This patch provides support to disable and enable platform specific
sensor groups like performance, utilization and frequency which are
not supported in hwmon.
Signed-off-by: Shilpasri G Bhat
---
Changes from V2:
- Rebase on master
Changes from V1:
- As per Michael Ellerman's suggestion, a
export the hard minimum powercap limit to allow the
user to set the appropriate powercap value that can be managed by the
system.
Signed-off-by: Shilpasri G Bhat
---
Changes from V1:
- s/asserted/enforced by OCC
.../ABI/testing/sysfs-firmware-opal-powercap | 10
arch/powerpc/platforms
Hi,
On 02/28/2019 10:14 AM, Daniel Axtens wrote:
> Shilpasri G Bhat writes:
>
>> In POWER9, OCC(On-Chip-Controller) provides for hard and soft system
>> powercapping range. The hard powercap range is guaranteed while soft
>> powercap may or may not be asserted due
hard minimum powercap limit to allow the
user to set the appropriate powercap value that can be managed by the
system.
Signed-off-by: Shilpasri G Bhat
---
.../ABI/testing/sysfs-firmware-opal-powercap | 10
arch/powerpc/platforms/powernv/opal-powercap.c | 66
This patch provides support to disable and enable platform specific
sensor groups like performance, utilization and frequency which are
currently not supported in hwmon.
Signed-off-by: Shilpasri G Bhat
---
Changes from V1:
- As per Michael Ellerman's suggestion, adding the "enable
This patch provides support to disable and enable plaform specific
sensor groups like performance, utilization and frequency which are
currently not supported in hwmon.
Signed-off-by: Shilpasri G Bhat
---
This patch is based on
https://git.kernel.org/powerpc/c/04baaf28f40c68c35a413cd9d0db71
sensors and maintains their values in
main memory.
This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage.
Signed-off-by: Shilpasri G Bhat
[stew...@linux.vnet.ibm.com: Commit message]
---
Changes from v7:
- Use of_for_each_phandle() and
Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat
/lkml/2018/7/15/15
v4 : https://lkml.org/lkml/2018/7/6/379
v3 : https://lkml.org/lkml/2018/7/5/476
v2 : https://lkml.org/lkml/2018/7/4/263
v1 : https://lkml.org/lkml/2018/3/22/214
Shilpasri G Bhat (2):
powernv:opal-sensor-groups: Add support to enable sensor groups
hwmon: ibmpowernv: Add
sensors and maintains their values in
main memory.
This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage.
Signed-off-by: Shilpasri G Bhat
[stew...@linux.vnet.ibm.com: Commit message]
---
Changes from v6:
- Updated the commit message as per
Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat
/2018/7/15/15
v4 : https://lkml.org/lkml/2018/7/6/379
v3 : https://lkml.org/lkml/2018/7/5/476
v2 : https://lkml.org/lkml/2018/7/4/263
v1 : https://lkml.org/lkml/2018/3/22/214
Shilpasri G Bhat (2):
powernv:opal-sensor-groups: Add support to enable sensor groups
hwmon: ibmpowernv: Add attribut
://lkml.org/lkml/2018/7/5/476
v2 : https://lkml.org/lkml/2018/7/4/263
v1 : https://lkml.org/lkml/2018/3/22/214
Shilpasri G Bhat (2):
powernv:opal-sensor-groups: Add support to enable sensor groups
hwmon: ibmpowernv: Add attributes to enable/disable sensor groups
Documentation/hwmon/ibmpowernv
Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat
.
This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage. This patch adds new
per-senor sysfs attribute to disable and enable them.
Signed-off-by: Shilpasri G Bhat
---
Changes from v5:
- Dont store the sensor node and parse the device-tree for
Hi,
On 07/17/2018 07:17 PM, Guenter Roeck wrote:
> On 07/14/2018 11:54 PM, Shilpasri G Bhat wrote:
>> On-Chip-Controller(OCC) is an embedded micro-processor in POWER9 chip
>> which measures various system and chip level sensors. These sensors
>> comprises of environmenta
.
This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage. This patch adds new
per-senor sysfs attribute to disable and enable them.
Signed-off-by: Shilpasri G Bhat
---
Changes from v4:
- As per Mpe's suggestion store device_node inste
Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat
https://lkml.org/lkml/2018/7/6/379
v3 : https://lkml.org/lkml/2018/7/5/476
v2 : https://lkml.org/lkml/2018/7/4/263
v1 : https://lkml.org/lkml/2018/3/22/214
Shilpasri G Bhat (2):
powernv:opal-sensor-groups: Add support to enable sensor groups
hwmon: ibmpowernv: Add attributes to enable/disable s
Signed-off-by: Shilpasri G Bhat
---
Documentation/hwmon/sysfs-interface | 62 +
1 file changed, 62 insertions(+)
diff --git a/Documentation/hwmon/sysfs-interface
b/Documentation/hwmon/sysfs-interface
index fc337c3..f865dd7 100644
--- a/Documentation/hwmon
.
This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage. This patch adds new
per-senor sysfs attribute to disable and enable them.
Signed-off-by: Shilpasri G Bhat
---
Changes from v3:
- Add 'enable' attribute for each sensor
Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat
This patch series adds new attribute to enable or disable a sensor in
runtime.
v3 : https://lkml.org/lkml/2018/7/5/476
v2 : https://lkml.org/lkml/2018/7/4/263
v1 : https://lkml.org/lkml/2018/3/22/214
Shilpasri G Bhat (3):
powernv:opal-sensor-groups: Add support to enable sensor groups
hwmon
Hi,
On 07/05/2018 09:07 PM, Guenter Roeck wrote:
> On 07/05/2018 06:51 AM, Shilpasri G Bhat wrote:
>> On-Chip-Controller(OCC) is an embedded micro-processor in POWER9 chip
>> which measures various system and chip level sensors. These sensors
>> comprises of environmenta
Signed-off-by: Shilpasri G Bhat
---
Documentation/hwmon/ibmpowernv | 35 +++-
Documentation/hwmon/sysfs-interface | 82 +
2 files changed, 115 insertions(+), 2 deletions(-)
diff --git a/Documentation/hwmon/ibmpowernv b/Documentation/hwmon
.
This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage. This patch adds new
per-senor sysfs attribute to disable and enable them.
Signed-off-by: Shilpasri G Bhat
---
Changes from v2:
- Writes to first 'enable' attribute of the se
Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat
This patch series adds new attribute to enable or disable a sensor in
runtime.
v2 : https://lkml.org/lkml/2018/7/4/263
v1 : https://lkml.org/lkml/2018/3/22/214
Shilpasri G Bhat (3):
powernv:opal-sensor-groups: Add support to enable sensor groups
hwmon: ibmpowernv: Add attributes to enable
Hi Guenter,
Thanks for reviewing the patch.
On 07/04/2018 08:16 PM, Guenter Roeck wrote:
>> +/* Disable if last sensor in the group */
>> +send_command = true;
>> +for (i = 0; i < sg->nr_sensor; i++) {
>> +struct sensor_data *sd = sg->sensors[i];
>> +
>> +
.
This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage. This patch adds new
per-senor sysfs attribute to disable and enable them.
Signed-off-by: Shilpasri G Bhat
---
Changes from v1:
- Add per-sensor 'enable' attribute
- Return -EN
Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat
This patch series adds new attribute to enable or disable a sensor in
runtime.
v1 : https://lkml.org/lkml/2018/3/22/214
Shilpasri G Bhat (2):
powernv:opal-sensor-groups: Add support to enable sensor groups
hwmon: ibmpowernv: Add attributes to enable/disable sensor groups
Documentation
On 05/17/2018 06:08 PM, Guenter Roeck wrote:
> On 05/16/2018 11:10 PM, Shilpasri G Bhat wrote:
>>
>>
>> On 05/15/2018 08:32 PM, Guenter Roeck wrote:
>>> On Thu, Mar 22, 2018 at 04:24:32PM +0530, Shilpasri G Bhat wrote:
>>>> This patch series adds suppo
On 05/15/2018 08:32 PM, Guenter Roeck wrote:
> On Thu, Mar 22, 2018 at 04:24:32PM +0530, Shilpasri G Bhat wrote:
>> This patch series adds support to enable/disable OCC based
>> inband-sensor groups at runtime. The environmental sensor groups are
>> managed in HWMON and t
This patch exports the accumulated power numbers of each power
sensor maintained by OCC.
Signed-off-by: Shilpasri G Bhat
---
drivers/hwmon/ibmpowernv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
index 74d9b5a..0298745 100644
The firmware has supported for reading sensor values of size u32.
This patch adds support to use newer firmware functions which allows
to read the sensors of size u64.
Signed-off-by: Shilpasri G Bhat
---
drivers/hwmon/ibmpowernv.c | 7 ---
1 file changed, 4 insertions(+), 3 deletions
This patch adds support to read 64-bit sensor values. This method is
used to read energy sensors and counters which are of type u64.
Signed-off-by: Shilpasri G Bhat
---
arch/powerpc/include/asm/opal-api.h| 1 +
arch/powerpc/include/asm/opal.h| 2 +
arch/powerpc
This patch series provides support for adding energy sensors to
ibmpowernv-hwmon driver. This patch adds support to read 64bit
sensor values.
Shilpasri G Bhat (3):
powernv: opal-sensor: Add support to read 64bit sensor values
hwmon: (ibmpowernv): Add support to read 64 bit sensors
hwmon
652f13 (timers, cpufreq/powernv: Initialize the gpstate timer as
pinned)
Cc: [4.8+]
Reported-by: Nicholas Piggin
Reported-by: Pridhiviraj Paidipeddi
Signed-off-by: Shilpasri G Bhat
---
Changes from V2:
- Remove the check for active policy while requeing the migrated timer
Changes from V1:
-
Hi,
On 04/25/2018 02:47 PM, Viresh Kumar wrote:
> On 25-04-18, 14:32, Shilpasri G Bhat wrote:
>> gpstate_timer_handler() uses synchronous smp_call to set the pstate
>> on the requested core. This causes the below hard lockup:
>>
>> [c03fe566b320] [c01d534
652f13 (timers, cpufreq/powernv: Initialize the gpstate timer as
pinned)
Cc: [4.8+]
Reported-by: Nicholas Piggin
Reported-by: Pridhiviraj Paidipeddi
Signed-off-by: Shilpasri G Bhat
---
Changes from V1:
- Remove smp_call in the pstate handler.
drivers/cpufreq/powernv-cpufreq.
POWER9 doesnot support global pstate requests for the chip. So remove
the timer logic which slowly ramps down the global pstate in P9
platforms.
Signed-off-by: Shilpasri G Bhat
---
drivers/cpufreq/powernv-cpufreq.c | 23 ++-
1 file changed, 18 insertions(+), 5 deletions
On 04/24/2018 01:01 PM, Nicholas Piggin wrote:
> On Tue, 24 Apr 2018 12:47:32 +0530
> Shilpasri G Bhat wrote:
>
>> Hi,
>>
>> On 04/24/2018 11:30 AM, Nicholas Piggin wrote:
>>> On Tue, 24 Apr 2018 10:11:46 +0530
>>> Shilpasri G Bhat wrote:
>>
Hi,
On 04/24/2018 11:30 AM, Nicholas Piggin wrote:
> On Tue, 24 Apr 2018 10:11:46 +0530
> Shilpasri G Bhat wrote:
>
>> gpstate_timer_handler() uses synchronous smp_call to set the pstate
>> on the requested core. This causes the below hard lockup:
>>
>> [c0
Hi,
On 04/24/2018 10:40 AM, Stewart Smith wrote:
> Shilpasri G Bhat writes:
>> gpstate_timer_handler() uses synchronous smp_call to set the pstate
>> on the requested core. This causes the below hard lockup:
>>
>> [c03fe566b320] [c01d5340] smp_call_
ff-by: Shilpasri G Bhat
---
drivers/cpufreq/powernv-cpufreq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpufreq/powernv-cpufreq.c
b/drivers/cpufreq/powernv-cpufreq.c
index 0591874..7e0c752 100644
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpuf
.
This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage. This patch adds new
sysfs attributes to disable and enable them.
Signed-off-by: Shilpasri G Bhat
---
- Should the new attributes be added to hwmon_chip_attrs[]?
Documentation/hwmon
This patch provides support to disable and enable plaform specific
sensor groups like performance, utilization and frequency.
Signed-off-by: Shilpasri G Bhat
---
.../ABI/testing/sysfs-firmware-opal-sensor-groups | 34 +
.../powerpc/platforms/powernv/opal-sensor-groups.c | 80
Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat
://lists.ozlabs.org/pipermail/skiboot/2018-March/010812.html
Shilpasri G Bhat (3):
powernv:opal-sensor-groups: Add support to enable sensor groups
hwmon: ibmpowernv: Add attributes to enable/disable sensor groups
powernv: opal-sensor-groups: Add attributes to disable/enable sensors
.../ABI
Adds support to enable/disable a sensor group. This can be used to
select the sensor groups that needs to be copied to main memory by
OCC. Sensor groups like power, temperature, current, voltage,
frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat
Hi,
On 02/12/2018 03:59 PM, Viresh Kumar wrote:
> On 12-02-18, 15:51, Shilpasri G Bhat wrote:
>> This patch fixes the below Coverity warning:
>>
>> *** CID 182816: Memory - illegal accesses (NEGATIVE_RETURNS)
>> /drivers/cpufreq/powernv-cpufreq.c: 1008 in po
;.
1008freq_data.pstate_id = powernv_freqs[index].driver_data;
1009freq_data.gpstate_id = powernv_freqs[index].driver_data;
1010set_pstate(&freq_data);
1011
1012return powernv_freqs[index].frequency;
1013 }
Signed-off-by: Shilpasri G Bhat
---
dr
ernv: Replacing pstate_id with frequency
table index")
Reported-by: Alvin Wang
Signed-off-by: Shilpasri G Bhat
---
drivers/cpufreq/powernv-cpufreq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/cpufreq/powernv-cpufreq.c
b/drivers/cpufreq/powernv-cpu
Hi,
On 12/04/2017 10:11 AM, Stewart Smith wrote:
> Shilpasri G Bhat writes:
>> On 11/28/2017 05:07 PM, Michael Ellerman wrote:
>>> Shilpasri G Bhat writes:
>>>
>>>> Adds support to enable/disable a sensor group. This can be used to
>>>> selec
From: "Gautham R. Shenoy"
Pstates are 8bit values but on POWER8 they are negative and on POWER9
they are positive. This patch adds helper routines to differentiate
the sign to read the correct pstate value.
Signed-off-by: Gautham R. Shenoy
Tested-by: Shilpasri G Bhat
---
drive
Hi,
On 11/28/2017 05:07 PM, Michael Ellerman wrote:
> Shilpasri G Bhat writes:
>
>> Adds support to enable/disable a sensor group. This can be used to
>> select the sensor groups that needs to be copied to main memory by
>> OCC. Sensor groups like power, tempe
Adds support to enable/disable a sensor group. This can be used to
select the sensor groups that needs to be copied to main memory by
OCC. Sensor groups like power, temperature, current, voltage,
frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat
---
The
This driver provides interface to mmap the OCC sensor area
to userspace to parse and read OCC inband sensors.
Signed-off-by: Shilpasri G Bhat
---
- The skiboot patch for this is posted here:
https://lists.ozlabs.org/pipermail/skiboot/2017-September/009209.html
arch/powerpc/platforms/powernv
power shifting ratio
3) Clear min/max for OCC sensor groups
Changes from V10:
- Rebased on powerpc-next
- Add sysfs interface instead of IOCTL
(Skiboot patch for Patch3 is posted below:
https://lists.ozlabs.org/pipermail/skiboot/2017-August/008553.html )
Shilpasri G Bhat (3):
powernv: powercap
Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.
Signed-off-by: Shilpasri G Bhat
---
.../bindings/powerpc/opal/sensor
Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.
Signed-off-by: Shilpasri G Bhat
---
.../ABI/testing/sysfs-firmware-opal-powercap | 31 +++
arch/powerpc/include/asm/opal-api.h| 3 +
arch/powerpc/include
This patch adds support to set power-shifting-ratio which hints the
firmware how to distribute/throttle power between different entities
in a system (e.g CPU v/s GPU). This ratio is used by OCC for power
capping algorithm.
Signed-off-by: Shilpasri G Bhat
---
Documentation/ABI/testing/sysfs
power shifting ratio
3) Clear min/max for OCC sensor groups
Changes from V9:
- Fixed return after erroring from mutex_lock_interruptible()
- Added documentation
- [RESEND] Fixed the version number of the patch-set in Subject
Shilpasri G Bhat (3):
powernv: powercap: Add support for powercap
Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.
Signed-off-by: Shilpasri G Bhat
---
.../bindings/powerpc/opal/sensor
This patch adds support to set power-shifting-ratio which hints the
firmware how to distribute/throttle power between different entities
in a system (e.g CPU v/s GPU). This ratio is used by OCC for power
capping algorithm.
Signed-off-by: Shilpasri G Bhat
---
Documentation/ABI/testing/sysfs
Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.
Signed-off-by: Shilpasri G Bhat
---
.../ABI/testing/sysfs-firmware-opal-powercap | 31 +++
arch/powerpc/include/asm/opal-api.h| 5 +-
arch/powerpc/include
Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.
Signed-off-by: Shilpasri G Bhat
---
.../ABI/testing/sysfs-firmware-opal-powercap | 31 +++
arch/powerpc/include/asm/opal-api.h| 5 +-
arch/powerpc/include
Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.
Signed-off-by: Shilpasri G Bhat
---
.../bindings/powerpc/opal/sensor
This patch adds support to set power-shifting-ratio which hints the
firmware how to distribute/throttle power between different entities
in a system (e.g CPU v/s GPU). This ratio is used by OCC for power
capping algorithm.
Signed-off-by: Shilpasri G Bhat
---
Documentation/ABI/testing/sysfs
power shifting ratio
3) Clear min/max for OCC sensor groups
Changes from V9:
- Fixed return after erroring from mutex_lock_interruptible()
- Added documentation
Shilpasri G Bhat (3):
powernv: powercap: Add support for powercap framework
powernv: Add support to set power-shifting-ratio
powernv
Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.
Signed-off-by: Shilpasri G Bhat
---
Changes from V8:
- Use
This patch adds support to set power-shifting-ratio which hints the
firmware how to distribute/throttle power between different entities
in a system (e.g CPU v/s GPU). This ratio is used by OCC for power
capping algorithm.
Signed-off-by: Shilpasri G Bhat
---
Changes from V8:
- Use __pa() while
Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.
Signed-off-by: Shilpasri G Bhat
---
Changes from V8:
- Use __pa() while passing pointer in opal call
- Use mutex_lock_interruptible()
- Fix error codes returned to user
- Allocate
power shifting ratio
3) Clear min/max for OCC sensor groups
Shilpasri G Bhat (3):
powernv: powercap: Add support for powercap framework
powernv: Add support to set power-shifting-ratio
powernv: Add support to clear sensor groups data
arch/powerpc/include/asm/opal-api.h| 8
Hi Cyril,
On 07/28/2017 07:09 AM, Cyril Bur wrote:
> Is there any reason that pcap_attrs needs to be contiguous? If not, I
> feel like you could eliminate the entire loop below (and the last one
> as well maybe) and just do the assignment of pattr_groups[].attrs[] up
> there.
>
> In fact do you e
In P9, OCC allows for clearing the sensor min-max history. This patch
exports attribute to reset history when set will clear the history of
all the sensors owned by CSM and belonging to the chip.
Signed-off-by: Shilpasri G Bhat
---
This patch is on top of this patchset:
https://www.mail
Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.
Signed-off-by: Shilpasri G Bhat
---
Changes from V7:
- s/send_occ_command
This patch adds support to set power-shifting-ratio for CPU-GPU which
is used by OCC power capping algorithm.
Signed-off-by: Shilpasri G Bhat
---
Changes from V7:
- Replaced sscanf with kstrtoint
arch/powerpc/include/asm/opal-api.h| 4 +-
arch/powerpc/include/asm/opal.h
Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.
Signed-off-by: Shilpasri G Bhat
---
Changes from V7:
- Replaced sscanf with kstrtoint
arch/powerpc/include/asm/opal-api.h| 5 +-
arch/powerpc/include/asm/opal.h
power shifting ratio
3) Clear min/max for OCC sensor groups
The skiboot patch for this interface is posted here:
https://lists.ozlabs.org/pipermail/skiboot/2017-July/008352.html
Shilpasri G Bhat (3):
powernv: powercap: Add support for powercap framework
powernv: Add support to set power-shifting
Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.
Signed-off-by: Shilpasri G Bhat
---
Changes from V6:
- Removed a generic
This patch adds support to set power-shifting-ratio for CPU-GPU which
is used by OCC power capping algorithm.
Signed-off-by: Shilpasri G Bhat
---
arch/powerpc/include/asm/opal-api.h| 4 +-
arch/powerpc/include/asm/opal.h| 3 +
arch/powerpc/platforms/powernv
Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.
Signed-off-by: Shilpasri G Bhat
---
arch/powerpc/include/asm/opal-api.h| 5 +-
arch/powerpc/include/asm/opal.h| 4 +
arch/powerpc/platforms/powernv
power shifting ratio
3) Clear min/max for OCC sensor groups
The skiboot patch for this interface is posted here:
https://lists.ozlabs.org/pipermail/skiboot/2017-July/008293.html
Shilpasri G Bhat (3):
powernv: powercap: Add support for powercap framework
powernv: Add support to set power-shifting
Hi,
On 06/30/2017 12:02 AM, Shilpasri G Bhat wrote:
> In P9, OCC (On-Chip-Controller) supports shared memory based
> commad-response interface. Within the shared memory there is an OPAL
> command buffer and OCC response buffer that can be used to send
> inband commands to OCC. This
between OCC and the host.
Signed-off-by: Shilpasri G Bhat
Reviewed-by: Cyril Bur
---
Changes from V5:
- Rebased the opal_call to match the skiboot-master.
Not sure if I need to add the IMC based OPAL call numbers [148-151] so I
have not included them in this patch (which are already upstream in
On 06/27/2017 10:05 AM, Cyril Bur wrote:
> On Mon, 2017-06-26 at 11:02 +0530, Shilpasri G Bhat wrote:
>> In P9, OCC (On-Chip-Controller) supports shared memory based
>> commad-response interface. Within the shared memory there is an OPAL
>> command buffer and OCC response bu
between OCC and the host.
Signed-off-by: Shilpasri G Bhat
---
The skiboot patch for the interface is posted here:
https://lists.ozlabs.org/pipermail/skiboot/2017-June/007960.html
Changes from V4:
- Add token as a parameter to the opal_occ_command()
- Use per-occ counter for command request_id instead
Hi Cyril,
On 06/22/2017 06:28 AM, Cyril Bur wrote:
> On Wed, 2017-06-21 at 13:36 +0530, Shilpasri G Bhat wrote:
>> In P9, OCC (On-Chip-Controller) supports shared memory based
>> commad-response interface. Within the shared memory there is an OPAL
>> command buffer and OCC
between OCC and the host.
Signed-off-by: Shilpasri G Bhat
---
- Hold occ->cmd_in_progress in read()
- Reset occ->rsp_consumed if copy_to_user() fails
arch/powerpc/include/asm/opal-api.h| 41 +++-
arch/powerpc/include/asm/opal.h| 3 +
arch/powerpc/platforms/p
This patch adds support to get a unique token for async completion
requests. This will be used for creating non-repititive request
handles for consecutive requests in OPAL-OCC command/response
interface.
Signed-off-by: Shilpasri G Bhat
---
- No changes from V3
arch/powerpc/include/asm/opal.h
/007705.html
Shilpasri G Bhat (2):
powerpc/powernv: Get a unique token for async completions
powerpc/powernv : Add support for OPAL-OCC command/response interface
arch/powerpc/include/asm/opal-api.h| 41 +++-
arch/powerpc/include/asm/opal.h| 4 +
arch/powerpc
On 06/20/2017 11:36 AM, Cédric Le Goater wrote:
> On 06/20/2017 07:08 AM, Shilpasri G Bhat wrote:
>> From: Cédric Le Goater
>>
>> Today, the type of a PowerNV sensor system is determined with the
>> "compatible" property for legacy Firmwares and with the
This patch exports current(A) sensors in inband sensors copied to
main memory by OCC.
Signed-off-by: Shilpasri G Bhat
---
Changes from V1:
- Rebased on top of Cedric's patch to remove legay-compatible type for
the current(A) sensor.
drivers/hwmon/ibmpowernv.c | 4 +++-
1 file chang
uce new sensor types.
Let's introduce two different arrays (legacy and current) to make
things easier for new sensor types.
Signed-off-by: Cédric Le Goater
Tested-by: Shilpasri G Bhat
---
drivers/hwmon/ibmpowernv.c | 26 ++
1 file changed, 18 insertions(+), 8 deletions
The first patch from Cedric in the patchset cleans up the driver to
provide a neater way to define new sensor types. The second patch adds
current sensor.
Cédric Le Goater (1):
hwmon: (ibmpowernv) introduce a legacy_compatibles array
Shilpasri G Bhat (1):
hwmon: (ibmpowernv) Add current(A
Hi Cedric,
On 06/19/2017 06:22 PM, Cédric Le Goater wrote:
> On 06/19/2017 11:25 AM, Shilpasri G Bhat wrote:
>> This patch exports current(A) sensors in inband sensors copied to
>> main memory by OCC.
>>
>> Signed-off-by: Shilpasri G Bhat
>> ---
>> drivers
This patch exports current(A) sensors in inband sensors copied to
main memory by OCC.
Signed-off-by: Shilpasri G Bhat
---
drivers/hwmon/ibmpowernv.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
index 862b832
between OCC and the host.
Signed-off-by: Shilpasri G Bhat
---
Changes from V2:
- Use atomic_set while dropping locks
- Add rsp_consumed flag to protect the read()
- Change the logging level of prints
- Add MAX_POSSIBLE_CHIPS
- Move the endian conversion of data to opal_occ_cmd_prepare()
arch/powerpc
1 - 100 of 234 matches
Mail list logo
