Hi
I'm using the book (mwbk) document type, but all bullets (itemize)
appear as dashes. What would be the easiest way to prevent this?
Regards
Gordon
--
gordon <[EMAIL PROTECTED]>
Hi
I'm afraid that doesn't work. All bullets on all levels are dashes.
On Thu, 2003-09-18 at 15:48, Rich Shepard wrote:
> On Thu, 18 Sep 2003, gordon wrote:
>
> > I'm using the book (mwbk) document type, but all bullets (itemize)
> > appear as dashes. What wo
That did it :)
Thanks alot!
gordon
On Thu, 2003-09-18 at 18:54, Juergen Spitzmueller wrote:
> gordon wrote:
> > I'm afraid that doesn't work. All bullets on all levels are dashes.
>
> it works as long as you do not want the "default" buttons. If you want
Hi
Is there anyway to make figure and label captions automatically wrap to
float widths using block/justified alignment (I understand that this can
be set manually). If so, can this be done on a float by float basis?
Thanks in advance
--
gordon <[EMAIL PROTECTED]>
Hi,
I've got a problem that I can't imagine is unique or unsoved, but I couldn't
find an adequate solution in the archives - so could someone help?
All I'm trying to do is start writing a journal article with elsart
(starting with the elsart.lyx template). I have two authors. I want them to
that
suited and tried to save it as a new template. Lyx refused to save it but
did not tell me why.
Any advice about making new templates will be very welcome.
Thanks,
Gordon
Tauranga,
New Zealand.
My thanks for the advice given by several contributors.
I am making progress now.
Gordon.
Tauranga N.Z.
What is the correct way to pronounce 'Lyx' in
a country speaking English?
Thanks,
Gordon
Tauranga N.Z.
ing in the morning up until
the insertion
of the text file.
Gordon Cooper.
4461/lyx_tmpbuf)/filename'
As a user of some three weeks, I would appreciate advice
on where to start looking - have reinstalled from Repository
but no improvement.
Thanks,
Gordon.
On 06/24/2011 11:41 AM, Liviu Andronic wrote:
Make sure that you have texlive installed.
THANK YOU! Re-installing texlive has restored
the PDF. Now to work on learning more.
Gordon
I need to edit an elderly .chm help file and produce it in pdf. The
easiest edit looks to be with Lyx.
Has anyone done this conversion? I have looked in the archive,
with a negative result.
Gordon
Tauranga N.Z.
Thanks for the replies. The file is the help section of
a CAD programme with 400 pages and many graphics.
I can print it directly to pdf but it needs editing, which
would be easier in Lyx, hence the question.
Richard, will look at importing into LO.
Gordon.
% of the time.
Regards,
Gordon.
On 11/14/2015 04:15 AM, Bert Lloyd wrote:
Dear LyX users,
I am attempting to compare two versions of a LyX document using Tools
- Compare. The document is roughly 60,000 characters including spaces,
and my rough estimate is that 5% of the document has been changed
Certainly, will do. Files are a software manual and readily
available.
Gordon.
On 11/15/2015 06:57 AM, Jean-Marc Lasgouttes wrote:
If you come up with an example where Compare fails, and if the files
are not confidential, we'd appreciate to have a copy (at least in
private if th
synchronisation between documents
is lost and Compare thinks that every character has changed.
Regards,
Gordon.
On 11/16/2015 08:35 AM, Liviu Andronic wrote:
What was the interest for this particular Compare? Did you want to
see/edit changes within LyX, or simply to visualize differences
between files. If
g another enumerated line, Compare has created a
new Subsubsection which then automatically renumbered the following
Subsubsections.
Just about to work on more comparisons, will report on any errors later.
Gordon
Tauranga N.Z.
LyX Document
On 11/21/2015 09:01 AM, Jean-Marc Lasgouttes wrote:
Le 20/11/15 20:57, Gordon Cooper a écrit :
Am using Compare right now and have not had a repeat of the
reported problem.
Found a small error, here are the related extracts. Note that the
numbered lines were correctly classed as
Compressed file uploaded, three lyx files and a readme.
Gordon.
http://s000.tinyupload.com/?file_id=08562232551680285966
<http://s000.tinyupload.com/index.php?file_id=08562232551680285966>
On 11/21/2015 08:41 PM, Liviu Andronic wrote:
On Fri, Nov 20, 2015 at 11:34 PM, Gordon Cooper
tions. Sectional page numbers will make life
easier for the editors. Me for one.
Possible?
Gordon
Tauranga
New Zealand.
On 30/03/16 01:08, Maria Gouskova wrote:
Section 17 on page 16 of the fancyhdr manual talks about this.
http://www.ctan.org/pkg/fancyhdr
Thank you Maria, package chappg should
solve my problem.
Gordon.
t will all run.
I can confirm that, happens here too.
Gordon.
Tauranga N.Z.
You are right! Many thanks Michael.
Gordon.
On 27/04/16 01:33, Michael Berger wrote:
Gordon probably forgot to address the list!?
Michael Berger
Forwarded Message
Subject: Re: Question on creating layouts
Date: Tue, 26 Apr 2016 19:27:25 +1200
From: gordon
.
Again thanks,
Gordon
NZ.
a big problem here could be how best use the
existing mail-list archive.
Gordon.
using something like Fetchmail to
make a mail list easier. Perhaps I should look again.
Cheers,
Gordon.
On 10/06/16 08:52, Steve Litt wrote:
On Thu, 9 Jun 2016 16:50:16 +1200
gordon cooper wrote:
On 09/06/16 02:59, Richard Heck wrote:
Alternatively---here's a crazy idea---we could s
We have had reasonable success with Lyx exports to ODF by using
html as an intermediate step, then copy pasting the html into
open document. Although we have not tested bib styles, and
have had some problems with table frames. Numbering and
heading styles are preserved.
Gordon.
On 16/06/16 09:03, Nikola Ivan Leder wrote:
gordon cooper kinect.co.nz> writes:
We have had reasonable success with Lyx exports to ODF by using
html as an intermediate step, then copy pasting the html into
open document. Although we have not tested bib styles, and
have had s
In Lyx 2.2.0, Documents tab, there is the option to view Open Document
(elyxer).
An error? Selecting this certainly does a conversion, the heading says
.odt,
but the converted file does not look like open doc format, and if the
file is saved,
it saves as an html, which is what I would exp
would expect
from an elyxer conversion. "
I wrote the above a few days ago, but do not seem to have triggered
any comment. There is more to it, I see. In that same menu is
the option to view as MS Word - but the file looks like html and saves
as html.
Am I being mislead?
Gordon.
wishes,
Gordon.
N.Z.
Not that this will assist your problem? I'm running the MX15 OS which is
based on Debian Jessie. Use Lyx 2.2 often and have never seen this
behaviour.
Gordon
Tauranga NZ.
ng, they will not return.
Gordon
Tauranga N.Z.
On 03/07/16 17:45, Richard Heck wrote:
On 07/02/2016 10:35 PM, gordon cooper wrote:
Been using Lyx 2.2.0 without any real problems but a small issue
appeared in a Koma article that had been upgraded from 2.1.
Whenever a nesting level was changed, a hyperlink inserted
into a nested list, or
On 04/07/16 03:17, Guillaume Munch wrote:
Le 03/07/2016 04:35, gordon cooper a écrit :
My colleague on
this project commented :
" --a hundred or more red hard return icons in the lyx file that
showed up as "\begin_inset Separator latexpar\end_inset" in
the html (took me over
lication where middle button activates
paste) could be annoying. or else I develop a lighter touch.
Gordon.
On 30/08/16 23:48, CarLaTeX wrote:
Is it easy to use with LyX?
Been using Koma Script for several years with no problems and like
el, we do not use the standard Article/Report/Book.
Gordon.
Richard and Paul,
Thank you for this discussion and the
detailed reporting.
Have been thinking about wrapping, without actually doing anything.
Now I know what to do.
Regards,
Gordon
Tauranga N.Z.
restoring the Menu Bar. This is
the standard way to restore the bar.
Gordon.
rtain that the generation of .eps
never
happened with previous versions of Lyx.
Gordon
Tauranga N.Z.
Adding to my previous comment. Deleted that html, made another and
Lyx created a new list of image files, this time in the html sub folder, in
addition to repeating the grafix subfolder with all the image files in it.
Will contact my co-editor on this, see if it's happening to him too.
G
ged. We have checked the
Lyx dependencies to see if anything in LateX or LiveteX was missing,
but nothing apparent.
Where are we missing something?
Gordon Cooper
MX-Linux Documentation Team.
Tauranga, N.Z.
/
/
On 14/11/16 07:46, Scott Kostyshak wrote:
On Mon, Nov 14, 2016 at 07:43:10AM +1300, gordon cooper wrote:
We are using the converters available from File>Export within Lyx. Something
changed there perhaps?
Many of those converters use external tools. For example when you export
to
On 14/11/16 22:28, Guenter Milde wrote:
On 2016-11-13, gordon cooper wrote:
[-- Type: text/plain, Encoding: 8bit --]
/
Several months ago when we were using lyx 2.1.*, the expression
/LyX Document
"-*rw-r‑‑r‑‑ *newbie users 277 Jan 7 14:42 .asoundrc" exported
correctly to an htm
On 15/11/16 08:41, gordon cooper wrote:
On 14/11/16 22:28, Guenter Milde wrote:
On 2016-11-13, gordon cooper wrote:
[-- Type: text/plain, Encoding: 8bit --]
/
Several months ago when we were using lyx 2.1.*, the expression
/LyX Document
"-*rw-r‑‑r‑‑ *newbie users 277 Jan 7 14:42 .aso
This problem has been fixed. A work-around from my colleague was
simple. The function with a double dash that could not be converted
to html is now displayed as an image copied from the screen.
Thanks to those who offered advice.
Gordon.
folder for them all.
Gordon.
On 23/11/16 04:30, Bernt Lie wrote:
From: Anders Ekberg [mailto:a...@me.com]
Sent: tirsdag 22. november 2016 16.21
To: Bernt Lie
Cc: lyx-users@lists.lyx.org
Subject: Re: LyX 2.2 -- logo in headers?
On 2016Nov22, at 16:16, Bernt Lie mailto:bernt@hit.no>
I find Lyx copies in the folder that I am using for the related Lyx file.
Gordon.
On 05/12/16 12:19, racoon wrote:
Hi,
Does someone know where LyX puts backups of unsaved documents?
Best,
Daniel
. Therefore I use a separate folder for
each version of the
project, and find that Lyx will save a copy of the present workfile into
that folder, if I
forget to do a save myself.
Gordon.
On 05/12/16 21:00, racoon wrote:
On 05.12.2016 01:40, gordon cooper wrote:
On 05/12/16 12:19, racoon
,
Gordon.
rt
of time for experimenting with dependencies for PDF copies, so with
plenty of room available
on the HD, I actually installed everything from texlive that might have
been relevant.
Gordon.
Joel,
'baed' did appear in the Urban Dictionary a few years ago. It was explained
as the mis-pronunication of the word 'bad'. Surprised that it seems be
in a
spell-checker.
Gordon.
The question was about baed, not bead.
G.
On 07/01/17 20:08, Michael Berger wrote:
On 01/06/2017 09:08 PM, Joel Kulesza wrote:
Colleagues,
Does anyone know what "baed" means? With all lower case, I cannot
find any reasonable definition.
However, the spell checker (dialog and interactiv
character, a beginning itemize dot, like this :
• http://www.debian.org/doc/FAQ/ch-pkgtools.en.html
Removing the dot fixed the problem, but an hour or two wasted looking
for it.
Gordon.
with html copies. Regardless of the preferences setting, html copies
always show deletions in red and insertions in dark blue - which is
unfortunately close to black. Are there settings/adjustments available
in the html converter?
Gordon
Tauranga N.Z.
rchive, but no clues found.
A fix and or suggestions would be very welcome.
Using lyx 2.2.2, on MX16-Linux. Change bar works perfectly in the Lyx
difference
files.
Gordon
Tauranga N.Z.
images and hyperlinks.
So, my next step will be to isolate the fault, using the old slow method
of halving, testing, then halving again etc., and hoping I can see it in
the source pane. Will report progress.
Many thanks,
Gordon.
On 24/01/17 22:58, Guenter Milde wrote:
Dear Gordon,
On 2017-01-24
You are not alone Wolfgang, I have been getting them too.
Gordon.
Had not thought about a New Window, I have been saving
the file with slightly different name, so that lyx does not
recognise it for a second tab. Guess that one needs plenty
of disk room for this - I do have that on the elderly desktop.
Gordon.
On 25/01/17 11:59, Richard Heck wrote:
On 01
he Change bar errors.
Will continue
working on the problem as time permits and report progress.
Gordon.
On 25/01/17 08:28, gordon cooper wrote:
Dear Gunter,
You have given me a guide as to the possible
error.
Providing a minimum example is difficult as there is no error r
Will,
You might be able to achieve this in Tools>Preferences>Colors,
changing them to black.
Did something similar by regarding the changes as being from another
author. May take a bit of trial and error.
Gordon.
Tauranga NZ.
On 01/02/17 07:42, Will Parsons wrote:
I
tex-live full certainly does have everything, including many 'other
language'
packages that you may not need. If disk space is a problem then it may be
better to work through the associated repository and delete the unwanted.
Gordon.
On 15/02/17 03:24, Maria Gouskova wrote:
Steve,
Try :Tools>Preferences>Editing>Cursor Width
increase the pixels.
Gordon.
On 29/03/17 11:37, Steve Litt wrote:
Hi all,
On my copy of LyX, (2.2.2), the mouse pointer is a text pointer and is
so thin and so small that I have to click or drag it to know where it
is. Can&#
No, forget that suggestion, it only changes the cursor
Sorry,
Gordon.
On 29/03/17 14:08, gordon cooper wrote:
Steve,
Try :Tools>Preferences>Editing>Cursor Width
increase the pixels.
Gordon.
On 29/03/17 11:37, Steve Litt wrote:
Hi all,
On my copy of LyX, (2.2.2), the mous
Hello Scott,
Am running Lyx on Mx-Linux Version MX16.
Most of my Lyx tasks are proofreading/editing of documents
written by others, so leave Lyx on Default.
Regards,
Gordon.
age Delphi but have completely abandoned
working in Windows®, looked at Lazarus - and am still looking at it very
slowly.
Regards,
Gordon.
On 03/06/17 01:23, Rich Shepard wrote:
A web search tells me there are a few LaTeX templates for business
cards.
If you have experience using any of th
?
Thanks in advance
--
|\ /---\|
| -/ o \ \\/ __/
| -\ \__-/__|__/
|/ \---/ _/_\__/
|_ |_ ___/
~~~
Gordon Wells
Department of Biochemistry
University of
ks in advance
--
|\ /---\|
| -/ o \ \\/ __/
| -\ \__-/__|__/
|/ \---/ _/_\__/
|_ |_ ___/
~~~
Gordon Wells
Department of Biochemistry
University of Pretoria
like to know is if there is a function that
returns table/figure widths like \linewidth does for lines?
Thanks
Gordon
On Mon, 2003-10-06 at 15:11, Herbert Voß wrote:
On Mon, 2003-10-06 at 15:11, Herbert Voß wrote:
> Gordon Wells schrieb:
> >
> > I know I've posted this befo
o \ \\/ __/
| -\ \__-/__|__/
|/ \---/ _/_\__/
|_ |_ ___/
~~~
Gordon Wells
Department of Biochemistry
University of Pretoria
Sorry, forgot to mention I'm using the mwbk class. Book class does not
seem to do this
On Wed, 2003-10-08 at 22:12, Gordon Wells wrote:
> I get the following error whenever I try to use natbib in my current
> document (It does not happen if I start a clean document though):
>
Semi fixed now
Included the following in the preamble, then run C-t twice:
\renewcommand{\bibsection}{\chapter*{\bibname}}
Kindly supplied by M.W.
On Thu, 2003-10-09 at 09:39, Gordon Wells wrote:
> Sorry, forgot to mention I'm using the mwbk class. Book class does not
> seem
s the sections, when what I need is for them
> not to be underlined in the TOC.
>
> For reference I am using the report class in lyx 1.3.3.
>
> Any help would be much appreciated.
>
> Brad
Gordon Wells
Department of Biochemistry
University of Pretoria
On Thursday, 16 October 2003 09:00, Gordon Wells wrote:
> Hi
>
> Can help with some of this.
>
> After inserting the toc try these erts:
> \renewcommand\thepage{\arabic{page}}
Sorry should be: renewcommand\thepage{\roman{page}}
> \setcounter{page}{4}
>
> So far I
ely on. Is there a way
to recompile this to "make it fit in" with the other apps?
Gordon
--
|\ /---\|
I've tried to compile lyx a few times now. I now know the culprit is ./configure
After running it my root device becomes read-only. The first symptom is error
messages reporting /dev/null is read-only. When I reboot I can do nothing,
because now the entire root file system is read-only.
PLEASE H
Another way, and I will admit to not having tested it,
could be to produce a PDF from the Lyx file, then convert
the PDF to Word, which can be read by Libre Office, tidied
up, then saved as an odt.
Gordon Cooper
the whole
document experience after "line by line" changes?
I will experiment when time and fear permit!
Question: Is there (maybe) a LyX package for my combination: LyX version is
2.0.5.1; Mac OSX 10.7.5.
Thanks; Gordon
On 22/05/2013, at 8:29 AM, Scott Kostyshak wrote:
> On Tue,
ur solution beautiful too.
Thank you both, again; Gordon
On 22/05/2013, at 8:39 AM, Uwe Stöhr wrote:
> Am 22.05.2013 00:05, schrieb Gordon Watson:
>
> > Unlike the LyX Tutorial, my footnotes are not numbering.
>
> You use many preamble code. Do you know what this does? If not, ple
t I'm thinking it may be best to change your
lovely pink hyperlinks to blue!
5. If you ever have other ideas for improvements, I'll be happy to learn of
them, put them under the bonnet, drive them.
6. Think of me more as LyX's top F1 driver -- not just another mechanic. :)
Cheers; Gordo
1. I cannot get that to work.
2. Also: How would I change your "pink" to "HOTTER PINK"?
Thanks; Gordon
On 22/05/2013, at 9:23 AM, Uwe Stöhr wrote:
> Am 22.05.2013 01:20, schrieb Gordon Watson:
>
>> 4. it so far looks great -- except I'm thinking it may b
ith then? That is: Is pink the standard output
expected in PDFs of good-quality technical documents?
I thought that I'd seen most with BLUE ?
Tks again; Gordon
On 23/05/2013, at 9:53 AM, Uwe Stöhr wrote:
> Am 23.05.2013 01:47, schrieb Gordon Watson:
>
>> 1. I cannot get that
mouse?
Gordon
Tauranga N.Z.
umentation team as a "concerned
beginner/user."
Thank you; Gordon -- MacOSX 10.7.5, LyX 2.0.5.1
Thank you, Ray; that's the sort of clue/hint that I find very helpful a… it's
the sort of clever slickness that a beginner hopes for, ahead, on the path to
high-level competence.
Best regards; Gordon
On 24/05/2013, at 6:19 PM, Ray Rashif wrote:
> On 24 May 2013 05:00, Gordon
was stored.
The routine report has been sent to Apple. Is there another report that anyone
wants to see? If so, just tell me what to do.
PS: I'm loving LyX!
Thank you; Gordon -- MacOSX 10.7.5, LyX 2.0.5.1
On 02/09/13 17:02, Alan L Tyree wrote:
You can become productive with LyX*very*
quickly without knowing anything about LaTeX.
Agreed! I wish that Lyx had been available back in the
1960's when we had to produce a heap of technical training
manuals - very quickly.
Gordon
Tauranga N.Z.
guidance,
but must have blinked at the wrong time.
Gordon
New Zealand.
Is there a simple answer to the typesetting widow & orphan
problem in Lyx/latex? I see that there are various suggestions
offered in the manuals but they all seem to result in the need
for a bit of text adjustment (fiddling) as the final step before
printing.
Gordon
Tauranga.
for the information.
Gordon Cooper
On 11/09/13 00:57, Richard Heck wrote:
Generally, it really is best to leave this until everything else
is done, and then make adjustments if necessary.
a module!
Has this problem been fixed in the latest LyX?
That is, for my Mac with OSX 10.7.5; LyX 2.0.6.
Thanks; Gordon
How to have numbered Sections formatted [1], [2], etc., instead of standard 1,
2, etc.?
Reason: In text, I cross-reference Equations thus -- (1), (2) -- because
that's the way equations are numbered..
So, in text, I'd like to cross-reference Sections thus -- [1], [2], etc.
Thanks; Gordon
Marcelo,
Remove the stop after org
and send your email to
lyx-es-subscribe@;ists.lyx.org
That works properly,
Gordon
Tauranga N.Z.
On 05/06/2014 02:44 AM, Marcelo Acuña wrote:
I can't send a mail to the address lyx-es-subscr...@lists.lyx.org.
Is rejected for yahoo.
Typo in first send sorry.
Marcelo,
Remove the stop after org
and send your email to
lyx-es-subscr...@lists.lyx.org
That works properly,
Gordon
Tauranga N.Z.
On 05/06/2014 02:44 AM, Marcelo Acuña wrote:
I can't send a mail to the address lyx-es-subscr...@lists.ly
function in the texlive package?
Using Lyx 2.1.2 in MX Linux.
Gordon
Tauranga N.Z.
_down_ the page into another line.
Have read the Help files several times and can not see what it causing
this.
Thanks,
Gordon
Tauranga N.Z.
ly
had the wrong combinations. Will look forward to Lyx 2.1.3
Gordon.
On 18/01/15 18:31, Scott Kostyshak wrote:
>
> Hi Gordon,
>
> Are you able to give a reproducible example? For example, if you can
> give a small .lyx file and give exactly the behavior (you mention
> "previously"), and the behavior you see now, perhaps with screen
&
Cured thank you. Do not know how I overlooked that setting,
perhaps new spectacles are needed.
Cheers,
Gordon.
On 18/01/15 22:47, Jürgen Spitzmüller wrote:
> For your purpose, the tcolorbox package might be more suitable. See
> http://www.ctan.org/pkg/tcolorbox. Forthcoming LyX 2.1.3 will introduce
> support for this package.
May I ask when Lyx 2.1.3 will arrive?
Gordon.
1 - 100 of 130 matches
Mail list logo
