Signed-off-by: Shilpasri G Bhat <shilpa.b...@linux.vnet.ibm.com>
---
Documentation/hwmon/sysfs-interface | 62 +++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/Documentation/hwmon/sysfs-interface
b/Documentation/hwmon/sysfs-interface
index fc337c3..f865dd7 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -171,6 +171,15 @@ in[0-*]_label Suggested voltage channel label.
user-space.
RO
+in[0-*]_enable
+ Enable or disable the sensors.
+ When disabled the sensor read will return -ENODATA. This
+ attribute can be used as per-sensor or per-sub-group attribute
+ depending on what is supported by the hardware.
+ 1: Enable
+ 0: Disable
+ RW
+
cpu[0-*]_vid CPU core reference voltage.
Unit: millivolt
RO
@@ -236,6 +245,15 @@ fan[1-*]_label Suggested fan channel label.
In all other cases, the label is provided by user-space.
RO
+fan[1-*]_enable
+ Enable or disable the sensors.
+ When disabled the sensor read will return -ENODATA. This
+ attribute can be used as per-sensor or per-sub-group attribute
+ depending on what is supported by the hardware.
+ 1: Enable
+ 0: Disable
+ RW
+
Also see the Alarms section for status flags associated with fans.
@@ -409,6 +427,15 @@ temp_reset_history
Reset temp_lowest and temp_highest for all sensors
WO
+temp[1-*]_enable
+ Enable or disable the sensors.
+ When disabled the sensor read will return -ENODATA. This
+ attribute can be used as per-sensor or per-sub-group attribute
+ depending on what is supported by the hardware.
+ 1: Enable
+ 0: Disable
+ RW
+
Some chips measure temperature using external thermistors and an ADC, and
report the temperature measurement as a voltage. Converting this voltage
back to a temperature (or the other way around for limits) requires
@@ -468,6 +495,15 @@ curr_reset_history
Reset currX_lowest and currX_highest for all sensors
WO
+curr[1-*]_enable
+ Enable or disable the sensors.
+ When disabled the sensor read will return -ENODATA. This
+ attribute can be used as per-sensor or per-sub-group attribute
+ depending on what is supported by the hardware.
+ 1: Enable
+ 0: Disable
+ RW
+
Also see the Alarms section for status flags associated with currents.
*********
@@ -566,6 +602,15 @@ power[1-*]_crit Critical maximum power.
Unit: microWatt
RW
+power[1-*]_enable Enable or disable the sensors.
+ When disabled the sensor read will return
+ -ENODATA. This attribute can be used as
+ per-sensor or per-sub-group attribute depending
+ on what is supported by the hardware.
+ 1: Enable
+ 0: Disable
+ RW
+
Also see the Alarms section for status flags associated with power readings.
**********
@@ -576,6 +621,14 @@ energy[1-*]_input Cumulative energy use
Unit: microJoule
RO
+energy[1-*]_enable Enable or disable the sensors.
+ When disabled the sensor read will return
+ -ENODATA. This attribute can be used as
+ per-sensor or per-sub-group attribute depending
+ on what is supported by the hardware.
+ 1: Enable
+ 0: Disable
+ RW
************
* Humidity *
@@ -586,6 +639,15 @@ humidity[1-*]_input Humidity
RO
+humidity[1-*]_enable Enable or disable the sensors
+ When disabled the sensor read will return
+ -ENODATA. This attribute can be used as
+ per-sensor or per-sub-group attribute depending
+ on what is supported by the hardware.
+ 1: Enable
+ 0: Disable
+ RW
+
**********
* Alarms *
**********
--
1.8.3.1
