On Fri, 18 Jan 2008 14:06:00 +0530 Kamalesh Babulal <[EMAIL PROTECTED]> wrote:
> Hi Andrew,
>
> Following oops was seen while running kernbench on one of test machine
> (power4+ box). I tried reproducing the oops but was unsuccessful.
> I will try to reproduce the oops with debug info compiled.
Hi Andrew,
Following oops was seen while running kernbench on one of test machine
(power4+ box). I tried reproducing the oops but was unsuccessful.
I will try to reproduce the oops with debug info compiled.
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=32 NUMA pSeries
Modules linked
Andrew Morton writes:
> On Fri, 18 Jan 2008 14:06:00 +0530 Kamalesh Babulal <[EMAIL PROTECTED]> wrote:
>
> > Hi Andrew,
> >
> > Following oops was seen while running kernbench on one of test machine
> > (power4+ box). I tried reproducing the oops but was unsuccessful.
> > I will try to reproduc
mv643xx_eth has an platform modalias file in sysfs.
But the module itself has no alias: line. Autoloading fails
without the alias info in the module.
Signed-off-by: Olaf Hering <[EMAIL PROTECTED]>
---
drivers/net/mv643xx_eth.c |1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/mv643xx_e
Paul Mackerras wrote:
> Andrew Morton writes:
>
>> On Fri, 18 Jan 2008 14:06:00 +0530 Kamalesh Babulal <[EMAIL PROTECTED]>
>> wrote:
>>
>>> Hi Andrew,
>>>
>>> Following oops was seen while running kernbench on one of test machine
>>> (power4+ box). I tried reproducing the oops but was unsuccessfu
Kamalesh Babulal writes:
> >>> NIP: 4570 LR: 0fc42dc0 CTR:
> >>> REGS: c0077b6bf8c0 TRAP: 0300 Not tainted (2.6.24-rc8-mm1-autotest)
> >>> MSR: 80001000 CR: 28022422 XER:
> >>> DAR: c0077b6bfce0, DSISR: 0a00
Actually,
* Michael Ellerman <[EMAIL PROTECTED]> [2008-01-18 16:44:58]:
> On Fri, 2008-01-18 at 16:34 +1100, Michael Ellerman wrote:
> > On Sat, 2007-12-08 at 04:07 +0530, Balbir Singh wrote:
> > > Changelog
> > >
> > > 1. Get rid of the constant 5 (based on comments from
> > >
* Michael Ellerman <[EMAIL PROTECTED]> [2008-01-18 16:55:03]:
> On Sat, 2007-12-08 at 04:07 +0530, Balbir Singh wrote:
> > Here's a dumb simple implementation of fake NUMA nodes for PowerPC. Fake
> > NUMA nodes can be specified using the following command line option
> >
>
> >
> > Comments are
Hello All
The TDM driver just now does not have a proper framework. Probably the
interface cannot be generalised as such. Hence we could not decide
whether it would be right to think of a TDM framework. Infact the
interface this TDM driver(for MPC8323ERDB) supplies may not be usable
for some other
* Kamalesh Babulal <[EMAIL PROTECTED]> [2008-01-18 16:14:00]:
> Paul Mackerras wrote:
> > Kamalesh Babulal writes:
> >
> > NIP: 4570 LR: 0fc42dc0 CTR:
> > REGS: c0077b6bf8c0 TRAP: 0300 Not tainted
> > (2.6.24-rc8-mm1-autotest)
> > MSR:
> + /* "Serial" port/SCC1 */
> + scc1: [EMAIL PROTECTED] {
> + device_type = "serial";
> + compatible = "fsl,mpc8248-scc-uart",
> + "fsl,cpm2-scc-uart";
> +
Kamalesh Babulal writes:
> I tried reproducing the problem and was successful with following trace
> in which the pc is at 0x4570 as the above one
What did you do to trigger it?
> c0004544 :
> c0004544: 71 8a 40 00 andi. r10,r12,16384
> c0004548: 7c 2a 0
* Michael Ellerman <[EMAIL PROTECTED]> [2008-01-18 16:34:53]:
> On Sat, 2007-12-08 at 04:07 +0530, Balbir Singh wrote:
> > Changelog
> >
> > 1. Get rid of the constant 5 (based on comments from
> > [EMAIL PROTECTED])
> > 2. Implement suggestions from Olof Johannson
Paul Mackerras wrote:
> Kamalesh Babulal writes:
>
> NIP: 4570 LR: 0fc42dc0 CTR:
> REGS: c0077b6bf8c0 TRAP: 0300 Not tainted (2.6.24-rc8-mm1-autotest)
> MSR: 80001000 CR: 28022422 XER:
> DAR: c0077b6bfce0, DSISR: 0
On Fri, 2008-01-18 at 17:28 +0530, Aggrwal Poonam wrote:
> Hello All
>
> The TDM driver just now does not have a proper framework. Probably the
> interface cannot be generalised as such. Hence we could not decide
> whether it would be right to think of a TDM framework. Infact the
> interface this
This is on a PowerBook5,8.
In a nutshell, things seem more sluggish in general than with 2.6.23.
But in particular, processes running at nice levels >0 can get most of
the CPU cycles available, slowing down processes running at nice level
0.
I've seen this since .24-rc5 (the first .24-rc I tried
On Jan 18, 2008, at 8:48 AM, Timur Tabi wrote:
> Kumar Gala wrote:
>
>> Can you respin this. It doesn't apply cleanly to my tree.
>
> Ok, but I have a feeling that the merge between alsa-git and powerpc-
> git is going to be ugly.
Really, it would seem ok in that the powerpc stuff is only touc
On Fri, Jan 18, 2008 at 12:07:07PM +0100, Sergej Stepanov wrote:
>
> > + /* "Serial" port/SCC1 */
> > + scc1: [EMAIL PROTECTED] {
> > + device_type = "serial";
> > + compatible = "fsl,mpc8248-scc-uart",
> > +
Paul Mackerras writes:
> Kamalesh Babulal writes:
>
> > I tried reproducing the problem and was successful with following
> trace
> > in which the pc is at 0x4570 as the above one
>
> What did you do to trigger it?
>
> > c0004544 :
> > c0004544: 71 8a 40 00 andi. r10,r
Directly include mpc885ads.h from mpc885ads_setup.c. Now we can get rid
of the arch dependent includes in mpc8xx.h.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/8xx/mpc885ads_setup.c |2 +
include/asm-powerpc/mpc8xx.h | 29 --
m8xx_pic_init is declared in ppc8xx_pic.h but defined nowhere in the ppc
tree. Remove it.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
---
arch/ppc/syslib/ppc8xx_pic.h |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/ppc/syslib/ppc8xx_pic.h b/arch/ppc/syslib/pp
On Fri, 18 Jan 2008, Timur Tabi wrote:
> Update the MPC8610 HPCD files to support the audio driver. Update
> booting-without-of.txt with information on the SSI device.
>
> Signed-off-by: Timur Tabi <[EMAIL PROTECTED]>
> ---
>
> Rebased for Kumar's repo.
>
> Documentation/powerpc/booting-without-
These two patches make the device tree bindings for 5200 platforms more
robust and match closer with the generic names recommended practice.
Please review and comment.
Cheers,
g.
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
___
Linuxppc-d
Kumar Gala wrote:
> Can you respin this. It doesn't apply cleanly to my tree.
Ok, but I have a feeling that the merge between alsa-git and powerpc-git is
going to be ugly.
--
Timur Tabi
Linux kernel developer at Freescale
___
Linuxppc-dev mailing li
On Fri, 2008-01-18 at 18:23 +0100, Mariusz Kozlowski wrote:
> Hello,
>
> > > Do we need `offset' at all?
> >
> > Looks like no.
> >
> > I wonder if there's a good argument for adding a pte_offset_val() which
> > would let us do:
> >
> > pteval = pte_offset_val(pmd, addr);
> >
> > and shrink t
Add PS3 logical performance monitor device support to the
PS3 system-bus and platform device registration routines.
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
---
v2: o Add enum ps3_lpm_tb_type.
o Remove redundant enclosing structure and return proper
error codes from ps3_register_l
From: Takashi Yamamoto <[EMAIL PROTECTED]>
Add repository routines for the PS3 Logical Performance Monitor.
Signed-off-by: Takashi Yamamoto <[EMAIL PROTECTED]>
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
---
v2: o Correct Yamamoto-san's mail addr.
v3: o Change num_pu and pu_id to type u64.
Update ps3_defconfig.
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
---
arch/powerpc/configs/ps3_defconfig | 49 ++---
1 file changed, 35 insertions(+), 14 deletions(-)
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +
Remove the PS3 workaround needed to support sparsemem SPU mappings.
The SPU mappings no longer use sparsemem, so this workaround is no
longer needed.
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/ps3/Kconfig | 11 ---
arch/powerpc/platforms/ps3/mm.c| 1
From: Takashi Yamamoto <[EMAIL PROTECTED]>
Add PS3 logical performance monitor (lpm) device driver.
The PS3's LV1 hypervisor provides a Logical Performance Monitor that
abstracts the Cell processor's performance monitor features for use
by guest operating systems.
Signed-off-by: Takashi Yamamoto
Kumar Gala wrote:
> So I'll ask, what serial input are you waiting for from the boot wrapper?
The bootwrapper has a command line editing prompt. It's fairly
gratuitous in the presence of semi-decent firmware, but it's there
nonetheless.
-Scott
___
Li
Has anyone tried using an external audio clock chip with the MPC5200B?
We've discovered that the on-chip clock dividers aren't flexible
enough and have too much error in the final frequencies. The level of
error is ok for iPod type use but not for playing broadcast music.
192K sample rate is totall
Hi Kumar,
>> Ok now that makes sense, thanks
>
> So I'll ask, what serial input are you waiting for from the boot wrapper?
It's the editor for the kernel command line.
Thanks,
Jochen
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs
On Mon, 14 Jan 2008, Scott Wood wrote:
> The reg property in fsl soc nodes should be removed.
>
> Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
> ---
> arch/powerpc/sysdev/fsl_soc.c | 14 +++---
> 1 files changed, 11 insertions(+), 3 deletions(-)
applied. (dropped the size == 12 check
On Jan 18, 2008, at 2:40 PM, Alan Cox wrote:
> On Fri, 18 Jan 2008 19:47:43 +0100
> Jochen Friedrich <[EMAIL PROTECTED]> wrote:
>
>> Hi Alan,
>>
If a freescale watchdog device node is present, reset the watchdog
while waiting for serial input.
>>>
>>> Why ? We normally rely on user spac
On Fri, 18 Jan 2008, Mel Gorman wrote:
> static void check_for_regular_memory(pg_data_t *pgdat)
> {
> #ifdef CONFIG_HIGHMEM
> enum zone_type zone_type;
>
> for (zone_type = 0; zone_type <= ZONE_NORMAL; zone_type++) {
> struct zone *zone = &pgdat->node_zones[zone_ty
On Fri, Jan 18, 2008 at 04:29:23PM -0600, Kumar Gala wrote:
> On Dec 14, 2007, at 11:23 AM, Dale Farnsworth wrote:
>> On Fri, Dec 14, 2007 at 10:48:58AM -0600, Kumar Gala wrote:
>>> On Nov 22, 2007, at 9:46 AM, Dale Farnsworth wrote:
>>>
Add the ability to build a ppc_85xx kernel to run at a p
On Fri, 18 Jan 2008, Christoph Lameter wrote:
> Memoryless nodes: Set N_NORMAL_MEMORY for a node if we do not support HIGHMEM
If !CONFIG_HIGHMEM then
enum node_states {
#ifdef CONFIG_HIGHMEM
N_HIGH_MEMORY, /* The node has regular or high memory */
#else
N_HIGH_MEMORY = N
On Dec 14, 2007, at 11:23 AM, Dale Farnsworth wrote:
> On Fri, Dec 14, 2007 at 10:48:58AM -0600, Kumar Gala wrote:
>> On Nov 22, 2007, at 9:46 AM, Dale Farnsworth wrote:
>>
>>> Add the ability to build a ppc_85xx kernel to run at a physical
>>> address of 32MB.
>>>
>>> Signed-off-by: Dale Farnswo
thanks, applied 1-4.
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
On 1/18/08, Christoph Lameter <[EMAIL PROTECTED]> wrote:
> Could you try this patch?
>
> Memoryless nodes: Set N_NORMAL_MEMORY for a node if we do not support
> HIGHMEM
>
> It seems that we only scan through zones to set N_NORMAL_MEMORY only if
> CONFIG_HIGHMEM and CONFIG_NUMA are set. We need to s
Could you try this patch?
Memoryless nodes: Set N_NORMAL_MEMORY for a node if we do not support HIGHMEM
It seems that we only scan through zones to set N_NORMAL_MEMORY only if
CONFIG_HIGHMEM and CONFIG_NUMA are set. We need to set N_NORMAL_MEMORY
in the !CONFIG_HIGHMEM case.
Signed-off-by: Chris
On (18/01/08 10:47), Christoph Lameter didst pronounce:
> On Thu, 17 Jan 2008, Olaf Hering wrote:
>
> > early_node_map[1] active PFN ranges
> > 1:0 -> 892928
> > Could not find start_pfn for node 0
>
> Corrupted min_pfn?
>
Doubtful. Node 0 has no memory but it is still being initi
From: Geert Uytterhoeven <[EMAIL PROTECTED]>
Change the PS3 bus_id and dev_id from type unsigned int to u64. These
IDs are 64-bit in the repository, and the special storage notification
device has a device ID of ULONG_MAX.
Signed-off-by: Geert Uytterhoeven <[EMAIL PROTECTED]>
Signed-off-by: Geof
On Fri, 18 Jan 2008 19:47:43 +0100
Jochen Friedrich <[EMAIL PROTECTED]> wrote:
> Hi Alan,
>
> >> If a freescale watchdog device node is present, reset the watchdog
> >> while waiting for serial input.
> >
> > Why ? We normally rely on user space for watchdog management as only the
> > fact user
Looks fine to me.
Grant Likely wrote:
> From: Grant Likely <[EMAIL PROTECTED]>
>
> Update MPC5200 drivers to also look for compatible properties in the
> form "fsl,mpc5200-*" to better conform to open firmware generic names
> recommended practice as published here:
>
> http://www.openfirmware.org/
From: Geert Uytterhoeven <[EMAIL PROTECTED]>
Cleanup coding errors in arch/powerpc/platforms/ps3/repository.c as reported
by sparse and checkpatch.
Signed-off-by: Geert Uytterhoeven <[EMAIL PROTECTED]>
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/ps3/repository.c |
From: Geert Uytterhoeven <[EMAIL PROTECTED]>
Cleanup coding errors in drivers/ps3/ps3-vuart.c as reported by
checkpatch.
Signed-off-by: Geert Uytterhoeven <[EMAIL PROTECTED]>
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
---
drivers/ps3/ps3-vuart.c | 16 +++-
1 files changed, 7 i
From: Geert Uytterhoeven <[EMAIL PROTECTED]>
PS3: Refactor ps3_repository_find_device() to use the existing
ps3_repository_read_bus_id() routine.
Signed-off-by: Geert Uytterhoeven <[EMAIL PROTECTED]>
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/ps3/repository.c |
From: Geert Uytterhoeven <[EMAIL PROTECTED]>
Cleanup coding errors in drivers/ps3/ps3-sys-manager.c as reported
by checkpatch.
Signed-off-by: Geert Uytterhoeven <[EMAIL PROTECTED]>
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
---
drivers/ps3/ps3-sys-manager.c | 14 +++---
1 files ch
From: Geert Uytterhoeven <[EMAIL PROTECTED]>
PS3: Add repository polling loop to work around timing bug
On some firmware versions (e.g. 1.90), the storage device may not show up
in the repository immediately after receiving the notification message.
Add a small polling loop to make sure we don't
Update the MPC8610 HPCD files to support the audio driver. Update
booting-without-of.txt with information on the SSI device.
Signed-off-by: Timur Tabi <[EMAIL PROTECTED]>
---
Rebased for Kumar's repo.
Documentation/powerpc/booting-without-of.txt | 41 ++
arch/powerpc/boot/dts/mpc8610_hpc
At Fri, 18 Jan 2008 09:18:14 -0600,
Kumar Gala wrote:
>
>
> On Jan 18, 2008, at 8:48 AM, Timur Tabi wrote:
>
> > Kumar Gala wrote:
> >
> >> Can you respin this. It doesn't apply cleanly to my tree.
> >
> > Ok, but I have a feeling that the merge between alsa-git and powerpc-
> > git is going t
Jochen Friedrich wrote:
> +void watchdog_poke(void)
> +{
> +if (wdt) {
> +out_be16(&wdt->swsrr, 0x556c);
> +out_be16(&wdt->swsrr, 0xaa39);
> +}
> +}
This should be a function pointer, to allow for other watchdog types.
-Scott
___
On Thu, Jan 17, 2008 at 06:27:46PM -0600, Rune Torgersen wrote:
> BTW. there is a bug in the inbound window size calculation. The mem_log2
> variable sould be the shift value, not 1<< shift. and on the next line the
> window size mask sould be anded with 0x000f_ before or'ed with
> 0xa000_
From: Grant Likely <[EMAIL PROTECTED]>
Prune back Efika fixups to only include changes that are actually required
to get a working system. Most of the drivers can accept the compatible
properties, even if they don't match the what is recommented in the generic
names recommended practice document.
m8xx_cpm_hostalloc is still defined in commproc.c, but no users are left
in the kernel tree. m8xx_cpm_hostfree and m8xx_cpm_hostdump are only
defined in the headers. Remove this dead code.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/commproc.c | 37 --
Hi,
this is a series against paulus for-2.6.25 tree to clean up various 8xx related
stuff.
The series can be pulled from git://git.bocc.de/dbox2.git cleanup.
[POWERPC] Remove unused m8xx_cpm_hostalloc/free/dump()
[POWERPC] Rename m8xx_pic_init to mpc8xx_pics_init
[POWERPC] Remove unneeded and mi
On Fri, Jan 18, Christoph Lameter wrote:
> Could you try this patch?
Does not help, same crash.
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
If a freescale watchdog device node is present, reset the watchdog
while waiting for serial input.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
---
arch/powerpc/boot/Makefile |2 +-
arch/powerpc/boot/cpm-serial.c |6 +++
arch/powerpc/boot/cuboot-8xx.c |1 +
arch/powerpc/boo
On Jan 18, 2008, at 3:56 PM, Jochen Friedrich wrote:
> Hi Kumar,
>
>>> Ok now that makes sense, thanks
>> So I'll ask, what serial input are you waiting for from the boot
>> wrapper?
>
> It's the editor for the kernel command line.
thanks, learn something everyday.
- k
___
Add a definition for the Cell SPRN bookmark register
to asm-powerpc/regs.h
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
Acked-by: Arnd Bergmann <[EMAIL PROTECTED]>
---
include/asm-powerpc/reg.h |1 +
1 file changed, 1 insertion(+)
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/
A general housekeeping change of the PS3 vuart variable
vuart_bus_priv.probe_mutex from semaphore to mutex.
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
---
drivers/ps3/ps3-vuart.c | 22 +++---
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/ps3/ps3-vuart.c
+
From: Geert Uytterhoeven <[EMAIL PROTECTED]>
The storage probe feature of the PS3 hypervisor returns device IDs. Add
the corresponding repository routine ps3_repository_find_device_by_id()
which can be used to retrieve the device info from the repository.
Signed-off-by: Geert Uytterhoeven <[EMAIL
On Fri, Jan 18, 2008 at 10:38:05AM +0100, Olaf Hering wrote:
> mv643xx_eth has an platform modalias file in sysfs.
> But the module itself has no alias: line. Autoloading fails
> without the alias info in the module.
>
> Signed-off-by: Olaf Hering <[EMAIL PROTECTED]>
Acked-by: Dale Farnsworth <[E
From: Grant Likely <[EMAIL PROTECTED]>
Update MPC5200 drivers to also look for compatible properties in the
form "fsl,mpc5200-*" to better conform to open firmware generic names
recommended practice as published here:
http://www.openfirmware.org/1275/practice/gnames/gnamv14a.html
This patch shou
From: Grant Likely <[EMAIL PROTECTED]>
Most of the embedded board ports select CONFIG_DEFAULT_UIMAGE so that
uImage files get built by default. However, the current code casues
the arch/powerpc/boot/Makefile to be called with the 'uImage' target
and adds 'uImage' to the 'image-y' make variable.
m8xx_calibrate_decr seems to be a misspelled prototype for
mpc8xx_calibrate_decr. As it's not needed anyways, just remove it.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/8xx/m8xx_setup.c |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/ar
On Thu, 17 Jan 2008 13:32:35 +0100
Jochen Friedrich <[EMAIL PROTECTED]> wrote:
> If a freescale watchdog device node is present, reset the watchdog
> while waiting for serial input.
Why ? We normally rely on user space for watchdog management as only the
fact user space is behaving really proves
On Fri, 18 Jan 2008, Olaf Hering wrote:
> calls cache_grow with nodeid 0
> > [c075bbd0] [c00f82d0] .cache_alloc_refill+0x234/0x2c0
> calls cache_grow with nodeid 0
> > [c075bbe0] [c00f7f38] .cache_alloc_node+0x17c/0x1e8
>
> calls cache_grow with nodeid 1
> > [c
Scott Wood schrieb:
>> +void watchdog_poke(void)
>> +{
>> +if (wdt) {
>> +out_be16(&wdt->swsrr, 0x556c);
>> +out_be16(&wdt->swsrr, 0xaa39);
>> +}
>> +}
>
> This should be a function pointer, to allow for other watchdog types.
Thanks for the comments. Stephen Rothwell also
Hi Alan,
>> If a freescale watchdog device node is present, reset the watchdog
>> while waiting for serial input.
>
> Why ? We normally rely on user space for watchdog management as only the
> fact user space is behaving really proves a box is happy ?
This is in the boot wrapper code, not in the
Hello,
> > Do we need `offset' at all?
>
> Looks like no.
>
> I wonder if there's a good argument for adding a pte_offset_val() which
> would let us do:
>
> pteval = pte_offset_val(pmd, addr);
>
> and shrink the map/unmap window and overhead here and possibly
> elsewhere?
>
> Anyway, updated
On Thu, 17 Jan 2008, Olaf Hering wrote:
> early_node_map[1] active PFN ranges
> 1:0 -> 892928
> Could not find start_pfn for node 0
Corrupted min_pfn?
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listin
On Thu, 17 Jan 2008, Olaf Hering wrote:
> Normal 892928 -> 892928
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 1:0 -> 892928
> Could not find start_pfn for node 0
We only have a single node that is node 1? And then we initialize nodes 0
to
Why is l2cr missing from the /proc filesystem in recent 2.6 kernels?
Is it a bug or design decision?
It wasn't necessary since one could set it via a kernel arg however
now that I'm trying to turn on cache in a 7455 and setting l3cr isn't
supported from the command line I was wondering if l3cr was
m8xx_pic_init calls both mpc8xx_pic_init and cpm_pic_init. Renaming the
function to use the same name space as the rest of the mpc8xx
specific funtions and to be more meaningful.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/8xx/ep88xc.c |2 +-
arch/p
Move cpm1 specific prototypes to asm/commproc.h and mpc8xx specific
prototypes to asm/mpc8xx.h. Adjust includes accordingly. Remove now
unneeded sysdev/commproc.h.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/8xx/ep88xc.c |3 +--
arch/powerpc/platfor
Paul,
I collected together all the unapplied PS3 patches into a series
and re-based them to your for-2.6.25 branch.
Patches #14 and #15 are new, but just code cleanups. All other patches
have already been reviewed on the ML and have no outstanding comments
or requests.
Please apply for 2.6.25.
From: Geert Uytterhoeven <[EMAIL PROTECTED]>
The PS3 hypervisor has a storage device notification mechanism to wait until a
storage device is ready. Unfortunately the storage device probing code used
this mechanism in an incorrect way, needing a polling loop and handling of
devices that are not ye
From: Geert Uytterhoeven <[EMAIL PROTECTED]>
PS3: Kill unused routine ps3_repository_bump_device().
Signed-off-by: Geert Uytterhoeven <[EMAIL PROTECTED]>
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/ps3/platform.h |6 --
1 files changed, 6 deletions(-)
---
On Fri, 18 Jan 2008, Olaf Hering wrote:
> calls cache_grow with nodeid 0
> > [c075bbd0] [c00f82d0] .cache_alloc_refill+0x234/0x2c0
> calls cache_grow with nodeid 0
> > [c075bbe0] [c00f7f38] .cache_alloc_node+0x17c/0x1e8
>
> calls cache_grow with nodeid 1
> > [c
On Thu, 17 Jan 2008, Olaf Hering wrote:
> On Thu, Jan 17, Olaf Hering wrote:
>
> > Since -mm boots further, what patch should I try?
>
> rc8-mm1 crashes as well, l3 passed to reap_alien() is NULL.
Sigh. It looks like we need alien cache structures in some cases for nodes
that have no memory. W
On 1/17/08, John Rigby <[EMAIL PROTECTED]> wrote:
> PSCs change from 5200 to 5121
> this patch localizes the differences in
> preparation for adding 5121 support
>
> Signed-off-by: John Rigby <[EMAIL PROTECTED]>
This patch breaks the serial console on my Efika.
g.
--
Grant Likely, B.Sc., P.Eng.
On 1/18/08, Grant Likely <[EMAIL PROTECTED]> wrote:
> On 1/17/08, John Rigby <[EMAIL PROTECTED]> wrote:
> > PSCs change from 5200 to 5121
> > this patch localizes the differences in
> > preparation for adding 5121 support
> >
> > Signed-off-by: John Rigby <[EMAIL PROTECTED]>
>
> This patch breaks t
85 matches
Mail list logo
