Hi,
I have JTAG Debugger connected to the board. I was given the
following commands in the root path of the kernel source
1. ${CROSS_COMPILE}gdb vmlinux
2. I got th GDB prompt after that i give
target remote 172.29.38.213:2001 i got following results
(gdb) target remote 172.29.38.213:2001
Remote debugging using 172.29.38.213:2001
Remote packet too long:
deadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbe
0000000000605200000000000060520000000000006052000000000000605200000000000060520000000000006052000000000000605200000000000060520000000000006052000000000000605200000000000060520000000000006052000000000000605200000000000060520000000000006052000000000000605200000000000060520000000000006052000000000000605200000000000060520000000000006052000000000000605200000000000060520000000000006052000000000000605200000000000060520000000000006052000000000000605200000000000060520000000000006052000000000000605200000000fff00100deadbee
Ignoring packet error, continuing...
0xdeadbeef in ?? ()
3.(gdb) b start_kernel
Cannot access memory at address 0xc02b44ec
by
sivaji
Kumar Gala-3 wrote:
>
>
> On Sep 12, 2007, at 11:18 PM, sivaji wrote:
>
>>
>> Hi,
>> I am try to boot the 2.6.23-rc3 kernel to my custom board
>> based on
>> 8641D Processor. After uncompressing the kernel it was hang. I got the
>> following messages.
>>
>> Uncompressing Kernel Image ... OK
>> Booting using flat device tree at 0x600000.
>>
>> Then i tried to debug with GDB. In my source path i given
>> the command
>> ${CROSS_COMPILE}gdb vmlinux, I got GDB Prompt after i tried to set the
>> breakpoint at start_kernel. I got follwing messages
>>
>> gdb) b start_kernel
>> Cannot access memory at address 0xc02b44ec
>
> how are you connecting gdb to the board?
>
> do you have a JTAG debugger connected to the board?
>
> - k
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
>
--
View this message in context:
http://www.nabble.com/2.6.23-rc3-boot-hang-on-MPC8641D-tf4433508.html#a12648671
Sent from the linuxppc-dev mailing list archive at Nabble.com.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
