>From: Sparks, Sam
>Sent: Thursday, April 08, 2010 4:15 PM
>
>Howdy All,
>
>I have (almost) successfully upgraded from Linux 2.6.22 to 2.6.26 (both
>downloaded from debian) on my mpc8347 powerpc, but I think I may be
>missing a required change to my dts regarding the IPIC o
>-Original Message-
>From: Sparks, Sam
>Sent: Thursday, April 08, 2010 4:15 PM
In the interest of making it easier for someone to help, I've been able
to replicate the problem with the following minimal kernel module:
#include
#include
#include
static unsigned int cpld
Howdy All,
I have (almost) successfully upgraded from Linux 2.6.22 to 2.6.26 (both
downloaded from debian) on my mpc8347 powerpc, but I think I may be
missing a required change to my dts regarding the IPIC or maybe a change
in how my driver requests IRQs.
I have several modules that are maintaine
>From: Anton Vorontsov
>Sent: Friday, August 01, 2008 11:51 AM
>
>Works like a charm here. I use quite outdated u-boot though. Which one
>you use? I could try it (if it is community u-boot).
I'm using the head, which I grabbed last week: U-Boot
1.3.4-rc1-00012-g1953d12
TIA for checking your itx wi
I'm trying to get the compact flash up and running on an mpc8349eITX,
and am continually running into issues where the IRQ is not processed,
and the mmio commands are not getting response. At this point, I am
starting to suspect a HW issue, but I was hoping to verify that I am
using a known good ke
>From: Sparks, Sam
>Sent: Thursday, July 31, 2008 8:15 AM
>Does irq polling need to be used for compact flash to work
>with this version of the kernel on this board?
When I remove the interrupt definition from the DTS (to cause
irqpolling), the ata driver gets stuck in a loop di
Hello All,
I'm using the latest 2.2.26 kernel image from
linux/kernel/git/benh/powerpc.git on a mpc8349mITX, and trying to get
Compact Flash to work. The kernel booted fine, but I was surprised to
see Compact Flash IRQ was not being handled. Does irq polling need to be
used for compact flash to wo
Which repository on kernel.org should I use to pick up the
latest-greatest software for the mpc8349mITX?
I've tried linux/kernel/git/vitb/linux-2.6-8xx.git, but the dts doesn't
contain compact flash nodes.
I've tried linux/kernel/git/paulus/powerpc.git, but the kernel hangs
while trying to uncomp
> From: Kim Phillips
> Sent: Monday, July 28, 2008 1:31 PM
> > ## Booting kernel from Legacy Image at 01001000 ...
>
> > ## Flattened Device Tree blob at 0100
>
> so the dtb is being loaded only 0x1000 bytes from the kernel,
> yet it's probably bigger than that. Can you try different
> loa
> From: Grant Likely
> Sent: Monday, July 28, 2008 1:03 PM
> Does your dts source file already have a chosen node? There
> had been an issue where u-boot cacks if chosen was pre-created.
Nope, there is no reference to "chosen" in the dts
--Sam
___
Li
> From: Grant Likely
> Sent: Monday, July 28, 2008 12:17 PM
>
> On Mon, Jul 28, 2008 at 11:10:47AM -0500, Sparks, Sam wrote:
> > Hello All,
> >
> > I am trying to boot the mpc8349-mITX board with Compact
> flash support,
> > and am unable to boot
Hello All,
I am trying to boot the mpc8349-mITX board with Compact flash support,
and am unable to boot the Linux kernel. Here is the pertinant versioning
information:
DTC 1.2.0-rc2-g17773b0e
U-Boot 1.3.4-rc1-00012-g1953d12
Linux-2.6.26-05752-g93ded9b
I've built the DTB using the following two co
12 matches
Mail list logo
