Hi Bala,
@@ -709,6 +722,8 @@ void emulate_vsx_load(struct instruction_op *op, union
vsx_reg *reg,
reg->d[0] = reg->d[1] = 0;
switch (op->element_size) {
+ case 32:
+ /* [p]lxvp[x] or [p]stxvp[x] */
This function does not emulate stvxp
case 16:
There are some devices in which a hypervisor may only allow 1 DMA window
to exist at a time, and in those cases, a DDW is never created to them,
since the default DMA window keeps using this resource.
LoPAR recommends this procedure:
1. Remove the default DMA window,
2. Query for which configs the
Create defines to help handling ibm,ddw-applicable values, avoiding
confusion about the index of given operations.
Signed-off-by: Leonardo Bras
---
arch/powerpc/platforms/pseries/iommu.c | 43 --
1 file changed, 26 insertions(+), 17 deletions(-)
diff --git a/arch/powerpc
>From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can make the number of
outputs from "ibm,query-pe-dma-windows" go from 5 to 6.
This change of output size is meant to expand the address size of
largest_available_block PE TCE from 32-bit to 64-bit, which ends up
shifting page_size and migration_
Move the window-removing part of remove_ddw into a new function
(remove_dma_window), so it can be used to remove other DMA windows.
It's useful for removing DMA windows that don't create DIRECT64_PROPNAME
property, like the default DMA window from the device, which uses
"ibm,dma-window".
Signed-o
On LoPAR "DMA Window Manipulation Calls", it's recommended to remove the
default DMA window for the device, before attempting to configure a DDW,
in order to make the maximum resources available for the next DDW to be
created.
This is a requirement for using DDW on devices in which hypervisor
allo
Move the part of iommu_table_free() that does struct iommu_table cleaning
into iommu_table_clean, so we can invoke it separately.
This new function is useful for cleaning struct iommu_table before
initializing it again with a new DMA window, without having it freed and
allocated again.
Signed-off
As of today, if the biggest DDW that can be created can't map the whole
partition, it's creation is skipped and the default DMA window
"ibm,dma-window" is used instead.
Usually this DDW is bigger than the default DMA window, and it performs
better, so it would be nice to use it instead.
The DDW c
A previous change introduced the usage of DDW as a bigger indirect DMA
mapping when the DDW available size does not map the whole partition.
As most of the code that manipulates direct mappings was reused for
indirect mappings, it's necessary to rename all names and debug/info
messages to reflect
tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git
merge
branch HEAD: 58a4eb09c4aebaaffa8b4517c71543a41539c096 Automatic merge of
'master', 'next' and 'fixes' (2020-07-15 23:12)
elapsed time: 1031m
configs tested: 94
configs skipped: 4
The following configs have b
From: Benjamin Herrenschmidt
> Sent: 15 July 2020 23:49
> On Wed, 2020-07-15 at 17:12 -0500, Bjorn Helgaas wrote:
> > > I've 'played' with PCIe error handling - without much success.
> > > What might be useful is for a driver that has just read ~0u to
> > > be able to ask 'has there been an error s
On Wed, Jul 15, 2020 at 07:52:01AM -0400, Nayna Jain wrote:
> The device-tree property to check secure and trusted boot state is
> different for guests(pseries) compared to baremetal(powernv).
>
> This patch updates the existing is_ppc_secureboot_enabled() and
> is_ppc_trustedboot_enabled() functi
From: Bjorn Helgaas
> Sent: 15 July 2020 23:02
>
> On Wed, Jul 15, 2020 at 02:24:21PM +, David Laight wrote:
> > From: Arnd Bergmann
> > > Sent: 15 July 2020 07:47
> > > On Wed, Jul 15, 2020 at 1:46 AM Bjorn Helgaas wrote:
> > >
> > > So something like:
> > > >
> > > > void pci_read_config
An instruction accessing a mmio address, generates a HDSI fault. This fault is
appropriately handled by the Hypervisor. However in the case of secureVMs, the
fault is delivered to the ultravisor.
Unfortunately the Ultravisor has no correct-way to fetch the faulting
instruction. The PEF architect
On Wed, Jul 15, 2020 at 10:18:20PM -0700, Andy Lutomirski wrote:
> > On Jul 15, 2020, at 9:15 PM, Nicholas Piggin wrote:
> > CPU0 CPU1
> > 1. user stuff
> > a. membarrier() 2. enter kernel
> > b. read rq->curr 3. rq->curr switched to kt
On Wed, Jul 15, 2020 at 06:12:25PM +0530, Aneesh Kumar K.V wrote:
> Anton Blanchard writes:
>
> > Booting with a 4GB LMB size causes us to panic:
> >
> > qemu-system-ppc64: OS terminated: OS panic:
> > Memory block size not suitable: 0x0
> >
> > Fix pseries_memory_block_size() to handle 6
Excerpts from Peter Zijlstra's message of July 16, 2020 6:50 pm:
> On Wed, Jul 15, 2020 at 10:18:20PM -0700, Andy Lutomirski wrote:
>> > On Jul 15, 2020, at 9:15 PM, Nicholas Piggin wrote:
>
>> > CPU0 CPU1
>> > 1. user stuff
>> > a. membarrier()
From: Chen Huang
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Chen Huang
---
arch/powerpc/kvm/book3s_xive_native.c | 12 +---
arch/powerpc/mm/ptdump/bats.c | 24 +++-
arch/powerpc/mm/ptdump/hashpagetable.c | 12 +---
arch/po
On Thu, Jul 16, 2020 at 08:03:36PM +1000, Nicholas Piggin wrote:
> Excerpts from Peter Zijlstra's message of July 16, 2020 6:50 pm:
> > On Wed, Jul 15, 2020 at 10:18:20PM -0700, Andy Lutomirski wrote:
> >> > On Jul 15, 2020, at 9:15 PM, Nicholas Piggin wrote:
> >> But I’m wondering if all this de
Based on recent bugs found in the pkey infrastructure, this
improves the test for execute-disabled pkeys and adds a new
test for detecting inconsistencies with the pkey reported by
the signal information upon getting a fault.
Sandipan Das (5):
selftests/powerpc: Move pkey helpers to headers
se
This moves all the pkey-related helpers to a new header
file and also a helper to print error messages in signal
handlers to the existing utils header file.
Signed-off-by: Sandipan Das
---
.../testing/selftests/powerpc/include/pkeys.h | 108 ++
.../testing/selftests/powerpc/inclu
This adds some new pkey-related helper to print
access rights of a pkey in the "rwx" format and
to generate different valid combinations of pkey
rights starting from a given combination.
Signed-off-by: Sandipan Das
---
.../testing/selftests/powerpc/include/pkeys.h | 28 +++
.../selft
Commit 192b6a7805989 ("powerpc/book3s64/pkeys: Fix
pkey_access_permitted() for execute disable pkey") fixed a
bug that caused repetitive faults for pkeys with no execute
rights alongside some combination of read and write rights.
This removes the last two cases of the test, which check
the behavio
This adds a helper similar to FAIL_IF() which lets a
program exit with code 1 (to indicate failure) when
the given condition is true.
Signed-off-by: Sandipan Das
---
tools/testing/selftests/powerpc/include/utils.h | 9 +
1 file changed, 9 insertions(+)
diff --git a/tools/testing/selftes
Commit c46241a370a61 ("powerpc/pkeys: Check vma before
returning key fault error to the user") fixes a bug which
causes the kernel to set the wrong pkey in siginfo when a
pkey fault occurs after two competing threads that have
allocated different pkeys, one fully permissive and the
other restrictiv
The per_event_excludes test wants to run on Power8 or later. But
currently it checks that AT_BASE_PLATFORM *equals* power8, which means
it only runs on Power8.
Fix it to check for the ISA 2.07 feature, which will be set on Power8
and later CPUs.
Signed-off-by: Michael Ellerman
---
tools/testing
On Sun, 12 Jul 2020 18:50:47 +0530, Aneesh Kumar K.V wrote:
> Even if the IAMR value deny the execute access, current kernel return true
> w.r.t pkey_access_permitted() for execute permission check if the AMR
> read pkey bit is cleared.
>
> This results in repeated page fault loop with a test like
On Fri, 10 Jul 2020 16:47:19 -0700, Haren Myneni wrote:
> P9 DD2 NX workbook (Table 4-36) says DMA controller uses CC=5
> internally for translation fault handling. NX reserves CC=250 for
> OS to notify user space when NX encounters address translation
> failure on the request buffer. Not an issue
On Fri, 19 Jun 2020 12:31:13 +0530, Satheesh Rajendran wrote:
> Early secure guest boot hits the below crash while booting with
> vcpus numbers aligned with page boundary for PAGE size of 64k
> and LPPACA size of 1k i.e 64, 128 etc, due to the BUG_ON assert
> for shared_lppaca_total_size equal to s
On Wed, 1 Jul 2020 12:52:28 +0530, Aneesh Kumar K.V wrote:
> This patch series enables the usage os new pmem flush and sync instructions
> on POWER
> architecture. POWER10 introduces two new variants of dcbf instructions
> (dcbstps and dcbfps)
> that can be used to write modified locations back t
On Mon, 13 Jul 2020 18:36:01 +1000, Anton Blanchard wrote:
> Generic code has a wrapper to implement cputime_to_nsecs() on top of
> cputime_to_usecs() but we can easily return the full nanosecond
> resolution directly.
Applied to powerpc/next.
[1/1] powerpc: Add cputime_to_nsecs()
https://g
On Thu, 16 Jul 2020 09:37:04 +1000, Anton Blanchard wrote:
> The code in vdso_cpu_init that exposes the cpu and numa node to
> userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means
> that any kernel running on a box with more than 4096 threads (NR_CPUS
> advertises a limit of of 8
On Tue, 30 Jun 2020 10:02:18 +1000, Anton Blanchard wrote:
> I'm seeing RCU warnings when exiting xmon. xmon resets the NMI watchdog,
> but does nothing with the RCU stall or soft lockup watchdogs. Add a
> helper function that handles all three.
Applied to powerpc/next.
[1/1] powerpc/xmon: Reset
On Wed, 15 Jul 2020 10:08:20 +1000, Anton Blanchard wrote:
> Booting with a 4GB LMB size causes us to panic:
>
> qemu-system-ppc64: OS terminated: OS panic:
> Memory block size not suitable: 0x0
>
> Fix pseries_memory_block_size() to handle 64 bit LMBs.
Applied to powerpc/next.
[1/1] ps
On Wed, 24 Jun 2020 17:00:32 +0530, Balamuruhan S wrote:
> ppc-opcode.h have base instruction encoding wrapped with stringify_in_c()
> for raw encoding to have compatibility. But there are redundant macros for
> base instruction encodings in bpf, instruction emulation test infrastructure
> and powe
On Mon, 6 Jul 2020 15:22:46 +0200, Arnd Bergmann wrote:
> The kernel test robot pointed out a slightly different error message
> after recent commit 5456ffdee666 ("powerpc/spufs: simplify spufs core
> dumping") to spufs for a configuration that never worked:
>
>powerpc64-linux-ld: arch/powerpc
On Fri, 3 Jul 2020 11:06:05 +0530, Bharata B Rao wrote:
> Hypervisor may choose not to enable Guest Translation Shootdown Enable
> (GTSE) option for the guest. When GTSE isn't ON, the guest OS isn't
> permitted to use instructions like tblie and tlbsync directly, but is
> expected to make hyperviso
On Fri, 1 May 2020 21:44:54 -0700, Bin Meng wrote:
> Drop CONFIG_MTD_M25P80 that was removed in
> commit b35b9a10362d ("mtd: spi-nor: Move m25p80 code in spi-nor.c")
Applied to powerpc/next.
[1/1] powerpc: Drop CONFIG_MTD_M25P80 in 85xx-hw.config
https://git.kernel.org/powerpc/c/76f09371bc0
On Tue, 7 Jul 2020 12:33:35 + (UTC), Christophe Leroy wrote:
> Since commit ("1bd79336a426 powerpc: Fix various
> syscall/signal/swapcontext bugs"), getting save_general_regs() called
> without FULL_REGS() is very unlikely and generates a warning.
>
> The 32-bit version of save_general_regs()
On Tue, 28 Apr 2020 13:16:46 + (UTC), Christophe Leroy wrote:
> This is the seventh version of a series to switch powerpc VDSO to
> generic C implementation.
>
> Main changes since v7 are:
> - Added gettime64 on PPC32
>
> This series applies on today's powerpc/merge branch.
>
> [...]
Patch
On Thu, 2 Jul 2020 14:09:21 + (UTC), Christophe Leroy wrote:
> Documentation wrongly tells that book3s/32 CPU have hash MMU.
>
> 603 and e300 core only have software loaded TLB.
>
> 755, 7450 family and e600 core have both hash MMU and software loaded
> TLB. This can be selected by setting a
On Thu, 2 Jul 2020 11:52:02 + (UTC), Christophe Leroy wrote:
> This reverts commit d2a91cef9bbdeb87b7449fdab1a6be6000930210.
>
> This commit moved too much work in kasan_init(). The allocation
> of shadow pages has to be moved for the reason explained in that
> patch, but the allocation of pag
On Fri, 26 Jun 2020 13:47:37 -0300, Desnes A. Nunes do Rosario wrote:
> An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
> formed when count_pmc() is used to reset PMCs on a few selftests. This
> extra pmc_count can occasionally invalidate results, such as the ones from
> c
On Tue, 7 Jul 2020 18:32:25 + (UTC), Christophe Leroy wrote:
> Instead of doing a __get_user() from the first and last location
> into a tmp var which won't be used, use fault_in_pages_readable()
Applied to powerpc/next.
[1/1] powerpc/signal64: Don't opencode page prefaulting
https://gi
On Fri, 19 Jun 2020 16:04:39 +0200, Frederic Barrat wrote:
> Some opencapi FPGA images allow to control if the FPGA should be reloaded
> on the next adapter reset. If it is supported, the image specifies it
> through a Vendor Specific DVSEC in the config space of function 0.
Applied to powerpc/nex
On Mon, 13 Jul 2020 19:55:06 +0200, Alexander A. Klimov wrote:
> Rationale:
> Reduces attack surface on kernel devs opening the links for MITM
> as HTTPS traffic is much harder to manipulate.
>
> Deterministic algorithm:
> For each file:
> If not .svg:
> For each line:
> If doesn't con
On Mon, 13 Jul 2020 21:26:56 +0200, Alexander A. Klimov wrote:
> Rationale:
> Reduces attack surface on kernel devs opening the links for MITM
> as HTTPS traffic is much harder to manipulate.
>
> Deterministic algorithm:
> For each file:
> If not .svg:
> For each line:
> If doesn't con
On Mon, 6 Jul 2020 00:32:58 -0500, Abhishek Goel wrote:
> Commit 1961acad2f88559c2cdd2ef67c58c3627f1f6e54 removes usage of
> function "validate_dt_prop_sizes". This patch removes this unused
> function.
Applied to powerpc/next.
[1/1] cpuidle/powernv : Remove dead code block
https://git.kern
On Thu, 9 Jul 2020 10:48:34 +0530, Kajol Jain wrote:
> This patchset add cpu hotplug support for hv_24x7 driver by adding
> online/offline cpu hotplug function. It also add sysfs file
> "cpumask" to expose current online cpu that can be used for
> hv_24x7 event count.
>
> Changelog:
> v4 -> v5
> -
On Tue, 23 Jun 2020 20:59:20 -0700, Nathan Chancellor wrote:
> Clang warns:
>
> arch/powerpc/boot/main.c:107:18: warning: array comparison always
> evaluates to a constant [-Wtautological-compare]
> if (_initrd_end > _initrd_start) {
> ^
> arch/powerpc/boot/main.c:1
On Mon, 13 Jul 2020 20:16:23 +0530, Madhavan Srinivasan wrote:
> IMC trace-mode record has MSR[HV PR] bits added in the third DW.
> These bits can be used to set the cpumode for the instruction pointer
> captured in each sample.
>
> Add support in kernel to use these bits to set the cpumode for
>
On Tue, 23 Jun 2020 23:03:20 +1000, Michael Ellerman wrote:
> With CONFIG_OF_ALL_DTBS=y, as set by eg. allmodconfig, we see lots of
> warnings about our dts files, such as:
>
> arch/powerpc/boot/dts/glacier.dts:492.26-532.5:
> Warning (pci_bridge): /plb/pciex@d: node name is not "pci"
On Fri, 12 Jun 2020 00:12:20 -0500, Nathan Lynch wrote:
> Two major parts to this series:
>
> 1. Removal of the extended cede offline mode for CPUs as well as the
>partition suspend code which accommodates it by temporarily
>onlining all CPUs prior to suspending the LPAR. This solves some
On Mon, 11 May 2020 20:19:52 +1000, Nicholas Piggin wrote:
> Returning from an interrupt or syscall to a signal handler currently
> begins execution directly at the handler's entry point, with LR set to
> the address of the sigreturn trampoline. When the signal handler
> function returns, it runs t
On Tue, 9 Jun 2020 17:06:03 +1000, Nicholas Piggin wrote:
> This series allows the link stack to be flushed with the speical
> bcctr 2,0,0 flush instruction that also flushes the count cache if
> the processor supports it.
>
> Firmware does not support this at the moment, but I've tested it in
> s
On Thu, 4 Jun 2020 18:26:07 +0530, Sandipan Das wrote:
> This fixes the way the Authority Mask Register (AMR) is updated
> by the existing pkey tests and adds a new test to verify the
> functionality of execute-disabled pkeys.
>
> Previous versions can be found at:
> v2:
> https://lore.kernel.org
On Wed, 15 Jul 2020 07:52:01 -0400, Nayna Jain wrote:
> The device-tree property to check secure and trusted boot state is
> different for guests(pseries) compared to baremetal(powernv).
>
> This patch updates the existing is_ppc_secureboot_enabled() and
> is_ppc_trustedboot_enabled() functions to
On Sun, 5 Jul 2020 23:35:56 +1000, Oliver O'Halloran wrote:
> The kernel test robot noticed these are non-static which causes Clang to
> print some warnings. These are called via ppc_md function pointers so
> there's no need for them to be non-static.
Applied to powerpc/next.
[1/2] powerpc/powern
On Wed, 24 Jun 2020 09:41:37 +1000, Nicholas Piggin wrote:
> The TM test in restore_math added by commit dc16b553c949e ("powerpc:
> Always restore FPU/VEC/VSX if hardware transactional memory in use") is
> no longer necessary after commit a8318c13e79ba ("powerpc/tm: Fix
> restoring FP/VMX facility
On Tue, 30 Jun 2020 08:50:44 +1000, Sam Bobroff wrote:
> I'm sorry to say I can no longer maintain this position.
Applied to powerpc/next.
[1/1] MAINTAINERS: Remove self from powerpc EEH
https://git.kernel.org/powerpc/c/a984c1f2e49225b40f1d0d20d383ec27d4d0
cheers
On Mon, 13 Jul 2020 10:54:35 +0530, Sourabh Jain wrote:
> When we enter into fadump crash path via system reset we fail to update
> the pstore.
>
> On the system reset path we first update the pstore then we go for fadump
> crash. But the problem here is when all the CPUs try to get the pstore
> l
On Wed, 15 Jul 2020 10:50:40 +0800, YueHaibing wrote:
> commit e27e0a94651e ("powerpc/xive: Remove xive_kexec_teardown_cpu()")
> left behind this, remove it.
Applied to powerpc/next.
[1/1] powerpc/xive: Remove unused inline function xive_kexec_teardown_cpu()
https://git.kernel.org/powerpc/c
On Tue, 14 Jul 2020 22:24:24 +0800, Wei Yongjun wrote:
> The sparse tool complains as follows:
>
> drivers/cpuidle/cpuidle-pseries.c:25:23: warning:
> symbol 'pseries_idle_driver' was not declared. Should it be static?
>
> 'pseries_idle_driver' is not used outside of this file, so marks
> it sta
On Mon, 29 Jun 2020 16:07:00 +0530, Srikar Dronamraju wrote:
> shared_cpu_list sysfs file is missing in powerpc and shared_cpu_map gives an
> extra newline character.
>
> Before this patchset
> # ls /sys/devices/system/cpu0/cache/index1
> coherency_line_size number_of_sets size ways_of_associat
"Aneesh Kumar K.V" writes:
> This is the next version of the fixes for memory unplug on radix.
> The issues and the fix are described in the actual patches.
I guess this isn't actually causing problems at runtime right now, but I
notice calls to resize_hpt_for_hotplug() from arch_add_memory() and
On 7/16/20 7:00 AM, Paul Mackerras wrote:
On Wed, Jul 15, 2020 at 06:12:25PM +0530, Aneesh Kumar K.V wrote:
Anton Blanchard writes:
Booting with a 4GB LMB size causes us to panic:
qemu-system-ppc64: OS terminated: OS panic:
Memory block size not suitable: 0x0
Fix pseries_memory_bl
On 13/07/2020 04:23, Anshuman Khandual wrote:
This adds new tests validating arch page table helpers for these following
core memory features. These tests create and test specific mapping types at
various page table levels.
1. SPECIAL mapping
2. PROTNONE mapping
3. DEVMAP mapping
4. SOFTDIRTY ma
- On Jul 16, 2020, at 7:00 AM, Peter Zijlstra pet...@infradead.org wrote:
> On Thu, Jul 16, 2020 at 08:03:36PM +1000, Nicholas Piggin wrote:
>> Excerpts from Peter Zijlstra's message of July 16, 2020 6:50 pm:
>> > On Wed, Jul 15, 2020 at 10:18:20PM -0700, Andy Lutomirski wrote:
>> >> > On Jul
- On Jul 16, 2020, at 12:42 AM, Nicholas Piggin npig...@gmail.com wrote:
> I should be more complete here, especially since I was complaining
> about unclear barrier comment :)
>
>
> CPU0 CPU1
> a. user stuff1. user stuff
> b. membarrier() 2. enter
On 7/15/20 8:29 PM, David Miller wrote:
From: Jakub Kicinski
Date: Wed, 15 Jul 2020 17:06:32 -0700
On Wed, 15 Jul 2020 18:51:55 -0500 Thomas Falcon wrote:
free_netdev(netdev);
dev_set_drvdata(&dev->dev, NULL);
+ netdev_info(netdev, "VNIC client device has been successf
On Thu, Jul 16, 2020 at 10:59:58AM -0500, Thomas Falcon wrote:
>
> On 7/15/20 8:29 PM, David Miller wrote:
> > From: Jakub Kicinski
> > Date: Wed, 15 Jul 2020 17:06:32 -0700
> >
> > > On Wed, 15 Jul 2020 18:51:55 -0500 Thomas Falcon wrote:
> > > > free_netdev(netdev);
> > > > dev
- On Jul 16, 2020, at 11:46 AM, Mathieu Desnoyers
mathieu.desnoy...@efficios.com wrote:
> - On Jul 16, 2020, at 12:42 AM, Nicholas Piggin npig...@gmail.com wrote:
>> I should be more complete here, especially since I was complaining
>> about unclear barrier comment :)
>>
>>
>> CPU0
064][ T925] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=256 NUMA PowerNV
[9.339098][ T925] Modules linked in: dm_mirror dm_region_hash dm_log dm_mod
[9.339150][ T925] CPU: 92 PID: 925 Comm: (md-udevd) Not tainted
5.8.0-rc5-next-20200716 #3
[9.339186][ T925] NIP: LR: c00
Hello Prakhar,
Prakhar Srivastava writes:
> On 6/19/20 5:19 PM, Thiago Jung Bauermann wrote:
>>
>> Prakhar Srivastava writes:
>>
>>> Powerpc has support to carry over the IMA measurement logs. Refatoring the
>>> non-architecture specific code out of arch/powerpc and into security/ima.
>>>
>>>
- On Jul 16, 2020, at 12:03 PM, Mathieu Desnoyers
mathieu.desnoy...@efficios.com wrote:
> - On Jul 16, 2020, at 11:46 AM, Mathieu Desnoyers
> mathieu.desnoy...@efficios.com wrote:
>
>> - On Jul 16, 2020, at 12:42 AM, Nicholas Piggin npig...@gmail.com wrote:
>>> I should be more compl
From: Palmer Dabbelt
This primitive has been renamed, but because it was spelled incorrectly in the
first place it must have escaped the fixup patch. As far as I can tell this
logic is still correct: smp_mb__after_spinlock() uses the default smp_mb()
implementation, which is "sync" rather than "
On Thu, 16 Jul 2020 18:07:37 +0200 Michal Suchánek wrote:
> On Thu, Jul 16, 2020 at 10:59:58AM -0500, Thomas Falcon wrote:
> > On 7/15/20 8:29 PM, David Miller wrote:
> > > From: Jakub Kicinski
> > > Date: Wed, 15 Jul 2020 17:06:32 -0700
> > >
> > > > On Wed, 15 Jul 2020 18:51:55 -0500 Thomas
On 16/07/20 7:52 am, Thiago Jung Bauermann wrote:
>
> Hari Bathini writes:
>
>> /**
>> + * get_crash_memory_ranges - Get crash memory ranges. This list includes
>> + * first/crashing kernel's memory regions that
>> + * would be exported via
On 15/07/20 5:19 am, Thiago Jung Bauermann wrote:
>
>
>
>> +/**
>> + * get_mem_rngs_size - Get the allocated size of mrngs based on
>> + * max_nr_ranges and chunk size.
>> + * @mrngs: Memory ranges.
>> + *
>> + * Returns the maximum no. of ranges.
>
> This
On 15/07/20 8:09 am, Thiago Jung Bauermann wrote:
>
> Hari Bathini writes:
>
>> +/**
>> + * __locate_mem_hole_top_down - Looks top down for a large enough memory
>> hole
>> + * in the memory regions between buf_min &
>> buf_max
>> + *
On 15/07/20 9:20 am, Thiago Jung Bauermann wrote:
>
> Hari Bathini writes:
>
>> @@ -534,7 +537,7 @@ static int __init early_init_dt_scan_memory_ppc(unsigned
>> long node,
>> #ifdef CONFIG_PPC_PSERIES
>> if (depth == 1 &&
>> strcmp(uname, "ibm,dynamic-reconfiguration-memory") =
On 16/07/20 4:22 am, Thiago Jung Bauermann wrote:
>
> Hari Bathini writes:
>
>> +/**
>> + * get_node_path - Get the full path of the given node.
>> + * @dn:Node.
>> + * @path: Updated with the full path of the node.
>> + *
>> + * Returns nothing.
>> + */
>> +static voi
On 16/07/20 7:08 am, Thiago Jung Bauermann wrote:
>
> Hari Bathini writes:
>
>> @@ -968,7 +1040,7 @@ int setup_new_fdt_ppc64(const struct kimage *image,
>> void *fdt,
>>
>> /*
>> * Restrict memory usage for kdump kernel by setting up
>> - * usable memory ranges.
>> + * usa
On 16/07/20 5:50 am, Thiago Jung Bauermann wrote:
>
> Hari Bathini writes:
>
>> Right now purgatory implementation is only minimal. But if purgatory
>> code is to be enhanced to copy memory to the backup region and verify
>
> Can't the memcpy be done in asm? We have arch/powerpc/lib/memcpy_6
Hari Bathini writes:
> On 16/07/20 7:52 am, Thiago Jung Bauermann wrote:
>>
>> Hari Bathini writes:
>>
>>> /**
>>> + * get_crash_memory_ranges - Get crash memory ranges. This list includes
>>> + * first/crashing kernel's memory regions that
>>> + *
Hari Bathini writes:
> On 15/07/20 8:09 am, Thiago Jung Bauermann wrote:
>>
>> Hari Bathini writes:
>>
>
>
>
>>> +/**
>>> + * __locate_mem_hole_top_down - Looks top down for a large enough memory
>>> hole
>>> + * in the memory regions between buf_min &
>>> b
Hari Bathini writes:
> On 15/07/20 9:20 am, Thiago Jung Bauermann wrote:
>>
>> Hari Bathini writes:
>>
>>> @@ -534,7 +537,7 @@ static int __init
>>> early_init_dt_scan_memory_ppc(unsigned long node,
>>> #ifdef CONFIG_PPC_PSERIES
>>> if (depth == 1 &&
>>> strcmp(uname, "ibm,dyna
Hari Bathini writes:
> On 16/07/20 4:22 am, Thiago Jung Bauermann wrote:
>>
>> Hari Bathini writes:
>>
>
>
>
>>> +/**
>>> + * get_node_path - Get the full path of the given node.
>>> + * @dn:Node.
>>> + * @path: Updated with the full path of the node.
>>> + *
>>> + * Re
Hari Bathini writes:
> On 16/07/20 7:08 am, Thiago Jung Bauermann wrote:
>>
>> Hari Bathini writes:
>>
>>> @@ -968,7 +1040,7 @@ int setup_new_fdt_ppc64(const struct kimage *image,
>>> void *fdt,
>>>
>>> /*
>>> * Restrict memory usage for kdump kernel by setting up
>>> -* usable m
Hari Bathini writes:
> On 16/07/20 5:50 am, Thiago Jung Bauermann wrote:
>>
>> Hari Bathini writes:
>>
>>> So, add support to relocate purgatory in kexec_file_load system call
>>> by setting up TOC pointer and applying RELA relocations as needed.
>>
>> If we do want to use a C purgatory, Mi
Jarkko Sakkinen a écrit :
Rename module_alloc() to text_alloc() and module_memfree() to
text_memfree(), and move them to kernel/text.c, which is unconditionally
compiled to the kernel proper. This allows kprobes, ftrace and bpf to
allocate space for executable code without requiring to compile
On Thu, 2020-07-16 at 12:38 -0700, Palmer Dabbelt wrote:
> From: Palmer Dabbelt
>
> This primitive has been renamed, but because it was spelled incorrectly in the
> first place it must have escaped the fixup patch. As far as I can tell this
> logic is still correct: smp_mb__after_spinlock() uses
Hi all,
On Thu, 16 Jul 2020 13:27:14 -0400 Qian Cai wrote:
>
> Reverting the whole series fixed random memory corruptions during boot on
> POWER9 PowerNV systems below.
I will revert those commits from linux-next today as well (they revert
cleanly).
--
Cheers,
Stephen Rothwell
pgpknsPCqmZPx.
Hello,
I didn't find an explanation about the 'double the distance' logic in
'git log' or anywhere in the kernel docs:
(arch/powerpc/mm/numa.c, __node_distance()):
for (i = 0; i < distance_ref_points_depth; i++) {
if (distance_lookup_table[a][i] == distance_lookup_table[b][i])
Excerpts from pet...@infradead.org's message of July 16, 2020 9:00 pm:
> On Thu, Jul 16, 2020 at 08:03:36PM +1000, Nicholas Piggin wrote:
>> Excerpts from Peter Zijlstra's message of July 16, 2020 6:50 pm:
>> > On Wed, Jul 15, 2020 at 10:18:20PM -0700, Andy Lutomirski wrote:
>> >> > On Jul 15, 2020
On Wed, 15 Jul 2020 16:00:09 +0100, Lee Jones wrote:
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: fsl: fsl-asoc-card: Trivial: Fix misspelling of 'exists'
commit: 1b58214113481616b74ee4d196e5b1cb683758ee
All being well t
On Wed, 15 Jul 2020 10:44:47 +0100, Lee Jones wrote:
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: fsl: fsl-asoc-card: Trivial: Fix misspelling of 'exists'
commit: 1b58214113481616b74ee4d196e5b1cb683758ee
All being well t
Christophe Leroy writes:
> Michael Ellerman a écrit :
>
>> Christophe Leroy writes:
>>> Prepare for switching VDSO to generic C implementation in following
>>> patch. Here, we:
>>> - Modify __get_datapage() to take an offset
>>> - Prepare the helpers to call the C VDSO functions
>>> - Prepare t
Excerpts from Mathieu Desnoyers's message of July 17, 2020 4:58 am:
> - On Jul 16, 2020, at 12:03 PM, Mathieu Desnoyers
> mathieu.desnoy...@efficios.com wrote:
>
>> - On Jul 16, 2020, at 11:46 AM, Mathieu Desnoyers
>> mathieu.desnoy...@efficios.com wrote:
>>
>>> - On Jul 16, 2020, at
On Thu, 16 Jul 2020 13:22:00 -0700
Jakub Kicinski wrote:
> On Thu, 16 Jul 2020 18:07:37 +0200 Michal Suchánek wrote:
> > On Thu, Jul 16, 2020 at 10:59:58AM -0500, Thomas Falcon wrote:
> > > On 7/15/20 8:29 PM, David Miller wrote:
> > > > From: Jakub Kicinski
> > > > Date: Wed, 15 Jul 2020
1 - 100 of 135 matches
Mail list logo
