9, 2012, at 10:28 AM, Ricardo Walker wrote:
> Hi,
>
>
> If you want to just add a partition, your going to run into problems because
> resizing the new partition is not accessible with VO. You might want to
> erase the drive and partition from th
Chris, a longer answer with instructions would be greatly appreciated.
Thanks,
On Jul 9, 2012, at 10:45 AM, Chris Blouch wrote:
> Short answer is with a utility called Disk Utility which is in your Utilities
> folder (command-shift-u to get there from finder). There have been detailed
> descript
as for the size thing, the sizes are ok, and i'm happy with the results of my
partition.
On Jul 9, 2012, at 11:13 AM, Daniel Miller wrote:
> Ok, I forgot about that resize control. Yes, that's not accessible with
> VoiceOver, unfortunately.
>
>
> -Original Message-
> From: macvisionari
Where do I obtain Louis. I have heard of it but don't remember what web
site it's on.
On 7/9/2012 06:32, erik burggraaf wrote:
Hi, You'll need a serial adapter to get your romeo running on the mac,
but then louis will support it for translating and embossing braille.
Best,
Erik Burggraaf
Found some stuff on Mac For The Blind here:
http://macfortheblind.com/how-to-for-the-Mac-and-OS-X
which is a reproduction of a MacVisionaries email from Scott Bresnahan.
CB
On 7/9/12 11:50 AM, Stacey Robinson wrote:
Chris, a longer answer with instructions would be greatly appreciated.
Thanks
Brandon,
Yeah I tried that out last night and it worked great.
i completely missed the options there.
thank you for helping. I love it when a problem has a simple easy fix!
Mike
On Jul 9, 2012, at 12:37 AM, Brandon Olivares wrote:
> Hi Mike,
>
> Have you created a new se
Anne,
Thank you very much for this Skype resource on Pages training. I may take that
up, since I am about to become a certified Spanish/English translator, so
things like formatting will be important for the look of the documents.
And, as an aside, it sounds like Text Edit is a bit more powerf
Hi All,
Those of you in the U.S. who have a membership with Learning Ally (which used
to be named Reading for the Blind and Dyslexic) can currently download the
Learning Ally Audio app for free. It's normally $19.99, and is used to
download and play DAISY books from Learning Ally. You must ha
All, sorry about the confusing subject,
here's my question.
1. I am in Safari, then, I switch back to Syrinx or mail, or anything else that
has tables.
2. I attemppt to use up arrow to move up a row in the table with quick nav on,
I can't do it.
3. if I use the left arrow to move, I can do it j
Hi all, subject explains it all. a few days ago I was on Adim chatting to at
least two friends and it got to the point where they were sending not in long
duration of each other. The issue I had was that I'd be doing something on
Safari and focus would drag me back to adium without my consent an
I would suggest turning quick nav off. It works great in Safari, but needs to
be off if you want to navigate tables in other apps.
Good luck,
Rachel
On Jul 9, 2012, at 12:04 PM, Angie Giltinan wrote:
> All, sorry about the confusing subject,
> here's my question.
> 1. I am in Safari, then, I swi
Not sure if this will help as I still don't have my Mac yet.
I saved this message from the list some months a go.
Max.
Original Message
Hi all!
This was posted on another list!
And I thought it would interest some of you!
You
Hi All,
I use the Prizmo app with my iPhone 4's camera to OCR text. However, recently
I've been using a wireless scanner on my network that I control with an iOS app
named VueScan Mobile to send scans to the camera roll on my iPhone or iPad, and
then using OCR apps like Prizmo or TextGrabber t
All,
I am using wordpress.com and I want to find out if it is possible to
add one of those contact us form to it.
If my terminology is wrong what I am aiming for is a link that will
take the user to a page where they type in their email address and then the
message and then can s
Hi Gerry,
This book is one you have to pay for but in saying that is sounds full
of very good information.
Regards Dean
Sent from Dean Adams Macbook Pro
breezepa...@gmail.com
Voip phone: +6124307 9248
landline Phone: +61243892195
Mobile: +61428133758
Skype : deanadams9
On 07/07/2012, at
I seem to have gotten myself stuck in unity mode with Windows and Mac. Can
someone please tell me how to exit out of unity mode so that I can use just Mac
or Windows?
Thanks.
--
You received this message because you are subscribed to the Google Groups
"MacVisionaries" group.
To post to this g
36 matches
Mail list logo
