Tanks to all for the reply to this thread. I got the tip from the thread Tiejun
mentioned.
Quotation: 'St. Strobel' in Xenomai-help
"I had this problem too. In my case the problem was caused by an incorrect port
multiplex configuration in U-Boot, see CONIFG_SYS_GPS_PORT_CONFIG (I use 0x
xxx5xx
Peter wrote:
> Hi all
>
> I got completely stuck with a network adapter problem on my
> ppc board (MPC52xx style). The ntwork adapter does not seem
> to intialize correctly when booted without 'help from uboot'
>
Looks your problem is very similar to one I replied here not long ago :) That is
al
On 11/27/2010 06:31 AM, Peter wrote:
Hi all
I got completely stuck with a network adapter problem on my
ppc board (MPC52xx style). The ntwork adapter does not seem
to intialize correctly when booted without 'help from uboot'
The adapter works properly when I first use it with uboot. E.g.
using
Hi all
I got completely stuck with a network adapter problem on my
ppc board (MPC52xx style). The ntwork adapter does not seem
to intialize correctly when booted without 'help from uboot'
The adapter works properly when I first use it with uboot. E.g.
using tftp to load the kernel or just issuing
