board.
>
> Maybe you could update to the newest kernel git tree and try again.
>
> Cheers!
> -zw
>
>> -Original Message-
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]
>> g] On Behalf Of sivaji
>> Sent: Thursday, September 13, 2007 1:32 PM
>>
ginal Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]
> g] On Behalf Of sivaji
> Sent: Thursday, September 13, 2007 1:32 PM
> To: linuxppc-dev@ozlabs.org
> Subject: RE: 2.6.23-rc3 boot hang on MPC8641D
>
>
> Hi,
> Sorry i specify the wro
On Thu, 2007-09-13 at 00:13 -0500, Kumar Gala wrote:
> On Sep 12, 2007, at 11:47 PM, sivaji wrote:
>
> >
> >
> > Hi,
> > I have JTAG Debugger connected to the board. I was given the
> > following commands in the root path of the kernel source
>
> If you can dump memory w/o connecting GD
sed.
>
> - zw
>
>> -Original Message-
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]
>> g] On Behalf Of Kumar Gala
>> Sent: Thursday, September 13, 2007 1:11 PM
>> To: sivaji
>> Cc: linuxppc-dev@ozlabs.org
>> Subject: Re: 2
On Wed, Sep 12, 2007 at 10:24:22PM -0700, sivaji wrote:
>
>
> Hi,
> I am not willing to upgrade the uboot. Becuase it takes some time to
> port the new uboot for my custom boad.
> whether the current problem is related to uboot ? One more point, previously
> i tried 2.6.21 with the same u
Hi,
I am not willing to upgrade the uboot. Becuase it takes some time to
port the new uboot for my custom boad.
whether the current problem is related to uboot ? One more point, previously
i tried 2.6.21 with the same uboot(1.1.6) we got linux prompt but we face
some issue in the pci expr
3, 2007 1:11 PM
> To: sivaji
> Cc: linuxppc-dev@ozlabs.org
> Subject: Re: 2.6.23-rc3 boot hang on MPC8641D
>
>
> On Sep 12, 2007, at 11:52 PM, sivaji wrote:
>
> >
> >
> > Hi,
> > I tired to move the dtb to 0x200, but the result was
> &g
On Sep 12, 2007, at 11:47 PM, sivaji wrote:
>
>
> Hi,
> I have JTAG Debugger connected to the board. I was given the
> following commands in the root path of the kernel source
If you can dump memory w/o connecting GDB, I suggest the following.
Look in your kernel build for System.map
On Sep 12, 2007, at 11:52 PM, sivaji wrote:
>
>
> Hi,
> I tired to move the dtb to 0x200, but the result was
> same.
> uboot version is 1.1.6
seems like a pretty old u-boot. Willing to try a 1.3.0-rc1?
- k
___
Linuxppc-dev mailing lis
Hi,
I tired to move the dtb to 0x200, but the result was same.
uboot version is 1.1.6
by
Sivaji
Zhang Wei-r63237 wrote:
>
> Hi,
>
> Your flat device tree address seems too low. Try to move the dtb to
> higher address such as 0x200.
>
> And which version of your u-boot?
>
Hi,
I have JTAG Debugger connected to the board. I was given the
following commands in the root path of the kernel source
1. ${CROSS_COMPILE}gdb vmlinux
2. I got th GDB prompt after that i give
target remote 172.29.38.213:2001 i got following results
(gdb) target re
Hi,
Your flat device tree address seems too low. Try to move the dtb to
higher address such as 0x200.
And which version of your u-boot?
Cheers!
- zw
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]
> g] On Behalf Of sivaji
> Sent: Thursday, September 13,
On Sep 12, 2007, at 11:18 PM, sivaji wrote:
>
> Hi,
> I am try to boot the 2.6.23-rc3 kernel to my custom board
> based on
> 8641D Processor. After uncompressing the kernel it was hang. I got the
> following messages.
>
>Uncompressing Kernel Image ... OK
>Booting using flat devi
13 matches
Mail list logo
